Section 4 Panels & Doors

Size: px
Start display at page:

Download "Section 4 Panels & Doors"

Transcription

1 Contents Section Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks Bifold Door Glide Mesh Retainers 107 Door Guide System 116 & Doors Mesh Clamp 108 Rollers 117 Clamp Bar 108 Roller Insert Stiffener/Handle 109 Panel Frame Fastener 119 Door Stop 119 Panel Profile 109 Rail Carts Parker Hannifin Corporation

2 Panel Characteristics Panel Selection Guide Recommended Use Opacity Cost Vertical, Horizontal, Shelving, Shelving, Transparent Non- Vertical, Non- No Load or Opaque Low Medium High Panel Type Structural Structural Structural Load Supporting See Through Polycarbonate Wire Mesh TRESPA Expanded PVC ABS Aluminum Honeycomb 1 Can be used, but not an economical solution. Panel Materials Polycarbonate Wire Mesh TRESPA Expanded PVC ABS Aluminum Honeycomb High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Clear or light grey smoked. Wire mesh provides a high level of security and can be used for safety guarding and enclosures. PVC coating provides a smooth, snag-free surface that is extremely rust and corrosion resistant. TRESPA is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be drilled and tapped. Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Not recommended for temperature over 90 C (194 F). Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Can be drilled and tapped. Special Items Special panel materials including color selection of stock material are available. IPS capabilities include custom machining of steel and alumunim panels for use in fixtures, machine bases and assemblies. Contact your local representative or an IPS Engineer to review special requirements. Special item availability includes: Machined Steel and Aluminum Surfaces Perforated Metal Decking Welding Curtains Decorative Glass and Clear Plastic Composites Sound Insulating Wood and Laminate 100 Parker Hannifin Corporation

3 High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Polycarbonate, clear or light smoked UL Listed Maximum Size: 119. x 438.4mm (4' x 8') Polycarbonate * 6mm Polycarbonate Clear m 7.6 kg/m P 6mm Polycarbonate Light Smoked m 7.6 kg/m P *Call for other shades and thicknesses. * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Wire mesh provides a high level of security and can be used for safety guarding and enclosures. Provides a smooth, snag-free surface that is extremely rust and corrosion resistant. Flat welded steel wire with fusebonded PVC coating. Maximum Size: 119. x 438.4mm ( 4' x 8') * Description Wire Gage Unit Weight Part # 1/ x 1/ Black 16 m.89 kg/m P 1 x 1 Black 1 m 4.17 kg/m P 1 x 1 Yellow 1 m 4.17 kg/m P 1½ x 1½ Black 1 m.98 kg/m P x Black 1 m 1.9 kg/m P Wire Mesh & Doors * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. TRESPA is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be cut, drilled and milled. Suitable for doors, shelves and enclosures. Thermosetting resins, homogeneously reinforced with cellulose fibers. Non-toxic, asbestos free, has good fire retarding characteristics. Finished on both sides. Maximum Size: x 438.4mm ( 6' x 8') TRESPA Weight Part #* Thickness Unit (kg/m ) Black Grey Blue White 6mm m P P P P 8mm m P P P P 10mm m P P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. 101 Parker Hannifin Corporation

4 Expanded PVC Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Rigid expanded foam polyvinyl chloride (PVC) UL Recognized Maximum Size: 119. x mm (4' x 8') * 6mm Expanded PVC Black m 4.19 kg/m P 6mm Expanded PVC Blue m 4.19 kg/m P 6mm Expanded PVC - White m 4.19 kg/m P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. ABS Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. Acrylonitrile butadiene styrene Maximum Size: 119. x mm (4' x 8') * 6mm ABS Black m 6.85 kg/m P 6mm ABS White m 6.85 kg/m P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Aluminum Honeycomb These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Skins T6 Anodized Aluminum Maximum Size: 119. x mm (4' x 8') except P: 106 x 45mm (3.96' x 7.96') * 6mm Aluminum Honeycomb Black m 7.8 kg/m P 6mm Aluminum Honeycomb Clear m 7.8 kg/m P 6mm Aluminum Honeycomb Blue m 7.8 kg/m P 6mm Aluminum Honeycomb - White m 7.8 kg/m P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Black tyle has a finished dimension of 47.5" x 95.5"(106 x 45mm). 10 Parker Hannifin Corporation

5 Panel Mounting 1 Multiblock PA and Uniblock PA Versatile block for mounting panels and screens. The block locks into the T-slot at a 90 position with an offset design to suit various panel thicknesses. Movable captive nut provides larger alignment range for locating through holes in panels Glass Filled Nylon, Black Square Steel Nut, M6 or M4 Spacing Table 1 Floating square nut secured within the multiblock by flat spring provides for alignment flexibility Insertion of Multiblock PA in the T-slot 3-4 Recommended gaps for assembling Multiblocks PA 5 Distance between Multiblock center and floating nut Profile Max Load Dimensions (mm) Series N (lbs) A B C (56) , 8 10 (47) () (56) & Doors Multiblock PA Various options for flush panel mounting of Multiblock PA 40 5 Determining the length of M6 screw on Multiblock PA Series 40 Multiblock PA 40 with M6 Nut Each 13 g Parker Hannifin Corporation

