Model Number Structure
|
|
- Charlotte Cross
- 5 years ago
- Views:
Transcription
1 Solid-sae Muli-funcional Timer H3CR-A Timers DIN 48 x 48-mm Sae-of-he-ar Mulifuncional Timer A wider power range reduces he number of imer models kep in sock. A wide range of applicaions hrough six or four operaing modes. Reduced power consumpion. (Excep for H3CR-A8E) Enables easy sequence checks hrough insananeous oupus for a zero se value a any ime range. Lengh, when panel-mouned wih a Socke, of 80 mm or less. Time Seing Rings enable consisen seings and limi he seing range. Panel Covers enable various panel designs. PNP inpu models available. Rich variey of inpus:, rese, and gae funcions (11-pin models and -AP models) Model Number Srucure Model Number Legend H3CR-A@@@-@ Number of Pins None: 11-pin models 8: 8-pin models. Inpu Type for 11-pin Models None: No-volage inpu (NPN ype) P: Volage inpu (PNP ype) 3. Oupu None: Relay oupu (DPDT) S: Transisor oupu (NPN/PNP universal use) E: Relay oupu (SPDT) wih insananeous relay oupu (SP- DT) 4. Suffix 300: Dual mode models (signal ON/OFF-delay and one-sho) 301: Double ime scale (range) models (0.1 s o 600 h) Solid-sae Muli-funcional Timer H3CR-A B-109
2 Ordering Informaion Lis of Models 11-pin Models Conac Oupu Supply volage Inpu ype Time range Operaing mode (see noe ) Transisor (Phoocoupler) 8-pin Models Conac 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC No-volage inpu 0.05 s o 300 h Six muli-modes: A, B, B, C, D, E Dual-modes: G, J Volage inpu Six muli-modes: A, B, B, C, D, E H3CR-A Model H3CR-A-300 H3CR-AP No-volage inpu 0.1 s o 600 h H3CR-A s o 300 h H3CR-AS Oupu Supply volage Inpu ype Time range Operaing mode (see noe ) Transisor (Phoocoupler) Time-limi conac and insananeous conac 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 4 o 48 VAC (50/60 Hz)/ 1 o 48 VDC 100 o 40 VAC (50/60 Hz)/ 100 o 15 VDC 4 o 48 VDC/VAC (50/60 Hz) No-inpu available 0.05 s o 300 h Four muli-modes: A, B, E, J ( sar) Model H3CR-A8 0.1 s o 600 h H3CR-A s o 300 h H3CR-A8S H3CR-A8E Noe: 1. Specify boh he model number and volage when ordering. Example: H3CR-A 100 o 40 VAC (50/60 Hz)/100 o 15 VDC Supply volage. The operaing modes are as follows A: ON-delay D: Signal OFF-delay B: Flicker OFF sar E: Inerval B: Flicker ON sar G: Signal ON/OFF-delay C: Signal ON/OFF-delay J: One-sho B-110 Solid-sae Muli-funcional Timer H3CR-A
3 Accessories (Order Separaely) Name/specificaions Models Flush Mouning Adaper Y9F-30 Y9F-73 Y9F-74 Mouning Track 50 cm (l) x 7.3 mm () PFP-50N 1 m (l) x 7.3 mm () PFP-100N 1 m (l) x 16 mm () PFP-100N End Plae PFP-M Spacer PFP-S Proecive Cover Y9A-48B Track Mouning/ 8-pin PCF-08 Fron Connecing Socke 8-pin, finger safe ype PCF-08-E 11-pin PCF pin, finger safe ype PCF-11-E Back Connecing Socke 8-pin P3G-08 8-pin, finger safe ype P3G-08 wih Y9A-48G (see noe 1) 11-pin P3GA pin, finger safe ype P3GA-11 wih Y9A-48G (see noe 1) Time Seing Ring Seing a specific ime Y9S-7 Limiing he seing range Y9S-8 Panel Cover (see noe ) Ligh gray (5Y7/1) Y9P-48GL Black (N1.5) Y9P-48GB Medium gray (5Y5/1) Y9P-48GM Hold-down Clip (see noe 3) For PL08 and PL11 Sockes Y9H-7 For PF085A Socke Y9H-8 Timers Noe: 1. Y9A-48G is a finger safe erminal cover which is aached o he P3G-08 or P3GA-11 Socke.. The Time Seing Ring and Panel Cover are sold ogeher. 3. Hold-down Clips are sold in ses of wo. Specificaions General Iem H3CR-A/-AS H3CR-AP H3CR-A8/-A8S H3CR-A8E Operaing mode A: ON-delay B: Flicker OFF sar B: Flicker ON sar C: Signal ON/OFF-delay D: Signal OFF-delay E: Inerval G: Signal ON/OFF-delay (Only for H3CR-A-300) J: One-sho (Only for H3CR-A-300) A: ON-delay (power sar) B: Flicker ON sar (power sar) E: Inerval (power sar) J: One-sho (power sar) Pin ype 11-pin 8-pin Inpu ype No-volage inpu Volage inpu --- Time-limi oupu ype H3CR-A/-A8/-AP:Relay oupu (DPDT) Relay oupu (SPDT) H3CR-AS/-A8S: Transisor oupu (NPN/PNP universal)* Insananeous oupu --- Relay oupu (SPDT) ype Mouning mehod DIN rack mouning, surface mouning, and flush mouning Approved sandards UL508, CSA C. No.14, NK, Lloyds Conforms o EN and IEC (VDE0110) 4kV/. Oupu caegory according o EN for Timers wih Conac Oupus. Oupu caegory according o EN for Timers wih Transisor Oupus. *The inernal s are opically isolaed from he oupu. This enables universal applicaion as NPN or PNP ransisor. Solid-sae Muli-funcional Timer H3CR-A B-111
4 Time Ranges Noe: When he ime seing knob is urned below 0 unil he poin where he ime seing knob sops, he oupu will operae insananeously a all ime range seings. Sandard (0.05-s o 300-h) Models Time uni s (sec) min (min) h (hrs) x10 h (10 h) Full scale seing o o o o 3 3 o o 1 1 o o o 300 Double (0.1-s o 600-h) Models Time uni s (sec) min (min) h (hrs) x10 h (10 h) Full scale seing o o.4.4 o o 6 6 o o 4 4 o o o 600 Raings Raed volage (see noe 1) Operaing volage range rese Inpu consumpion 100 o 40 VAC (50/60 Hz)/100 o 15 VDC, 4 o 48 VAC (50/60 Hz)/1 o 48 VDC (4 o 48 VAC/VDC for H3CR- A8E) (see noe ) 85% o 110% of raed volage (90% o 110% a 1 VDC) Minimum power-opening ime: 0.1 s No-volage Inpu ON impedance: 1 kω max. ON residual volage: 1 V max. OFF impedance: 100 kω min. Volage Inpu Max. permissible capaciance beween inpus lines (erminals 6 and 7): 1,00 pf Load connecable in parallel wih inpus (erminals 6 and 7). 100 o 40 VAC/100 o 15 VDC High (logic) level: 85 o 64 VAC/85 o VDC Low (logic) level: 0 o 10 VAC/0 o 10 VDC 4 o 48 VAC/1 o 48 VDC High (logic) level: 0.4 o 5.8 VAC/10.8 o 5.8 VDC Low (logic) level: 0 o.4 VAC/0 o 1. VDC H3CR-A/-A8 100 o 40 VAC/100 o 15 VDC (When a 40 VAC, 60 Hz) Relay ON: approx..0 VA (1.6 W) Relay OFF: approx. 1.3 VA (1.1 W) 4 o 48 VAC/1 o 48 VDC (When a 4 VDC) Relay ON: approx. 0.8 W Relay OFF: approx. 0. W H3CR-AP (see noe 3) 100 o 40 VAC/100 o 15 VDC (When a 40 VAC, 60 Hz) Relay ON: approx..5 VA (. W) Relay OFF: approx. 