The Tyntesfield Lathe
|
|
|
- Kristina Leonard
- 6 years ago
- Views:
Transcription
1 The Tyntesfield Lathe In 2003 a party of ornamental turners and their guests visited Tyntesfield, a country house near Bristol. We were privileged to see the house in the original state in which it was acquired by the National Trust. The house had been about to be sold; the wonderful contents were all labelled with Christies Lot numbers and the sale of these was imminent. Fortunately the National Trust stepped in at the last moment and saved the complete collection for posterity. William Gibbs ( ) was a businessman and religious philanthropist. He made his fortune from importing guano (bird droppings) from Peru. This was a valued product, used as fertiliser, and it commanded very high prices in Europe and North America. By the 1850s the Gibbs firm made profits from this trade amounting to between 80,000 and 100,000 per year, of which William received a share of between 50% and 70%. His great wealth enabled him to buy Tyntesfield, a fine country house near Bristol, which he had remodelled and enlarged. He also bought adjoining land until, at its peak, the estate covered more than 6000 acres. Tyntesfield (photograph courtesy of the National Trust) On William s death the estate passed to his son Antony ( ). Like many wealthy men of his generation, Antony took up the hobby of ornamental turning and in 1872 he bought from Holtzapffel and Co., London, a pre-owned lathe, Serial No.1890, together with a comprehensive outfit of accessories for the princely sum of (equivalent to about 3 years income for a skilled man). This lathe had been sold originally in 1852 to Count Dunin for It was later returned to H & Co., and resold in 1861 to Sir A.Sterling Kt. It was then returned for a second time to H & Co., completely overhauled and resold again on 5th January 1872 to Antony Gibbs. Antony was a talented ornamental turner as evidenced by several pieces of his work that remain among the collections at Tyntesfield. On Antony s death the lathe passed to his son, Antony Hubert Gibbs of Pytte, Clyst St.George, Topsham, Exeter, Devon. It was sold eventually at an auction of the Gibbs estate. There are two conflicting stories here: one states that the lathe was sold from Gibbs s London house in Ealing in 1922 to David Kyle of Brentford and subsequently to John Marsh Burns of Bexhill-on-Sea; the second story is that it was bought at a house sale from Clyst St.George, c.1953 by a Devonshire gentleman. It was later inherited by his son, who subsequently moved the Scotland where it languished for the next 60 years, unused in a store room. It was rescued in 2014 by the writer, who cleaned and overhauled it; and in 2017 it was returned to its former home at Tyntesfield where it would normally have stood in the small Lathe Room. However, to make it more accessible for public viewing it has been placed in the Billiard Room. The following pages contain photographs of the lathe outfit in its new home, ornamental items turned by the late Antony Gibbs, the lathe in various set-ups, the cabinet with every accessory contained within, the triptych cabinet of hand tools, the treadle grinding machine and a complete inventory of the outfit. John Edwards
2 2 Pride of place in the Billiard Room
3 Ornamental objects turned by Antony Gibbs Pair of ivory candlesticks Ivory Pomander Pair of blackwood & ivory candlesticks Ivory Pot Rhino Horn Pot Pair of ivory tazzas 3
4 The lathe 4
5 The cabinet 5
6 Accessories 6
7 Top tier of the cabinet and three upper drawers. Drawer 1 containing ivory & blackwood offcuts, test pieces and failures. Drawer 2 containing small pieces of hardwood. Drawer 3 containing Saw blade and spindle; bell punch (2); Ring Carrier & Heart Carrier (3) for Driver Chuck; Oilcan and sundry items. 7
8 Eccentric Chuck Ellipse Chuck Rectilinear Chuck Dome Chuck 2-Jaw Universal Chuck with Cross-handle Key Bennett s Die Chuck 8
9 Work-holding Chucks: Cup Chucks (8); Spring Chucks (12); Mandrels (2) & Wire Chucks (3) with screw-hole Receptacle Chuck; Driver Chuck; 2-jaw Die Chuck; Prong Chuck; Hollow Screw Chuck with 6 screws; Worm-screw Chuck (2); Receptacle Chuck (2); Prong Chuck; Square-hole Chuck (3); Bayonet Chuck for Boring Bits. Ring Carrier & Heart Carriers for Driver Chuck 2-jaw SC Chuck 3-jaw SC Chuck Small 3-jaw SC Chucks (pair). Large 4-jaw Independent Chuck 9
10 Drawer 4 - Boxwood Chucks etc. Arm-rest Set of Chuck-making Tools Ivory & hardwood test pieces & failures 10
11 Spiral Apparatus Pedestal & Arbor for Surface Spirals Dividing Chucks, rear and front mounting 11
12 Drawer 3 - Cutting Frames & Cutter Bars Long Internal Cutting Frame Internal Cutting Frame Extension Tool-holder Boring Bars (2) Geared Universal Cutting Frame with height adjustment by Evans 12
13 Gouge Cutter Bar Steel Spacer Plate Screw-thread Cutter Bar Eccentric Cutting Frame Right-angle 3/8 Tool-holder Universal Cutting Frame Baker type by Evans Vertical Cutting Frame - inboard type Mandrel Nose on 9/16 Shank Vertical Cutting Frame - outboard type 13
14 Ellipse Cutting Frame in mahogany chest. Slope top mahogany chest. of Cutters & drills Chest of Cutters & Drills comprising:- 180 Slide-rest tools with honing adapter & right-angle adapter, 137 ECF tools, 26 short UCF tools & 139 drills with matching Drilling Spindle & honing guide, Pad handle and a Scribing Knife. 14
15 Horizontal Cutting Frame with 3 brass pulleys and set of 36 medium length cutters, in fitted mahogany chest 15
16 Drilling Spindle with set of 55 drills & honing guide in fitted mahogany chest 16
17 17 Boring Collar, Slender Turning Guide & Stand.