6 Panel Mounting Multiblock PA 30/ Mounting options for Multiblock PA 30/8 on 8 series profiles 5-6 Mounting options for Multiblock PA 30/8 on 30 series profiles Series 8/30 Multiblock PA 30/8 with M6 Nut Each 10 g -103 All Universal Multiblock PA with M6 Nut Each 10 g Uniblock 1/4-0* Each 6 g * 6mm panels only, no offset. Uniblock PA Mounting options for Uniblock PA Profile Series 8/30 Uniblock PA 0 with M4 Nut Each 3 g Z1 104 Parker Hannifin Corporation

7 Panel Mounting Multiblock PA with 1/4 Turn Receptacle Panel mounted to Multiblock PA 40 with 1/4 Turn Receptacle Panel mounted directly to profile with receptacle pressed into profile 3 Panel mounted to 19" Rack Angle with 1/4 Turn Receptacle for light or dust tight applications 5-10 & Doors For easy, quick removable mounting of panels to 40 Series profiles. Multiblock locks into T-Slot at 90 O position. The stud will not fall out of properly machined holes when panel is removed. Glass Filled Nylon (Black) Receptacle and stud: Steel, galvanized Order Stud Separately Z Profile Series 40 Multiblock PA 40 with ¼ Turn Rec. Each 16 g -10 ¼ Turn Receptacle Each 4 g -10Z ¼ Turn Socket Stud (6mm panels) Each 4 g Parker Hannifin Corporation

8 Panel Mounting Clamp Multiblock 1 E F 3 1 Mounting position for panels up to 10mm thick to clamp Multiblock 40. Mounting position for panels up to 5mm thick Multiblock rotated180 3 Edge distance between panel element and profile D C B A Mounting element for attaching panels to 40, 30 and 8 Series profiles without using additional fasteners or machining the panel. Insert multiblock into T-Slot at any location and lock in position by turning 90 O clockwise. Slide locking clip to secure the panel. To remove panel, loosen locing clip with a flat screwdriver. Glass Filled Nylon (Black) For -11: Max load in direction F per drawings above is 50N (56lbs); in opposite direction: 50N (11lbs) Max Panel Thicknesses -11: 10mm (3/8") -113: 8mm (5/16") Dimensions (mm) Weight Series A B C D E F (g) Part # / Multiblock Al 5.4 3x D 4x A B A 11.0 C Mounting element for panels and accessories. Various mounting dimensions are obtained by rotating the block. Order hardware separately. Dimensions (mm) Al, clear anodized Max. load at 90 angle to T-slot: -105: 500 N (11 lbs) -106: 750 N (169 lbs) -108: 1000 N (5 lbs) Series A B C D Weight Part # 40, 30, 8 M5 18 g -105 M g -106 M g Parker Hannifin Corporation

9 Wire Mesh Retainers Back Plate included but not shown on dimension drawings. Deluxe H G E D Deluxe retainers are used to securely fasten wire mesh within the T-slot of 40 Series profiles. This accessory requires screws and T-nuts to mount to profile, order these items separately. Aluminum, Black 5/16-18 BHCS included to secure back plate to retainer. J K L A Back Plate included but not shown on dimension drawings. F C B 0-0 Recommended Fastening Hardware (Order Separately) Screws M8 x 16 BHCS [ ] T-Nuts M8 T-Nut [0-058] Dimensions (in) Style A B C D E F G H I J K L (g) Part # Single Double Wt. H J K L I A G F D E B C & Doors 0-03 Economy Economical solution for securely fastening wire mesh to 40 Series profiles. Back Plate included but not shown on dimension drawings. Steel, Zinc Plated BHCS included to secure back plate to retainer Ø7 Unit Weight Part # Economy Wire Mesh Retainer M6 Each 59 g -110 Economy Wire Mesh Retainer 1/4-0 Each 59g Parker Hannifin Corporation

10 Panel Profiles Mesh Clamp Profile Flat Bar 1.7 x 3. M6x6SetScrew [ F] Captures wire mesh panels up to 5.5mm thick. Excellent for constructing safety guards. Installs onto 40, 30 and 8 series profiles without additional fasteners. A B Length=A-1mm Length = B - 33mm mm ±mm TYP Aluminum, Clear Anodized Weight: 0.53 kg/m Tapped for M6 every 00mm (±mm) Includes clamp strip and M6x6 flat point screws * Wire Mesh Size: A - 6mm and B-6mm Standard fastener position is critical to avoid interference with the mesh clamp. Description Unit Part # Mesh Clamp Profile Cut off max. 4m *Saw Cut Needed for Cut to Length Clamp Bar Attaches 40 Series profiles to base plates or other parts. Must be used in pairs. Not recommended for linear applications. Aluminum, Clear Anodized Weight: 1.4 kg/m M8 BHCS Cut to Length and Service as required Description Unit Part # Clamp Bar Profile Cut off max. m *Saw Cut Needed for Cut to Length Parker Hannifin Corporation

