New Jigs to Close Space Nurlock Adapter Tips, Liners, Locating Lock Screws and TLC Clamps

Size: px

Start display at page:

Download "New Jigs to Close Space Nurlock Adapter Tips, Liners, Locating Lock Screws and TLC Clamps"

Jasmin Fields
5 years ago
Views:

New Jigs to Close Space Nurlock dapter Tips, Liners, Locating Lock Screws and TLC Clamps New Universal Locating and Spacing Fixtures, Nurlock Shanks, Collars, Lock Screws and TLC Clamps.

Select Locating Shanks and dapters (LS) that match your shank O.D.'s. 2. Select the Locating Jig that matches your Nurlock dapter Tip Collar Series.

into the I.D. of your fixture hole or liner. lign to your drill line. Clamp, drill and tap thru jig bushing for correct spacing and lock screw or TLC location. LJ-21000 LJ-22000 "F".

1 New Jigs to Close Space Nurlock dapter Tips, Liners, Locating Lock Screws and TLC Clamps New Universal Locating and Spacing Fixtures, Nurlock Shanks, Collars, Lock Screws and TLC Clamps. Spacing and location of lock screws and TLC clamps is achieved instantly! THREE SIMPLE STEPS: REF UTK UTK-LJU-44 MSTER JIG KIT 44 COMPONENTS 1. Select Locating Shanks and dapters (LS) that match your shank O.D.'s. 2. Select the Locating Jig that matches your Nurlock dapter Tip Collar Series. ttach the Locating Shank dapter to the Locating Jig with the 5/16-18 UNC Socket Head Screw. Your Jig is now complete! 3. Insert the Jig with the Locating Shank dapter O.D. into the I.D. of your fixture hole or liner. lign to your drill line. Clamp, drill and tap thru jig bushing for correct spacing and lock screw or TLC location. LJ LJ "F".2570 LL USHINGS REF STYLE I LJ LJ LJ UTK-LJU LJU-44 JIG KIT UNIVERSL LOCTING JIG 5/16 USHINGS 120 NGLE TYP. STYLE II LJ Rib-I Stacker Case UTK-LJU-44 KIT CONTINS LL 44 COMPONENTS ON THIS PGE: SHNKS, DPTERS, USHINGS, JIGS, SCREWS & CUSTOM CSE. UTK-LJ-8 JIG KIT 8 COMPONENTS KIT 2 ILLUSTRTION FOR LL JIGS.50 Locating Shank dapter UD-LJ-8 KIT CONTINS LL 7 JIGS SHOWN THIS PGE IN CUSTOM-FITTED CSE WITH TOP & OTTOM LYOUT INSERTS. PRT NO. DIM STYLE LOCKSCREW TLC CLMP NO. PRT NO. DIM STYLE LOCKSCREW TLC CLMP NO. PRT NO. DIM LJ I TLC 2 LJ I TLC 2 LJ I TLC 2 LJ I TLC 2 STYLE 5/16-18 HEX LOCK SCREW INCLUDED LOCKSCREW TLC CLMP NO. LJ II TLC 3 LJ II TLC 3 PRT NO. DI. PRT NO. DI. LS LS LS LS LS LS LS LS LS LS LS LS LS LS LS LS LS LS /16-18-UNC SOCKET HED SET SCREWS INCLUDED. KIT 3 DPTER SHNKS DETILS FOR LL STYLES OF LOCTING JIGS UTK-LS-37 KIT 37 COMPONENTS SPECIFY LS-37 FOR KIT CONTENTS: LL 18 LOCTING SHNK DPTERS, LS-1 THRU LS-18, ND LL 18 OF THE 5/16-18 UNC SOCKET HED SCREWS IN CSE. LOCTING SHNK DPTER STYLE III UTK-ULJK-38 JIG KIT 38 COMPONENTS ULJ-1 JIG 1 COMPONENT SCRIED NUMERS COLLR SERIES CONTENTS: LL 18 LOCTING SHNK DPTERS: LS-1 THRU LS-18, LL 5/16-18 UNC SOCKET HED SCREWS ND THE LJU-1 UNIVERSL LOCTING JIG, IN CSE. CONTINS LL LOCKING SERIES SIZES. LOCTING NUMERS DENOTE LOCKING SERIES. KIT DI. Socket Head Screw Locating Shank dapter UNIVERSL LOCTING JIG LOCKING COLLR SIZES SCRIED TO LOCTE LL LOCK SCREWS OR TLC CLMPS, THRU LOCTING SHNK DPTER WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / FX (562) /(800) P39

