PSI 9000 WR Series 3.3 kw o 15 kw High Efficiency Programmable DC Power Sources THE POWER TEST EXPERTS
PSI 9000 WR Series 3.3 kw o 15 kw Produc Overview The microprocessor conrolled high efficiency laboraory power supplies of series PSI 9000 WR 3U offer muliple funcions and feaures in heir sandard version. Userfriendly, ineracive menu navigaion makes he use of his equipmen remarkably easy and mos effecive. PSI 9000 WR 3U User and process profiles can be edied, saved and archived so ha he re-producibiliy of a es or oher applicaion is improved. In order o achieve even higher oupu power, cabines wih up o 180 kw and up o 42U size can be configured o sui he user s requiremens. C Inpu ll models are provided wih an acive Power Facor Correcion circui and are designed for use on indusrial hree-phase supplies wih 400 V or 480 VC raing. The effecive wide inpu range is defined as 360... 528 VC. uo-ranging power sage ll models are equipped wih a flexible auo-ranging oupu sage which provides a higher oupu volage a lower oupu curren, or a higher oupu curren a lower oupu volage, always limied o he max. nominal oupu power. The power se value is adjusable wih hese models. Therefore, a wide range of applicaions can already be covered by he use of jus one uni. DC Oupu DC oupu volages beween 0...60 V and 0...1500 V, oupu currens be-ween 0...20 and 0...510 and oupu power raings of 0...3.3 kw, 0...5 kw, 0...6.6 kw, 0...10 kw or 0...15 kw are available. The oupu erminal is locaed on he rear panel. 2
Feaured Benefis Wide range muli-phase inpu for 400/480 VC High efficiency up o 95.5% Oupu power raings: 3.3kW - 15kW, expandable up o 240 kw Oupu volages: 60 V up o 1500 V Oupu currens: 30 up o 510, expandable up o 5100 Flexible, power regulaed oupu sage Various proecion circuis (OVP, OCP, OPP, OTP) Inuiive TFT ouch panel wih display for values, saus and noificaions Inegraed rue funcion generaor Remoe sensing wih auomaic deecion Galvanically isolaed, analog inerface Inegraed rue funcion generaor Phoovolaic array simulaion Inernal resisance simulaion and regulaion 60 V models complian o SELV (EN 60950) Discharge circui (Uou < 60 V in s 10 s) USB por inegraed EMC TUV approved for EN 61010 Class B TOpional, digial inerface modules or alernaively insalled IEEE/GPIB por SCPI command language suppored Proecive Feaures For proecion of he equipmen conneced, i is possible o se an overvol-age proecion hreshold (OVP), as well as one for overcurren (OCP) and overpower (OPP). s soon as one of hese hresholds is reached for any reason, he DC oupu will be immediaely shu off and a saus signal will be generaed on he display and via he inerfaces. There is furhermore an overemperaure proecion, which will shu off he DC oupu if he device overheas. Discharge circui Models wih a nominal oupu volage of 200 V or higher include a dis-charge circui for he oupu capaciies. For no load or low load siuaions, i ensures ha he dangerous oupu volage can sink o under 60 V DC afer he DC oupu has been swiched off. This value is considered as limi for volages dangerous o human safey. 3
