OUTSIDE STRIKE INSIDE. TEMPLATE-S6100 Devices covered by this template: Panic Rim Device and Fire Rim Device. FINISHED FLOOR
|
|
- Hugh Knight
- 5 years ago
- Views:
Transcription
1 TRIM MOUNTING HOLS: 1. rill 7/16 dia. Thru Holes 4X THIS SI UP FOR LHR OOR 4X.375 dia. US FOR SXOLTS STRIK MOUNTING HOLS: 1. rill.201 dia. (#7 rill) holes 2X. 2. Use #1/4-20 Tap JUST TH STRIK FOR PROPR LIGNMNT WITH TH LTH OLT. LOK STRIK IN PL Y TIGHTNING TH SRWS T TH X & Y POSITIONS USING 3/16" dia. RILL. RILL TH 3rd HOL T TH Z POSITION N TP WITH #12-24 TP. TTH 3rd SRW. KST 2-7/16 TO F OF STOP 4X.201 dia. THRU INSI MOUNTING HOLS For Metal oor Surface pplication: 1. rill.201 dia. holes as marked 2. Use #1/4-20 tap. For Sex olt pplication: Metal oor:.280" rill Inside 3/8 rill Outside Wood oor: 3/8 rill Thru (Suggested to fix evice hassis y Sex olt) TO F OF STOP 2-7/16 FTR XIT VI IS UT N MOUNT, INSTLL N P RKT NTR ON 3-11/16" VI 1/2 dia. L LRN.575 X 1/2 dia. THRU L OF STRIK 2-5/8" Z Y L OF VI TO F OF STOP KST 2-7/ /16 TO F OF STOP 3-11/16" 1-3/32" 40" 2.00" Watch for special mounting height requirements 801 venida caso, amarillo, a (805) Fax: (805) mail: service@sdcsecurity.com OUTSI THIS SI UP FOR RHR OOR P:\INSTLLTION INST\Mechanical Hardware\TMP-S6100.vsd RV Page 1 STRIK INSI TMPLT-S6100 evices covered by this template: Panic Rim evice and Fire Rim evice. FINISH FLOOR
2 TRIM MOUNTING HOLS; 1. rill 7/16" dia. Thru Holes 4X. 4X.375 dia. US FOR SXOLTS THIS SI UP FOR LHR OOR STRIK MOUNTING HOLS: 1. rill.201 dia. (#7 rill) holes 2X. 2. Use #1/4-20 Tap JUST TH STRIK FOR PROPR LIGNMNT WITH TH LTH OLT. LOK STRIK IN PL Y TIGHTNING TH SRWS T TH X & Y POSITIONS USING 3/16" dia. RILL. RILL TH 3rd HOL T TH Z POSITION N TP WITH #12-24 TP. TTH 3rd SRW. KST 2-7/16 TO F OF STOP 4X.201 dia. THRU INSI MOUNTING HOLS For Metal oor Surface pplication: 1. rill.201 dia. holes as marked 2. Use #1/4-20 tap. For Sex olt pplication: Metal oor:.280" rill Inside 3/8 rill Outside Wood oor: 3/8 rill Thru (Suggested to fix evice hassis by Sex olt) 1-1/2 dia. THRU TO F OF STOP 2-7/16 L OF STRIK 2-5/8" Z X Y L OF VI TO F OF STOP KST 2-7/16 FTR XIT VI IS UT N MOUNT, INSTLL N P RKT NTR ON 3-11/16" VI 1/2 dia..575 LRN OPTIONL 1/2 dia. WIR RUN /16" 2-7/16 TO F OF STOP 1-3/32" 40" STRIK OUTSI THIS SI UP FOR RHR OOR P:\INSTLLTION INST\Mechanical Hardware\TMP-S6100-K_GK.vsd RV F Page " INSI Watch for special mounting height requirements FINISH FLOOR 801 venida caso, amarillo, a (805) Fax: (805) mail: service@sdcsecurity.com TMPLT-S6100 K/GK LTRI TRIM evices covered by this template: Panic Rim evice and Fire Rim evice.
