Technical Guide TG-19-C-017-E E. Made by: pelrom Date: Modifications: see last page CALIBRE 3313
|
|
- Thomas Bradford
- 5 years ago
- Views:
Transcription
1 Technical Guide TG-19-C-017-E E Made by: pelrom Date: Modifications: see last page CALIBRE 3313 A B C 12 Ø 27 mm Height on movement Power reserve Number of jewels Frequency I II III U 6.85 mm 52 h / 37 4 Hz ( A/h) Automatic movement, exclusive Omega chronograph, date, COSC certified, Co-Axial escapement. Chronograph system with column-wheel. 30-min. minute counter and 12-h hour counter + small second hand at 9 o clock. Omega balance system without index. /1
2 Contents Page Calibre General information for calibre For the following informations, see basic Technical Guide For the following informations, see document «General information for Calibres 3200, 3201, 3202, 3203, 3205, 3301, 3303, 3313 and 3603» 3 Differences between the versions for calibre Differences between the versions 4 Exploded views for calibre Assembling of escapement 1 5 Assembling of escapement 2 6 Spare parts list for calibre Spare parts list 7 Spare parts list 8 Spare parts list 9 Spare parts list 10 Spare parts list 11 Spare parts list 12 Modifications of Technical Guide versions for Calibre /2
3 General information for calibre 3313 For the following informations, see basic Technical Guide 3303: - Order to assembly basic calibre - Lubrication - Hand fitting heights For the following informations, see document «General information for Calibres 3200, 3201, 3202, 3203, 3205, 3301, 3303, 3313 and 3603»: - Date information - Complete balance bridge and chronograph bridge - Major points - Instantaneous rate - Special lubrication - Lubricants - Cleaning and epilame-coated procedure - Components not requiring epilam coating - Tightening and untightening torque according to screwthread size - For more informations, please consult respectives Technical Guides - Technical modifications on version «A» - Technical modifications on version «A» and «B» - Technical modifications on version «C» - Co-Axial Kit with 3 levels - Customer Service lubrication of stud for crown wheel (31.023) and the 3 intermediate driving wheels for ratchet wheel (32.083) - Runners for hand setting and hand setting force - Hand fitting height - Epilame coating - Mandatory tools - List of programs of apparatus - Checks of endshake - Description of chronograph system for Co-Axial escapement - Functioning system of movement - Chronograph setting - Co-Axial escapement and balance bridge installation - Instantaneous rate /3
4 Differences between the versions, and Main plate (4 Hz) (4 Hz) (4Hz) Chronograph bridge, complete ref Pivoting in the tube of center on rubies Ø Hole for dial fastener: 0.80 mm ref Pivoting in the tube of center on rubies Ø Hole for dial fastener: 1.00 mm ref Pivoting in the tube of center on bush Ø Hole for dial fastener: 1.00 mm Co-Axial wheel in Liga Engraved 37 jewels ref Engraved 37 jewels ref Engraved 36 jewels ref Intermediate escape wheel Balance bridge ref B30040 ref C30040 ref ref ref ref Pallet fork Balance Shock-absorber, upper Shock-absorber, lower In settings, upper In settings, lower ref ref B40010 ref Cylindrical pivots Ø 0.08 mm Jewel hole Ø 0.09 mm ref Gold-plated ref Jewel hole Ø 0.09 mm Nickel-plated ref A32127 Jewel hole Ø 0.09 mm ref A32167 Jewel hole Ø 0.09 mm ref ref C40010 ref Conical pivots Ø 0.07 mm Jewel hole Ø 0.08 mm ref Gold-plated ref Jewel hole Ø 0.08 mm Gold-plated ref Jewel hole Ø 0.08 mm ref Jewel hole Ø 0.08 mm /4
5 Exploded views for calibre Assembling of escapement1 1.0 Parts for assembling Movement holder Intermediate escape wheel Escapement wheel Pallet fork 1 2 Ref Ref Ref Ref Order to assembly! Co-Axial wheel lubrication: Please refer to Working Instruction No Order to assembly 2! 1 /5