Liners, Lock Screws, Spindle Guards Liners, Lock Screws & Fluid Swivel Guides HEDLESS LINERS LINER PRT

19943 13/16 1-3/8 1-3/8 19944 7/8 1-3/8 1-3/8 19945 1 1-3/8 1-3/8 19946 1-1/8 1-3/4 1-3/4 LINER PRT

C LENGTH 7/8 1-3/4 1" 1-3/4 1-3/8 1-3/4 19951 1 1-3/8 1-3/4 19952 1-1/4 1-3/4 1-3/4 19953 1-1/4 1-3/4

2-1/4 2-3/4 2-1/2 LOCK SCREWS LOCK SCREW INSTLLTION DT SLOTTED HET TRETED LCK OXIDE FINISH LOCK SCREW

16530 7/16 16531 3/8 16532 3/8 C THRED 3/4 5/8 3/8-16 5/8 5/16 5/16-18 5/8 7/16 5/16-18 Use Locating

2 Liners, Lock Screws, Spindle Guards Liners, Lock Screws & Fluid Swivel Guides HEDLESS LINERS LINER PRT NO. I.D / / /2 O.D. 5/8 1" 3/4 1" 3/4 1" /16 7/8 1" /8 7/8 1" /4 1" 1" C LENGTH /4 1" 1-3/ /16 1-3/8 1-3/ /8 1-3/8 1-3/ /8 1-3/ /8 1-3/4 1-3/4 LINER PRT NO. I.D / / /8 O.D. C LENGTH 7/8 1-3/4 1" 1-3/4 1-3/8 1-3/ /8 1-3/ /4 1-3/4 1-3/ /4 1-3/4 2-1/ /8 1-3/4 2-1/ /2 2-1/4 2-1/ /4 2-1/4 2-1/ /2 2-1/ /4 2-3/4 2-1/2 LOCK SCREWS LOCK SCREW INSTLLTION DT SLOTTED HET TRETED LCK OXIDE FINISH LOCK SCREW PRT NO / / /8 C THRED 3/4 5/8 3/8-16 5/8 5/16 5/ /8 7/16 5/16-18 Use Locating Jigs on Page P39. DPTER TIP SERIES LOCK SCREW PRT NO NO. OF SCREWS REQUIRED SPINDLE GURD FOR FLUID SWIVEL GUIDES PROTECTION FOR SPINDLES COOLNT LINES IR FLUID CHUCKS FITS QUCKENUSH, ROCKWELL ND COOPER RIGHT NGLE MOTORS. SE PRT NO. L HEIGHT UD UD /8 UD /4 P40 We elieve Quality Means the Same to You s It Does to

dapters for Small Holes for Fiberglass and Plastic Tooling requiring use of

dapter Tips fit all standard automatic feed drill motors, including

close tolerance is maintained when drilling rivet holes in titanium,

NOTE: dapter Tips (T) and Lock Liner (LL) ushings listed are not

"T" dapter Tips will only fit the "LL" Lock Liners shown on this page.

3/4-16 LH UNF 2 DPTER TIPS CONFORMS TO ST-7021 2 PIECE CONSTRUCTION T SERIES

0010 PRESS FIT = LL-P RETINING SUPPORT RING SECURES LL and T FROM EPOXY.

3 dapters for Small Holes for Fiberglass and Plastic Tooling requiring use of automatic feed drill motors dapter Tips T -LL INCLUSIVE FETURE FITS LL s dapter Tips fit all standard automatic feed drill motors, including Gardner-Denver, Keller, ro, uckeye, Quackenbush, Zephyr, etc. close tolerance is maintained when drilling rivet holes in titanium, stainless steel, nickel and other hard metals. NOTE: dapter Tips (T) and Lock Liner (LL) ushings listed are not interchangeable with s Nurlock drill bushing tips and liners. "T" dapter Tips will only fit the "LL" Lock Liners shown on this page. NOTHER EXCLUSIVE s dapter Tips now feature two piece construction and longer lengths. The shank is hardened for wear protection and the collar for toughness. 3/4-16 LH UNF 2 DPTER TIPS CONFORMS TO ST PIECE CONSTRUCTION T SERIES LOCK LINER USHINGS NEW LENGTH LINERS SUPPORT RING PRESS FIT = LL-P RETINING SUPPORT RING SECURES LL and T FROM EPOXY. KNURLED = LL CONFORMS TO UT-7003 DPTER TIPS LOCK LINERS RETINING RING LL-36-R UT LL-44-R UT LL-52-R UT LL-64-R UT WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / FX (562) /(800) P41

Helical Nurlock Liner Fixtures Helical Nurlock Liner Ideal For Drill ar Fixtures Solid, djustable or Swivel Types P42 UCC-268002-192 and -193 SERIES SOLID DJUSTLE DRILL RS Durable, precision-designed

Nurlock Liners are black oxide finished. Clearly visible stamped Part No. and Series. UCC-268002-193-23 UCC-268002-193-24 21000 and 22000 Series are 1.4'' High x 1.