Remoe Sensing The sandard sensing inpu can be conneced direcly o he load in order o compensae volage drops along he power cables up o a cerain level. If he sensing inpu is conneced o he load, he power supply will adjus he oupu volage auomaically o make ensure he accurae required volage is available a he load. Display & Conrols Se values and acual values of oupu volage, oupu curren and oupu power are clearly represened on he graphic display. The color TFT screen is ouch sensiive and can be inuiively used o conrol all funcions of he device wih jus a finger. Se values of volage, curren, power or resisance (inernal resisance sim-ulaion) can be adjused using he roary knobs or enered direcly via a numeric pad. To preven uninenional operaions, all operaion conrols can be locked. nalog Inerface There is a galvanically isolaed analog inerface erminal, locaed on he rear of he device. I offers analog inpus o se volage, curren, power and resisance from 0...100% hrough conrol volages of 0 V...10 V or 0 V...5 V. To monior he oupu volage and curren, here are analog oupus wih 0 V...10 V or 0 V...5 V. lso, several inpus and oupus are available for conrolling and monioring he device saus. Display and Conrol Panel Knobs for comforable value adjusmen Display wih ouch panel USB por for loading and saving funcions 4
Funcion Generaor ll models wihin his series include a rue funcion generaor which can generae ypical funcions, as displayed in he figure below, and apply hem o eiher he oupu volage or he oupu curren. The generaor can be compleely configured and conrolled by using he ouch panel on he fron of he device, or by remoe conrol via one of he digial inerfaces. The predefined funcions offer all necessary parameers o he user, such as Y offse, ime / frequency or ampliude, for full configuraion abiliy. ddiionally o he sandard funcions, which are all based upon a so-called arbirary generaor, his base generaor is accessible for he creaion and execuion of complex ses of funcions, separaed ino up o 99 sequences. Those can be used for esing purposes in developmen and producion. The sequences can be loaded from and saved o a sandard USB flash drive via he USB por on he fron panel, making i easy o change beween differen es sequences. Offse mpliude mpliude Offse mpliude Offse mpliude Offse mpliude.sar.end U sar 1 2 3 4 5 1 f 2 1 1 2 2 3 4 1 1 2 Sequences Sine Triangle Recangle Trapezoid Ramp DIN 40839 The figure below shows a ficional example of a complex funcion of 40 se-quences, as i can be realised wih he arbirary generaor. The funcion can be creaed on he device or exernally and hen loaded or saved: There is furhermore a XY generaor, which is used o generae oher func-ions, such as UI or IU, which are defined by he user in form of ables (CSV file) and hen loaded from USB drive. For phoovolaics relaed ess, a PV curve can be generaed and used from user-adjusable key parameers. Even more characerisics can be insalled for user selecion by applying fuure firmware updaes. 5
Conrol Sofware Included wih he device is a conrol sofware for Windows PC, which allows for he remoe conrol of muliple idenical or even differen ypes of devices. I has a clear inerface for all se and acual values, a direc inpu mode for SCPI and ModBus RTU commands, a firmware updae feaure and he semi-auomaic able conrol named Sequencing. Maser-Slave ll models feaure a digial maser-slave bus by defaul. I can be used o connec up o 16 unis of idenical models in parallel operaion o a bigger sysem wih oals formaion of he acual value of volage, curren and power. The configuraion of he maser-slave sysem is eiher compleely done on he conrol panels of he unis or by remoe conrol via any of digial communicaion inerfaces. Handling of he maser uni is possibly by manual or remoe conrol (any inerface). 6