11 Panel Profiles Designed as a combination handle and stiffener for sliding panel doors (1/4" thick material). snap into the profile slot and may be secured by an adhesive or a fastener. Aluminum, Clear AnodizedWeight: 0.93kg/m Stiffener/Handle [1-011] Stiffener/Handle Profile Description Unit Part # Panel Stiffener/Handle Cut off max. 3m *Saw Cut Needed for Cut to Length Extrusion for mounting 34mm (1.34") thick insulation panels onto 40 Series profiles. Extrusion can be serviced to mount on profile using T-Slot nuts or with double sided tape. Insulated Panel Panel Extrusion [1-018] Fastener Set [0-058 and 4-1-8] Panel Extrusion & Doors Aluminum, Clear Anodized Weight: 0.48kg/m 40 Series Profile 15.6 Description Unit Part # Panel Extrusion 40 Cut off max. 6m *Saw Cut Needed for Cut to Length Parker Hannifin Corporation

12 Panel Profiles Rolling Door Guide Handle Fastening See Detail 4 40 Series Profile Guide Insert [1-067] X mm (1/4") Panel Vinyl Panel Gasket [1-106] T-Slot 8 B C A T-Slot Rolling Door Guide Profile [1-0] Door Framed by 3x18 Bi-Slot [1-03] Roller Insert [1-068] M6x16 Set Screws 10 5 Connection Method 1 41 Standard Fastening Set [0-00] OR Leave 5mm Clearance for Std. Fastener 4 Flat Plate Connector [0-08z1] Drill & Tap M5 x 10mm Deep On Center M5x1BHCS [4-31-5L] * Recommend fastener every 50mm 0 Mill Key Back 5mm mm Gap M6 Econ. T-Nut [0-190] Opt. Spring [ ] Connection Method Length of vertical door member: B = A - 11mm For 1/4" Panel with panel gasket [1-106]: C (panel height) = B + 16mm For 5/16" Panel without gasket: C (panel height) = B + 3mm 3-4 Connection methods for assembling the door guide to 40 Series profiles. 5 mm Gap M6x14SHCS [ ] Ø Designed for large doors with removable door panels for maintenance. s include case packers, material handling equipment, packaging installations and access panels for large machine enclosures. Profile Aluminum, Clear Anodized Weight: 1.78 kg/m Guide Insert UHMW (white) Roller Insert Roller: Delrin (black) Housing: Aluminum, Clear Anodized Pin: Steel Description Unit Part # Rolling Door Guide Profile Cut off max. 4m 1-0 Guide Profile UHMW Cut off max. 3.1m 1-41 *Saw Cut Needed for Cut to Length Guide Insert Set Each Roller Insert Set Each Roller Set includes (1) housing, (1) roller, () M6X14 SCHS screws and () offset T-slot nuts with compression spring. Guide Set includes (1) 50mm guide insert, () M6X16 setscrews. 110 Parker Hannifin Corporation

13 Panel Profiles 8 Series Sliding Door Guide Sliding Door Guide Upper A B 17 Any Panel (up to 1/4") TYP. 7 TYP. 9 Sliding Door Guide Lower 1-01 Stiffener/Handle [1-011] R 7 TYP. TYP. Removable 40 Series 30/8 Series B = A - 15mm B = A - 15mm 10 Non-removable B = A - 10mm B = A - 11mm *Designed for panels up to 1/4 (6.4mm) & Doors These profiles create light duty sliding panels for windows and access ports for safety guards, enclosures or partitions. Installation onto 40, 30 or 8 series profiles do not require fasteners and will snap into the T-slot. The lower guides are designed to reduce friction. The upper guides facilitate liftout removal of the panel without disassembly. Tamper proof mounting may also be provided. Aluminum, Clear Anodized Three panel tracks Panel width up to 6.4mm Weight: 1-01, kg/m 1-013, kg/m Description Unit Part # 40 Series Profile Sliding Door Guide 40 Upper Cut off max. 3m 1-01 Profile Sliding Door Guide 40 Lower Cut off max. 3m /30 Series Profile Sliding Door Guide 30/8 Upper Cut off max. 3m Profile Sliding Door Guide 30/8 Lower Cut off max. 3m *Saw Cut Needed for Cut to Length R TYP TYP Parker Hannifin Corporation

