Leveling Feet, Base Plates and Casters
|
|
- Samson Preston
- 5 years ago
- Views:
Transcription
1 Leveling Feet, Base Plates and Casters 77
2 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools. For use with 40 series profiles. Glass-filled nylon, black Spindle, nut and disk: St, galvanized Max. load N (337 lbs) Adjustment range 5mm (1 ) Leveling Foot 40 1 pc.68 kg Fastening to profile end (M8 Tap is required). Side fastening in T-slot. Easy mounting by using a M8 T-slot nut, no drilling necessary For leveling tables and light equipment. Height can be adjusted either by hand or with tools. Glass-filled nylon, black Spindle, nut and disk: St, zinc plated Max. load N (337 lbs) Leveling Foot 30 1 pc 47 g For leveling of light duty structures constructed of 0 series profiles. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max. load N (5 lbs) Leveling Foot 0 1 pc 1 g Knuckle Foot 30/8 Rubber insert in Knuckle Foot Adjustable height leveling foot for structures constructed of 30 or 8 series profiles. Rubber Insert is for vibrationdampening and floor protection. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max. load N (674 lbs) 1-011: Rubber, black Hardness 80º Shore A Oil and water resistant Knuckle Foot 30/8 1 pc 0 g Rubber Insert 30/8 1 pc g
3 Knuckle Foot 40 Self-aligning leveling adjustment has a max. tilt of 15º via ball and socket Adjustable height leveling foot for machine bases and other structures. Inclination adjustment is achieved via a ball cavity and socket. One size wrench adjusts both spindle and counter nuts. Both M8 and M10 feet can be attached to a serviced profile. Base: glass-filled nylon, black Spindle and nut: St, galvanized Max load: 1500 N (337 lbs) Dimensions (mm) Weight A B C D min D max g Part # M M Knuckle Foot 80 Self-aligning leveling adjustment has a max. tilt of 7º via spherical washer and form foot Adjustable height leveling foot for heavy duty structures. Require appropriate base plate for mounting. Base: Zn cast, black E-coated Spindle and nut: St, galvanized Max. load 10,000 N (,50 lbs) Dimensions (mm) Weight A B C * D min D max (kg) Part # M M * D min is without nut 79
4 Rubber Insert 80 1 Rubber Insert 80 in place Insert fits inside open cavity of Knuckle Foot 80 1 For vibration-dampening and floor protection with the Knuckle Foot 80. Rubber, black Hardness 80º Shore A Oil and water resistant Rubber Insert 80 1 pc 50 g 1-00 Clamping Shoe 80 Floor mounting fastener for Knuckle Foot 80. Zn cast, black powder coated Clamping Shoe 80 1 pc.47 kg 1-01 Floor Fastening Set 1 set.05 kg 1-03 Corner Mounting Plate Leveling and floor clamping attachment using hex bolts. Mounting plate for knuckle feet for leveling structure and/or permanent placement of structures. Al, black powder coat Order all hardware separately. Profile Fast. Set (1-031): two M8x50 SHCS and two M8 T-slot Nuts St Corner Mounting Plate 1 pc.74 kg Profile Fastening Set 1 set 60 g Floor Fastening Set 1 set 50 g 1-03 Leveling Screw (M1x45 SHCS) 1 pc 50 g
5 L-Base Leveling Foot Profile Dimensions(mm) Series Min Max /75* 30/ * 55 mm w/ partly threaded screw (provided) 75 mm w/ fully threaded screw Adjustable dimensions for 40 and 30/8 Extrusion with one L-Base Foot 3 Extrusion with two L-Base Feet in back to back configuration. Leveling foot and fastener for light and heavy duty equipment. Height adjustment is from the top. T-slot fasteners from the side. 1-0: Zn cast, black powder coated Max. vertical load - 10,000 N (,50 lbs) 1-063: Al, anodized Max. vertical load - 6,000 N (1,350 lbs) Include T-slot nuts, square nut and button head screws as shown. L-Base Leveling Foot 40 1 pc.8 kg 1-0 L-Base Leveling Foot 30/8 1 pc. kg Floor Fastening Set 1 set.05 kg 1-03 L-Base Floor Anchor 40 Non-Leveling For attachment of light or heavy duty equipment to floors and walls. Zn cast, black powder coated Includes T-slot nut M8 and M8x0 BHCS L-Base Floor Anchor 1 pc.0 kg 1-03 Floor Fastening Set 1 set.05 kg
6 Floor Mounting Bracket Economical bracket for mounting structures to floor or wall. Mounts to T-slots of 40, 30 or 8 series profiles. Al, clear anodized Order all hardware separately. 40 series: M8 T-slot nut (0-058 or 0-081), M8x0 BHCS (4-10-8) 30 series: M8 T-slot nut (0-058 or 0-091), M8x18 BHCS ( ) 8 series: M8 T-slot nut (0-057 or 0-091), M8x16 BHCS ( ) Floor Mounting Bracket 40 1 pc.8 kg Floor Mounting Bracket 80 1 pc.57 kg Floor Mounting Bracket 30/8 1 pc.19 kg Floor Fastening Set 1 set.05 kg
