Ordering number : ENA16D SMP P-Channel Power MOSFET V, 1A, 8.mΩ, TO-6-L/TO-6 http://onsemi.com Features ON-resistance RDS(on)1=6.mΩ (typ.) Input capacitance Ciss=14pF (typ.) 4V drive TO-6 Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit Drain to Source Voltage VDSS -- V Gate to Source Voltage VGSS ± V Drain Current (DC) ID --1 A Drain Current (Pulse) IDP PW 1μs, duty cycle 1% --4 A Allowable Power Dissipation PD Tc= C 9 W Channel Temperature Tch 1 C Storage Temperature Tstg -- to +1 C Avalanche Energy (Single Pulse) *1 EAS 468 mj Avalanche Current * IAV --6 A Note : *1 VDD= -48V, L=1μH, IAV= -6A (Fig.1) * L 1μH, Single pulse Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta= C Parameter Symbol Conditions Ratings min typ max Unit Drain to Source Breakdown Voltage V(BR)DSS ID=--1mA, VGS=V -- V Zero-Gate Voltage Drain Current IDSS VDS=--V, VGS=V --1 μa Gate to Source Leakage Current IGSS VGS=±16V, VDS=V ±1 μa Cutoff Voltage VGS(off) VDS=--1V, ID=--1mA --1. --.6 V Forward Transfer Admittance yfs VDS=--1V, ID=--A 14 S Static Drain to Source On-State Resistance RDS(on)1 ID=--A, VGS=--1V 6. 8. mω RDS(on) ID=--A, VGS=--4V 8. 11 mω Input Capacitance Ciss 14 pf Output Capacitance Coss VDS=--V, f=1mhz 1 pf Reverse Transfer Capacitance Crss 4 pf Turn-ON Delay Time td(on) 9 ns Rise Time tr 1 ns See Fig. Turn-OFF Delay Time td(off) 8 ns Fall Time tf 8 ns Total Gate Charge Qg 8 nc Gate to Source Charge Qgs VDS=--48V, VGS=--1V, ID=--1A nc Gate to Drain Miller Charge Qgd nc Diode Forward Voltage VSD IS=--1A, VGS=V --1. --1. V Reverse Recovery Time trr See Fig. 1 ns Reverse Recovery Charge Qrr IS=--1A, VGS=V, di/dt=--1a/μs 8 nc ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data sheet. Semiconductor Components Industries, LLC, 1 September, 1 9111 TKIM TC-966/O41 TKIM/1 TKIM TC-/ No. A16-1/6 O111 TKIM TC-64/11QA TKIM TC-
SMP -- --18 --16 Tc= C ID -- VDS --8V --1V --6V --4V -- --18 --16 VDS= --1V ID -- VGS Tc= -- C C C --14 --1 --1 --8 --6 --4 -- VGS= --V --14 --1 --1 --8 --6 --4 -- C Tc= C Static Drain to Source On-State Resistance, R DS (on) -- mω 18 16 14 1 1 8 6 4 --. --.4 --.6 --.8 --1. --1. --1.4 --1.6 --1.8 --. Drain to Source Voltage, V DS -- V IT16499 RDS(on) -- VGS I D = --A Single pulse Tc= C C -- C Static Drain to Source On-State Resistance, R DS (on) -- mω 18 16 14 1 1 8 6 4 -- C --. --1. --1. --. --. --. --. --4. --4. --. Gate to Source Voltage, V GS -- V IT16 RDS(on) -- Tc Single pulse VGS = --4V, I D = --A V GS = --1V, ID = --A Forward Transfer Admittance, yfs -- S Switching Time, SW Time -- ns --1 -- -- --4 -- --6 -- --8 --9 --1 Gate to Source Voltage, V GS -- V IT161 yfs -- ID 1 V DS = --1V 1 1 1. Tc= -- C C C.1 --.1 --1. --1 --1 IT16 SW Time -- ID V DD = --48V V GS = --1V 1 1 td(off) t f tr t d (on) --.1 --1. --1 --1 IT1419 Source Current, I S -- A Ciss, Coss, Crss -- pf -- -- 1 1 1 Case Temperature, Tc -- C IT16 IS -- VSD --1 V GS =V Single pulse --1 --1 --1. --.1 --.1 1 1 1 Tc= C C -- C --. --.4 --.6 --.8 --1. --1. --1.4 Diode Forward Voltage, V SD -- V IT1198 Ciss, Coss, Crss -- VDS f=1mhz Ciss Coss Crss 1 -- --1 --1 -- -- -- Drain to Source Voltage, V DS -- V IT16 No. A16-/6
SMP Gate to Source Voltage, V GS -- V VGS -- Qg --1 VDS = --48V --9 I D = --1A --8 -- --6 -- --4 -- -- --1 1 1 1 Total Gate Charge, Qg -- nc PD -- Tc IT166 --1 I DP = --4A(PW 1μs) I D = --1A --1 --1 1 Operation in this area is limited by R DS (on). A S O 1ms 1ms 1ms DC operation 1μs 1μs --1. Tc= C --.1 Single pulse --.1 --1. --1 --1 IT16 Drain to Source Voltage, V DS -- V EAS -- Ta Allowable Power Dissipation, P D -- W 9 8 6 4 1 Avalanche Energy derating factor -- % 1 8 6 4 4 6 8 1 1 14 16 Case Temperature, Tc -- C IT161 1 1 1 1 Ambient Temperature, Ta -- C IT14184 No. A16-/6
SMP Package Dimensions SMP-DL-1E DPAK/TO-6-L CASE 418AP ISSUE O Unit : mm 1: Gate : Drain : Source 4: Drain Land Pattern Example Packing Type: DL Electrical Connection, 4 DL 1 No. A16-4/6
SMP Package Dimensions SMP-TL-1E Unit : mm 1: Gate : Drain : Source 4: Drain Land Pattern Example Packing Type: TL Electrical Connection, 4 TL 1 No. A16-/6
SMP Ordering & Package Information Device Package Shipping memo SMP-DL-1E SMP-TL-1E TO-6-L SC-8, TO-6 TO-6 8 pcs./reel Pb-Free Marking MP LOT No. Fig.1 Unclamped Inductive Switching Test Circuit Fig. Switching Time Test Circuit V --1V Ω Ω RG G D S L SMP VDD V --1V VIN PW=1μs D.C. 1% VIN G VDD= --48V D ID= --A RL=.96Ω VOUT Fig. Reverse Recovery Time Test Circuit P.G Ω S SMP SMP D G L S VDD Driver MOSFET Note on usage : Since the SMP is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A16-6/6