1.8 VA (1.7 W) 4 o 48 VAC/1 o 48 VDC (When a 4 VDC) Relay ON: approx. 0.9 W Relay OFF: approx. 0.3 W H3CR-A8E 100 o 40 VAC/100 o 15 VDC (When a 40 VAC, 60 Hz) Relay ON/OFF: approx. VA (0.9 W) 4 o 48 VAC/VDC (When a 4 VDC) Relay ON/OFF: approx. 0.9 W H3CR-AS/-A8S 4 o 48 VAC/1 o 48 VDC (When a 4 VDC) Oupu ON: 0.3 W Oupu OFF: 0. W Conrol oupus Time limi conacs: 5 A a 50 VAC/30 VDC, 0.15 A a 15 VDC, resisive load (cosφ = 1) Transisor oupu: Open collecor (NPN/PNP), 100 ma max. a 30 VDC max., residual volage: V max. Insananeous conac: 5 A a 50 VAC/30 VDC, 0.15 A a 15 VDC, resisive load (cosφ = 1) Noe: 1. DC ripple rae: 0% max. if he power incorporaes a single-phase, full-wave recifier.. Each 4-o-48-VAC/1-o-48-VDC model causes an inrush curren of approximaely 0.85 A. Pay careful aenion when aemping o urn ON power o such a model wih non-conac oupu from a device such as a sensor. 3. The values are for when he erminals and 7 and erminals 10 and 6 are shor-ed, and include he consumpion curren of he inpu. B-11 Solid-sae Muli-funcional Timer H3CR-A
5 Characerisics Accuracy of operaing ±0.% FS max. (±0.%±10 ms max. in a range of 1. s) ime Seing error ±5% FS ±50 ms (see noe 1) Rese ime Min. power-opening ime: 0.1 s max. Min. pulse widh: 0.05 s (H3CR-A/-AS) Rese volage 10% max. of raed volage Influence of volage ±0.% FS max. (±0.%±10 ms max. in a range of 1. s) Influence of emperaure ±1% FS max. (±1%±10 ms max. in a range of 1. s) Insulaion resisance 100 MΩ min. (a 500 VDC) Dielecric srengh,000 VAC (1,000 VAC for H3CR-A@S), 50/60 Hz for 1 min (beween curren-carrying meal pars and exposed noncurren-carrying meal pars),000 VAC (1,000 VAC for H3CR-A@S), 50/60 Hz for 1 min (beween conrol oupu erminals and operaing ),000 VAC, 50/60 Hz for 1 min (beween conacs of differen polariies) 1,000 VAC, 50/60 Hz for 1 min (beween conacs no locaed nex o each oher),000 VAC, 50/60 Hz for 1 min (beween inpu and conrol oupu erminals and operaion ) for H3CR-AP Impulse wihsand volage 3 kv (beween power erminals) for 100 o 40 VAC/100 o 15 VDC, 1 kv for 4 o 48 VAC/1 o 48 VDC 4.5 kv (beween curren-carrying erminal and exposed non-curren-carrying meal pars) for 100 o 40 VAC/100 o 15 VDC, 1.5 kv for 4 o 48 VAC/1 o 48 VDC and 4 o 48 VAC/VDC Noise immuniy ±1.5 kv (beween power erminals) and ±600 V (beween no-volage inpu erminals), square-wave noise by noise simulaor (pulse widh: 100 ns/1 µs, 1-ns rise) Saic immuniy Malfuncion: 8 kv Desrucion: 15 kv Vibraion resisance Desrucion: 10 o 55 Hz wih 0.75-mm single ampliude each in 3 direcions for hours each Malfuncion: 10 o 55 Hz wih 0.5-mm single ampliude each in 3 direcions for 10 minues each Shock resisance Desrucion: 1,000 m/s 3 imes each in 6 direcions Malfuncion: 100 m/s 3 imes each in 6 direcions Ambien emperaure Operaing: 10 C o 55 C (wih no icing) Sorage: 5 C o 65 C (wih no icing) Ambien humidiy Operaing: 35% o 85% Life expecancy Mechanical: 0,000,000 operaions min. (under no load a 1,800 operaions/h) Elecrical: 100,000 operaions min. (5 A a 50 VAC, resisive load a 1,800 operaions/h) (see noe ) EMC (EMI) EN Emission Enclosure: EN55011 Group 1 class A Emission AC Mains: EN55011 Group 1 class A (EMS) EN Immuniy ESD: IEC : 6 kv conac discharge (level 3) 8 kv air discharge (level 3) Immuniy RF-inerference from AM Radio Waves: IEC :10 V/m (80 MHz o 1 GHz) (level 3) Immuniy RF-inerference from Pulse-modulaed Radio Waves:IEC :10 V/m (900±5 MHz) (level 3) Immuniy Conduced Disurbance: IEC : 10 V (0.15 o 80 MHz) (level 3) Immuniy Burs: IEC : kv power-line (level 3) kv I/O signal-line (level 4) Immuniy Surge: IEC : 1 kv line o line (level 3) kv line o ground (level 3) Case color Ligh gray (Munsell 5Y7/1) Degree of proecion IP40 (panel surface) Weigh Approx. 90 g Timers Noe: 1. The value is ±5% FS +100 ms o 0 ms max. when he C, D, or G mode signal of he H3CR-AP is OFF.. Refer o he Life-es Curve. Solid-sae Muli-funcional Timer H3CR-A B-113
6 Life-es Curve 10,000 Swiching operaions (x 10 3 ) 5,000 1, VDC L/R = 7 ms 50 VAC (cosφ = 0.4) 50 VAC/30 VDC (cosφ = 1) Reference: A maximum curren of 0.15 A can be swiched a 15 VDC (cosφ = 1) and a maximum curren of 0.1 A can be swiched if L/R is 7 ms. In boh cases, a life of 100,000 operaions can be expeced. The minimum applicable load is 10 ma (100 ma for H3CR-A8E) a 5 VDC (failure level: P). Load curren (A) B-114 Solid-sae Muli-funcional Timer H3CR-A
7 Connecions Block Diagrams H3CR-A/AS AC (DC) inpu Zero seing deecion Time range/ uni selecors Operaing mode selecor Timers Oscillaion Couning Oupu Rese inpu, sar inpu, and gae inpu Inpu Indicaor -ON indicaor Oupu-ON indicaor H3CR-AP AC (DC) inpu Zero seing deecion Time range/ uni selecors Operaing mode selecor Oscillaion Couning Oupu Inpu Indicaor -ON indicaor Oupu-ON indicaor Solid-sae Muli-funcional Timer H3CR-A B-115
8 H3CR-A8/A8S AC (DC) inpu Zero seing deecion Time range/ uni selecors Operaing mode selecor Oscillaion Couning Oupu Indicaor -ON indicaor Oupu-ON indicaor H3CR-A8E AC (DC) inpu Zero seing deecion Time range/ uni selecors Operaing mode selecor Oscillaion Couning Oupu Indicaor -ON indicaor Oupu-ON indicaor Insananeous oupu I/O Funcions Inpus (for -A/ -AS models) Rese Noe: H3CR-AP incorporaes sar inpu only. s ime-measuremen. Inerrups ime-measuremen and reses ime-measuremen value. No ime-measuremen is made and conrol oupu is OFF while he rese inpu is ON. Gae Prohibis ime-measuremen. Oupus Conrol oupu Oupus are urned ON according o designaed oupu mode when prese value is reached. B-116 Solid-sae Muli-funcional Timer H3CR-A
9 Terminal Arrangemen Noe: The delayed conac of convenional Timers was indicaed as The conac symbol of he H3CR-A is indicaed as 11-pin Models because is operaing mode is six muli-modes (four muli-modes for he H3CR-A8). 8-pin Models Timers H3CR-A/-A-300/-A-301 (Conac Oupu) H3CR-A8/-A8-301 (Conac Oupu) Rese inpu inpu Gae inpu H3CR-A8S (Transisor Oupu) H3CR-AS (Transisor Oupu) Rese inpu inpu Gae inpu Noe: Terminals 1, 3, 4, and 5 are empy. Terminals and 7 are he same as for he H3CR-A8. H3CR-A8E (Conac Oupu) Noe: Terminals 1, 3, 4, and 8 are empy. Terminals, 5, 6, 7, and 10 are he same as for he H3CR-A. H3CR-AP (Conac Oupu) inpu Noe: Terminal 5 is empy. Solid-sae Muli-funcional Timer H3CR-A B-117