6 Exploded views for calibre Assembling of escapement Parts for assembling Movement holder Pallet bridge, Co-Axial Screw for pallet bridge blue Balance bridge, pre-assembled Screw for balance bridge, pre-assembled Ref Ref. 8204B Ref Ref. 7031B Ref Pre-lubrication Moebius SYNT HP-1300 Sans Colorant Moebius SYNT-A-LUBE 9010! In settings lubrication: Escapement lubrication: Please refer to Working Instruction No Order to assembly! 2 1! 3 See document General Informations for Calibre 3303, 3313 and family page 9 4 /6
7 Spare parts list for calibre 3313 Main plate, pre-assembled Chronograph bridge Barrel bridge, preassembled Barrel, complete Wheel train bridge, pre-assembled Barrel drum + barrel cover Pallet bridge, Co-Axial Barrel arbor Balance bridge, pre-assembled Slipping mainspring X Hammer operating lever limitation bridge Automatic device framework, jewelled Automatic device bridge, pre-assembled Date indicator maintaining plate Oscillating weight, rhodium-plated Intermediate wheel Great wheel Third wheel /7
8 Spare parts list for calibre 3313 Second wheel Reduction wheel Intermediate escape wheel ** S2 Shock-absorber, upper Co-Axial wheel in Liga Shock-absorber, lower B C Ratchet wheel In settings, upper A Crown wheel In settings, lower A Minute wheel Cap jewel for balance, lower S A32262 Hour wheel Cap jewel for balance, upper ** A32325 Cannon pinion with driving wheel Shock-absorber spring, top ** A32425 Motion work setting wheel Shock-absorber spring, bottom A32462 Winding pinion Ratchet wheel driving wheel Sliding pinion Wig-wag pinion /8
9 Spare parts list for calibre 3313 Stop pinion Hour counter additional driving wheel Intermediate date wheel Pallet fork B C40010 Date indicator driving wheel Balance complete with stud Date corrector intermediate setting wheel 1 Stud support Date corrector intermediate setting wheel 2 Winding stem* Chronograph wheel Yoke ** Minute-counting wheel Rocking bar ** Hour-counting wheel Setting lever ** Driving wheel for counters Setting lever jumper Hour counter additional driving wheel 1 Click * Only working winding stem! For the correct reference, use the Extranet with the reference of the watch. /9
10 Spare parts list for calibre 3313 Stop click Hour hammer Date jumper Eccentric screw Date corrector Balance stop lever Column wheel operating lever Click spring Hammer operating lever Yoke spring A Clutch rocker Stop click spring Clutch lever Date jumper spring Column wheel jumper Column wheel operating lever spring Sautoir de compteur minutes Hammer operating lever spring Minute counter jumper Hour wheel friction spring Chronograph column-wheel Dial fastener /10
11 Spare parts list for calibre 3313 Crown wheel core Screw for hammer operating lever spring A6012 Date indicator Screw for ratchet wheel * Screw for stud Screw for automatic device bridge Screw for hammer operating lever Screw for column wheel operating lever Screw for hammer operating limitation bridge Screw for column wheel operating lever Screw for clutch rocker Screw for crown boss Screw for clutch lever Screw for date indicator maintaining plate Screw for column wheel jumper Screw for setting lever jumper Screw for minute counter jumper Screw for click /11
12 Spare parts list for calibre 3313 Screw for barrel bridge Screw for balance-bridge Screw for train wheel bridge Screw for barrel bridge Screw for chronograph bridge Screw for automatic device bridge Screw for setting lever jumper Screw for oscillating weight blue B Screw for pallet bridge Screw for chronograph bridge Transformation KIT in «C» version Kit base /12