14 Bifold Doors Bifold Door Glides 5/16-18 x 3/4" FHCS Spacer Door Glide Washer Tap 5/16-18 x 3/4" deep A C D 40 Series B E 1/4-0 x 3/4" FHCS Spacer Door Glide F Washer Tap 1/4-0 x 3/4" deep 30/8 Series Bifold doors are used in very confined areas. Door glides allow rotational and sliding motion at the top and bottom of a vertical member within a permitted bifold door frame. Two glides (one top and one bottom) are required per door. Door Glide UHMW Spacer Steel, Zinc Plated Washer Steel, Zinc Plated Note: Hardware and tap are SAE Standard Ships complete with glides, screws, spacers and washers. Dimensions (mm) Part # A B C D E F Ø15. thru c sink Ø19 x Ø11.1 thru c sink Ø14 x 90 Use the following chart to help select the correct part for your application. Frame Series Door Series Glide Part # 40 & 80 Series 40 Series & 80 Series 30/8 Series Series 8 Series Parker Hannifin Corporation

15 Bifold Doors Design Examples Examples consider the hinges to be medium duty plastic hinges (page 131). Other hinges can be used and dimensions would only be slightly affected. Bifold Door Glides Design Example for 40 Series Bifold Door To determine the width of the narrow door, subtract the sum of the door gaps and 48mm from the frame's inside width dimension, then divide by. Example: 660 ( ) = = To determine the width of the wide door, add 48mm to the width of the narrow door. Example: = To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension. & Doors Example: = Design Example for 8 Series Bifold Door To determine the width of the narrow door, subtract the sum of the door gaps and 36mm from the frame's inside width dimension, then divide by. Example: 660 ( ) = = To determine the width of the wide door, add 36mm to the width of the narrow door Example: = 340 To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension. Example: = * When using 8 Series for the doors and 40 Series for the frame, use the design example for 8 Series. 113 Parker Hannifin Corporation

16 Doors Sliding Door Set Packaged system for creating a sliding door with 40 series profiles. The set consists of the necessary supports, rollers and roller housing to mount the movable sliding panel to an assembly. Hardware will vary based on design and must be ordered separately. Supports: Aluminum, Clear Anodized, Fully machined for assembly Rollers: Roller PA 40 (1-069) Roller Holders Sliding-Door Set Set 36 g Parker Hannifin Corporation

17 Doors See page 46 for application details Sliding Door Guide & Doors 1 1 Two sliding doors in T-slot of a 40 series profile Four sliding doors in T-slots of an 80x40 profile Mounting dimensions within a frame 4 Slide piece positioning in the T-slot 5 Guide pieces function as stops when two doors slide in the same T-slot 5 Allows a door constructed of 3x18 Bi- Slot profile to slide in the T-Slot of a 40 Series profile. This guide attaches to the door frame through a 7mm mounting hole. Two Guides with opposite offsets are available, allowing panels to be mounted in a single T-Slot. Polyoxymethylene, Black Spring/Spring Bolt are Steel Set includes four guides two of each offset. Door Sizing size door 15mm smaller than frame opening. Door gap will be 7mm at bottom and 8mm at top. Sliding-Door Guides for 3x18 Bi-Slot Set 36 g Parker Hannifin Corporation

18 Doors Door Guide System Sliding Door Shock Absorber [31-037Z3A] Reversing Unit [31-1, or 31-16] Timing Belt [ ] Locking Screw [4-695] Conduit Cap [15-805] Door Guide [3-055] Wireway Conduit [15-081] & [15-08] Closure Plate Set 80x80 [1-155] 4 M6 Locking Screw [4-695] Conduit Cap [15-807] 1 Counterweight Assembly Wireway Conduit [15-08] & [15-161] Closure Plate Set 80x160 [1-156] 1 Assembly of the Door Guide System Sliding Door with two counterweights 3 Assembly of the Door Guide 4-5 Counterweight Assemblies 80x80 and 160x M6 Door guides are used to build doors that operate between two vertical 40 series profiles. The weight of the door may be counter-balanced by one or two counterweights that are connected to the door space with door guides, timing belt 5T10 and reversing unit 40. The size of the counterweight is determined by the weight of the door. The operation of the door may be motorized by attachment of a suitable drive to one of the reversing units. Door Guides Four guides are usually attached to the door, and slide in the inside slots of the vertical 40 series profiles. Two guides are attached to each of the counterweights, and slide in the outer slots of the vertical frame profiles. Counterweights Duct wall support and wall profiles are used to build the counterweight. A closure plate attached with four M6 Profile-to-Wall Fasteners forms the bottom of the counterweight. Heavy metal scrap may be used as filler material. Suitable conduit cap is used to close the top of the counterweight. Closure Plate St, black epoxy finish Complete with fastening set Door Guide: Polyoxymethylen, black Complete with the following: Steel plate insert, M6x5 BHCS, M6 T-slot nut St, three M6x5 SHCS, and three M6 hex nuts Door Guide 1 set 0.1 kg Closure Plate 80x80 1 set 0.48 kg Closure Plate 160x80 1 set 0.96 kg Parker Hannifin Corporation