10 Inpu Connecions H3CR-A/-AS The inpus of he H3CR-A/-AS are no-volage (shor- or open) inpus. No-volage Inpus No-conac Inpu Conac Inpu No-conac Inpu (Connecion o NPN open collecor oupu sensor.) 1 o 4 VDC (sensor power ) + DC power (Connecion o a volage oupu sensor.) 1 o 4 VDC (sensor power ) + DC power Sensor Timer 5 Gae 6 7 Rese Timer 5 Gae 6 7 Rese Sensor Timer Gae Rese Inpu (0 V) Inpu (0 V) Inpu (0 V) Operaes wih ransisor ON Operaes wih relay ON Operaes wih ransisor ON No-volage Inpu Signal Levels No-conac inpu Conac inpu 1. Shor- level Transisor ON Residual volage: 1 V max. Impedance when ON: 1 kω max.. Open level Transisor OFF Impedance when OFF: 100 kω min. Use conacs which can adequaely swich 0.1 ma a 5 V B-118 Solid-sae Muli-funcional Timer H3CR-A
11 H3CR-AP The sar inpu of he H3CR-AP is volage inpu. (Volage imposiion or open) Volage Inpus No-conac Inpu No-conac Inpu Conac Inpu (Connecion o PNP open (Connecion o NPN open collecor oupu sensor) collecor oupu sensor) 1 o 4 VDC (sensor power ) Sensor + 10 (+) 6 7 DC power Timer Operaes wih PNP ransisor ON Inpu 0V ( ) Sensor 1 o 4 VDC (sensor power ) + DC power 10 Operaes wih NPN ransisor ON 6 7 Timer (+) Inpu 0V ( ) AC power DC power Operaes wih relay ON Timer (+) Inpu 0V ( ) Timers Volage Inpu Signal Levels No-conac inpu Noe: The inpu is isolaed from he power. Thus, an NPN ransisor can be conneced. 1. Transisor ON Residual volage: 1 V max. The volage beween erminals 6 and 7 mus be 10.8 VDC min. Noe: Refer o he signal levels in he following able and be aware of he minimum applicable load of he relay.. Transisor OFF Leakage curren: 0.01 ma max. The volage beween erminals 6 and 7 mus be 1. VDC max. Conac inpu Use conacs ha can adequaely swich 0.1 ma a each operaing volage. The volage beween erminals 6 and 7 wih conacs ON or OFF mus saisfy he specified value. Conacs ON 100-o-40-VAC and 100-o-15-VDC models: 85 o 64 VAC or 85 o VDC 4-o-48-VAC and 1-o-48-VDC models: 0.4 o 5.8 VAC or 10.8 o 5.8 VDC Conacs OFF 100-o-40-VAC and 100-o-15-VDC models: 0 o 10 VAC or 0 o 10 VDC 4-o-48-VAC and 1-o-48-VDC models: 0 o.4 VAC or 0 o 1. VDC Solid-sae Muli-funcional Timer H3CR-A B-119
12 Operaion Timing Char Noe: 1. The minimum power-opening ime ( R ) is 0.1 s.. The minimum inpu pulse widh (for sar, rese) is 0.05 s. 3. The leer in he iming chars sands for he se ime and a means ha he period is less han he ime se. 4. sar in mode J is also possible for H3CR-A8/-A8E/-A8S/-A8-301 models. H3CR-A/-AS/-AP* *H3CR-AP model incorporaes sar inpu only. Operaing mode Timing char A: ON-delay Basic operaion B: Flicker OFF sar B: Flicker ON sar C: Signal ON/ OFFdelay Rese Oupu relay (NC) Oupu relay (NO) (Oupu indicaor) indicaor Rese Oupu relay (NC) Oupu relay (NO) (Oupu indicaor) indicaor Rese Oupu relay (NC) Oupu relay (NO) (Oupu indicaor) indicaor (see noe) Oupu Noe: inpu is invalid while he Timer is in operaion. Basic operaion (see noe) Oupu Noe: inpu is invalid while he Timer is in operaion. Basic operaion (see noe) Oupu Noe: inpu is invalid while he Timer is in operaion. Basic operaion Rese Oupu relay (NC) (see noe) Oupu Oupu relay (NO) (Oupu indicaor) indicaor Noe: inpu is valid and reriggerable while he Timer is in operaion. B-10 Solid-sae Muli-funcional Timer H3CR-A
13 Operaing mode D: Signal OFFdelay Rese Oupu relay (NC) Oupu relay (NO) (Oupu indicaor) indicaor Timing char Basic operaion (see noe) Oupu Noe: inpu is valid and re-riggerable while he Timer is in operaion. Timers E: Inerval Rese Oupu relay (NC) Basic operaion (see noe) Oupu G: Signal ON/ OFFdelay Oupu relay (NO) (Oupu indicaor) indicaor Basic operaion Noe: inpu is valid and re-riggerable while he Timer is in operaion. Rese Oupu relay (NC) (see noe) J: One-sho oupu Oupu relay (NO) (Oupu indicaor) indicaor Oupu Noe: inpu is valid and re-riggerable while he Timer is in operaion. Basic operaion Rese Oupu relay (NC) Oupu relay (NO) (Oupu indicaor) indicaor 1±0.6 s (Fixed) 1±0.6 s (Fixed) (see noe) Oupu 1±0.6 s (Fixed) Noe: inpu is valid and reriggerable while he Timer is in operaion. Gae Signal Inpu ON OFF 1 Gae Rese ON OFF ON OFF ON OFF Oupu ON relay OFF Noe: 1. This iming char indicaes he gae inpu in operaing mode A (ON-delay operaion).. The se ime is he sum of 1 and. 3. H3CR-AP model incorporaes sar inpu only. Solid-sae Muli-funcional Timer H3CR-A B-11
14 H3CR-A8/-A8S Operaing mode Timing char A: ON-delay Basic operaion Oupu relay (NC) Oupu relay (NO) (oupu indicaor) indicaor Oupu B : Flicker ON sar Oupu relay (NC) Oupu relay (NO) (oupu indicaor) indicaor Basic operaion Oupu E: Inerval Oupu relay (NC) Oupu relay (NO) (oupu indicaor) indicaor Basic operaion Oupu J: One-sho oupu Oupu relay (NC) Oupu relay (NO) (oupu indicaor) indicaor 1±0.6 s (Fixed) 1±0.6 s (Fixed) Basic operaion Oupu 1±0.6 s (Fixed) Noe: 1. The minimum power-opening ime ( R ) is 0.1 s.. The leer in he iming chars sands for he se ime and a means ha he period is less han he ime se. B-1 Solid-sae Muli-funcional Timer H3CR-A
15 H3CR-A8E Operaing mode Timing char A: ON-delay Oupu relay (NC) Oupu relay (NO) (oupu indicaor) Insananeous oupu relay (NC) Insananeous oupu relay (NO) Basic operaion Oupu Timers indicaor B : Flicker ON sar Oupu relay (NC) Oupu relay (NO) (oupu indicaor) Insananeous oupu relay (NC) Basic operaion Insananeous oupu relay (NO) Oupu indicaor E: Inerval Oupu relay (NC) Oupu relay (NO) (oupu indicaor) Insananeous oupu relay (NC) Insananeous oupu relay (NO) indicaor Basic operaion Oupu J: One-sho oupu Oupu relay (NC) Oupu relay (NO) (oupu indicaor) Insananeous oupu relay (NC) Insananeous oupu relay (NO) (Fixed) (Fixed) Basic operaion Oupu 1±0.6 s (Fixed) indicaor Noe: 1. The minimum power-opening ime ( R ) is 0.1 s.. The leer in he iming chars sands for he se ime and a means ha he period is less han he ime se. Solid-sae Muli-funcional Timer H3CR-A B-13