13 Modifications of Technical Guide versions for Calibre 3313 Technical Guide versions First version: A Second version: B Pelrom Third version: C Made by: Rendav Fourth version D Last version: E Pelrom Modifications of Technical Guide version B Old version (A) New (B) Moebius Microgliss D5 Moebius SYNT-HP Moebius 9501 Moebius 9504 Old version (B) Modifications of Technical Guide version C New (C) Update of exploded views Update of the lubrication points Diverse Information Old version (C) Modifications of Technical Guide version D New (D) Only exploded views of basic Calibre 3303 Complete revision of the document For the following informations, see basic Technical Guide 3303 For the following informations, see document «General information for Calibres 3200, 3201, 3202, 3203, 3205, 3301, 3303, 3313 and 3603» 3 levels escapement Old version (D) Page 7: Automatic device bridge, pre-assembled reference Modifications of Technical Guide version E New (E) Corrections are made in red: Page 4: Modifications concerning Chronograph bridge Page 7: Automatic device bridge, pre-assembled reference /13
Technical Guide TG-19-C-017-E G. Made by: selrom Date: Modifications: see last page CALIBRE 3313
Technical Guide TG-19-C-017-E G Made by: selrom Date: 22.08.2011 3 Modifications: see last page CALIBRE 3313 A B C 12 Ø 27 mm Height on movement Power reserve Number of jewels Frequency 1 2 3 1 2 3 I II
More informationSpare parts list for Calibre 3313
Spare parts list for Calibre 3313 Main plate, jewelled, rhodium-plated Chronograph bridge, rhodium-plated 722331310020 722331315040 7221504018 72210020 722331315040 Barrel bridge, jewelled Barrel, complete
More informationSpare Parts list for Calibre 3301
Spare Parts list for Calibre 3301 Second wheel Shock-absorber, lower 722330332062 722330330027** 7223303B70531 Escape wheel In settings, upper 7223303A32127 722330330040 7223313B32127 Ratchet wheel In
More informationCATALOG SKU# REV. 09/2018 MY CAS-KER ACCOUNT NUMBER. genuine SELLITA. watch parts / CASKER.COM
CATALOG SKU# 900.114 REV. 09/2018 MY CAS-KER ACCOUNT NUMBER genuine SELLITA watch parts 1-800-487-0408 / CASKER.COM CALL 1-800-487-0408 FAX 1-800-487-5848 CASKER.COM Prices subject to change without notice.
More informationSwiss movement wristwatches assembled in Canada
Swiss movement wristwatches assembled in Canada Servicing of Vintage Tradition The Tradition brand was the house brand of the Sears and Roebuck Company. Case - Stainless steel case with acrylic crystal
More informationSPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
More information1870 Crescent Street. The First American Railroad Watch
1870 Crescent Street The First American Railroad Watch Why did they build it? In 1869 Charles Vander Woerd was in charge of the ¾ Plate or Nashua Department. The company decided to produce a high grade
More informationFull-skill Training Programme (4500 Hours)
Full-skill Training Programme (4500 Hours) Introduction During Henrik Korpela and Willem Hof's career, they noticed that there was a high demand for clever watchmakers possessing good skills, such as the
More informationPARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE (For Movement Replacement) [SPECIFICATIONS] Item Movement Cal. No. 9T82A Movement size Outside diameter Casing diameter Height ø33.0 mm ø30.0 mm 6.8 mm (x 1.0) Time indication
More informationINSTRUCTIONS FOR USE MODE D EMPLOI SELFWINDING MOVEMENT CALIBRES 3120 AND 3129
INSTRUCTIONS FOR USE MODE D EMPLOI SELFWINDING MOVEMENT CALIBRES 3120 AND 3129 1 2 3 4 Couronne vissée - Screwed crown A B C D A B D avec date with date sans date without date Couronne non vissée - Not
More informationWSG 8-115; 8-125; P; WSG ; WSG P; WSG PS; WSG P; WSG 15-70Inox
Repair instructions Page of 47 Contents. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required 6. Disassembly 7. Assembly 8. Connection
More informationServicing a Quarter Repeater
HJ-inners 0404.qxd 15/03/04 21:52 Page 133 Servicing a Quarter Repeater Richard French describes the mechanism and servicing of a modern quarter repeating pocket watch and its adjustment 1. Open faced
More informationCHRONOMETRE CONTEMPORAIN REXHEP REXHEPI
Long before the beginning of my career as an independent watchmaker, I was deeply inspired by the officer s watches with elegant lines combined with a dedication to accuracy and readability, making them
More informationHAMILTON WRIST WATCH 8/0 SIZE MODEL 747. Assembly Unit Part Number A Delivered to Department of the Army Ordnance Department.