19 Doors Roller and details for sliding door with Roller PA 40 5 Servicing for Roller PA mounted in 40x40 Heavy profile 6 Mounting the Roller PA 40 for a sliding panel application 7 Max. load F = 150 N 8 Dimensions of offset on 40 series profile 7 8 & Doors Versatile ball bearing roller which can be mounted in the T-slot. Roller has asymmetric design for various clearance dimensions such as on sliding doors and panels. Glass-filled nylon, black complete with two deep groove ball bearings with dust covers and two M6 flat washers Max. load 150 N (34 lbs) Leave 9mm offset between profiles. Roller PA 40 1 pc 3 g Shoulder Bolt M5x6x5 1 pc Roller 0 Versatile ball bearing roller which can be mounted in the 0 Series T-Slot. Roller has asymmetric design for various clearance dimensions such as on sliding doors and panels. Polyoxymethylen, Black Includes Bearing Hub and Washer Max Load: 50N (11lbs) Roller 0 Set 40 g Parker Hannifin Corporation

20 Doors Roller Insert 5 1 FOR M6 SHCS Rolling door constructed with 8 series profiles guided on top with UHMW strip Two bypassing covers constructed with 8 series profiles rolling on a pair 30x60 profiles. 3 Clearance dimensions 4 Required machining for mounting roller insert to a 40, 30, or 8 series profile Z1 5 Versatile roller mounted in a housing. Can be attached to any 40, 30 or 8 Series profile with proper machining. Step roller is available without housing for sliding panel applications. Roller: Delrin, Black Housing: Aluminum, Clear Anodized Pin: Stainless, Steel Hardware not included Recommended Hardware Profile Series Screws (Order ) T-Nut (Order ) 40 M6x14 SHCS [ ] M6 Offset Economy [0-190] 30 M6x1 SHCS [4-31-6] M6 Offset Economy [0-190] 0 M6x10 SHCS [ ] M6 Offset Economy [0-190] Roller Insert 5 Each 3 g Step Roller 5 Each 8 g 1-065Z1 Machining to mount internal to profile Each Parker Hannifin Corporation

21 Miscellaneous Panel Frame Fastener Frame element with four sets of Panel Frame Fasteners Provides for quick and easy attachment of framed panels to a post. Fastener halves may be secured with a screw from the front or the rear. Designed for use with 40 series profiles but can be used on 30 and 8 series if alignment pins are removed. Glass-filled nylon, black Set includes: two frame fastener halves, one M6 washer and one M6x16 SHCS Order all hardware separately Fastening Set 3-050: two M8x5 BHCS, two rib spring washers and two M-8 T-slot nuts & Doors Panel Frame Fastener 1 set 37 g Fast. Set for Panel Frame/Door Stop 1 set 40 g Door stop for swinging doors. Attaches with screws anywhere along the T-slot. Door Stop Glass-filled nylon, black Set includes two door bumpers Order all hardware separately Fastening Set 3-050: two M8x5 BHCS, two rib spring washers and two M8 T-slot nuts Door Stop 1 set 30 g Fast. Set for Panel Frame/Door Stop 1 set 40 g Parker Hannifin Corporation

22 Doors Rail Carts 0 M5x6x50 Shoulder Bolt M6 Washer Rail Cart, 4 Roller [3-01] 1mm Gap Teflon Tubing 3mm Spacer M5 Tap [3-0] Kit Includes Rail Cart and Hardware 3 3 Order Hardware Separately M4 T-Nut Zn [0-034] Nylon Spacer M4x0 SHCS [4-30-4] TYP M Required clearance C and required gap B depend on location of pivot point A. For 40 Series Profiles: B = A A C = A For A 7 B = 7 - A 4 1 Assembling the 4-Roller Rail Cart to a door frame. Apply Loctite to M6 screw to prevent loosening. Guide along lower section for sliding door using nylon spacer (8mm long, O.D. 8mm) Calculations for Bi-fold sliding doors 3 Sliding Door and Bi-fold sliding door assemblies 4 8-Roller Rail Cart assembly in 80x40 Rail profile 3-00 Designed for use in 80x40 Rail Profile part # (See Linear Section). Rail carts used for hanging and sliding doors and other hanging components such moving material on workstations. Housing: Aluminum, Clear Anodized Wheel: Delrin, needle roller bearings Washer: Nylon Hardware included with 3-0: Bolt, washer, Teflon tubing and 3mm spacer. FOR M8 SHCS Description Unit Weight Max LoadN (lbs) Part # 8-Roller Cart Set 0.0 kg 440 (100) Roller Cart Each 45 g 0 (50) Roller Cart with Fastening Set Set 64 g 0 (50) 3-0 Profile Unit Weight Part # Profile 80x40 Rail Transport Cut off 6m max kg/m *saw cut needed for cut to length Parker Hannifin Corporation

Panels, Panel Mounting & Other Accessories

Panels, Panel Mounting & Other Accessories Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock

More information

IPS ID 92*14* Series. 40 Series. 28 Series. 30 Series. 40 Series. Catalog 1816 Introduction, En México llame. . Nextel.