3 F OF OOR STOP For double door without mullion, * dimension is to G OF OOR 4X PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS 801 venida caso, amarillo, a (805) Fax: (805) mail: service@sdcsecurity.com TMPLT-S6200 SURF MOUNT VRTIL RO Fold line Fold line 2X 3-11/16" (94mm) 7-13/32" (188mm) NTRLIN OF VI XIT VI 40" (1016mm) To Finished Floor 1. raw a centerline horizontally across the door, 40" (1016mm) from bottom of door. 2. raw a vertical centerline 2-7/16 from edge of door. 3. Select the appropriate side of both templates. (1 & 2). Your door handing will determine the appropriate side, either (LHR) or (RHR). 4. Using dimensions indicated on templates 1 & 2, locate and mark the center of the required holes. 5. rill holes as indicated by their designated letter. imension Guide for LHR (Left Hand Reverse door) Template 1 6. If using an exterior trim, refer to the template with trim to further prepare door. MTL Panic Rated: rill/tap for 1/4-20 machine screws (sexbolts recommended). MTL Fire Rated: Sexbolts required. SXOLTS: rill 3/8 (9.5mm) clearance holes on Push and Pull Sides. WOO: Pre-rill 1/8 (3mm) hole. TMPLT 1 2" (51mm) 1" (25.4mm) TUTING SHFT HOL: rill 1/2 thru hole. P:\INSTLLTION INST\Mechanical Hardware\TMP-S6200.vsd RV Page 1 ny suggestions or comments to this instruction or product are welcome. Please contact us through our website or engineer@sdcsecurity.com
4 imension Guide for RHR (Right Hand Reverse door) Template 2 PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS * For double door without mullion, dimension is to G OF OOR 4X L F OF OOR STOP 1. raw a centerline horizontally across the door, 40" (1016mm) from bottom of door. 2. raw a vertical centerline 2-7/16 from edge of door. 3. Select the appropriate side of both templates. (1 & 2). Your door handing will determine the appropriate side, either (LHR) or (RHR). 4. Using dimensions indicated on templates 1 & 2, locate and mark the center of the required holes. 7-13/32" (188mm) 2X 3-11/16" (94mm) Fold line 5. rill holes as indicated by their designated letter. 6. If using an exterior trim, refer to the template with trim to further prepare door. NTRLIN OF VI XIT VI MTL Panic Rated: rill/tap for 1/4-20 machine screws (sexbolts recommended). MTL Fire Rated: Sexbolts required. SXOLTS: rill 3/8 (9.5mm) clearance holes on Push and Pull Sides. WOO: Pre-rill 1/8 (3mm) hole. 40" (1016mm) To Finished Floor Fold line TUTING SHFT HOL: rill 1/2 thru hole. TMPLT 2 P:\INSTLLTION INST\Mechanical Hardware\TMP-S6200.vsd RV Page 2 1" (25.4mm) 2" (51mm)
5 INTRIOR F OF OOR 7/8 (22mm) Fold line Fold line 2-7/16 F OF OOR STOP F OF OOR STOP ottom Strike 1-25/32 (71mm) * See template #1 for note 19/32 (15mm) 2-13/32 (61mm) Top Latch racket ottom Latch racket 1-7/32 (31mm) 27/32 3X 5-5/8 (143mm) 4-7/16 (113mm) 2-3/8 (60mm) TOP OF OOR FRM OOR F PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS rill 11/64 diameter hole, use #12-24 tap. rill 3/4 (19mm) diameter hole 2-1/4 (57mm) deep. OTTOM OF OOR imension Guide for LHR Template 3 MTL oor: US SXOLTS-rill 9/32 (7mm) hole push side. 13/32 (10mm) hole pull side WOO oor: US SXOLTS-rill 13/32 (10mm) hole through door. For optional wood screws, drill 1/8 pilot holes, 1.0" deep. ut out this area to a depth of 7/8 (22mm) into floor INTRIOR F OF OOR TMPLT 3 imension Guide for RHR Template 4 PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS MTL oor: US SXOLTS-rill 9/32 (7mm) hole push side. 13/32 (10mm) hole pull side TOP OF OOR FRM OOR F WOO oor: US SXOLTS-rill 13/32 (10mm) hole through door. For optional wood screws, drill 1/8 pilot holes, 1.0" deep. rill 11/64 diameter hole, use #12-24 tap. rill 3/4 (19mm) diameter hole 2-1/4 (57mm) deep. TMPLT 4 OTTOM OF OOR ut out this area to a depth of 7/8 (22mm) into floor 5-5/8 (143mm) 4-7/16 (113mm) 2-3/8 (60mm) 19/32 (15mm) 2-13/32 (61mm) See template #2 for note Top Latch racket ottom Latch racket 1-7/32 (31mm) 27/ /32 (71mm) 7/8 (22mm) * 2-7/16 F OF OOR STOP Fold line F OF OOR STOP ottom Strike Fold line P:\INSTLLTION INST\Mechanical Hardware\TMP-S6200.vsd RV Page 3