7 Flange Foot Heavy duty flange foot for attaching structures to floor. Tapped holes in base can be used for leveling 40 series profile only. St, black epoxy finish Order all hardware separately. M8x5 BHCS (4-15-8) for clamping profile M10x5 flat point set screw ( F) for leveling. Flange Foot 40x40 1 pc 1.55 kg Flange Foot 80x40 1 pc.19 kg Flange Foot 80x80 1 pc.79 kg *Other sizes available, contact your local service center Floor Fastening Set For attaching floor mounting elements (L-base and flange feet, etc.) to floor. Concrete wedge anchor 3/8-16 x 3 3/4", one washer, one 3/8-16 hex nut Floor Fastening Set 1 set.05 kg
8 Base Plate Bolts to cut off face of profiles for mounting lifting eyes and leveling feet. St, zinc plated Thickness (dim E): 15.9 mm Order all hardware separately. Profile Series Dimensions (mm) Weight (Dim D) A B C (kg) Part # M M M M M M M M M M M M * M * Counterbore details for 17-14: Dia.13, Dia. 3 x 8.5 Dp. Base Plate 160 For attaching and leveling profiles to the floor. The profile may be mounted anywhere in the T-slot. Base plate has a staggered T-slot pattern on opposite sides. Profile 160x8 Includes three M8x30 set screws, three 3/8" x 3 3/4" anchor bolts and two end caps 160x8 Base Plate set 1.6 kg
9 Casters Casters are available for rigid, swivel, braking or total locking applications. Load capacities range from kg ( lbs). s include mobile carts, tables, and heavy duty mobile structures such as equipment frames and carts. WHEEL LOAD RIGID SWIVEL LOCKING DIA kg (lbs) 50 mm ( ) 40 kg (88 lbs) (Wheel Brake) 75 mm (3 ) 55 kg (11 lbs) (Top Plate) (Total Lock) 100 kg (0 lbs) (Total Lock) 15 mm (5 ) (Top Plate) (Top Plate) 1-13 (Top Plate & Total Lock) 63 kg (580 lbs) (Triangular Plate) 85
10 Casters , , 1-1 Note: Screw length depends on caster dimention T and mounting method For mobile carts or tables. Center hole of profiles must be tapped for mounting with M8 or M10 screw. Casters can also be mounted to the profile side, either directly or using a base plate. Used with 40, 30 and 8 series profiles. Housing: pressed steel, zinc chromated with double ball bearing swivel head. Order all hardware separately Load Dimensions (mm) Capacity Weight Wheel Wheel Part # Type D W H R T D1 kg (lbs) kg Tread Center Swivel Rubber, Grey Pressed Swivel with (88) 0.4 Non-marking Steel 1-09 wheel Brake Rigid w/plate Antistatic Swivel (11).34 Heavy Pressed Swivel with Black Steel 1-07 Total Lock Rigid Hard 1-10 Swivel (0) 1.04 Soft Solid 1-11 Swivel with Rubber Rubber 1-1 Total Lock 86
11 Top Plate Casters , For heavy duty mobile structures such as equipment frames and carts. Mounting holes in various configurations. Housing: pressed steel, zinc chromated Order all hardware separately Load Dimensions (mm) Top Capacity Weight Wheel Wheel Part # Type D W H R T Plate kg (lbs) kg Tread Center Ball Rigid Blue Grey bearings (0) Rubber Pressed Steel Swivel Blue Grey Pressed Swivel with 130 (0) 1.9 Rubber Steel 1-13 Total Lock Swivel Phenolic Roller (580) Bearings 87
FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationAssembly Instructions
Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More informationSwerve Rack CUSTOM RACKS AVAILABLE
CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationCompany profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationPROFILE Flat Panel Console System Installation Manual
PROFILE Flat Panel Console System Installation Manual Table of Contents Page Introduction... 2 Important Safety Information...3, 4 Installation Overview... 4, 5, 6 Single Sided/Single Unit... 7 Double
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationTECHN. DATA/ITEMS SUPPLIED APPLICATIONS ASSEMBLY. - Connection of profiles
MOUNTING BRACKET 45 Part N 21.1411/0 - GD Zn, powder coated, grey Weight 0,426 kg - Connection of profiles - For subsequent fitting of profiles into existing constructions, displacable in direction of
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationStraight Stringer Installation Instructions
Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationSB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL
SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum
More informationMAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationUniversal flat-panel mount
I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate
More informationParts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationA Profiles. Extrusions/Fasteners. Dimensional Data. Part No. TSV4040. Part No. TSL4040. Part No. TSV4080
Contents Extrusions/Fasteners... 1-11 Enclosure/Gurarding Accessories... 12-30 Floor Accessories... 31-36 ParGlide Linear Motion... 37-45 Machining Services... 46-55 1 Extrusions/Fasteners Dimensional
More information400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationOnyx 90 Media Cutter. Parts Manual
Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your
More informationSection 4 Panels & Doors
Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers
More informationCRP700 Benchtop Basic CNC Machine Assembly Instructions. Updated 10/24/2014 SHEET 1 of 24
CRP700 Benchtop Basic CNC Machine Assembly Instructions Updated 0//0 SHEET of NOTE: This piece of extrusion is mounted wide side up Quick Tip: Lay extrusion on table as shown for easy assembly BASE ASSEMBLY:.
More informationCertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS. Fence Installation Guide 3', 4' & 6' High
CertainTeed INSTALLATION GUIDE SIMTEK FENCE PRODUCTS Fence Installation Guide 3', 4' & 6' High INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationAssembly Instructions. Table of Contents
HQ Little Foot Assembly Instructions Back of Handi Quilter, Inc. 501 North 400 West North Salt Lake, UT 84054 1-877-697-8458 Front of 2015 Handi Quilter, Inc. www.handiquilter.com Printed in the United
More informationBumper Sign INSTALLATION INSTRUCTIONS
Bumper Sign INSTALLATION INSTRUCTIONS BUMPERSIGN TOOL CHECKLIST SDS MAX Rotary Hammer Drill Marker/Pencil SDS MAX 1 Carbide Drill Bit Tape Measure Torque Wrench with ½ Drive Power Source Vacuum ½ Drive
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationJSP60617 KIA EXPRESS SERVICE TOOL KIT
JSP60617 KIA EXPRESS SERVICE TOOL KIT 60617-CAT TABLE OF CONTENTS JSP60617 Cart Inventory List...3 JSP60617 Cart Drawer Layout...4 Top Lid/Drawer Details...5 Drawer #1 Details...6 Drawer #2 Details...7
More informationPhone #: (360) Online Tech Support: Web:
Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz Your new Model D2058A Super-Heavy Duty Mobile Base () is designed to give you a stable and mobile platform upon
More informationOWNERS MANUAL. Model No UTILITY CART
OWNERS MANUAL Model No. 45-00 UTILITY CART CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts PRINTED IN USA FORM NO. 46274 LOOSE PARTS IN CARTON
More informationDuraRac Shelving System
GM Full Size Van Assembly Installation Instructions Sheet 1 of 13 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationJK TrailGate JK TrailGate
INSTALLATION INSTRUCTIONS INST-17-66-010_A JK TrailGate IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation. If
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationInstallation Instructions
Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The
More informationWarnings. Description. Prior to Installation Tools Needed
Warnings Failure to act in accordance with the following may result in death or personal injury. The JT Strong Arm Stabilizer System is intended to eliminate chassis movement in travel trailers and fifth
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More informationShapeoko XXL Assembly Guide
Shapeoko XXL Assembly Guide 04/27/2016 XXL Packing LIst Item Qty Description Y-Carriage (left) 1 Y-Carriage (right) 1 X/Z Assembly 1 40 Rail 3 1 rail has mounting holes for controller Wasteboard Half 2
More informationKaterack Wagon Shelving System
Ford Transit Connect Assembly Installation Instructions Sheet 1 of 14 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER
More informationTABLE OF CONTENTS REQUIRED TOOLS
TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationSupport Stands & Conveyor Mountings. Parts, Assembly & Maintenance Manual. Steel Support Stand. Aluminum Support Stand Rev.
Support Stands & Conveyor Mountings Parts, Assembly & Maintenance Manual Aluminum Support Stand Steel Support Stand -00 Rev. B Table of Contents Safe Practices............................... Foreword....................................