18 Saw-bench. Lathe with Saw bench 18
19 18 Ornamental Turning Slide-rest by Evans with tool-boat, steel plate, pair of tool-clamps, guide & stop screws, bridle, hand-lever, sector plate for cutting around curves, pair of fluting stops, connection to spiral apparatus with overhead drive and automatic cut-out, winch handle & key; Cradle, Clamp & Bow-nut. 19
20 Superior 18 Ornamental Slide-rest by Evans; with sector plate for cutting around curves, tool-boat, steel plate, pair of clamps, guide & stop screws, bridle, pair of fluting stops, key, winch handle and automatic driving gear, Cradle, clamp, bolt & bow-nut. Cradle for O T Slide-rest Spiral-Spherical Sliderest made by Evans; with tool-boat, steel plate, set of 3 clamps, guide & stop screws, bridle, pair of fluting stops, key, 4 winch handles, bolt & bownut. 20
21 The lathe shown here with Spherical Slide-rest by Evans. 21
22 Star-nut & set of 6 Screw-thread Guides Counting Index 22
23 Rare Screw-mandrel Headstock with internal planetary gears allowing 1:4 speed reduction, with segment wheel & stops, tangent screw and wheel with 180 teeth, adjustable index, counting index, silver-plated division plate with 6 rows of divisions: 360, 192, 144, 112, 96 Star-nut and set of 6 screw-thread guides, fittings for both front and rearmounting spiral apparatus and fitting for rear-mounting compensating index. Shown here with Eccentric Chuck with ratchet nose-wheel. Pair of Segment Stop Pins Latched Un-latched Headstock with Eccentric Chuck 23
24 Compensating Index for equal division of the Ellipse. Designed by Evans but this one is unusual in that it was made by Holtzapffel & Co. 24
25 The lathe with rear mounting Spiral Apparatus The lathe with front mounting Spiral Apparatus 25
26 Double-ended Calliper Set Bevel Height Standard. Set Square Flat Steel Square Tailstock Barrel Ejector Backed Steel Square Measuring Instruments etc. 26
27 Treadle Grinding & Lapping Machine. Mahogany frame with flywheel, crank, treadle & hook; backboard poppit with cone bearing, spindle with 4 grinding wheels, water trough and tailstock; horizontal lapping machine with 3 laps; Goniostat and Honing Guide for round-nosed tools on honing board with oilstone, brass & iron laps. 27
28 Outfit for honing Bead tools in fitted mahogany chest. Honing Guide for round-nosed cutters. Goniostat 28
29 Mahogany Triptych Cabinet of Hand-turning Tools. Polishing outfit with 2 (of 3) brushes & abrasive powders for honing cutters 29
30 Set of Holtzapffel Taps & Dies in fitted mahogany chest. 30
31 Polishing outfit with Dutch Rush, polishes & powders 31
32 Inventory of Ornamental Turning Lathe No & Accessories by Holtzapffel & Co., Iron bed on double mahogany frame with flywheel & treadle assembly Mahogany under-bed chest of 3 Drawers Internally-geared Screw-mandrel headstock 5"centre height with tangent screw on 180-tooth Wormwheel with segment pillar, stops and stop-pins, adjustable Index, star-nut assembly & set of 6 screw-thread guides Screw-barrel tailstock with drill-pad, male, female & cutting centres and barrel-ejector Double standard overhead by Evans with 2 bronze pulleys & Crane Handrest pedestal & 4 tees Boring Collar & stand Slender turning guide Set of Ornamental Chucks in Fitted mahogany chest:- Rectilinear, Eccentric, Ellipse with Cam-ring & Dome Compensating Index for equal division of the ellipse in mahogany chest; and Counting Index Dividing Chuck (2); one for front and one for rear-mounting Spiral apparatus with set of 16 change-wheels, Radial Arm, Long Arm, 3 Arbors, sundry washers & spacers and drive shaft with Universal joint Surface Spiral apparatus with Pedestal; 2 Round-edge & 2 Bevil gears Atkinson's Reciprocator Saw-bench with adjustable fence, square hole chuck, spindle and blade by Holtzapffel 9" Universal 2-jaw Chuck 3-jaw S.C. Chuck - modern type Pair of small 3-jaw S.C. Chucks 4-jaw independent Chuck large 4-jaw independent Chuck - modern type Work-holding Chucks: 8 Cup Chucks; 