6 FOR SUTHON TRIM ONLY 1 ackset 2-11/16 NOT: This template is for 1-3/4 thick door. For thicker doors, tear off here and locate of lock on of edge of door. TMPLT Mortise Lock xit evices imensional only. Not to scale. FOR LHR OOR FOR OPPOSIT HN PLS S RVRS SI FOR ROS TRIM ONLY 2 1 #12-24 TP ackset 2-11/16" 3/8 ia. THRU HOL FOR MOUNTING POST MORTIS UT-OUT FOR LOKS 1" XIT VI NTRLIN MORTIS LOK NTRLIN STRIK NTRLIN 801 venida caso, amarillo, a (805) Fax: (805) mail: service@sdcsecurity.com 5/8 2-1/8 1.00" ia. LVR HOL 1-23/32 2 2X 9/16 1-1/2 ia. YLINR HOL 15/32 2 2X 19/32 2X.375 ia. 3-9/32 3-1/4 3-5/8 3-5/8 HIGHT 6-17/33" PTH 4-1/2 RSS 1/4 TO FIT F PLT Fold and place on door edge 1-30/32" 17/32" /32" TMPLT-S6300 evices covered by this template: Panic Mortise evice and Fire Mortise evice. OUTSI F OF OOR P:\INSTLLTION INST\Mechanical Hardware\TMP-S6300.vsd RV Page 1 3/8 ia. THRU HOL FOR MOUNTING POST MTH WITH VRTIL LIN RWN ON OOR 1 OF OOR THIKNSS & LOKS UT-OUT IS FOR VI SI ONLY (THRU ON WLL) 3 7/32" I./#1/4-20 TP LTH SSMLY HOLS INSI F OF OOR ny suggestions or comments to this instruction or product are welcome. Please contact us through our website or engineer@sdcsecurity.com
7 FOR RHR OOR FOR OPPOSIT HN PLS S RVRS SI TMPLT Mortise Lock xit evices imensional only. Not to scale. ackset 2-11/16" NOT: This template is for 1-3/4 thick door. For thicker doors, tear off here and locate of lock on of edge of door. #12-24 TP ackset 2-11/16 3/8 ia. THRU HOL FOR MOUNTING POST 1 FOR SUTHON TRIM ONLY FOR ROS TRIM ONLY 1 2 INSI F OF OOR 801 venida caso, amarillo, a (805) Fax: (805) mail: service@sdcsecurity.com /32" TMPLT-S6300 evices covered by this template: Panic Mortise evice and Fire Mortise evice /32" UT-OUT IS FOR VI SI ONLY (THRU ON WLL) 1-30/32" 3 Fold and place on door edge 3-5/8 3-5/8 MORTIS UT-OUT FOR LOKS 1" HIGHT 6-17/33" PTH 4-1/2 RSS 1/4 TO FIT F PLT OF OOR THIKNSS & LOKS 15/32 1-1/2 ia. YLINR HOL 1.00" ia. LVR HOL 2-1/8 1-23/32 2 3/8 ia. THRU HOL FOR MOUNTING POST 2X 9/16 2X.375 ia. 1 2X 19/32 MTH WITH VRTIL LIN RWN ON OOR 2 3-9/32 3-1/4 XIT VI NTRLIN MORTIS LOK NTRLIN OUTSI F OF OOR P:\INSTLLTION INST\Mechanical Hardware\TMP-S6300.vsd RV Page 2
8 G OF OOR 801 venida caso, amarillo, a (805) Fax: (805) mail: 2X 1-7/16" (35.3mm) PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS TMPLT-S6800 ONL VRTIL RO Fold line Fold line 2X 1-7/16" (35.3mm) 3-3/8" (85.4mm) 2X 3-11/16" (94mm) 7-13/32" (188mm) NTRLIN OF VI XIT VI UT-OUT (2 PLS) VI SI ONLY 40" (1016mm) To Finished Floor 1. raw a centerline horizontally across the door, 40" (1016mm) from bottom of door. 2. raw a vertical centerline 2-7/16 from edge of door. 3. Select the appropriate side of both templates. (1 & 2). Your door handing will determine the appropriate side, either (LHR) or (RHR). 4. Using dimensions indicated on templates 1 & 2, locate and mark the center of the required holes. 5. rill holes as indicated by their designated letter. imension Guide for LHR (Left Hand Reverse door) Template 1 6. If using an exterior trim, refer to the template with trim to further prepare door. MTL Panic Rated: rill/tap for 1/4-20 machine screws (sexbolts recommended). MTL Fire Rated: Sexbolts required. SXOLTS: rill 3/8 (9.5mm) clearance holes on Push and Pull Sides. TMPLT 1 2" (51mm) 1" (25.4mm) TUTING SHFT HOL: rill 1/2 thru hole. P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page 1 ny suggestions or comments to this instruction or product are welcome. Please contact us through our website or engineer@sdcsecurity.com