4 Helical Nurlock Liner Fixtures Helical Nurlock Liner Ideal For Drill ar Fixtures Solid, djustable or Swivel Types P42 UCC and -193 SERIES SOLID DJUSTLE DRILL RS Durable, precision-designed to hold Positive Feed Drill Motors with Nurlock dapter Tips, Collars and Shanks (See page P10). ttractive hard anodized blue finish and alloy steel heat treated. Nurlock Liners are black oxide finished. Clearly visible stamped Part No. and Series. UCC UCC and Series are 1.4'' High x 1.6'' Wide x 11'' Long with 1/4'' Chip Relief depth and Series are 1.4" High x 2.1" Wide x 11" Long with 1/4" Chip Relief depth. Special Series available on request. UCC and -196 DRILL R SERIES 1/4'' Chip Relief Depth 9" Long x 2.1" Wide x 1.4" High 9'' Long x 1.6" Wide x 1.4" High Universal djustable Drill ars to work for Positive Feed Drill Motors with Nurlock dapter Tips, Collars and Shanks (See page P10). Designed with Twin Revolving ushings for Fasteners, Clamping or Support Guides. Guide Holes are 1/8, 5/32, 3/16 and 1/4 with Counter-bore Relief. ttractive hard anodized blue finish and alloy steel heat treated. Nurlock Liners are black oxide finished. Clearly visible stamped Part No. and Series. UCC UCC UCC UCC /4'' Chip Relief Depth 11" Long x 3" Wide x 1.4" High UCC UCC " Long x 2-3/8" Wide x 1.4" High and Series are 1.4'' High x 2-3/8'' Wide x 11'' Long with 1/4'' Chip Relief depth and Series are 1.4'' High x 3'' Wide x 11'' Long with 1/4'' Chip Relief depth. Special Series available on request. UCC / -193 DRILL RS PRT NO. -LOCK FITS COLLR & SHNK UCC / -196 DRILL RS PRT NO. -LOCK FITS COLLR & SHNK We elieve Quality Means the Same to You s It Does to. SHNK OD UCC XXX 3/8 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 9/16 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 1-1/4 UCC XXX 1-3/8 UCC XXX 1-1/2 SHNK OD UCC XXX 3/8 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 9/16 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 1-1/4 UCC XXX 1-3/8 UCC XXX 1-1/

Swivel-djustable-Universal Fixtures with Helical Nurlock Liners Swivel djustable Helical Nurlock Liners UCC-268002-201 / -202 DRILL RS PRT NO.

UCC-268002-201-223 223XXX 9/16 UCC-268002-201-224 224XXX 5/8 UCC-268002-201-225 225XXX 3/4 UCC-268002-202-231 231XXX 3/4 UCC-268002-202-232 232XXX 13/16 UCC-268002-202-233 233XXX 7/8