16 Nomenclaure Oupu indicaor (orange) (Li when oupu) indicaor (green) (Flashes when Timer operaes; li when Timer sops operaing) Operaing mode display window Operaing mode selecor Selec a mode from: A, B, B, C, D, and E (H3CR-A, -AP, and -AS) A, B, E and J (H3CR-A8, -A8S, and -A8E) G and J (H3CR-A-300) Scale range display windows Time range selecor (selec one from 1., 3, 1, and 30 a full scale; wih he H3CR-A@-301, selec from.4, 6, 4, or 60 a full scale. ) Time seing knob (se ime) Time uni display window Time uni selecor (selec one from sec, min, hrs, and 10h) B-14 Solid-sae Muli-funcional Timer H3CR-A
17 Dimensions Noe: All unis are in millimeers unless oherwise indicaed. H3CR-A H3CR-AP H3CR-AS Timers dia x pins H3CR-A8 H3CR-A8S H3CR-A8E dia x pins Dimensions wih Se Ring dia. Dimensions wih Fron Connecing Socke PCF-08-@/PCF-11-@ Time Seing Ring Panel cover Dimensions wih Back Connecing Socke P3G-08/P3GA H3CR-A H3CR-AS 100.8* H3CR-AP 98.5 PCF-11 PCF-11-E.3* H3CR-A8@ 89.9* 87.6 PCF-08 PCF-08-E.3* H3CR-A H3CR-AS H3CR-AP + Adaper H3CR-A8@ + Adaper Y9F-30 P3GA-11 Y9F-30 P3G-08 (When (When Y9A-48G Y9A-48G mouned) mouned) *These dimensions vary wih he kind of DIN rack (reference value). Solid-sae Muli-funcional Timer H3CR-A B-15
18 Applicaion Examples (H3CR-A) A Mode: ON-delay ON-delay operaion (A mode) is a basic mode. 1. -ON /-OFF Rese The -ON sar/-off rese operaion is a sandard operaing mehod. 3. Conrol of Inegraed Time wih Gae Signal Wih a gae signal, he -ON sar operaion and Signal sar operaion can be conrolled (he operaion can be inerruped). ( and 10) : se ime ( and 6) ( and 10) Rese ( and 7) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Gae ( and 5) Conrol oupu: NO (9 and 11) NO (1 and 3) Conrol oupu: NC (8 and 11) NC (1 and 4) indicaor Flashing Li Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Exernally shor-ed Flashing Li Gae signal (The operaion is inerruped wih he gae signal if he Timer deecs an abnormal signal.) Exernally shor-ed. Signal /Signal Rese The Signal sar/signal rese operaion is useful for remoe conrol of he Timer. B/B Mode: Flicker ( and 10) ( and 6) Rese ( and 7) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Li Flashing signal (remoe conrol possible) Rese signal (remoe conrol possible) Li The flicker operaion in he B and B modes can be effecively applied o lamp or buzzer (ON and OFF) alarms or he monioring of an inermien operaion wih a display. 1. -ON /-OFF Rese (in B Mode) ( and 10) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Flashing Exernally shor-ed ( coninuously supplied) B-16 Solid-sae Muli-funcional Timer H3CR-A
19 . Signal /Signal Rese (in B Mode) If here is an abnormal signal, flashing sars. When he abnormal condiion is resored, a rese signal sops he display flashing.. Signal-ON-OFF /Insananeous Operaion/Time-limi Rese ( and 10) ( and 6) Rese ( and 7) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Li Flashing Li signal Rese signal ( and 10) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Li Flashing Li Flashing Li Flashing Li signal (The operaion sars wih he signal ON or OFF) Timers ( coninuously supplied) C Mode: Signal ON/OFF-delay The Signal ON-/OFF-delay operaion (C mode) is useful for he conrol of disribuion of producs on a producion line ino boxes by he specified number or ime. 1. -ON /Insananeous Operaion/ Time-limi Rese A se of hese funcions is useful for he operaion of a machine for a specified period when power is ON. ( coninuously supplied) D Mode: Signal OFF-delay Signal OFF-delay operaion (D mode) can be effecively used o keep a load operaing for a cerain period. For example, his funcion enables he cooling fan for a lamp or heaer o operae for a cerain period afer he lamp or heaer is swiched OFF. 1. -ON /Insananeous Operaion/ Time-limi Rese ( and 10) ( and 6) ( and 10) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Li Flashing Li Exernally shor-ed signal (NC o NO) Solid-sae Muli-funcional Timer H3CR-A B-17
20 . Signal /Insananeous Operaion/ Time-limi Rese ( and 10). Signal /Insananeous Operaion/ Time-limi Rese This funcion is useful for he repeiive conrol such as he filling of liquid for a specified period afer each Signal sar inpu. ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) indicaor Li Flashing Li ( and 10) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) signal (NO o NC o NO) signal E Mode: Inerval ( coninuously supplied) ( coninuously supplied) 1. -ON /Insananeous Operaion/ Time-limi Rese This funcion is useful for he operaion of a machine for a specified period afer power is ON. ( and 10) ( and 6) Conrol oupu: NC (8 and 11) NC (1 and 4) Conrol oupu: NO (9 and 11) NO (1 and 3) Exernally shor-ed B-18 Solid-sae Muli-funcional Timer H3CR-A
21 Precauions (H3CR-A) Noe: The undermenioned is common for all H3CR-A models. Supplies For he power of an inpu device of he use an isolaing ransformer wih he primary and secondary windings muually isolaed and he secondary winding no grounded. Example: H3CR-A G, S, R 5, 6, 7 H3CR-A Inpu erminal 10 Inpu/Oupu Relaionship beween Inpu and Supply Circuis (excep for H3CR-A8E) The H3CR-A (excep for H3CR-A8E) uses ransformerless power. When connecing a relay or ransisor as an exernal signal inpu device, pay aenion o he following poins o preven shor-ing due o a sneak curren o he ransformerless power. If a relay or ransisor is conneced o wo or more Timers, he inpu erminals of hose Timers mus be wired properly so ha hey will no differ in phase, oherwise he erminals will be shor-ed o one anoher. Timers Inpu device Isolaion ransformer is required. The H3CR-A@/-A@S/AP s power erminal is a common erminal for inpu signals o he Timer. Do no disconnec he wires on erminal, oherwise he inernal ry of he Timer will be damaged. Incorrec Conac or ransisor for exernal inpu signal H3CR-A Inpu erminal Shor- curren 5, 6, 7 G, S, R Inpu erminal 10 H3CR-A Correc Inpu erminal Inpu erminal Make sure ha he volage is applied wihin he specified range, oherwise he inernal elemens of he Timer may be damaged. Inpu erminal I is impossible o provide wo independen power swiches as shown below regardless of wheher or no he Timers are differen in phase. Inpu erminal Inpu erminal Solid-sae Muli-funcional Timer H3CR-A B-19