9 G OF OOR imension Guide for RHR (Right Hand Reverse door) Template 2 PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS 2X 1-7/16" (35.3mm) 2X 3-11/16" (94mm) 2X 1-7/16" (35.3mm) 1. raw a centerline horizontally across the door, 40" (1016mm) from bottom of door. 2. raw a vertical centerline 2-7/16 from edge of door. 3. Select the appropriate side of both templates. (1 & 2). Your door handing will determine the appropriate side, either (LHR) or (RHR). 4. Using dimensions indicated on templates 1 & 2, locate and mark the center of the required holes. 7-13/32" (188mm) 3-3/8" (85.4mm) Fold line 5. rill holes as indicated by their designated letter. NTRLIN OF VI 6. If using an exterior trim, refer to the template with trim to further prepare door. XIT VI MTL Panic Rated: rill/tap for 1/4-20 machine screws (sexbolts recommended). MTL Fire Rated: Sexbolts required. SXOLTS: rill 3/8 (9.5mm) clearance holes on Push and Pull Sides. 40" (1016mm) To Finished Floor UT-OUT (2 PLS) VI SI ONLY Fold line TUTING SHFT HOL: rill 1/2 thru hole. TMPLT 2 1" (25.4mm) 2" (51mm) P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page 2
10 Top oor Frame PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS Top dge of oor TOP G OF OOR Hollow Metal oors Welded Mounting Plates (not supplied) 1-11/32" (34mm) 3-9/64" (80mm) 1/4 (6mm) 1-3/4 (44mm) P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page /32" (46.5mm) 15/32" (12mm) 5/64" (2mm) 1-27/64" (36mm) TMPLT 3 63/64 (25mm) 1-5/16 (33mm) 1/8" (3mm) 3/8" (10mm) Hollow Metal oors Welded Mounting Plates (not supplied) 1-9/32" (33mm) 7/64" (2.7mm) 7/16" (11mm) 1-19/32" (40.4mm) 1-17/32" (38.7mm) 7/8" (22mm) 1-11/16" (43mm) 5/16" (8mm) 4-1/4 (108mm) imension Guide for LHR Template 3 MTL Panic Rated: rill/tap for M5-0.8P x 15 machine screws. MTL Fire Rated: rill/tap for M5-0.8P x 15 machine screws. MTL: rill/tap for M5 x 10 machine screw
11 Top oor Frame PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS Top dge of oor P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page /32" (40.4mm) 3/8" (10mm) 1-9/32" (33mm) 7/16" (11mm) 7/64" (2.7mm) 1/8" (3mm) 5/16" (8mm) 1-11/16" (43mm) 7/8" (22mm) 1-17/32" (38.7mm) 4-1/4 (108mm) TOP G OF OOR 1-3/4 (44mm) 3-9/64" (80mm) 1/4 (6mm) 1-11/32" (34mm) Hollow Metal oors Welded Mounting Plates (not supplied) 15/32" (12mm) 1-27/32" (46.5mm) 63/64 (25mm) 1-27/64" (36mm) 5/64" (2mm) TMPLT 4 1-5/16 (33mm) Hollow Metal oors Welded Mounting Plates (not supplied) imension Guide for RHR Template 4 MTL Panic Rated: rill/tap for M5-0.8P x 15 machine screws. MTL Fire Rated: rill/tap for M5-0.8P x 15 machine screws. MTL: rill/tap for M5 x 10 machine screw
12 ottom dge of oor Finished Floor 7/16" (11mm) 1-17/32" (38.7mm) 7/8" (22mm) 1-9/32" (33mm) 7/64" (2.7mm) 1-19/32" (40.4mm) 5/16" (8mm) P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page /16" (43mm) 4-1/4 (108mm) 1/8 (3mm) 3/8 (10mm) imension Guide for LHR Template 5 PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS OTTOM G OF OOR Strike: rill a 3/4 (19mm) diameter hole x 2-1/4 (57mm) deep ut out this area to a depth of 7/8 (22mm) into floor. TMPLT 5 Hollow Metal oors Welded Mounting Plates (not supplied) 1-1/8" (28.6mm) 2-1/4" (57.2mm) 1-7/8 (47mm) MTL: rill/tap for M5 x 10 machine screws.
13 Finished Floor 5/16" (8mm) 1-19/32" (40.4mm) 7/64" (2.7mm) 1-9/32" (33mm) 7/16" (11mm) 7/8" (22mm) ottom dge of oor 1-17/32" (38.7mm) P:\INSTLLTION INST\Mechanical Hardware\TMP-S6800.vsd RV Page /16" (43mm) 4-1/4 (108mm) 3/8 (10mm) 1/8 (3mm) 1-1/8" (28.6mm) 2-1/4" (57.2mm) 1-7/8 (47mm) imension Guide for RHR Template 6 PULITION MY NOT TO SL. O NOT US TMPLT TO MRK ISTNS OTTOM G OF OOR Strike: rill a 3/4 (19mm) diameter hole x 2-1/4 (57mm) deep ut out this area to a depth of 7/8 (22mm) into floor. TMPLT 6 MTL: rill/tap for M5 x 10 machine screws.
Note: The dimensions of the Template are shown in inches. See attached page for the Metric Conversion Table for millimeters.