More informationRequired Tools: Suggested Additional Tools: 1 Cordless Drill with Robertson Bits 1 Ratchet Wrench 1 7/16 or 11mm socket 1 7/16 or 11mm Gear Wrench
Thank you for your recent purchase of a Cabinets by Hayley garage cabinet system. You are about to experience the best made cabinets that you can purchase. Cabinets by Hayley are designed for beauty and
More informationSTRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY
STRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY 150006 2014 Chief Automotive Technologies CO9110.1 Rev. A 12/19/14 F150 Structural Holding Tool Board Cart Step 1: Caster Assembly. A.) Assemble 5
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationGeneral Features. Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized
General Features Low Profile. The SMART BOXX stands only 1.5 off of the bed of your truck so cargo space is maximized Two Sizes Short Box :74 L X 47 W X 7 T and Long Box 92 L X 47 W X 7 T All Aluminium
More informationHIGH RISE Portable Restroom Assembly Instructions
HIGH RISE Portable Restroom Assembly Instructions 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 / Fax: 763-553-1905 800-328-3332/ www.satelliteindustries.com PN 20930 REV C 8/16
More informationPocket Shelter. Covered bike parking earns your site LEED credits.
Small and versatile, the Pocket Shelter stores bikes in areas that would not normally accommodate bike parking. This shelter is a modular system that provides covered and secure bike storage but is extremely
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationMobile Automotive Cart Assembly
General Information: The following provides step-by-step instructions for assembling the Mobile Automotive Cart. The finished assembly will consist of the following: (1) Cart bottom shelf, (1) or (2) shelves,
More informationAndyMark DART 12.
AndyMark DART 12 Part Number Description QTY These Parts Are Pre-Assembled by AndyMark am-0031 Bearing, 3/16"ID (R3) 1 am-0209 Bearing, 3/8"ID 1614ZZ 2 am-1028 Screw, #10-32x3/8 Pan Head Philips 8 am-1121
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationPRO Brake Operating Instructions
PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality
More information32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
More informationLOW-PROFILE WALLMOUNT CABINETS
USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationNext Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design.
T WO - T I E R B IK E LO C K E R Next Level Security We take long-term bicycle storage to new heights with the new Dero Two-Tier Bike Locker. It is easy to load and provides a space-saving solution to
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationEquipment, Inc. Time required: Less that 30 minutes. Load capacity of this truck is 800 lbs. Never exceed rated capacity! Avoid top-heavy loads.
Equipment, Inc. Thank you for buying this North Star Truck. It has been engineered to ship quickly and inexpensively by UPS and requires assembly. When put together, you will have a sturdy, very versatile
More informationKO LO SH E LT E R. High Capacity and Flexibility
KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
More informationInstallation Guide 406TH
Installation Guide 406TH (High Roof Shown) Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: Installation Instructions 406TH *PLEASE READ ALL INSTRUCTIONS AND WARNINGS
More informationMICRO-AIR DOWNDRAFT TABLES INSTALLATION AND OPERATION MANUAL
MICRO-AIR DOWNDRAFT TABLES AND OPERATION MANUAL DDT480 & DDT70 Includes Installation, Operation, and Service Instructions IMPORTANT This manual contains specific cautionary statements relative to worker
More informationInstallation and Assembly: Full Service Video Wall Mount
Installation and Assembly: Full Service Video Wall Mount Model: DS-VW765-LAND Max UL Load Capacity: 125 lb (57 kg) 1 of 12 ISSUED: 05-13-11 SHEET #: 145-9011-5 05-21-12 Note: Read entire instruction sheet
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationMAKO TM CASH DISPENSER
MAKO TM CASH DISPENSER PEDESTAL INSTALLATION GUIDE VERSION 2.0 TDN 0702-000 2/99 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationCRP700 Benchtop Basic CNC Machine Assembly Instructions. Updated 9/11/2014 SHEET 1 of 25
CRP700 Benchtop Basic CNC Machine Assembly Instructions Updated 9//0 SHEET of NOTE: This piece of extrusion is mounted wide side up Quick Tip: Lay extrusion on table as shown for easy assembly BASE ASSEMBLY:.
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationContractors Rack Assembly and Installation Instructions
Part # 18601 & 16601 Contractors Rack Assembly and Installation Instructions 4751 Littlejohn St. Unit A, Baldwin Park, CA 91706 Page 1 of 12 11/13/08 Thank you for purchasing the Paramount Restyling Contractors
More information