22 Relaionship beween Inpu and Supply Circuis An appropriae inpu is applied o he inpu signal erminals of he H3CR-A@/-A@S when one of he inpu erminals is shor-ed wih he common erminal (erminal ) for he inpu signals. Never use erminal 10 as he common erminal for his purpose, oherwise he inernal of he Timer will be damaged. Incorrec 10 If a relay or ransisor is conneced o wo or more Timers, he inpu erminals of hose Timers mus be wired properly so ha hey will no be differen in phase or he erminals will be shor-ed o one anoher (refer o he figures below). Incorrec Conac or ransisor for exernal inpu signal H3CR-AP AC or DC power 5, 6, 7 G, S, R Inpu erminal H3CR-A H3CR-AP Shor- curren Correc AC or DC power 5, 6, 7 G, S, R Inpu erminal 10 H3CR-A Correc Conac or ransisor for exernal inpu signal H3CR-AP Do no connec a relay or any oher load beween inpu erminals, oherwise he inernal of he Timer will be damaged due o he high-ension volage applied o he inpu erminals Shor- curren Ry 10 7 H3CR-AP AC or DC power Inpu conac 5, 6, 7 G, S, R Inpu erminal H3CR-A Relaionship beween Inpu and Supply Circuis (H3CR-AP) Common o All H3CR-A Models Wih he H3CR-AP, inpu wires mus be as shor as possible. If he floaing capaciy of wires exceeds 1,00 pf (approx. 10 m for cables wih 10 pf/m), he operaion will be affeced. Pay paricular aenion when using shielded cables. The H3CR-A@S ransisor oupu is isolaed from he inernal ry by a phoocoupler. Therefore, eiher NPN or PNP oupu is possible. H3CR-AP AC/DC power Inpu Since he inpu and he power are configured independenly, he inpu can be urned ON or OFF irrespecive of he ON/OFF sae of he power. I mus be noed ha a volage equivalen o he power volage is applied o he inpu. B-130 Solid-sae Muli-funcional Timer H3CR-A
Solid-state Timer H3CR
Solid-sae Timer H3CR DIN 48 x 48-mm Mulifuncional Timer Series Conforms o EN61812-1 and IEC60664-1 4 kv/2 for Low Volage, and EMC Direcives. Approved by UL and CSA. Lloyds/NK approvals. Six-language insrucion
More informationH3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G H3CR-G8EL
Solid-sae Timer H3CR Please read and undersand his caalog before purchasing he producs. Please consul your OMRON represenaive if you have any quesions or commens. Refer o Warrany and Applicaion Consideraions
More informationSolid-state Multi-functional Timer
Solid-sae Muli-funcional Timer Eigh operaing modes (H3DE-M) and four operaing modes (H3DE-S) cover a wide range of applicaions. Programmable conac enables he building of a self-holding relay circui (-
More informationH3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G.
Solid-sae Timer H3CR Please read and undersand his caalog before purchasing he producs. Please consul your OMR represenaive if you have any quesions or commens. Refer o Warrany and Applicaion Consideraions
More informationSolid-state Timer. DIN 48 x 48-mm Multifunctional Timer with Many Time Ranges and Operating Modes, and Wide Power Supply Ranges
Solid-sae Timer DIN 48 x 48-mm Mulifuncional Timer wih Many Time Ranges and Operaing Modes, and Wide Supply Ranges A wider power range reduces he number of imer models kep in sock. An 11-pin or 8-pin model
More informationModel Number Structure
Solid-sae Muli-funcional Timers CSM DS_E_5_1 Muliple Operaing Modes and Muliple Time Ranges. DIN 48 x 48-mm Mulifuncional Timer wih Wide AC/DC Supply Range for Boh High and Low Volages. A wide AC/DC power
More informationModel Number Structure
Solid-sae Muli-funcional Timers CSM DS_E_6_ Muliple Operaing Modes and Muliple Time Ranges. DIN 48 x 48-mm Mulifuncional Timer wih Wide AC/DC Supply Range for Boh High and Low Volages. A wide AC/DC power
More informationSolid-state Timer H3CT
Solid-sae Timer H3CT DIN 48 x 48-mm Sandard Size Analog Timer Wide ime range (for 4 series of models); 0.1 s o 30 hrs. Wih H3CT-8H models, he oupu ype can be swiched beween ime limi DPDT and ime limi SPDT
More informationH3DS. Solid-state Multi-functional Timer. Ordering Information. DIN Track Mounted, Standard 17.5-mm Width Timer Range
Solid-sae Muli-funcional Timer DIN Track Mouned, Sandard 17.5-mm Widh Timer Range A wide AC/DC power supply range (24 o 230 VAC/ 24 o 48 VDC) reduces he number of imer models kep in sock. Eigh operaing
More informationSolid-State Timer H3CR-A. Ordering Information. 1/16 DIN Analog-Set Timer with Many Time Ranges, Operating Modes and Wide Supply Voltage Range
R Solid-Sae Timer 1/16 DIN Analog-Se Timer wih Many Time Ranges, Operaing Modes and Wide Supply Volage Range H Field-selecable ime ranges from 0.05 second o 300 hours or 0.1 second o 600 hours H Selec
More informationContents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2 for Low Voltage, and EMC Directives. Approved by UL and CSA. Lloyds/NK approvals.
More informationSolid-state Timer H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2. Conforms to EMC standards (EN50081-2 and EN50082-2). Approved by UL and CSA. Lloyds/NK
More informationModel Number Structure
Solid-sae Muli-funcional Timers DIN 48 48-mm Sae-of-he-ar Mulifuncional Timer A wider power range reduces he number of imer models kep in sock. A wide range of applicaions hrough six or four operaing modes.