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com These instructions are presented a in step by step sequence. Please read it through before installation.
More informationED1100 /1100F SERIES RIM EXIT DEVICE INSTALLATION INSTRUCTIONS
E1100 /1100F SERIES RIM EIT EVIE INSTALLATION INSTRUTIONS Ver.2 1100 SERIES RIM EIT EVIE End ap End ap Bracket End ap End ap Bracket over Plate Mechanism ase enter ase SPEIAL TOOLS REQUIRE Push Bar Hex
More information33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
More information33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
More information4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
More information98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
More information8800 Series Mortise Lockset Knob, Lever, Reflections and Security Trims Installation Instructions
8800 Series Mortise Lockset Knob, Lever, Reflections and Security Trims Installation Instructions IMPORTNT: The accuracy of the door preparation is critical for the proper functioning and security of this
More informationSSRLS-3 / SSRLU-3 Installation Instructions
5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -
More informationInstallation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
More information33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
More informationED5200(A) Series Rim Exit Devices
ED5200() Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 08/11 For Metal, omposite and Wood Doors of Either Hand End lamp (3) 8-32 x 5/16" Flat Head, Undercut
More informationED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
More informationOVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
More information98/ Customer Service # Dogging Key (use to lock down pushbar)
911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2014 Printed in U.S.A. 911373-00 Rev. 05/14-f
More information* * 9875/ Customer Service #10-24 # Dogging Key (use to lock down pushbar)
*911374-00* 911374-00 Mortise Exit Device 9875/9975 Installation Instructions #10-24 #12-24 Dogging Key (use to lock down pushar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2015 Printed
More informationBEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
More information8' Multi-Purpose Easi-Frame Assembly Instructions
1 8' Multi-Purpose asi-frame ssembly Instructions Using this frame with: n XL Joinery door pair (using hinges) with either fixed or hinged asi-frame side panels or emi Panels on either side asi-frame Panels
More informationMortise Lock Installation Instructions 8800 Series (Knob, FL, RL and SL Trims) and YMM100 Series (FL and RL Trims)
Mortise Lock Installation Instructions 8800 Series (Knob, FL, RL and SL Trims) and YMM100 Series (FL and RL Trims) * RMOVING COVR SCRWS VOIS LOCK OY WRRNTY R * WN USING RFLCTIONS TRIMS, SUR LOCK SIGNTION
More information5' Multi-Purpose Easi-Frame Assembly Instructions
1 5' Multi-Purpose asi-frame ssembly Instructions Using this frame with: n XL Joinery door pair (using hinges) with either a fixed or hinged asi-frame emi Panel XL Panels used as a i-fold with a fixed
More informationActive Push Bar. Safety glasses Measuring tape Level Pencil Power drill Drill bits: 5/32, 3/4 Center punch Phillips screw driver
EX88 Interlocking Rim Exit Device Preparation Guide and Installation Instructions Box Contents EX88 Interlocking Rim Exit Device Back Bar Filler Plate Active Push Bar Cylinder and Trim Interface Kit Mounting
More informationInstallation Instructions
Installation Instructions s asy s I 200 Series Multi-Sized thru 6 Universal oor losers Tri-Pack Standard as 20 Regular rm Parallel rm Jamb Mount 200 IMPORTNT: OR INSTLLIN: Pages 2 & 20 Pages & 5 220 Pages
More informationInstallation Instructions Model # TEL-100 / 200 Manual Locking or Self Locking
INSTLLTION INSTRUTIONS TL-100 / 200 GSS-oors TL 1-406-212-2334 MIL rg@gssdoors.com W www.gssdoors.com GSS oors (406) 212-2334 (406) 897-2121 rg@gssdoors.com www.gssdoors.com TM Multi-Point eadbolt Installation
More information7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Shim (2) Supplied Strike Plate 791 Strike (3) 10-24 x 3/4 (19mm) PFHMS Strike Angle Must Engage Strike 12-24 FHPMS
More informationINSTALLATION INSTRUCTIONS Z7800 SERIES MORTISE LOCK
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 4940622 www.sdcsecurity.com Email: service@sdcsecurity.com A. Door Preparation: INSTALLATION INSTRUCTIONS Z7800 SERIES MORTISE LOCK 1. Measure desired height
More information*D-1030* 1 PARTS CHECK 8 REVERSING INSTRUCTIONS F-XX-C & XX-C D Customer Service. Installation Instructions. Exit Devices
*D-1030* D-1030 F-XX-C & XX-C Exit Devices Installation Instructions 8 REVERSING INSTRUCTIONS TO REVERSE THE HANDING OF A (F)XX-C DEVICE NOTE: TO REVERSE TRIM, REFER TO SEPARATE INSTALLATION SHEETS. 1
More informationThis is a printable pdf document. For Smartphone-friendly version, tap or click here.