Opions Digial inerface modules for RS232, CNopen, Modbus TCP, Profibus, Profine/IO, Devicene or Eherne. The inerface slo is locaed on he rear panel (sandard models only), making i easy for he user o plug in a new inerface or o replace an exising one. The inerface will be auomaically deeced by he device and requires no or only lile configuraion. Three-way inerface (3W) wih a rigid GPIB por insalled insead of he defaul slo for rerofiable inerface modules. High Speed ramping* Waer Cooling ** High Speed Ramping increases volage slew raes by as much as 20x. Conac Inepro for deails. Rear connecors of he sandard models Rear connecors of models wih opion 3W * No available for all volages - please quoe for availabiliy ** Generally available for models up o 200 V, for oher models upon reques 7
Technical Daa Series PSI 9000 WR 3U Inpu C - Volage sandard 360...528 V, 2ph/3ph - Frequency 45...66 Hz - Power facor >0.99 Oupu volage DC - ccuracy <0.1% - Load regulaion 0-100% <0.05% - Line regulaion ±10% ΔUC <0.02% - Regulaion 10-100% load <2 ms - Overvolage proecion adjusable, 0...110% UNom - Slew Rae 10-90% Max. 30ms - No load discharge ime on DC off 100% U o <60 V: less han 10 s Oupu curren - ccuracy <0.2% - Load regulaion 0-100% ΔU DC <0.15% - Line regulaion ±10% ΔU C <0.05% Oupu power - ccuracy <1% Overvolage caegory 2 Proecion OT, OVP, OPP, PF, OCP (1 Isolaion - Inpu o enclosure 2500 V DC - Inpu o oupu 2500 V DC - Oupu o enclosure (PE) Depending on model, see ables Polluion degree 2 Proecion class 1 Display and panel Graphics display wih ouch panel Digial inerfaces - Buil-in 1x USB ype B for communicaion, 1x GPIB (opional wih opion 3W) - Slo 1x for rerofiable plug-in modules (sandard models only) nalog inerface buil-in, 15-pole D-Sub, female, galvanically isolaed - Inpu range 0...5 V or 0...10 V (swichable) - ccuracy U / I / P / R 0...10 V: <0.2% 0...5 V: <0.4% - Conrol Signals Remoe on-off, DC oupu on-off, resisance mode on-off - Saus Signals Overemperaure Series operaion Possible, bu depending on he isolaion of DC- agains PE Parallel operaion Yes, wih rue maser-slave, up o 10 unis Sandards Cooling EN 61326, IEC 1010, EN 61010 EMC TÜV approved according o IEC 61000-6-2:2005, IEC 61000-6-3:2006 Class B Fans (opional: waer) Operaion emperaure 0...50 C Sorage emperaure -20...70 C Relaive humidiy Operaion aliude Dimensions (W H D) (2 <80%, n.c. <2000 m 19 3 HE / 3U 609 mm (1 See page 13 (2 Enclosure only, no overall 8
Technical Daa PSI 9060-170 WR 3U PSI 9080-170 WR 3U PSI 9200-70 WR 3U PSI 9360-40 WR 3U Oupu volage DC 0...60 V 0...80 V 0...200 V 0...360 V - Ripple (1 <200 mvpp <16 mvrms <200 mvpp <16 mvrms <300 mvpp <40 mvrms <320 mvpp <55 mvrms -Sensing compensaion ~1 V ~2 V ~5 V ~7.5 V Insulaion - Negaive oupu <-> PE ±400 V DC ±400 V DC ±725 V DC ±725 V DC - Posive oupu <-> PE ±400 V DC ±400 V DC ±1000 V DC ±1000 V DC Oupu curren 0...170 0...170 0...70 0...40 - Ripple (1 <80 mrms <80 mrms <22 mrms <18 mrms Oupu power 0...3300 W 0...5000 W 0...5000 W 0...5000 W Efficiency ~93% ~93% ~95% ~93% Programming resoluion U <2 mv <4 mv <9 mv <15 mv Programming resoluion I <7 m <7 m <3 m <2 m Weigh (2 ~18 kg ~17 kg ~18 kg ~17 kg Technical Daa PSI 9500-30 WR 3U PSI 9750-20 WR 3U PSI 9060-340 WR 3U PSI 9060-510 WR 3U Oupu volage DC 0...500 V 0...750 V 0...60 V 0...40 V - Ripple (1 <350 mvpp <70 mvrms <800 mvpp <200 mvrms <320 mvpp <25 mvrms <320 mvpp <25 mvrms -Sensing compensaion ~10 V ~15 V ~1 V ~1 V Insulaion - Negaive oupu <-> PE ±1000 V DC ±1000 V DC ±400 V DC ±400 V DC - Posive oupu <-> PE ±1800 V DC ±1800 V DC ±400 V DC ±400 V DC Oupu curren 0...30 0...20 0...340 0...510 - Ripple (1 <16 mrms <16 mrms <160 mrms <120 mrms Oupu power 0...5000 W 0...5000 W 0...6600 W 0...10000 W Efficiency ~95.5% ~94% ~93% ~93% Programming resoluion U <21 mv <31 mv <2 mv <2 mv Programming resoluion I <2 m <1 m <14 m <21 m Weigh (2 ~18 kg ~18 kg ~25 kg ~32 kg Technical Daa PSI 9080-340 WR 3U PSI 9200-140 WR 3U PSI 9360-80 WR 3U PSI 9500-60 3U Oupu volage DC 0...80 V 0...200 V 0...360 V 0...500 V - Ripple (1 <320 mvpp <25 mvrms <300 mvpp <40 mvrms <320 mvpp <55 mvrms <350 mvpp <70 mvrms -Sensing compensaion ~ 2 V ~ 5 V ~ 7.5 V ~ 10 V Insulaion - Negaive oupu <-> PE ±400 V DC ±725 V DC ±725 V DC ±1000 V DC - Posive oupu <-> PE ±400 V DC ±1000 V DC ±1000 V DC ±1800 V DC Oupu curren 0...340 0...140 0...80 0...60 - Ripple (1 <160 mrms <44 mrms <35 mrms <32 mrms Oupu power 0...10000 W 0...10000 W 0...10000 W 0...10000 W Efficiency ~93% ~95% ~93% ~95% Programming resoluion U <4 mv <9 mv <15 mv <21 mv Programming resoluion I <14 m <6 m <4 m <3 m Weigh (2 ~25 kg ~25 kg ~25 kg ~25 kg (1 RMS value: measures a LF wih BWL 300 khz, PP value: measured a HF wih BWL 20MHz (2 Weigh of sandard version, models wih opions may vary (3 ricle number of he sandard version, models wih opion 3W insalled have differen aricle numbers 9
Technical Daa PSI 9750-40 WR 3U PSI 91000-30 WR 3U PSI 9080-510 WR 3U PSI 9200-210 WR 3U Oupu volage DC 0...750 V 0...1000 V 0...80 V 0...200 V - Ripple (1 <800 mvpp <200 mvrms <1600 mvpp <350 mvrms <320 mvpp <25 mvrms <300 mvpp <40 mvrms -Sensing compensaion ~15 V ~20 V ~2.5 V ~6 V Insulaion - Negaive oupu <-> PE ±1000 V DC ±1000 V DC ±400 V DC ±725 V DC - Posive oupu <-> PE ±1800 V DC ±1800 V DC ±400 V DC ±1000 V DC Oupu curren 0...40 0...30 0...510 0...210 - Ripple (1 <32 mrms <22 mrms <240 mrms <66 mrms Oupu power 0...10000 W 0...10000 W 0...15000 W 0...15000 W Efficiency ~94% ~95% ~93% ~95% Programming resoluion U <31 mv <41 mv <4 mv <9 mv Programming resoluion I <2 m <2 m <21 m <9 m Weigh (2 ~25 kg ~25 kg ~32 kg ~32 kg Technical Daa PSI 9360-120 WR 3U PSI 9500-90 WR 3U PSI 9750-60 WR 3U PSI 91000-40 WR 3U PSI 91500-30 3U Oupu volage DC 0...360 V 0...500 V 0...750 V 0...1000 V 0...1500 V - Ripple (1 <320 mvpp <55 mvrms <350 mvpp <70 mvrms <800 mvpp <200 mvrms <2200 mvpp <310 mvrms <2400 mvpp <400 mvrms -Sensing compensaion ~7.5 V ~10 V ~15 V ~20 V ~30 V Isolaion - Negaive oupu <-> PE ±725 V DC ±1000 V DC ±1000 V DC ±1000 V DC ±1000 V DC - Posive oupu <-> PE ±1000 V DC ±1800 V DC ±1800 V DC ±1800 V DC ±1800 V DC Oupu curren 0...120 0...90 0...60 0...40 0...30 - Ripple (1 <50 mrms <48 mrms <48 mrms <22 mrms <26 mrms Oupu power 0...15000 W 0...15000 W 0...15000 W 0...15000 W 0...15000 W Efficiency ~93% ~95% ~94% ~95% ~95% Programming resoluion U <15 mv <21 mv <31 mv <41 mv <61 mv Programming resoluion I <5 m <4 m <3 m <2 m <2 m Weigh (2 ~32 kg ~32 kg ~32 kg ~32 kg ~32 kg (1 RMS value: measures a LF wih BWL 300 khz, PP value: measured a HF wih BWL 20MHz (2 Weigh of sandard version, models wih opions may vary 10
USB and analog inerface Slo for digial inerfaces Terminals for Share Bus & Sensing DC oupu Connecors for Maser-Slave Rear view of base model Rear view wih opion 3W 2018 Inepro Sysems, LP. Specificaions subjec o change wihou noice. PSI 9000 WR 3U Series 3.3 kw o 150 kw High Performance Programmable DC Power Sources 11
12
Conac Us Unied Saes Inepro Sysems merica, LP 14712- Franklin ve Tusin, C 92780 Tel: 1 714 953 2686 sales@ineproae.com www.ineproae.com Unied Kingdom Inepro UK Ld. 9 Lakeside Business Park Swan Lane, Sandhurs Berkshire GU47 9DN / UK Tel: 44 012 5287 5600 China Inepro Power Elecronics (Shenzhen) Co., Ld No. 828, Block 7, Fourh Indusrial rea Nanyou, Nashan Disric Shenzhen, China 518052 Tel: 0086 755 86500020 13