MBRS24LT3G, NRVBS24LT3G Surface Mount Schottky Power Rectifier Power Surface Mount Package These devices employ the Schottky Barrier principle in a metal to silicon power rectifier. Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. Features Compact Package with J Bend Leads Ideal for utomated Handling Highly Stable Oxide Passivated Junction Guard Ring for Overvoltage Protection Low Forward Voltage Drop ESD Ratings: Human Body Model = 3B (> 16 V) Machine Model = C (> 4 V) NRVB Prefix for utomotive and Other pplications Requiring Unique Site and Control Change Requirements; EC Q11 Qualified and PPP Capable ll Packages are Pb Free* Mechanical Characteristics Case: Molded Epoxy Epoxy Meets UL 94 V @.125 in Weight: 95 mg (pproximately) Cathode Polarity Band Maximum Temperature of 26 C/1 Seconds for Soldering Finish: ll External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable SCHOTTKY BRRIER RECTIFIER 2. MPERES, 4 VOLTS 2BL4 Y WW CSE 43 ORDERING INFORMTION Device Package Shipping MBRS24LT3G MRKING DIGRM YWW 2BL4 = Specific Device Code = ssembly Location = Year = Work Week = Pb Free Package (Note: Microdot may be in either location) (Pb Free) 2,5 / Tape & Reel NRVBS24LT3G (Pb Free) 2,5 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD811/D. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 213 pril, 213 Rev. 7 1 Publication Order Number: MBRS24LT3/D
MBRS24LT3G, NRVBS24LT3G MXIMUM RTINGS Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage verage Rectified Forward Current (t Rated V R, T C = 1 C) Rating Symbol Value Unit V RRM V RWM V R I O 2. 4 V Peak Repetitive Forward Current (t Rated V R, Square Wave, 2 khz, T C = 15 C) Non Repetitive Peak Surge Current (Surge pplied at Rated Load Conditions Halfwave, Single Phase, 6 Hz) I FRM 4. I FSM 25 Storage Temperature T stg, T C 55 to +15 C Operating Junction Temperature T J 55 to +15 C Voltage Rate of Change (Rated V R, T J = ) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. dv/dt 1, V/ s THERML CHRCTERISTICS Thermal Resistance, Junction to Lead (Note 1) Thermal Resistance, Junction to mbient (Note 2) 1. Mounted with minimum recommended pad size, PC Board FR4. 2. 1 inch square pad size (1 x.5 inch for each lead) on FR4 board. Characteristic Symbol Value Unit R JL 18 R J 78 C/W ELECTRICL CHRCTERISTICS Maximum Instantaneous Forward Voltage (Note 3) see Figure 2 (I F = 2. ) (I F = 4. ) Maximum Instantaneous Reverse Current (Note 3) see Figure 4 (V R = 4 V) (V R = 2 V) 3. Pulse Test: Pulse Width 25 s, Duty Cycle 2.%. Characteristic Symbol Value Unit V F T J = V.43.54.375.55 I R T J = T J = 1 C m 2..5 6 4 2
I MBRS24LT3G, NRVBS24LT3G TYPICL CHRCTERISTICS i F, INSTNTNEOUS FORWRD CURRENT (MPS) I 1 1.1 i F, INSTNTNEOUS FORWRD CURRENT (MPS) 1 1 85 C - 4 C 85 C -4 C.1.1.2.3.4.5.6.7.8.1.2.3.4.5.6.7.8 V F, INSTNTNEOUS FORWRD VOLTGE (VOLTS) V F, MXIMUM INSTNTNEOUS FORWRD VOLTGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage, REVERSE CURRENT (MPS) R 1E-3 1E-3 1.E-3 1E-6 1E-6 85 C 1 2 3 4, MXIMUM REVERSE CURRENT (MPS) R 1E-3 1E-3 1.E-3 1E-6 1E-6 1 C 1 2 3 4 V R, REVERSE VOLTGE (VOLTS) V R, REVERSE VOLTGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current 3
MBRS24LT3G, NRVBS24LT3G TYPICL CHRCTERISTICS I O, VERGE FORWRD CURRENT (MPS) 3.5 3. 2.5 2. 1.5 1..5 dc SQURE WVE 1 11 12 13 T L, LED TEMPERTURE ( C) Freq = 2 khz R JL = 18 C/W P FO, VERGE POWER DISSIPTION (WTTS) 1.6 1.4 1.2 1..8.6.4.2 Ipk/Io = 1 Ipk/Io = 2 Ipk/Io = Ipk/Io = 5. 14 15.5 1. 1.5 2. SQURE WVE 2.5 3. I O, VERGE FORWRD CURRENT (MPS) dc 3.5 Figure 5. Current Derating Figure 6. Forward Power Dissipation 1 T J = 1 C, CPCITNCE (pf) 1 1 SURGE CURRENT (MPS) 1 1. 1 5. 1 15 2 25 3 35 4 1. 1 1 1 V R, REVERSE VOLTGE (VOLTS) PULSE WIDTH ( SEC) Figure 7. Capacitance Figure 8. Maximum Non Repetitive Forward Surge Current 1 R T, TRNSIENT THERML RESISTNCE (NORMLIZED) 1.E+ 1.E-1 1.E-2 1.E-3 5% 2% 1% 5.% 2.% 1.% 1.E-4.1 R tjl(t) = R tjl*r(t).1.1.1.1 1. 1 1 1 t, TIME (s) Figure 9. Thermal Response 4
MBRS24LT3G, NRVBS24LT3G PCKGE DIMENSIONS CSE 43 3 ISSUE H H E E b POLRITY INDICTOR OPTIONL S NEEDED D NOTES: 1. DIMENSIONING ND TOLERNCING PER NSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHLL BE MESURED WITHIN DIMENSION P. MILLIMETERS INCHES DIM MIN NOM MX MIN NOM MX 1.9 2.2 2.28.75.87.9 1.5.1.19.2.4.7 b 1.96 2.3 2.2.77.8.87 c.15.23.31.6.9.12 D 3.3 3.56 3.95.13.14.156 E 4.6 4.32 4.6.16.17.181 H E 5.21 5.44 5.6.25.214.22 L.76 1.2 1.6.3.4.63 L1.51 REF.2 REF L L1 c 1 SOLDERING FOOTPRINT* 2.261.89 2.743.18 2.159.85 SCLE 8:1 mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. ll operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/ffirmative ction Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICTION ORDERING INFORMTION LITERTURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 8217 US Phone: 33 675 2175 or 8 344 386 Toll Free US/Canada Fax: 33 675 2176 or 8 344 3867 Toll Free US/Canada Email: orderlit@onsemi.com N. merican Technical Support: 8 282 9855 Toll Free US/Canada Europe, Middle East and frica Technical Support: Phone: 421 33 79 291 Japan Customer Focus Center Phone: 81 3 5817 15 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBRS24LT3/D