This is a printable pdf document. For Smartphone-friendly version, tap or click here. *911373-00* 911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More information* * 98/9950WDC. Fire-Rated Devices include these. additional components. 1-Point Latch (LBL)
*24739468* 24739468 98/9950WDC Installation Instructions 1-Point Latch (LBL) Fire-Rated Devices include these additional components Metal Edge Wrap required for 60 and 90-minute applications 2-Point Latch
More informationINSTALLATION INSTRUCTIONS Z7800 SERIES MORTISE LOCK
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com A. Door Preparation: INSTALLATION INSTRUCTIONS Z7800 SERIES MORTISE LOCK 1. Measure desired height
More information* * 22 & 22-F. Please give these instructions to building owner after device is installed BS EN 1125 : 2008
*911407-00* Rim device 911407-00 22 & 22-F Installation Instructions BS EN 1125 : 2008 Devices covered by these instructions: 22 Rim Exit Device 22-F Rim Fire Exit Device These instructions are presented
More informationED5200(A) Series Rim Exit Devices
ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat
More informationSafety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
More informationShim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
More informationLATCHBOLT FILLER PLATE ASA FILLER PLATE A. SINGLE DOOR B. DOUBLE DOOR WITH MULLION C. DOUBLE DOOR WITHOUT MULLION END COVER MOUNTING BRACKET
F2000R 2012.03 1/4 x1 1/2 (9 PCS) SELF TAPPING MACHINE SCREWS 1/4-20P x 3/4 (3 PCS) 1/4-20P x 3/4 (6 PCS) ROUND HEAD MACHINE SCREWS THRU BOLT (6 PCS) END COVER MOUNTING BRACKET 1/4 x 1 1/4 (3 PCS) 1/4
More informationInstallation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationINSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
More informationInstallation Instructions
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
More informationED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
More information1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
More informationED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,
More informationExit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
More information1500(F) Rim Exit Devices Installation Instructions
1500(F) Rim Exit Devices Installation Instructions Singe Doors or Pairs (Panic Label) 1500 - RHR 1500 - LHR 1500F - RHR (Fire Label) 1500F - LHR Standard Device Package Devices are packed ready for application
More informationCRCODE-202. Mechanical Lock. Instruction and Programming Manual. Before Installing:
CRCODE-202 Mechanical Lock Instruction and Programming Manual Before Installing: 1. Please read the instructions carefully to prevent missing important steps. *Note: Improper installations may result in
More informationDoor Hardware Installation Instructions. For Assistance Call:
For Assistance Call: Door Hardware Installation Instructions Single Cylinder NOTE: s fit doors 1-3/4 to 2-1/4 thick. For thicker doors, please call customer service. Carefully unpackage all components
More informationInstallation Instructions ED4400, ED4400M & ED4400MA Series Surface Vertical Rod Exit Devices
Installation Instructions ED4400, ED4400M & ED4400MA Series Surface Vertical Rod Exit Devices In U.S.: Corbin Russwin, Inc. 225 Episcopal Road Berlin, CT 06037 USA www.corbinrusswin.com In Canada: Door
More informationInstallation Instructions. Installation Type
Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
More informationInstallation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
More informationCENTER LINES OF OPTICAL CONNECTOR NOTE 2 CENTER LINES OF OPTICAL CONNECTOR CFP2-BASELINE-DRAWING 1L A3-B1-SW006 1/15 DETAIL B A16
02 4.0 7 04 NTR LINS O OPTIL ONNTOR NOT 2 MSURMNT IRLOW IRTION TIL 1 01 07 -- 17 1 05 0 20 19 NTR LINS O OPTIL ONNTOR 12 15 0 11 NOT. r 2-0 NOT.5 f PIN 5 PIN 104 2-21 14 1 4-09 TOP N OTTOM LIMITS O TH
More informationWOOD DOOR INSTALLATION
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-32VD9W TEMPLATE FOR VON DUPRIN 99 RIM WOOD DOOR INSTALLATION WHEN USING
More informationCONCEALED ROD CRASH BAR PR-7085 SERIES EXIT DEVICE ASSEMBLY DETAILS PR mm. 10mm. Lock cylinder. 10mm. Cross bar length (see note #8) Dogging
Floor line TITLE ASSEMLY DETAILS PR-7085 4:02 Hinge stile (inside) Lock stile (inside) Lock stile (outside) Drill 5mm (.20) and tap 1/4-20 (2) Drill 7mm (.266) holes (2) 9mm 12mm See note #6 160mm 9.5mm
More information1510(F) Surface Vertical Rod Exit Devices Installation Instructions
1510(F) Surface Vertical Rod Exit Devices Installation Instructions Top Mounting Plate (2) 1/4-20 x 3/4" PFHMS Rod Guide Top Rod Shim (2 Supplied) Strike Plate 791 Strike (3) 10-24 x 3/4" PFHMS or (3)