IPS ID 92*14* Series. 40 Series. 28 Series. 30 Series. 40 Series. Catalog 1816 Introduction, En México llame. . Nextel. Catalog 86 Introduction, En México llame. Nextel. 498 0846 ID 92*4*72847... I 20 Series 2-20 p34 40 Series 2-020 p34 2-24 p34 2-040 p34z 2-26 p34 2-08 p34 2-2 p34 0-04 p3 0-042 p3 0-083 p20 28 Series 2-028

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

AndyMark DART 12.

AndyMark DART 12. AndyMark DART 12 Part Number Description QTY These Parts Are Pre-Assembled by AndyMark am-0031 Bearing, 3/16"ID (R3) 1 am-0209 Bearing, 3/8"ID 1614ZZ 2 am-1028 Screw, #10-32x3/8 Pan Head Philips 8 am-1121

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC

More information

Fast, Flexible, Functional

Fast, Flexible, Functional FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT

More information

Enclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security

Enclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194

More information

A Profiles. Extrusions/Fasteners. Dimensional Data. Part No. TSV4040. Part No. TSL4040. Part No. TSV4080

A Profiles. Extrusions/Fasteners. Dimensional Data. Part No. TSV4040. Part No. TSL4040. Part No. TSV4080 Contents Extrusions/Fasteners... 1-11 Enclosure/Gurarding Accessories... 12-30 Floor Accessories... 31-36 ParGlide Linear Motion... 37-45 Machining Services... 46-55 1 Extrusions/Fasteners Dimensional

More information

WPS crew Doors Installation instructions

WPS crew Doors Installation instructions WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2

More information

Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS

Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM

More information

Oxford Stalls Installation Instructions

Oxford Stalls Installation Instructions Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or

More information

TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR FORD FLARESIDE TRUCKS

TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR FORD FLARESIDE TRUCKS TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR 53-87 FORD FLARESIDE TRUCKS Vise Grip Clamps C-clamps Sharpie Marker Ball Peen Hammer Center Punch 3/8 or 1/2 Drill 5/32, 7/32, 9/32, and 3/8 Drill Bits

More information

model tsa-sa48 Sliding Crosscut Table installation guide

model tsa-sa48 Sliding Crosscut Table installation guide model tsa-sa48 Sliding Crosscut Table installation guide A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop

More information

B Connectors. Automation. Structural Framing System Connectors & Fasteners

B Connectors. Automation. Structural Framing System Connectors & Fasteners BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts

More information

Assembly Instructions 10 X 10 Aluminum Frame Building

Assembly Instructions 10 X 10 Aluminum Frame Building Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal

More information

GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:

GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST: PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers

More information

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

Assembly Instructions 10 X 10 Aluminum Roof Support

Assembly Instructions 10 X 10 Aluminum Roof Support Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1

More information

Warnings. Description. Prior to Installation Tools Needed

Warnings. Description. Prior to Installation Tools Needed Warnings Failure to act in accordance with the following may result in death or personal injury. The JT Strong Arm Stabilizer System is intended to eliminate chassis movement in travel trailers and fifth

More information

T-Slot Aluminum Framing. Parker Industrial Profile Systems

T-Slot Aluminum Framing. Parker Industrial Profile Systems T-Slot Aluminum Framing Parker Industrial Profile Systems T-Slot Aluminum Framing Solutions Everything You Need to Build Anything Parker s extensive line of structural T-slot aluminum extrusions, fasteners,

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

Sliding Crosscut Table installation guide

Sliding Crosscut Table installation guide Sliding Crosscut Table installation guide model tsa-sa48 A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop

More information

OPERATIONS MANUAL. Port-O-Slitter

OPERATIONS MANUAL. Port-O-Slitter Tapco Products Company The World Leader in Specialty Tools for the Professional Port-O-Slitter OPERATIONS MANUAL General instructions, set up, accessories and guide to using your portable precision slitting,

More information

PRO Series Brakes Operating Instructions

PRO Series Brakes Operating Instructions PRO Series Brakes Operating Instructions Tapco Products Company PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock,

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS

N. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS 1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems

More information

Custom Wood Frame Overlay for Glass Doors Installation Instructions

Custom Wood Frame Overlay for Glass Doors Installation Instructions MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers

More information

EDGE-, COVER-, SLIDEAND SEALING PROFILES

EDGE-, COVER-, SLIDEAND SEALING PROFILES PROFILE SYSTEM EDGE-, COVER-, SLIDE- AND SEALING PROFILES s e l i f o r P gn i l aes dna - ed i l S, - r evoc, - egde EDGE-, COVER-, SLIDEAND SEALING PROFILES These profiles are used for groove covering

More information

PRO Brake Operating Instructions

PRO Brake Operating Instructions PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality

More information

11 MACHINING SERVICES

11 MACHINING SERVICES 11 MACHINING SERVICES Machining your TSLOTS is an alternate way of assembling your project. Rather than using brackets and joining plates you can have your TSLOTS machined and ready in kit form for quick

