Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE Techline Yoke Clamps* 100 Clamps Per Bag # OF TUBES CATALOG # 1/4Ó O.D. 1 or 2 TLY4-2 1/4Ó O.D. 2 or 4 TLY4-3 3/8Ó O.D. 1 or 2 TLY6-2 3/8Ó O.D. 2 or 4 TLY6-3 1/2Ó O.D. 1 or 2 TLY8-2 1/2Ó O.D. 2 or 4 TLY8-3 3/4Ó O.D. 1 or 2 TLY12-2 Any Size Tube To Fit 4Ó Channel - TLY 4-10 Any Size Tube To Fit 6Ó Channel - TLY 8-12 *Yoke Clamps Are Available To Fit Any Width. Techline Gang Clamps* 25 Clamps Per Bag #OF TUBES CATALOG # 2 - TLG**2 SSB 3 - TLG**3 SSB 4 - TLG**4 SSB 5 - TLG**5 SSB 6 - TLG**6 SSB 7 - TLG**7 SSB 8 - TLG**8 SSB 9 - TLG**9 SSB 10 - TLG**10 SSB 11 - TLG**11 SSB Notes: 12 1 - TLG**12 SSB 1 N/A in 1/2Ó 1 * All Clamps Are.316 SS ** Please Specify Size Code - 4 for 1/4Ó, 6 for 3/8, 8 for 1/2Ó Gang Clamps Over 12 Tube Size Are Available Upon Request 9
TECHLINE Techline Bundle Clamps CABLE SIZE PART NUMBER 1.24Ó or less TLBC 0.0-1.2 1.25Ó - 2.00Ó TLBC 1.2-2.0 2.00Ó - 3.00Ó TLBC 2.0-3.0 3.00Ó - 4.00Ó TLBC 3.0-4.0 4.00Ó - 5.00Ó TLBC 4.0-5.0 5.00Ó - 6.00Ó TLBC 5.0-6.0 Techline Single Clamps 50 Clamps Per Bag TUBE SIZE PART NUMBER 1/4Ó O.D. TLG 4-1 3/8Ó O.D. TLG 6-1 1/2Ó O.D. TLG 8-1 5/8Ó O.D. TLG 10-1 3/4Ó O.D. TLG 12-1 1Ò O.D. TLG 16-1 Techline Duplex Clamps 50 Clamps Per Bag TUBE SIZE PART NUMBER 1/4Ó O.D. TLD 4-2 3/8Ó O.D. TLD 6-2 1/2Ó O.D. TLD 8-2 3/4Ó O.D. TLD 12-2 1Ò O.D. TLD 16-2 10
TECH MOUNT Mounting Hardware 17
CONDUIT STRUT CLAMPS Easy Installation Fits Both EMT and Rigid Conduit Nut and Bolt Included Zinc Plated Standard 304SS Available Upon Request PART NO. EMT/RIGID DESIGN LOAD STD. PKG. TSCC50ZP 1/2Ó 400# 100 TSCC75ZP 3/4Ó 400# 100 TSCC100ZP 1Ó 400# 100 TSCC125ZP 1 1/4Ó 600# 100 TSCC150ZP 1 1/2Ó 600# 50 TSCC200ZP 2Ó 600# 50 TSCC250ZP 2 1/2Ó 800# 50 TSCC300ZP 3Ó 800# 50 TSCC350ZP 3 1/2Ó 1000# 50 TSCC400ZP 4Ó 1000# 25 Note: Part Numbers Shown are Zinc Plated, for 304SS add (SS) Suffix to the Part Number Example: TSCC50SS TECHSTRUT TUBING STRUT CLAMPS Easy Installation Fits O.D. Tubing Nut and Bolt Included Zinc Plated Standard 304SS Available Upon Request PART NO. TUBING DESIGN LOAD STD. PKG. TSTC25ZP 1/4Ó 400# 100 TSTC38ZP 3/8Ó 400# 100 TSTC50ZP 1/2Ó 400# 100 TSTC63ZP 5/8Ó 400# 50 TSTC75ZP 3/4Ó 400# 50 TSTC100ZP 1Ó 600# 50 TSTC125ZP 1 1/4Ó 600# 25 TSTC138ZP 1 3/8Ó 600# 25 TSTC150ZP 1 1/2Ó 600# 25 TSTC175ZP 1 3/4Ó 800# 25 TSTC200ZP 2Ó 800# 25 TSTC250ZP 2 1/2Ó 800# 25 Standard Material Width is 1 3/8Ó 1/4Ó - 4/3Ó Sizes Use 16 GA 1Ó - 1 1/2Ó Sizes Use 14 GA 1 3/4Ó - 3 1/2Ó Sizes Use 12 GA 4Ó Sizes Use 11 GA TSTC300ZP 3Ó 800# 1 TSTC350ZP 3 1/2Ó 800# 1 TSTC400ZP 4Ó 1000# 1 Note: Part Numbers Shown are Zinc Plated, for 304SS add (SS) Suffix to the Part Number Example: TSTC25SS 37