5 Swivel-djustable-Universal Fixtures with Helical Nurlock Liners Swivel djustable Helical Nurlock Liners UCC / -202 DRILL RS PRT NO. -LOCK FITS COLLR & SHNK SHNK OD UCC XXX 3/8 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 9/16 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 1-1/4 UCC XXX 1-3/8 UCC XXX 1-1/2 Universal djustable Swivel Fixture Features High strength Swivels in all directions djustments can be made for alignment location clamping 3/8" chip clearance below Helical Nurlock Liner Use on irregular surfaces, corners and difficult locations Control perpendicularity ll alloy heat treated steel fixture Simply locate with pin or Nurlock shank lign Lock up swivel Clamp to work piece Insert appropriate Nurlock dapter tip, collars and shanks Drill Ream Counterbore Countersink. UCC Series 10" to 12" Long x 4" Wide x 1-34" High vailable in Collars and Shank Series Nurlock dapter Tips. Fixtures are manufactured to close tolerances with strong heat treated black oxide finish and clear identification on each drill bar. Will hold Positive Feed Motors. Kits are available with fixtures and swivels for each size Nurlock Collar and dapter Tip Series are available on special request. UCC / -199 DRILL RS PRT NO. -LOCK FITS COLLR & SHNK SHNK OD UCC XXX 3/8 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 7/16 UCC XXX 1/2 UCC XXX 9/16 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 5/8 UCC XXX 3/4 UCC XXX 13/16 UCC XXX 7/8 UCC XXX 1 UCC XXX 1-1/8 UCC XXX 1-1/4 UCC XXX 1-3/8 UCC XXX 1-1/2 Universal djustable Swivel Fixture Features Swivels in all directions Location, lignment, Clamping and ngular djustments Excellent for contoured or irregular surfaces djustable for alignment or clamping from both ends 3/8" chip clearance below Helical Nurlock Liner ttractive aluminum blue hard anodized finish and alloy steel Swivel lack oxide Liners and Clamps djust height and width by leveling screw pads in four locations djust 1-7/8'' to 3-3/8'' Clamp and adjust vertically and horizontally Swivels Expand aseup to three inches Drill Ream Countersink Counterbore. UCC Series Chip Clearance 3/8 13-1/2" Long closed djusts to 16-1/2" Long x 6" Wide x 1-7/8" High Will hold, align and lock in Nurlock Collars and Shank Series with I.D. ranges from 3/32" to 1-1/2". See page T14. Fixtures are manufactured to close tolerances with clear identification on each drill bar. vailable in luminum or Steel. Kits are available with fixtures and swivels for each size Nurlock Collar and dapter Tip. Kits with all sizes of slipfit sleeves to align all Nurlock Shank O.D. sizes to Nurlock Liners can also be provided. Call or Fax for further details WOODRUFF VE. DOWNEY, C TELEPHONE (562) / (800) IN C / FX (562) /(800) P43

Nurlock Liners in Retrofit Kits Helical Nurlock Liners in Retrofit- Mod-Repair &.O.G. Custom Kits Rib-I Stacker Case Tool Kit Drill Stand MIT Spar Fitting Tool Design by L. Ledoux, oeing.

This Kit was designed by Senior Tool Engineer Lenny Ledoux, oeing Everette, and manufactured for their 757 customer rework.

6 Nurlock Liners in Retrofit Kits Helical Nurlock Liners in Retrofit- Mod-Repair &.O.G. Custom Kits Rib-I Stacker Case Tool Kit Drill Stand MIT Spar Fitting Tool Design by L. Ledoux, oeing. Layout by Don edell, United. UTK KIT Modification, Retrofit Repair and.o.g. Kits are manufactured with speed and alacrity for our preferred customer requirements. This Kit was designed by Senior Tool Engineer Lenny Ledoux, oeing Everette, and manufactured for their 757 customer rework. Coolant Oil Hole Threaded Shank Reamers Rib-I Case UCC is 22" L x 18" W x 6-1/2" H This handsome Navy lue Rib-I Stacker Case contains Lasting Latch and Heavy Duty Hardware, including self-retracting rubber grip handles and quarter-turn pressurized latch clamps. With quantity order and reasonable lead time, will provide your company logo molded in the case. large detailed metal contents tag is mounted inside the lid listing each tool with Part No. and location. Inside hard foam is light blue hard foam for ease of part location. Kit Contents 12 UD /32 thru 37/64 Nurlock dapter Tips 6 UD /32 thru 3-3/64 Nurlock dapter Tips 40 UD-HNLP-1 Single Ear Helical Nurlock Liners 2 UCC /32 and 7/32 Custom Threaded Shanks 2 UCC /2, 17/32, 9/16 & 37/64 Custom Piloted Oil Hole Threaded Shank Reamers DPTILITY KITS Positive Feed ir Tools, Nosepieces, dapters, Chucks and ccessories are kitted separately for use with those tools. CUSTOM COMINTION KITS can supply you with a custom combination kit with tools for your particular needs. Engineer, experienced in Retrofit - Modification - Repair and.o.g. Kit Design, is available to assist in selecting the correct tools, design layout, application data and case. We will provide your requirements at reasonable cost and will guide you in any special kit conditions you require. Call or Fax us for further details. Just in time! Call You'll be glad you did! P44 We elieve Quality Means the Same to You s It Does to

UNITED s New Bucking Bars

UNITED s New Bucking Bars ucking ars FETURES: UNITED carefully manufactures Quality First ucking ars On Time. UNITED s New ucking ars Maximum strength ars Superior design and wear under the most severe conditions Cast ars manufactured