More information

STOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets

STOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench

More information

Customer Notice: Congratulations again on your SawStop purchase, and thank you! -SawStop Tualatin, OR

Customer Notice: Congratulations again on your SawStop purchase, and thank you! -SawStop Tualatin, OR Customer Notice: Congratulations on the purchase of this Sliding Crosscut Attachment. As the owner of a SawStop saw, you are familiar with our high standards for quality, fit and finish. Different from

More information

Linear Hook- on Worksurfaces

Linear Hook- on Worksurfaces Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep

More information

Kai Installation Instructions

Kai Installation Instructions Kai Installation Instructions Before Beginning Installation Read through the entire instruction thoroughly A minimum of 2 people are required for this assembly These instructions reflect typical assemblies;

More information

FIXED PANEL SLIDER QCI5241

FIXED PANEL SLIDER QCI5241 INSTALLATION INSTRUCTIONS FIXED PANEL SLIDER QCI5241 FRAMELESS PANEL / DOOR / PANEL FRAMELESS DOOR / PANEL QCI5241 REV. 0 Page 1 Certified 06/16/2016 Parts List *Quantities may vary QCI5241 REV. 0 Page

More information

Door & Window Systems

Door & Window Systems Lift Slide CURRENT LOGO Door & Window Systems Lift Slide Door & Window Pages System Components B-2 to B-5 Door Carriages & Gears B-6 to B-8 Half Gears, extensions B-9 to B-10 Window Carriages & Gears B-11

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

Wooden Frame Type Instruction Manual

Wooden Frame Type Instruction Manual Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand

More information

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack

More information

Preference Collection and Treatment Console INSTALLATION GUIDE

Preference Collection and Treatment Console INSTALLATION GUIDE Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious

More information

installation guide 1 GUIDE#: pwb-assault-001

installation guide 1 GUIDE#: pwb-assault-001 assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the

More information

Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series

Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series Versatrac Bypass Door Units, Conventional and Top Track, 300 and 400 Series TM Rough opening width (finished opening width plus 9/16") Notch for top track units (used as frame header) Rough opening height

More information

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty Please read this owner s manual before use and keep it at hand for reference. OWNER S MANUAL Safety Important safety instructions for using the INCRA Miter5000 Before using the INCRA Miter5000, read and

More information

19-in. Mini-Rack Cabinet, Type 1

19-in. Mini-Rack Cabinet, Type 1 Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /

More information

Post & Rail Crossbuck

Post & Rail Crossbuck Post & Rail Crossbuck 1. Getting Started 6. Crossbuck Be sure to call underground prior to digging Assemble gates (if necessary) and decide where they will be located Stake out the fence line Space and

More information

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut

8mm x 25mm Z Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left

More information

Grand Slam 380 and Grand Slam 380XL Installation Instructions

Grand Slam 380 and Grand Slam 380XL Installation Instructions Grand Slam 380 and Grand Slam 380XL Installation Instructions Patent #7,114,283 GS-380 GS-380XL Taco Metals, Inc., info@tacomarine.com TacoMarine.com Thank you for purchasing a quality Taco Marine product.

More information

Franklin Mills Stackable Movable Lateral Instructions

Franklin Mills Stackable Movable Lateral Instructions Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11

More information

Installation Instructions for Vista Air Vertically Folding Walls

Installation Instructions for Vista Air Vertically Folding Walls Installation Instructions for Vista Air Vertically Folding Walls Use these instructions in conjunction with your shop drawings to see the specifics that are particular to the model you are installing.

More information

101B, 210X, ELM, VSTB Installation Manual

101B, 210X, ELM, VSTB Installation Manual 101B, 210X, ELM, VSTB Installation Manual 99-16105-I001 Copyright 2010 by ALL rights reserved. Information in this document is subject to change without notice. Companies, names and data used in examples

More information

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block

More information

Miter Saw Super Stand

Miter Saw Super Stand Quality Power Tool Accessories OWNER S MANUAL Miter Saw Super Stand Models 2875/2875XL IMPORTANT Read and understand all safety guidelines and instructions carefully before operating. GENERAL INFORMATION

More information

table of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops

table of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset

More information

00108/00110 INSTRUCTION MANUAL

00108/00110 INSTRUCTION MANUAL 00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Exhaust Systems Note: Any modifications to the factory installed exhaust system may void your manufacturer s warranty.