CUSH-A-CLAMP CUSH-A-CLAMP channel mounted clamping systems are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. THE CLAMP - Features a unique shoulder stud which is securely fastened to one clamp half. This ÒControlled-SqueezeªÓ design eliminates overtightening and rotation while a nylon-insert nut assures a positive lock. Clamps are available in steel (with electrodichromate finish), and stainless steel. Fits any standard 1 5/8Ó wide channel. THE CUSHION - Manufactured from a thermoplastic elastomer, itõs built tough to withstand the effects of most oils, chemicals and industrial cleaning compounds, in temperatures from -50¼ to 275¼F. A patented ÒLiving HingeÓ allows the cushion to be spread apart for quick, easy installation. Interlock edges and channel locator legs insure that the cushion remains in place. WIDE SIZE RANGE -Available in tube sizes from 1/4Ó to 6 1/8Ó, pipe sizes from 1/4Ó to 6Ó. Special sizes available, call factory. INSTALLATION -One man, one tool time savings. Retrofits can be added without disassembling your present system. TUBE SERIES PIPE SERIES ASSEMBLY *COPPER & STEEL COPPER WATER ASSEMBLY NOMINAL PART NO. TUBING PIPE (NOM.) PART NO. PIPE SIZE DIM ÒAÓ DIM ÒBÓ DIM ÒCÓ DIM ÒDÓ 004T008 1/4Ó.25.62.27.98 006T010 3/8Ó 1/4Ó.37.82.33 1.13 008T012 1/2Ó 3/8Ó.50.94.40 1.34 009N012 1/4Ó.54.98.43 1.34 010T014 5/8Ó 1/2Ó.62 1.06.46 1.54 011N014 3/8Ó.67 1.13.49 1.54 012T016 3/4Ó 5/8Ó.75 1.20.52 1.68 014N018 1/2Ó.84 1.29.58 1.82 014T018 7/8Ó 3/4Ó.87 1.31.58 1.82 016T020 1Ó 1.00 1.44.65 1.95 017N022 3/4Ó 1.05 1.57.70 2.08 018T022 1 1/8Ó 1Ó 1 1.57.70 2.08 020T024 1 1/4Ó 1.25 1.70.77 2.21 021N026 1Ó 1.31 1.76.81 2.34 022T026 1 3/8 1 1/4 1.37 1.82.83 2.34 024N028 1 1/2Ó 1.50 1.95.90 2.47 026N030 1 5/8Ó 1 1/2Ó 1.62 2.07.96 2.60 027N032 1 1/4Ó 1.66 2.17.99 2.73 028N032 1 3/4Ó 1.75 2.20 1.02 2.73 030N034 1 7/8Ó 1.87 2.32 1.09 2.86 030N034 1 1/2Ó 1.90 2.35 1.09 2.86 032N036 2Ó 2.00 2.45 1.15 3.04 034N040 2 1/8Ó 2Ó 2 2.57 1.27 3.23 038N044 2 3/8Ó 038N044 2Ó 2.37 2.82 1.41 3.67 040N046 2 1/2Ó 2.50 2.94 1.46 3.79 0420N048 2 5/8 2 12Ó 2.62 3.07 1.53 3.92 046N052 2 7/8 046N052 2 1/2Ó 2.87 3.32 1.66 4.17 050N054 3Ó 3.00 3.57 1.78 4.42 050N056 3 1/8Ó 3 3 3.57 1.78 4.42 053N060 3 5/16Ó 3.31 3.96 1.90 4.75 056N062 3 1/2Ó 056N062 3Ó 3.50 3.95 1.97 4.79 058N064 3 5/8Ó 3 1/2 3.62 4.20 2.03 4.11 064N072 4Ó 064N072 3 1/2Ó 4.00 4.45 2.28 5.42 066N074 4 1/8Ó 4 4 4.57 2.34 5.54 069N076 4 5/16Ó 4.34 4.96 2.40 5.84 072N080 4 1/2Ó 072N080 4Ó 4.50 4.95 2.53 5.92 082N090 5 1/8 5 5 5.57 2.84 6.54 089N096 5Ó 5.56 6.01 3.06 6.92 098N106 6 1/8 6 6 6.57 3.34 7.54 106N114 6Ó 6.62 7.07 3.59 8.23 A patented ÒLiving HingeÓ allows the cushion to be spread apart for quick, easy installation on sizes from 1/4Ó throug 5/8Ó. Ordering CUSH-A- CLAMP assemblies is fast and easy. Refer to the installation chart, select your specific application, then order the appropriate assembly part number. All pipe series and tube series above 1 3/8Ó are furnished without the controlled-squeeze shoulder bolt. These series feature a threaded stud securely fastened to one clamp half. CUSH-A-CLAMP assemblies are available individually packaged in sizes up to and including 2 1/8Ó, upon request. When ordering stainless, substitute ÒNSÓ for ÒTÓ or ÒNÓ. * Tube O.D. is Cushion I.D. All parts are marked for easy identification and packaged for small lot or bulk use. Part Numbers are ÒcodedÓ to designated Tube or Pipe series, cushion size and clamp size. Example: Tube Series: 004 (Cushion Size 1/4Ó T (Tubing Assembly) 008 (Clamp Size 1/2Ó) Pipe Series: 009 (Cushion Size 1/4PÓ N (Pipe Assembly) 012 (Clamp Size 3/4Ó)