PARTS CATALOG HAMILTON WRIST WATCH 8/0 SIZE MODEL 747 Assembly Unit Part Number 43011 A Delivered to Department of the Army Ordnance Department September 1949 Copyright 1949 HAMILTON WATCH COMPANY LANCAST~R,
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationEEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More informationJULES AUDEMARS CHRONOMETER WITH AP ESCAPEMENT
INSTRUCTIONS FOR USE MODE D EMPLOI JULES AUDEMARS CHRONOMETER WITH AP ESCAPEMENT CALIBRE 2908 - HAND-WOUND 1 2 4 3 A B ENGLISH Introduction p 33 - the Manufacture Audemars Piguet English Guarantee and
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationRepair manual. Fifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/212 1 Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety requirements and must
More informationLX1 Maintenance Manual for Model LX1B. Table of Contents 1. GENERAL DISASSEMBLY, ASSEMBLY AND ADJUSTMENT COMPONENTS...
KTI KITO Technical Information LX1 Maintenance Manual for Model LX1B LX1-1.1.2 1 / 14 Edition: D 03.06 Table of Contents 1. GENERAL...2 2. DISASSEMBLY, ASSEMBLY AND ADJUSTMENT...2 3. COMPONENTS...3 4.
More informationINTERAPID Small Bench SHE.30 or SHE.35
0 to 0 mm Mobile measuring bolt mounted on a plain bearing, also fitted with a semi-circular releasing disc plate. Measuring inserts supplied in pairs. One is tighten on the measuring bolt, the other on
More informationFifth-wheel coupling JSK 38/50
Repair manual Fifth-wheel coupling JSK 38/5 ZDE 199 3 12 E 6/25 1 LT SK38C-3 English RevA Foreword Table of contents Page Fifth wheel couplings are connecting parts that must comply with very high safety
More informationH. JENDRITZKI J. P. Matthey Repairing Antique Pendulum Clocks Translated by Paul Foulkes, B. A. B. Se. Ph. D. Reprint CONTENTS (See also Index page 94) Introduction Part I Gear Trains Pivots and arbors.
More informationSht of Shts A2. Brian Law's Wooden Clock 1. Not to Scale Unless otherwise stated. All dimensions in mm and (inchs) Designed by: Brian law
2 2 2 0 22 2 0 Not to Scale Unless otherwise stated Brian Law's Wooden Clock rd Angle projection www.woodenclocks.co.uk Jan 0 2 2 2 2 2 2 2 2 2 2 2 2 2 22 ITEM NO. PART NUMBER DESCRIPTION QTY. back Wood
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
More informationLesson 1: Introduction to The Watch Restoration Course
Epping Forest Horology Club Lesson 1: Introduction to The Watch Restoration Course 1 About What the Course we will Year 1 Entry Level assuming no prior knowledge Each week 30 45 minutes of theory followed
More information3-SPEED TRANSMISSION TEARDOWN GUIDE
3-SPEED TRANSMISSION TEARDOWN GUIDE Toro Service Training Material 3-Speed Transmission Teardown This is an exercise to take apart a 3-Speed transmission just as you would if one fails on a customer s
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationTable of Content. Machine Features and Functions. Specifications. Configuration and Working Principle 5. Machine Operation. Machine Adjustments
Table of Content Safety Instructions Machine Features and Functions Specifications 2 3 4 Configuration and Working Principle 5 Machine Operation 7 Machine Adjustments 8 Machine Installation 9 Machine Remove
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationHydrajaws Safety Lifeline Tester