More informationSensing method Application Appearance Sensing distance Model Convergent-reflective Small type 30±3 mm
Auhorised Disribuors:- AS & AAIN INDIA PV D S-, F.I.E.E., Okhla Indusrial Area, Phase-ii, New Delhi-(India) el : -9 Fax : -9 E-mail : sales@ashalain.com Compac ead Amplifier-separaed Phooelecric Sensor
More informationMonitoring Technique. VARIMETER Current relay BA 9053, MK 9053N
Monioring Technique VARIMETER Curren relay, MK 9053N 0221540 Your Advanages Prevenive mainenance For beer produciviy Quicker faul locaing Precise and reliable MK 9053N Opions wih Pluggable Terminal Blocks
More informationElectronic timer CT-MVS.12 Multifunctional with 1 c/o contact Data sheet
Feaures Raed conrol supply volage 24-48 V DC, 24-240 V AC Mulifuncion imer wih 10 iming funcions: ON-delay, OFF-delay wih auxiliary volage, Impulse-ON, Impulse-OFF wih auxiliary volage, Symmerical ON-
More informationTime Control Technique
Time Conrol Technique muliimer Mulifuncion Relay MK 785N/2 23928 Your Advanages Up o 1 funcions in one uni Simplified sorage Increased flexibiliy Quick seing of long ime values Opions wih Pluggable Terminal
More informationTime Control Technique
Time Conrol Technique MULTITIMER Mulifuncion Relay MK 785N/2 23928 Your Advanages Up o 1 funcions in one uni Simplified sorage Increased flexibiliy Quick seing of long ime values Circui Diagrams B1 22
More informationMonitoring Technique. VARIMETER Current Relay BA 9053, MK 9053N
Monioring Technique VARIMETER Curren Relay, MK 9053N 0221540 Your Advanages Prevenive mainenance For beer produciviy Quicker faul locaing Precise and reliable Circui Diagrams A1 i A2 k A1 11 12 14 22 A1
More informationDimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Indicators/operating means
OBE-R-SE Dimensions.8.8 ø..75 7.5 6. 5 6.7 4.9 4. 5.9 ø.6 Model Number OBE-R-SE Elecrical connecion emier Thru-beam sensor wih m fixed cable Feaures 45 cable oule for maximum mouning freedom under exremely
More informationPhoto-electric detectors
Phoo-elecric deecors Osiris specific applicaion deecors, mechanical handling series d.c. supply. Solid sae oupu pages /8 o / References, characerisics Compac design Sysem hru-beam Reflex Diffuse Diffuse
More informationConnection. Input II EEx ia IIC without SC red. Composition
Sandsill conroller Oupu: relay Connecion Inpu I EEx ia IIC Inpu II EEx ia IIC 1-channel Conrol circui EEx ia IIC Addiional inpu or roaion direcion deecion or sar-up override 2 relay oupus Inpu requency
More information49.8. Control Relays and Timers. Contents. Product Selection Guide. Timing Relays
Conrol Relays and Timers.8 Produc Selecion Guide Noes Applies o TRN model only. Applies o TRF model only. The E5-248 is baery powered and has hree programmable rigger funcions. This produc may perform
More informationPower Amplifier EEA-PAM-5**-A-32 for Proportional Control Valves Contents The following power amplifier models are covered in this catalog
Vickers Accessories Power Amplifier EEA-PAM-5**-A-32 for Proporional Conrol Valves Conens The following power amplifier models are covered in his caalog Power Amplifier EEA-PAM-513-A-32 EEA-PAM-523-A-32
More informationRetro-reflective photoelectric sensors with polarization filter. Dimensioned drawing
Rero-reflecive phooelecric sensors wih polarizaion filer Dimensioned drawing en 10-2011/04 50105364 1 khz 0 5m We reserve he righ o make changes DS_PRK3B_Sandard_EL_en.fm 10-30 V DC A 2 LS Polarized rero-reflecive
More informationRetro-reflective photoelectric sensors with polarization filter. Dimensioned drawing
Rero-reflecive phooelecric sensors wih polarizaion filer Dimensioned drawing en 10-2011/04 50105364 1 khz 0 5m We reserve he righ o make changes DS_PRK3B_Sandard_EL_en.fm 10-30 V DC A 2 LS Polarized rero-reflecive
More informationRetro-reflective photoelectric sensor for foils. Dimensioned drawing
Specificaions and descripion RKR 53 Rero-reflecive phooelecric sensor for foils Dimensioned drawing en 04-2012/06 50108252-01 1 khz 0 1.8m 10-30 V DC We reserve he righ o make changes DS_RKR53642_en_50108252-01.fm
More informationThe ramp is normally enabled but can be selectively disabled by suitable wiring to an external switch.
Vickers Amplifier Cards Power Amplifiers for Proporional Valves EEA-PAM-56*-A-14 Design EEA-PAM-561-A-14 for use wih valve ypes: KDG5V-5, * and KDG5V-7, 1* series EEA-PAM-568-A-14 for use wih valve ypes:
More informationTrigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing
Trigger high-speed, rero-reflecive sensors for boles Dimensioned drawing en 03-2014/10 50121192-02 10-30 V DC 0 3.6m 5 khz We reserve he righ o make changes DS_PRK18BFX_en_50121192_02.fm Trigger high-speed,
More informationDimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on
OBE-R-SE Dimensions Transmier.. 7.5 9..5.8 4.9 4 5 M 8.9 7.5 9..5.8 4 5 M 8.9 ø.6 ø.6 Model Number OBE-R-SE Thru-beam sensor wih m fixed cable Elecrical connecion Transmier Feaures BN +UB WH IN Ulra-small
More informationDimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on
OBE-R-SE Dimensions Transmier.. 7.5 9..5.8 4.9 4 5 M 8.9 7.5 9..5.8 4 5 M 8.9 ø.6 ø.6 Model Number OBE-R-SE Thru-beam sensor wih m fixed cable Elecrical connecion Transmier Feaures BN +UB WH IN Ulra-small
More informationRetro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing
Specificaions and descripion PRK 55 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Dimensioned drawing en 05-2012/11 50112987-01 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes
More informationRetro-reflective photoelectric sensors with polarization filter for bottles. Dimensioned drawing
Rero-reflecive phooelecric sensors wih polarizaion filer for boles Dimensioned drawing en 05-2013/08 50103461 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes DS_PRK3B42_en_50103461.fm Polarized
More informationMODEL: M8PP1. [4] OUTPUT PULSE WIDTH 1: Equal to the input 2: One-shot output (std. pulse width 50 ms) Specify when optional pulse width is required.
MODE: M8PP1 Dual Oupu Super-mini Signal ondiioners Pico-M Series Max. 50 kz for volage pulse inpu PUSE ISOTOR (buil-in exciaion, E) Funcions & Feaures mplifying, waveshaping a pulse rae inpu and providing
More informationUniversal microprocessor-based ON/OFF and P programmable controller MS8122A MS8122B
COMPETENCE IN MEASUREMENT Universal microprocessor-based ON/OFF and P programmable conroller MS8122A MS8122B TECHNICAL DESCRIPTION AND INSTRUCTION FOR USE PLOVDIV 2003 1 I. TECHNICAL DATA Analog inpus
More informationRetro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing
Specificaions and descripion PRK 53 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Dimensioned drawing en 04-2012/06 50112986-01 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes
More informationDISCONTINUED MODEL Replaced with Model JPS3
Plug-in Signal Condiioners M-UNIT PUSE ADDER (field-programmable) MODE MODE & SUFFIX CODE SEECTI MODE A : Dry conac B :Volage pulse (Specify sensiiviy) C : V pulse (sensiiviy V) D : V/V pulse (sensiiviy
More informationENDA ETM442 DIGITAL TIMER
english Read his documen carefully before using his device. The guaranee will be expired by damaging of he device if you don' aend o he direcions in he user manual. Also we don' accep any compensaions
More informationProgrammable DC Electronic Loads 8600 Series
Daa Shee Programmable DC Elecronic Loads The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds and
More informationMODEL: M6SXF1. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ulra-Slim Signal Condiioners M6S Series FUNCTION MODULE (PC programmable) Funcions & Feaures Mainenance-free ension clamp connecion Single inpu filer and funcion module 12 ypes of funcions
More informationInstallation / Monitoring Technique
Insallai / Mioring Technique VARIMETER Over- and Undercurren Relay IL 9277, IP 9277, SL 9277, SP 9277 02264 IL 9277 IP 9277 SL 9277 SP 9277 According o IEC/EN 60 255, DIN VDE 0435-303 IP 9277, SP 9277,
More informationSolid-state Timer H3DS
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
More informationProgrammable DC Electronic Load 8600 Series