More information

installation guide 1 GUIDE#: pwb-assault-004

installation guide 1 GUIDE#: pwb-assault-004 assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the

More information

INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2

INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2 INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks

More information

MobileTrak5 Installation Instructions

MobileTrak5 Installation Instructions MobileTrak5 Installation Instructions PLEASE OPEN ALL BOXES & CHECK TO MAKE SURE YOU HAVE ALL PIECES REQUIRED READ ALL INSTRUCTIONS BEFORE STARTING Tools Required for Assembly 7/16, 1/2 Wrench Phillips

More information

ABM International, Inc. Navigator Assembly Manual

ABM International, Inc. Navigator Assembly Manual ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor

More information

a.k.a. casegoods instructions

a.k.a. casegoods instructions a.k.a. casegoods instructions a a.k.a. workwall installation IMPORTANT NOTES Failure to install product according to installation instruction will result in loss of warranty. Tools required for assembly

More information

1. TOOLS + MATERIALS REQUIRED

1. TOOLS + MATERIALS REQUIRED R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED

More information

CAB END BEDTRAX (SIDE VIEW)

CAB END BEDTRAX (SIDE VIEW) Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO

More information

BY ALIEN TECHNOLOGIES CORP

BY ALIEN TECHNOLOGIES CORP BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Palm Beach Polysatin Shutters CONTENTS Getting Started Installation Overview...1 Unpacking...1 Tools and Materials Needed...1 Fasteners...2 Frame Assembly Assemble the Frame

More information

Flat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold

Flat Panel Stand FPZ-655. for 32 to 55 Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination

More information

KIT. Assembly Instructions. HayDay, LLC

KIT. Assembly Instructions. HayDay, LLC KIT Assembly Instructions HayDay, LLC 1-800-732-1654 www.stablegrazer.com Read completely through the assembly instructions before starting assembly. The Stable Grazer Kit comes in two boxes. Remove all

More information

OXYGEN INSTALLATION. Revision date

OXYGEN INSTALLATION. Revision date 12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex

More information

mk Profile Technology

mk Profile Technology mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four

More information

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides

Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3

More information

Quill Stop V2 Installation Guide 11/16/2014

Quill Stop V2 Installation Guide 11/16/2014 Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What

More information

How To Measure Your Finished Opening

How To Measure Your Finished Opening 3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips

More information

Versatrac R-System Stock Extrusions, Clips and Accessories

Versatrac R-System Stock Extrusions, Clips and Accessories Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear

More information

OPERATIONS MANUAL. Port-O-Slitter

OPERATIONS MANUAL. Port-O-Slitter OPERATIONS MANUAL Port-O-Slitter General instructions, set up, accessories and guide to using your portable precision slitting, rib forming and perforating system Saves hours on large siding jobs! Featuring:

More information

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS

400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS 12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions

More information

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.

More information

Installation for Full Size Polaris Ranger Crew Doors

Installation for Full Size Polaris Ranger Crew Doors Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated

More information

PowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

PowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered. Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Installation Instructions

Installation Instructions Contents Page General Information and Installer Tips.......... 2 Panels & Posts............................. 3 Enclosure Description..................... 4 Hinge Door Hardware................... 4-5 Step-by-Step

More information

This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.

This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4

More information

RAMPAGE P R O D U C T S. INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED

RAMPAGE P R O D U C T S. INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED RAMPAGE P R O D U C T S 84 (+/- 1/4 ) INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO 1966-1977 TOOLS REQUIRED 3/8 WRENCH 7/16 WRENCH ½ WRENCH #2 PHILLIPS SCREWDRIVER 1/8 DRILL

More information

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life. Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional

More information

Nancy s Knit Knacks LLC 4 Yard Option Upgrade Kit Assembly Instructions and User Manual

Nancy s Knit Knacks LLC 4 Yard Option Upgrade Kit Assembly Instructions and User Manual Nancy s Knit Knacks LLC 4 Yard Option Upgrade Kit Assembly Instructions and User Manual Thank you for purchasing our 4 Yard Option (4YO) Upgrade Kit. To install this upgrade you are simply going to assemble

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Privacy Wall Glass Selections - Polished Edge Slider Door

Privacy Wall Glass Selections - Polished Edge Slider Door Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin

More information

Frameless Fixed Panel Slider

Frameless Fixed Panel Slider INSTALLATION INSTRUCTIONS Frameless Fixed Panel Slider QCI-5279 SINGLE ROLLER WITH ANTI-JUMP DOUBLE ROLLERS QCI5279 Rev Page Certified 08/09/6 Tools: To install your New Shower Enclosure, you may need

More information

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74 Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

Frameless Inline Door With Return QCI5263

Frameless Inline Door With Return QCI5263 INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges

More information

INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART

INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 HERITAGE F-150/250LD 2WD, 97-04, 04 HERITAGE 4WD WD EXPEDITION/ WD EXPEDITION PART INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting

More information

Mobile Weapons Storage System Specifications

Mobile Weapons Storage System Specifications Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security

More information

Shapeoko XXL Assembly Guide

Shapeoko XXL Assembly Guide Shapeoko XXL Assembly Guide 04/27/2016 XXL Packing LIst Item Qty Description Y-Carriage (left) 1 Y-Carriage (right) 1 X/Z Assembly 1 40 Rail 3 1 rail has mounting holes for controller Wasteboard Half 2

More information