Hydrajaws Safety Lifeline Tester Operating Instructions HYDR AJAWS LIMITED Hydrajaws Safety Lifeline Tester 4 5 1 6 7 2 3 9 10 8 12 11 TECHNICAL SPECIFICATIONS Load Gauges Range available: Analogue: 0-25kN/lb/f
More informationQUANTUM SPINAL. Presenter: John Perala, Product Manager. August 14, 2006
QUANTUM SPINAL ROD SYSTEM Key Features Presenter: John Perala, Product Manager August 14, 2006 Fixed Screw Sizes 475 4.75, 25-40mm 7.75, 30-50mm 5.75, 25-40mm 875 8.75, 30-40mm 6.75, 30-50mm Polyaxial
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationSpare Parts. Contents. Contents Contents
Spare Parts 2013 Spare Parts Contents Contents Contents LEGO Education StoryStarter 3 LEGO Education WeDo 4 Machines and Mechanisms 5 LEGO MINDSTORMS Education 6-8 TETRIX by Pitsco 9-16 LEGOeducation.us
More informationDual Time Resonance Sapphire: Maximum Horology, Total Transparency
Dual Time Resonance Sapphire: Maximum Horology, Total Transparency The Dual Time Resonance Sapphire by Armin Strom is a horological masterpiece: a chef d'œuvre combining the practicality of two completely
More informationSWOLE CEO ROCKEFELLER MANUAL
SWOLE CEO ROCKEFELLER MANUAL You have always known you are different. Born for more. In life, there are very few moments when you get a chance to feel this. The feeling of power. The feeling of control.
More informationOperating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More informationTECHNICAL INFORMATION Models No.
TECHNICAL INFORMATION Models. Description 6207D, 6217D, 6237D,, 9.6V, 12V, 14.4V Cordless Driver Drills 10mm (3/8") 12V, 14.4V, 18V Cordless Driver Drills 13mm (1/2") CONCEPT AND MAIN APPLICATIONS These
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationTECHNICAL SPECIFICATIONS OF THE RICHARD MILLE TOURBILLON RM 051 PHOENIX-MICHELLE YEOH
TECHNICAL SPECIFICATIONS OF THE RICHARD MILLE TOURBILLON RM 051 PHOENIX-MICHELLE YEOH Tonneau case - Limited edition of 18 unique pieces in 18k white gold, 18K red gold and titanium gem-set case. CALIBER
More informationSTANDARD GEAR SCREW WORM RATIO 3,5:1
ACCESSORIES FOR VERTICAL AWNINGS/SCREENS STANDARD GEAR SCREW WORM RATIO 3,5:1 Screw worm in aluminium. Crown in brass. Self-brake, through bearings. With or without stop, adjustable up to 19 cycles. One
More informationCONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION
CONTENTS PRECAUTIONS BEFORE STARTING OPERATION ------------------------------------- 1 PREPARATION FOR OPERATION 1. Adjustment of needle bar stop position ---------------------------------------------------------
More informationSECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
More information400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationHR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front
HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge
More informationClock 35 - Toyland. Construction instructions for Clock 35
This clock has been designed for children, it is a stand-alone unit and can be positioned on a shelf or cabinet out of the reach of very young hands who may be tempted to touch. The clock is shown in two
More informationINSTRUCTIONS FOR USE MODE D EMPLOI CHRONOGRAPH CALIBRE 2385 SELFWINDING
INSTRUCTIONS FOR USE MODE D EMPLOI CHRONOGRAPH CALIBRE 2385 SELFWINDING 4 1 2 e 6 5 f 3 7 A B C D Table OF CONTENTS Introduction p. 24 - The Manufacture Audemars Piguet About the watch p. 28 - The 2385
More informationEMB MANUFACTURING INC.
TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationRepair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A. Ref Rev.C General Pump is a Member of The Interpump Group
MK Repair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A General Pump is a Member of The Interpump Group 8 INDEX 1. INTRODUCTION..................................................Page 3 2. REPAIR INSTRUCTIONS...........................................Page
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationD3976 RECESSED EXIT INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES TEMPLATE INSTALLATION INSTRUCTIONS STRIKE HAND TOOL 5/32 HEX KEY ROD END CAPS EXIT DEVICE CRANK ARM
More informationIllustrated Parts: Model 853
Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3
More informationFMT 250; FMT 250Q; FMT 250QSL. Repair instructions FMT 250Q / FMT 250QSL. Page 1 of 30
Repair instructions FMT 250 FMT 250Q / FMT 250QSL Page 1 of 30 Contents 1. Models described 2. Technical data 3. Notes and requirements 4. Tools required 5. Lubricants and auxiliary substances required
More informationTORNOS AS 14 - SAS 16 - BS 20
SELLING / BUYING NEW AND USED MACHINE TOOLS REBUILDING OF MACHINE TOOLS PAE du Pays Rochois - BP 98 400, Rue de l'industrie - ETEAUX 74804 LA ROCHE SUR FORON France Tel: 00 33 (0) 4 50 03 17 52 Fax: 00
More informationINSTRUCTIONS FOR USE MODE D EMPLOI SELFWINDING MOVEMENT CALIBRES 2120, 2121 AND 5122
INSTRUCTIONS FOR USE MODE D EMPLOI SELFWINDING MOVEMENT CALIBRES 2120, 2121 AND 5122 1 2 3 A B Table OF CONTENTS Introduction p. 27 - The Manufacture Audemars Piguet About the watch p. 30 - The SELFWINDING
More informationBEARING AND TYPES OF BEARING
BEARING AND TYPES OF BEARING In this article, you will learn about bearing and types of bearing. Generally, all types of machinery are provided with supports for rotating shafts, the supporting device
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationGEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationThese are tricks or tips I use when working on a Mill These are intended for informational purposes only and not responsible for any injury or damage to the machine Removal of motor on a variable speed
More informationThuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
More informationMUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3
operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine General Information 2 DH-5/EH-5 Drilling EH-5 Drilling Machine General Information 3 Operating Instructions 4-5 DH-5
More informationHorological Milling Machine Bushing and Depthing Accessory
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Horological Milling Machine Bushing and Depthing Accessory P/N 2118 Overview When a non-jeweled clock or watch
More informationTWL 1500 TORQUE WRENCH LOADER
TWL 1500 TORQUE WRENCH LOADER OPERATOR S HANDBOOK (PART NUMBER 60246.1) CONTENTS PAGE 1 OF 8 INTRODUCTION 2 SPECIFICATION 3 ITEMS SUPPLIED 3 AVAILABLE OPTIONS 3 ASSEMBLY INSTRUCTIONS A. ASSEMBLY OF TRANSDUCER
More informationMoritz Grossmann presents the ATUM Date
Press Release Glashütte, March 2017 Moritz Grossmann presents the ATUM Date Premiere of the jumping date: 23 March at Baselworld The date indication, a complication coveted and often discussed by watch
More informationE4-WM5-Y542A00 MOUNTING INSTRUCTION
This instruction is for both left front (driver) 41-269282 and right front (passenger) 41-269299 B8 8112 shocks. A step by step process is shown with images of the right front. The left front is a mirror
More informationTURBO DRIVE INSTALLATION MODEL 1582T KNEE FEED Lagun Mill
TURBO DRIVE INSTALLATION MODEL 1582T KNEE FEED Lagun Mill NOTE This Turbo Drive Knee Feed is configured for mounting the feed on the front of the knee with the keypad facing left. The lead screw pitch
More informationMILLENARY MINUTE REPEATER WITH AP ESCAPEMENT
INSTRUCTIONS FOR USE MODE D EMPLOI MILLENARY MINUTE REPEATER WITH AP ESCAPEMENT CALIBRES 2910 AND 2928 1 2 g ON 3 N A B Table OF CONTENTS Introduction p 37 - the Manufacture Audemars Piguet - Millenary