Daa Shee Programmable DC Elecronic Load The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds and
More informationLaser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing. Teach button Optical axis Indicator diode
Specificaions and descripion Leuze elecronic Laser rero-reflecive phooelecric sensor wih polarisaion filer Dimensioned drawing Par No. 501 06860 2 khz 0 3m 10-30 V DC Polarised, laser rero-reflecive phooelecric
More informationInstallation and Operating Instructions for ROBA -brake-checker Typ
(B.018102.EN) Guidelines on he Declaraion of Conformiy A conformiy evaluaion has been carried ou for he produc in erms of he EC Low Volage Direcive 2006/95/ EC and EMC Direcive 2004/108/EC. The Declaraion
More informationSeries SHDC Output: 40A,100 Vdc and 20A,200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays
Oupu: 4A,1 Vdc and 2A,2 Vdc FEATURES/BENEFITS Laes generaion MOSFET echnology Ulra low on-sae resisance Low oupu leakage curren Buil-in overvolage proecion Reverse proeced riggered conrol inpu o avoid
More informationSolid-State Time Relays
Solid-Sae Time Relays 3RP10 and 3RP15 SIRIUS 3R Overview Solid-Sae Time Relays SIRIUS 3RP10 ime relay, assembly widh 45 mm LED o indicae ime relay energized (lef) Accessories Se of coding plugs for seing
More informationElectrical connection
Reference scanner Dimensioned drawing en 02-2014/06 50117040-01 200 500mm Disance on background/reference 10-30 V DC We reserve he righ o make changes DS_HRTR46Bref_en_50117040_01.fm Robus objec deecion
More informationContents DILET, ETR timing relay
ETR iming relay There s a cerain energy a Eaon. I s he power of uniing some of he world s mos respeced names o build a brand you can rus o mee your every power managemen need. The energy creaed suppors
More informationMulticolor contrast sensor. Dimensioned drawing
Mulicolor conras sensor Dimensioned drawing en 01-2016/06 50133231 12-30 V DC 15 khz 13mm We reserve he righ o make changes DS 2_en_50133231.fm Easy o adjus hrough display of he signal srengh on he device
More informationLaser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing
Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarisaion filer Dimensioned drawing en 08-2011/04 50105363 2 khz 0 3m 10-30 V DC Polarized rero-reflecive phooelecric
More informationMors Smitt Industrial Technology. General purpose relays
Mors Smi Indusrial Technology General purpose relays Mors Smi Indusrial Technology General purpose relays Mors Smi - Indusrial Technology Mors Smi has been manufacuring relays since 1902. Our wide relay
More information$ 12 $ 11. Terminal Block Relays (cont d) Interface PCB Relays with Socket. Why customers choose FactoryMation over competitors
92 REAY www.facorymaion.com/relays Terminal Block Relays (con d) $ 12 V D E Feaures: Changeover relay, raed load 6A/230V(ACI) lim DI-rail moun socke wih buil-in ED posiion indicaor Descripion plae Opional
More informationMODEL: M6NXF1. POWER INPUT DC Power R: 24 V DC
Screw Terminal Ulra-Slim Signal Condiioners M6N Series FUNCTION MODULE (PC programmable) Funcions & Feaures Single inpu filer and funcion module 12 ypes of funcions are PC programmable 7.5-mm wide ulra-slim
More informationLaser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing
Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarizaion filer Dimensioned drawing en 09-2012/06 50105363 2 khz 0 3m 10-30 V DC We reserve he righ o make changes DS_PRKL3B622_en_50105363.fm
More informationModel Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
More informationInstallation / monitoring technique
Insallai / mioring echnique Over- and undercurren relay varimeer IL 9277, IP 9277, SL 9277, SP 9277 Now available wih ranges up o 100 A! 02264 IL 9277 SL 9277 IP 9277 SP 9277 According o IEC/EN 60 255,
More informationON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Solid-state Timer CSM DS_E_
More informationZelio Plug-In Relays. RPM power range. Catalog
Zelio Plug-In Relays RPM power range Caalog 0 Conens Zelio Plug-In Relays bbinroducion.... bbspecificaions.................................................... 6 bbreferences... bbdimensions.... 0 bbwiring
More informationOPS Solar Inverter Specification & Manual
Solar Inverer Specificaion & Manual Conens 1 FEATURES... 2 2 TECHNICAL SPECIFICATION... 4 3 APPLICATION... 7 3.1 LED DISPLAY STATUS... 7 3.2 POWER SAVING MODE... 8 3.3 OUTPUT FREQUENCY SETTING... 8 3.4
More informationMODULAR TIME RELAYS PLUG-IN AND FLUSH-MOUNT TIME
Page -2 MOULR TM RLY uiable for consumer swichboards elecable ime ranges on fron:. second - days L indicaion Mouning on mm N rail crew erminals. Page - PLU-N N LU-MOUNT TM RLY, XMM lush and inernal panel
More informationSolid-state Timer H3DE
Solid-state Timer H3DE DIN-rail Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H) 12-VDC
More informationExplanation of Maximum Ratings and Characteristics for Thyristors
8 Explanaion of Maximum Raings and Characerisics for Thyrisors Inroducion Daa shees for s and riacs give vial informaion regarding maximum raings and characerisics of hyrisors. If he maximum raings of
More informationProgrammable DC Electronic Loads 8600 Series
Daa Shee Programmable DC Elecronic Loads 99 Washingon Sree Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visi us a www.tesequipmendepo.com 2U half-rack 3U 6U USB RS232 GPIB The programmable
More informationPROFET BTS 736 L2. Smart High-Side Power Switch Two Channels: 2 x 40mΩ Status Feedback
PROFET BTS 736 2 Smar igh-side Power Swich Two Channels: 2 x 40mΩ Saus Feedback Produc Summary Package Operaing olage bb(on) 4.75...41 Acive channels one wo parallel On-sae Resisance R ON 40mΩ 20mΩ Nominal
More informationUniversal UF3-24VDC N. Order code U F 3 24 V DC N Type of relay Model F Plug in type for socket, international 8-pole socket or 11pole socket resp.
F3-24VDC N niversal Relay niversal F Relay niversal F2/F3 Sandard ype / Twin cacs for high co nac making reliabiliy Wih LED and proeci diode reques niversal F3-24VDC N Order Code Order code F 3 24 V DC
More information3 - Zelio Time - timing relays
/0 - onens 0 - Zelio ime - iming relays Selecion guide for Zelio ime - iming relays.................... page /2 # Modular relays, solid sae oupu, widh 17.5 mm................. page /6 # Indusrial relays,
More informationCOMBITRON Program Schedule
OMBITRO Program Schedule OMBITRO are supply and acuaor modules for he elecromagne cluches and brakes. As power supply for D- or A-side swiching differen single-wave and bridge recifiers as well as rapid
More informationDATA SHEET. 1N914; 1N916 High-speed diodes DISCRETE SEMICONDUCTORS Sep 03
DISCRETE SEMICONDUCTORS DATA SHEET M3D176 Supersedes daa of April 1996 File under Discree Semiconducors, SC01 1996 Sep 03 FEATURES Hermeically sealed leaded glass SOD27 (DO-35) package High swiching speed:
More information700 FS H 3 U U FS A 3 A U23
Bullein -F Produc Overview/Produc elecion Bullein -F High Performance Timing Relay Adjusable funcion and iming range iming relays DIN Rail mouned wihou cos of socke. mm wide muli-funcion or single funcions
More informationElectronic step-on step-off relays SR-2
Elecronic sep-on sep-off relays - 7 7 7-0min z A 0Va / WI MADE BY COMAT 0 z A 0Va -K / WI MADE BY COMAT 0 Elecronic sep-on sep-off relays ype - wih he following characerisics: Plug in sep-on sep-off relay
More informationControl circuit for a Self-Oscillating Power Supply (SOPS) TDA8385
FEATURES Bandgap reference generaor Slow-sar circuiry Low-loss peak curren sensing Over-volage proecion Hyseresis conrolled sand-by funcion Error amplifier wih gain seing Programmable ransfer characer
More informationTime - timing relays 3
Selecion guide Zelio ime - iming relays Applicaions Oupu hese iming relays enable simple auomaion cycles o be se up using wired logic. hey can also be used o complemen he funcions of PLs. Solid sae iming
More informationDisribued by: www.jameco.com 1-800-831-4242 The conen and copyrighs of he aached maerial are he propery of is owner. 16K-Bi CMOS PARALLEL E 2 PROM FEATURES Fas Read Access Times: 200 ns Low Power CMOS
More informationGeneral Introduction. These modules present a number of practical advantages to the user.