STANDARD DUTY CLAMPS Ð ARRANGEMENTS Arrangement A1 Single Clamp Stacking Kit Arrangement A Single Clamp with Weld Plate Arrangement D Single Clamp Stacking Module (not available for size 0) (Order weld plate separately) Note: 3 max. stacking modules recommended. Arrangement A1TM Single Clamp for C-Rail Mounting (Order C-Rail separately) Parts Legend 1. Hex Head Bolt 5. Clamp Pair 2. Top Plate 6. Stacking Bolt 3. Weld Plate 7. Insert 4. Safety Plate 8. C-Rail Nut Arrangement B Single Clamp without Top Plate OTHER SIZES AND ACCESSORIES AVAILABLE Please consult factory for full catalog or visit our web site at www.techline mfg.com Model Code: Series Size 0 to 6 (refer to Table A) HRL 1 A 10 PP UNC Thread Type Clamp Material PP - Polypropylene PA - Polyamide AL - Aluminum (not avail. for size 0) Arrangement A - Single clamp with weld plate B - Single clamp without top plate D - Single clamp stacking module (not avail. for size 0) A1 - Single clamp stacking kit A1TM - C-rail mounted clamp Bore Size (refer to Table A) FOR 304 SS HARDWARE ADD A4 TO END OF MODEL CODE 44
STANDARD DUTY CLAMPS Ð DIMENSIONS a Table A 3 Size 0.39 (10).37 (9.5) A - Arrangement a 1 Sizes 1-6 A - Arrangement C-Rail and C-Rail Nut Dimensions Note: Dimensions shown in inches (millimeters). Recommended Bore Size Nominal Size a 1 h 2 h 3 Bolt Size Weight Tube Pipe in in in in in in Sizes lbs (kg) Size in mm O.D. Size (mm) (mm) (mm) (mm) (mm) (mm) Arrangement (in) A B.25 6.4 1/4" -.31 8.0 5/16" - 0.37 9.5 3/8" - N/A 1.10 A 1/4-20 x 1-1/4.39 10.0-1/8" (28) B 1/4-20 x 1.63 1.26 1.14.25 6.4 1/4" - (16) (32) (29).31 8.0 5/16" - A 1/4-20 x 1-1/4.47 12.0 - - 1.37 9.5 3/8" -.79 1.42 1.34.39 10.0-1/8" (20) (36) (34) B 1/4-20 x 1.47 12.0 - -.14 (.06) (.05).18.13 (.08) (.06).50 12.7 1/2" - 2.55 14.0 - - 1.02 1.65 1.57.77 1.53 1.42 A 1/4-20 x 1-1/2.27.16.63 16.0 5/8" - (26) (42) (40) (19.5) (39) (36) () (.07).67 17.1-3/8" B 1/4-20 x 1-1/4.75 19.0 3/4" - 3.84 21.3-1/2" 1.30 1.97 1.89.85 1.69 1.57 A & B 1/4-20 x 1-1/2.31.22.87 22.0 - - (33) (50) (48) (21.5) (43) (40) (.14) (.10 ) 1.00 25.4 1" - 4 1.05 26.6-3/4" 1.57 2.32 2.24.94 1.89 1.77.33.27 (40) (59) (57) (24) (48) (45) A & B 1/4-20 x 1-3/4 (.15) () 1.26 32.0 1-1/4" - 5 1.33 33.7-1" 2.05 2.83 2.75 1.26 2.52 2.40.42.31 1.50 38.0 1-1/2" - (52) (72) (70) (32) (64) (61) A & B 1/4-20 x 2-1/2 (.19) (.14) 1.65 42.0-1-1/4" 6 1.75 44.5 1-3/4" - A 1/4-20 x 2-3/4 1.90 48.3-1-1/2" 2.60 3.46 3.38 1.42 2.83 2.72.53.40 2.00 50.8 2" - (66) (88) (86) (36) (72) (69) B 1/4-20 x 2-1/2 (.24) (.18) C-Rail.43 (11).08 (2) 1/4" -20 UNC C-Rail Nut Plastic Cap.43 (11) 39 (10).59 (15) h1 h 2 h 2 B - Arrangement a 1 B - Arrangement h 3 h 3 1.10 (28).96 (24.5).20 (5).39 ( 10)