DVNCED NEW INFORMTION Green. SURFCE MOUNT FST RECOVERY RECTIFIER Product Summary (@T = +25 C) V RRM (V) I O () V F Max (V) I R Max (μ),.3 5 Description and pplications Features and Benefits Glass Passivated Die Construction Fast Recovery Time for High Efficiency Surge Overload Rating to 3 Peak High Current Capability Low Profile Design, Package Height Less than.mm Lead-Free Finish; RoHS Compliant (Notes & 2) Halogen and ntimony Free. Green Device (Note 3) Qualified to EC-Q Standards for High Reliability PPP Capable (Note 4) Mechanical Data The is a rectifier packaged in the low profile D-FLT package. Providing fast recovery time for high efficiency, this device is ideal for use in general applications such as: Reverse Protection Switching Blocking Case: D-FLT Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V- Moisture Sensitivity: Level per J-STD-2 Terminals: Finish Matte Tin nnealed over Copper Leadframe. Solderable per MIL-STD-22, Method 28 Polarity: Cathode Band Weight:.35 grams (pproximate) D-FLT Top View Ordering Information (Note 5) Part Number Compliance Case Packaging -3 utomotive D-FLT,/Tape & Reel. EU Directive 22/95/EC (RoHS) & 2/65/EU (RoHS 2) compliant. ll applicable RoHS exemptions applied. 2. See http:///quality/lead_free.html for more information about Diodes Incorporated s definitions of Halogen- and ntimony-free, "Green" and Lead-free. 3. Halogen- and ntimony-free "Green products are defined as those which contain <9ppm bromine, <9ppm chlorine (<5ppm total Br + Cl) and <ppm antimony compounds. 4. utomotive products are EC-Q qualified and are PPP capable. Refer to http:///product_compliance_definitions.html. 5. For packaging details, go to our website at http:///products/packages.html. Marking Information D-FLT RM = Product Type Marking Code = Manufacturers Code Marking YWW = Date Code Marking Y = Last Digit of Year (ex: 6 for 26) WW = Week Code ( to 53) B = Foundry and ssembly Code of 5
I F, DC FORWRD CURRENT () I F, INSTNTNEOUS FORWRD CURRENT () DVNCED NEW INFORMTION Maximum Ratings (@T = +25 C, unless otherwise specified.) Single phase, half wave, 6Hz, resistive or inductive load. For capacitive load, derate current by 2%. Characteristic Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 6) V RRM V RWM V R, V RMS Reverse Voltage V R(RMS) 7 V verage Rectified Output Current @ T = + C I O. Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load I FSM 3 Thermal Characteristics Characteristic Symbol Value Unit Typical Thermal Resistance, Junction to Terminal (Note 7) R θjt 3 C/W Typical Thermal Resistance, Junction to ir (Note 7) R θj 83 C/W Operating and Storage Temperature Range T J, T STG -55 to +5 C Electrical Characteristics (@T = +25 C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Test Condition Reverse Breakdown Voltage (Note 8) V (BR)R, V I R = µ Forward Voltage Drop V F Leakage Current (Note 8) I R.95.83 Reverse Recovery Time t RR 4 5 ns 6. Device mounted on FR-4 substrate, " x ", 2oz, single-sided, PC boards with." x.5" copper pads. 7. Device mounted on FR-4 substrate,.4" x.5", 2oz, single-sided, PC boards with.2" x.25" copper pads. 8. Short duration pulse test used to minimize self-heating effect..2 5.3 5 V µ I F =, T J = +25 C I F =, T J = +25 C V R =,V, T J = +25 C V R =,V, T J = +25 C I F =.5, I R =., I RR =.25 Total Capacitance C T 5 pf V R = 4.V DC, f = MHz 2.8.6.4.2 Note 7 T = 85 C T = C T = 25 C.8 T = 25 C.6 T = 5 C T = -55 C.4 Note 6..2 25 5 75 25 5 T, MBIENT TEMPERTURE ( C) Figure DC Forward Current Derating..4.6.8..2.4 V, INSTNTNEOUS FORWRD VOLTGE (V) F Figure 2 Typical InstantanousForward Voltage 2 of 5
C T, TOTL CPCITNCE (pf) PF (V), VERGE FORWRD POWER DISSIPTION (W) DVNCED NEW INFORMTION I R, REVERSE LEKGE CURRENT (µ) I FSM, PEK FORWRD SURGE CURRENT () 3 Single Half-Sine-Wave T = 5 C T = 25 C T = C 2. T = 85 C T = 25 C T = 5 C J.. T = -55 C. 2 3 4 5 6 7 8 9 V R, INSTNTNEOUS REVERSE VOLTGE (V) Figure 3 Typical Instantaneous Reverse Characteristics 5 NUMBER OF CYCLES T 6Hz Figure Fig. 4 Forward Surge Current Derating Curve.8 f = MHz.6 T = 5 C j 4.4.2 3 2.8.6.4.2. V R, DC REVERSE VOLTGE (V) Figure 5 Total Capacitance vs. Reverse Voltage +.5.5.5 2 IF (V), VERGE FORWRD CURRENT () Figure 6 Forward Power Dissipation t rr RR (+) (-) 5V DC pprox Device Under Test (-) Pulse Generator (Note ) 9) -.25 Oscilloscope (Note 8) (Note 9) (+) -. Set time base for 5/ ns/cm 9. Rise Time = 7.ns max. Input Impedance =.MΩ, 22pF.. Rise Time = ns max. Input Impedance = 5Ω. Figure 7 Reverse Recovery Time Characteristic and Test Circuit 3 of 5
DVNCED NEW INFORMTION Package Outline Dimensions Please see http:///package-outlines.html for the latest version. D-FLT D H E E c b L k D-FLT Dim Min Max.9. b.25.65 c..4 D 2.25 2.95 E 3.95 4.6 k 2.8 - H E 5. 5.6 L.5.3 ll Dimensions in mm Suggested Pad Layout Please see http:///package-outlines.html for the latest version. D-FLT Y X X G Value Dimensions (in mm) C 4.65 G 2.8 X.85 X 6.5 Y.7 C 4 of 5
DVNCED NEW INFORMTION IMPORTNT NOTICE DIODES INCORPORTED MKES NO WRRNTY OF NY KIND, EXPRESS OR IMPLIED, WITH REGRDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WRRNTIES OF MERCHNTBILITY ND FITNESS FOR PRTICULR PURPOSE (ND THEIR EQUIVLENTS UNDER THE LWS OF NY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. ny Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. s used herein:. Life support devices or systems are devices or systems which:. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright 26, Diodes Incorporated 5 of 5