More information7130(F) Series Mortise Exit Devices Installation Instructions
7130(F) Series Mortise Exit Devices Installation Instructions Outside Trim Device is packed ready for any Yale 650F or 660F Series Trim. End Clamp (3) 8-32 x 5/16" PUFHMS End Cap (2) 1/4-20 x 1" PPHMS
More information1790 Touchbar. Installation Instructions. Rim Panic Device ININST Index:
Installation Instructions ININST.1001 1790 Touchbar Rim Panic Device Index: Before Installation... 2 Installation... 2 Touchbar Dogging... 7 RM170 Mullion Installation... 8 Field Sizing Device... 10 2090
More informationBB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
More information33/3550AWDC. Fire-Rated Devices include these. additional. components. 1-Point Latch (LBL) Metal Edge Wrap required for 60 and 90-minute applications
24739476 33/3550AWDC nstallation nstructions 1-Point Latch (LBL) Fire-Rated Devices include these additional components Metal Edge Wrap required for 60 and 90-minute applications 2-Point Latch includes
More informationTH955 & TH959. Heavy Duty Thumbpiece Trim For use with ED5000 Series Exit Device. Metal, Wood or Composite Doors
TH955 & TH959 Heavy Duty Thumbpiece Trim For use with ED5000 Series Exit Device Metal, Wood or Composite Doors TH955 Classroom Function TH959 Storeroom Function 1 Template Top DOOR Holes Marked "" OUTSIDE
More informationINSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) Endcap P/N:
103104 January 20, 2009 INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) ED Electric Dogging ER ELECTRIC LATCH RETRACTION
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
More information316R Series Installation Instructions
316R Series Installation Instructions Multi size 1 thru 6 Non hold open closers CAUTION An incorrectly installed or improperly adjusted closer can cause property damage or personal injury. These instructions
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY
More informationEntry Mortise Handleset
1. Pencil 2. No. 2 and No. 3 Phillips Head Screwdrivers 3. No. 1 and No. 2 Slotted Screw Drivers 4. 1/8" Allen Head Wrench 5. 3/4" Wood Chisel or Corner Chisel 6. Measuring Device 7. Lock Mortising Tool
More informationTECHNICAL DATA SHEET STANDARD STEEL FRAMES SPECIFICATIONS MESKER STANDARD STEEL FRAMES
DS-201-1 STANDARD STEEL FRAMES SPECIFICATIONS STANDARD STEEL FRAMES 1. Frames shall be manufactured by Mesker Door Incorporated and designated as F-416 (16 GA) or F-414 (14 GA) for 1 3/4 doors, F-412 for
More informationNo. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
More informationInstallation Instructions For The 8850FL Series Mortise eboss
Installation Instructions For The 8850FL Series Mortise eboss Electronic Battery Operated Security Solution FEATURES Battery Operated (Hardwire Capable) Motorized Grade 1 Mortise Lock 94 User Code Capacity
More information55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationMasonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
More informationFor installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
More information* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
More informationMONOGRAM 36" BUILT-IN FRENCH-DOOR BOTTOM-FREEZER
MONOGRM 36" UILT-IN FRNH-OOR OTTOM-FRZR STION 1 FLUSH INST INSTLLTION STION 2 STNR INSTLLTION FRM PNLS 3/4" OVRLY PNLS MONOGRM 36" UILT-IN FRNH-OOR OTTOM-FRZR OVRLL IMNSIONS FTR PNL INSTLL 38" (96.5) FLUSH
More information88 Series. Exit device
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
More information55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
More informationAn ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
More informationINTELLIKEY. Lock Identification GENIUS AT YOUR FINGERTIPS. 1 rev:
INTELLIKEY R GENIUS AT YOUR FINGERTIPS Lock Identification 1 rev: 073103 rev: 073103 2 Easy Lock Identification Mortise Lockset Shown at left is a standard mortise function lockset. The cylinder is normally
More informationDME TOGGLE-LOK POSITIVE EARLY EJECTOR PLATE RETURN INSTALLATION INSTRUCTIONS FOR STANDARD TOP MOUNT CATALOG NO. TLTM-100
DME TOGGLE-LOK POSITIVE EARLY EJECTOR PLATE RETURN INSTALLATION INSTRUCTIONS FOR STANDARD TOP MOUNT CATALOG NO. TLTM-100 Failure to comply with these warnings may lead to personal injury. COMPONENT FALL
More informationSECURITECH GROUP, INC. MP POLICE LOCK. MODEL 4840B-TTBG_HG-3_ or 4840B-TTBG_HG-4_. Packing List. Documentation: Items: Fasteners:
SECURITECH GROUP, INC. MP POLICE LOCK Packing List MOEL 4840B-TTBG_HG-3_ or 4840B-TTBG_HG-4_ Items: Fasteners: Part# Qty Name escription/usage Part# Qty Name escription/usage Lock Mechanism 1 4840 Mechanism