More informationVBOSS. Surgical Technique. Vertebral Body Support System
VBOSS Surgical Technique Vertebral Body Support System 1. System Description 1.1 Implants...3 1.2 Instruments...4 2. Indications...8 3. Patient Position...8 4. Surgical Approach 4.1 Choice of adequate
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationRC4WD (R2D) R2 Disconnect Transmission Sideway Servo Mount Installation
RC4WD (R2D) R2 Disconnect Transmission Sideway Servo Mount Installation In this manual you will find out how to install the R2D Sideway servo mount. The disconnect tranny is used to help in competition
More informationBASE, COLUMN, ARM AND TABLE
SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationCHEVY SuperBracket Mounting Kit #0826
CHEVY SuperBracket Mounting Kit #0826 #1200 SuperGlide (16K) #0800 SuperGlide (20.5K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)
More informationTURBO DRIVE INSTALLATION MODEL 1580T KNEE FEED Lagun Mill (OEM)
TURBO DRIVE INSTALLATION MODEL 1580T KNEE FEED Lagun Mill (OEM) NOTE This Turbo Drive Knee Feed is configured for mounting the feed on the front of the knee with the keypad facing left. The lead screw
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationPARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
More informationFord Pick Up Rear leaf Spring Kit Installation Instructions
1948-1956 Ford Pick Up Rear leaf Spring Kit Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Parts 48 inch leaf (2) springs (4) U-bolts 3/8-24 x l 1/4bolts (16) & nuts (2) 1/2-20 x 4
More informationType XTSR71 Sizes
(Page 1 of 13) s 494-5258 Type XTSR71 s 494-5258 Figure 1 Thomas XTSR71 Coupling 1. General Information 1.1 Thomas Couplings are designed to provide a mechanical connection between the rotating shafts
More informationVBOSS Surgical Technique
VBOSS Surgical Technique 1 2 CONTENT 1. System Description 4 1.1 Implants 4 1.2 Instruments 6 2. Indications 11 3. Patient Position 11 4. Surgical Approach 12 4.1 Choice of adequate Parallel Distractor
More informationCrestline Dampening System. Installation Instructions. Hamada RS34 & VS34 Parent Unit DU34 Upper Unit. For Presses Originally Equipped With
Crestline Dampening System Installation Instructions Hamada RS34 & VS34 Parent Unit DU34 Upper Unit For Presses Originally Equipped With Molleton Dampeners X88-78 01/2001 Rev-A GENERAL INFORMATION ATTENTION
More informationHeavy Duty Mechanic s Kit
Heavy Duty Mechanic s Kit 00 Safety Warning Read all instructions and safety warnings prior to operation. Failure to do so could result in equipment damage, personal injury or even death. CAUTION 00: FAILURE
More informationEYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES
EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES 111-1 10.0x 0.012 111-1.5 6.5x 111-2 5.0x 111-2.5 4.0x 111-3 3.5x 111-3.5 3.0x 111-4 2.5x Plastic eyeglass
More informationFBX1104P FBX1104 FBX1106P FBX1106
FBX1104P FBX1104 FBX1106P FBX1106 Second edition : September 2004 No. 040037 INTRODUCTION Thank you for your purchasing Kansai Special's FBX Series. Read and study this instruction manual carefully before
More informationIN20733 Rev. B 1/06/2016
14,000 LBS. (6350 Kg.) Bolt-on Alignment Kit Installation Instructions S100129, S100130, S100131 S100132, S100133, S100134 S100135, S100136, S100137, S100173, S100174 Model Max Wheel Base Max 2 Wheel Alignment
More informationBRAVO STERN DRIVE 3 C BRAVO ONE
RAVO STERN DRIVE 3 C 22439 RAVO ONE Table of Contents Page Specifications............................... 3C-1 Torque Specifications..................... 3C-1 Preloads................................ 3C-1
More informationTOURBILLON, MINUTE REPEATER AND CHRONOGRAPH
INSTRUCTIONS FOR USE MODE D EMPLOI TOURBILLON, MINUTE REPEATER AND CHRONOGRAPH CALIBRES 2874 AND 2934 HAND-WOUND 4 1 2 e 5 g 3 f A B Table OF CONTENTS Introduction p. 30 - The Manufacture Audemars Piguet
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationOperating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
More information