General Inroducion In measuremen, posiioning and conrol applicaions, i is necessary o monior and indicae he saus of he machine or insallaion. In order for he signal o be processed by he programmable conroller,
More informationMCR-S-...-DCI. Current transducer up to 55 A, programmable and configurable. Data sheet _en_11. 1 Description
Curren ransducer up o 55 A, programmable and configurable Daa shee 100241_en_11 PHOENIX CONTACT 2012-06-07 1 Descripion The MCR-S-...-DCI curren ransducers offer users he opion of ordering a preconfigured
More informationECMA st Edition / June Near Field Communication Wired Interface (NFC-WI)
ECMA-373 1 s Ediion / June 2006 Near Field Communicaion Wired Inerface (NFC-WI) Sandard ECMA-373 1 s Ediion / June 2006 Near Field Communicaion Wired Inerface (NFC-WI) Ecma Inernaional Rue du Rhône 114
More informationElectric amplifiers. Table of contents. Features. RE 30095/04.11 Replaces: Types VT 5005 to VT Component series 1X 1/8
Elecric amplifiers RE 30095/04. Replaces: 05.0 /8 Types VT 5005 o VT 5008 Componen series X 558_d Table of conens Conens Page eaures Ordering code uncional descripion Block diagram / pinou: VT 5005 and
More informationSynchronization of single-channel stepper motor drivers reduces noise and interference
hronizaion of single-channel sepper moor drivers reduces noise and inerference n mos applicaions, a non-synchronized operaion causes no problems. However, in some cases he swiching of he wo channels inerfere,
More informationApplication & Guidance Notes
Phooelecric Swiches Applicaions Successful applicaion of phoo-elecrics ino sysems need no involve a deep undersanding of heir principles of operaion. Following hese few simple rules will enable many of
More informationSolid-state Twin Timer
Solid-state Twin Timer -F Operates in flicker- or flicker- start mode with one Unit. Independent - and -time settings. Combinations of long - or -time and short - or -time setting are possible. Long time
More informationValve amplifiers for proportional pressure valves
Valve amplifiers for proporional pressure valves Type VT-VSPA-, VT-VSPAK- RE 30 Ediion: 03- Replaces: 0.0 Componen series X Suiable for he conrol of all direc and pilo operaed proporional pressure valves
More informationPERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, RECEIVING TYPE 8233
INCH-POUND MIL-PRF-1/1593E 15 Augus 2012 SUPERSEDING MIL-PRF-1/1593D 17 Augus 2004 DESCRIPTION: Penode, sharp cuoff. Ouline: See figure 1. PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, RECEIVING TYPE
More informationPI90LV9637. LVDS High-Speed Differential Line Receivers. Features. Description. Applications PI90LV9637
LVDS High-Speed Differenial Line Receivers Feaures Signaling Raes >400Mbps (200 MHz) Single 3.3V Power Supply Design Acceps ±350mV (ypical) Differenial Swing Maximum Differenial Skew of 0.35ns Maximum
More informationSelection guide Zelio Time - timing relays 0
Selecion guide Zelio ime - iming relays 0 Applicaions Oupu hese iming relays enable simple auomaion cycles o be se up using wired logic. hey can also be used o complemen he funcions of PLs. Solid sae iming
More informationORDER INFORMATION TO pin 320 ~ 340mV AMC7150DLF
www.addmek.com DESCRIPTI is a PWM power ED driver IC. The driving curren from few milliamps up o 1.5A. I allows high brighness power ED operaing a high efficiency from 4Vdc o 40Vdc. Up o 200KHz exernal
More informationDiodes. Diodes, Page 1
Diodes, Page 1 Diodes V-I Characerisics signal diode Measure he volage-curren characerisic of a sandard signal diode, he 1N914, using he circui shown below. The purpose of he back-o-back power supplies
More informationIntelligent Interface Modules
General Inroducion In measuremen, posiioning and conrol applicaions, i is necessary o monior and indicae he saus of he machine or insallaion. In order for he signal o be processed by he programmable conroller,
More informationOMRON. H3DE - Standard Timer. H3DE-G - Star-Delta Timer. H3DE-F - Twin Timer. H3DE-H - Power OFF- Delay Timer
OMRON Analog Set Multifunction Timers Series To view data sheets, click on any link below: - Standard Timer -G - Star-Delta Timer -F - Twin Timer -H - Power OFF- Delay Timer Multifunction Timer Analog
More informationGeneral data 8/91. Overview
SIRIUS 3RS0, 3RS, 3RS0, 3RS Temperaure Monioring Relays General daa Overview Temperaure seing LED "Device on volage" LED "Relay swiched" Hyseresis swich NSB0_04a LED for display "Up and Down" keys Roary
More informationACTIVE INTERFACE TECHNOLOGY
General Inroducion In measuremen, posiioning and conrol applicaions, i is necessary o monior and indicae he saus of he machine or insallaion. In order for he signal o be processed by he programmable conroller,
More informationSCiCoreDrive62 +DC T5 U V W -DC. SCiCore 62. IGBT/MOSFET drivers
PRELIMINARY TECHNICAL INFORMATION SCiCoreDrive62 IGBT/MOSFET drivers HIGHLIGHTS - 6 channel IGBT driver - suiable for 200V IGBT (900 V max on DCLink) - Up o 8 A peak oupu curren - Collecor sensing & faul
More informationApplication Note 5324
Desauraion Faul Deecion Opocoupler Gae Drive Producs wih Feaure: PLJ, PL0J, PLJ, PL1J and HCPLJ Applicaion Noe 1. Inroducion A desauraion faul deecion circui provides proecion for power semiconducor swiches
More informationGTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a
GTZ 25 / 40 / 55 THEE-PHASE SOLID STATE ELAYS WITH LOGIC CONTOL Main applicaions Thermoforming Plasic exrusion lines Indusrial ovens and furnaces Hea reamens Conrol applicaions wih high swiching speed
More informationCURRENT MODE PWM+PFM CONTROLLER WITH BUILT-IN HIGH VOLTAGE MOSFET
CURRENT MODE PWM+PFM CONTROLLER WITH BUILT-IN HIGH VOLTAGE MOSFET DESCRIPTION SD6835 is curren mode PWM+PFM conroller used for SMPS wih buil-in high-volage MOSFET and exernal sense resisor. I feaures low
More informationThree phase full Bridge with Trench MOSFETs in DCB-isolated high-current package
MTI145WX1GD Three phase full Bridge wih Trench MOSFETs in DCB-isolaed high-curren package S = 1 V 5 = 19 R DSon yp. = 1.7 mw Par number MTI145WX1GD L1+ L+ L3+ G1 G3 G5 Surface Moun Device S1 S3 S5 L1 L
More informationDigital Tachometer Digital Tachometer/ Elapsed timecounter/ Time width meter/ Flowmeter
98211B Digial Tachomeer Digial Tachomeer/ Elapsed imecouner/ Time widh meer/ Flowmeer Sandard inpu series Diferenial inpu series DT-501X/DT-501F Insrucion Manual Safey Requiremens Be sure o observe Before
More informationA1 K. 12V rms. 230V rms. 2 Full Wave Rectifier. Fig. 2.1: FWR with Transformer. Fig. 2.2: Transformer. Aim: To Design and setup a full wave rectifier.
2 Full Wave Recifier Aim: To Design and seup a full wave recifier. Componens Required: Diode(1N4001)(4),Resisor 10k,Capacior 56uF,Breadboard,Power Supplies and CRO and ransformer 230V-12V RMS. + A1 K B1
More information4 20mA Interface-IC AM462 for industrial µ-processor applications
Because of he grea number of indusrial buses now available he majoriy of indusrial measuremen echnology applicaions sill calls for he sandard analog curren nework. The reason for his lies in he fac ha
More information