More informationFRAME PREPARATION 3900/8900 SURFACE LATCH CONCEALED ROD EXIT DEVICE INSTALLATION INSTRUCTIONS HOW TO FIND BACKSET. Date: Appvd: *13/16 2 3/4" 3/4 HOLE
FRAME PREPARATION 3/4 3/4 HEADER STRIKE STRIKE STOP FRAME 13/16 13/16 RHR LHR INTERIOR FACE OF LHR INTERIOR FACE OF RHR STRIKE POST *13/16 * MEASURED FROM THE INTERIOR SURFACE. BE SURE TO ADJUST FOR SILENCERS
More informationED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
More information88 Series. Exit device
88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products
More information1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
More informationDC3210. Recommended Closer Size
Installation Instructions For Non-Hold Open or A Hold Open Arm Option DC3200 Series Multi-Sized thru 6 Regular Arm Universal Door Closers Parallel Arm Jamb Mount See pages 2&3 See pages 4&5 See pages 6&7
More informationMetal Sound Retardant Door Hardware Information Bulletin
574 West Otterman Street Greensburg, PA 15601 Toll Free: (800) 979-7300 Local: (724) 834-7300 Fax: (724) 830-2871 Email: overly@overly.com DOOR COMPANY Metal Sound Retardant Door Hardware Information Bulletin
More informationINSTRUCTIONS FOR HIT TEMPLATE FOR SARGENT MORTISE LOCKS
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-272 TEMPLATE FOR SARGENT MORTISE LOCKS WHEN USING POWER TOOLS ALWAYS
More informationIntroduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5
88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...
More informationInstallation Instructions for 45HW & 47HW Electrified Mortise Locks
Installation Instructions for 45HW & 47HW Electrified Mortise Locks Contents These installation instructions describe how to install your 45HW & 47HW Electrified Mortise Lock. Topics covered include: Finishing
More information7210 Surface Vertical Rod Exit Device Installation Instructions. Outside Trim
7210 Surface Vertical Rod Exit Device Installation Instructions Top Mounting Plate (2) 1/4-20 x 3/4" PFHMS Blade Stop Block Shim (2 Supplied) Strike Plate 791 Strike (3) 10-24 x 1-1/4" PFHMS Top Latch
More information4 BAY Low Profile-Dual Displays WALL MOUNT CABINET
D1/347M2 SSEMLY INSTRUTIONS 4 Y Low Profile-Dual Displays WLL MOUNT INET TIP HZRD WRNING! abinet must be affixed to wall. For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions
More informationPacking List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models
9500 Series Installation Instructions Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models Regular Pages 5 & 6 Parallel Pages 7 & 8 Top Jamb Mount Pages 9 & 10 IMPORTANT: An improperly installed or
More information1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
More informationMONOGRAM 48" BUILT-IN SIDE-BY-SIDE REFRIGERATOR
MONOGRM 48" UILT-IN SI-Y-SI RFRIGRTOR STION 1 STNR INSTLLTION 1/4" FRM PNLS 3/4" OVRLY PNLS STION 2 FLUSH INST INSTLLTION STNR INSTLLTION 25 1/2" (64.8) 48" (121.9) 23 7/8" (60.7) 1 3/4" (4.4) *84" (213.4)
More informationProduct Guide. An Introduction to Hollow Metal Terminology and CURRIES Product. ASSA ABLOY, the global leader in door opening solutions
Product Guide An Introduction to Hollow Metal Terminology and CURRIES Product in door opening solutions CURRIES CURRIES Company of Mason City, Iowa is pleased to introduce you to Basic Hollow Metal Terminology.
More informationConcealed Shallow tab 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening (.252) 2 PL. Receptacle panel. Latch. panel Ø13 (.
22 R2 Draw Concealed Shallow tab High tensile Suited for thin panels Ø 5 (.196) (.).3 (.6).5 Average ultimate tensile : *13.5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
More informationInstallation Instructions. Oakmont Folding Doors
Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free
More informationINSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY
More informationSECTION FINISH HARDWARE
SECTION 08710 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation necessary to provide Finish Hardware as shown and detailed on the Drawings
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationINSTRUCTIONS FOR HIT LOCK MORTISER
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-200 LOCK MORTISER WHEN USING POWER TOOLS ALWAYS WEAR EYE AND EAR
More informationElectric Strikes Instructions
Installation S84/86 Series lectric Strikes Instructions The S84/86 electric strikes include two profiles: The S84 (Low Profile) version features a 1-1/16 body, accepts 1/2 or 5/8 latch projection, and
More information