12 Spring Chucks; 2 Mandrels & 3 Wire Chucks with screwhole Receptacle Chuck; Driver Chuck; 2-jaw Die Chuck; Prong Chuck; Hollow Screw Chuck with 6 screws; 2 Worm-screw Chucks; 2 Receptacle Chucks; Prong Chuck; 3 Square-hole Chucks; Bayonet Chuck for Boring Bits; 27 boxwood chucks; 18 Ornamental Slide Rest by Evans, with guide & stop screws, tool-boat, steel spacing plate, pair of tool clamps, hand-lever, crank handle, key, fluting stops, sector plate for curved work, auto drive from Overhead, curvilinear template bar, 4 templates & rubber (lacking standards); Spherical Slide Rest by Evans with guide & stop screws, tool-boat, steel spacer plate, pair of tool clamps, hand-lever, key and 4 crank handles. Cutting Frames: Horizontal Cutting Frame in fitted mahogany chest with set of 36 large cutters, 3 pulleys & spanner Vertical Cutting Frame (inboard pulley type) with 2 pulleys Vertical Cutting Frame (outboard pulley type) Internal Rotary Cutting Frame Long Internal Horizontal Cutting Frame Eccentric Cutting Frame Universal Cutting Frame (Evans geared type with height adjustment) Universal Cutting Frame (Evans Baker type) Ellipse Cutting Frame with change gears for 4-looped figures, in mahogany chest Right-angle tool-holder for 3/8 square tools Extension tool-holder Cutter Bar for screw-thread cutting (with adjustable helix angle) Turner's Bevil Turner's Square 32
33 Steel Square Flat Steel Square Double-ended Callipers Standard Gauge for measuring Centre height and eccentricity from Centre set of Holtzapffel Taps & Dies in fitted mahogany box Slope-topped mahogany chest of cutters containing:- 180 Slide-rest tools with honing adapter & rightangle adapter, 137 ECF tools, 26 short UCF tools & 139 drills with matching Drilling Spindle & honing guide, Pad handle and a Scribing Knife. Drill Spindle with 55 drills and honing guide in fitted mahogany chest Mahogany Triptych wall cabinet containing 75 hand tools Goniostat with honing board and brass, iron and oilstone laps and 3 tins of powders in mahogany box Honing Guide for round-nosed cutters Mahogany chest containing outfit for honing bead cutters Treadle Lapping & Grinding Machine on double mahogany frame with flywheel, crankshaft, treadle & hook; with spindle of 4 grindstones (one with water trough); horizontal lapping turntable with set of 3 laps; Polishing kit with 5 bottles & 5 tins of lacquers and polishing compounds and a quantity of Dutch Rush in fitted mahogany chest. John Edwards
Comprising: Iron bed on double mahogany frame with original Shepherd's Crook Overhead and additional modern ceiling-mounted overhead with variable
FOR SALE: Perhaps the finest, and one of the most complete and original of the rare Ornamental Turning & Rose Engine Lathes equipped with Budd s Rose Chuck and Pumping Apparatus: this example, No.2453,
RECENTLY SOLD ITEMS (Jun 2013)
RECENTLY ITEMS (Jun 2013) Cup Chuck 3 inch capacity un-numbered. Could be adapted to a backplate or a flange chuck Lot 7 25 or Start bidding at 20 at 20 Lot 9 Cup Chuck 1.5 inch capacity un-numbered 15
For Sale. Ornamental Turning Lathe No made in 1873 by Holtzapffel & Co.
For Sale Ornamental Turning Lathe No. 2283 made in 1873 by Holtzapffel & Co. Provenance: Listed in H & Co s Register on 20th February 1873 as sold for 200 to Lord Lindsay of 47 Brook Street, London, W.
REGISTER OF EVANS LATHES
REGISTER OF EVANS LATHES Un-numbered The 5 Common headstock casting is engraved EVANS & SON and has, unusually, an iron division plate (possibly a replacement as it is not engraved with the maker s name,
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
Lathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
Precision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
The new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT
PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
Useful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
Turning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
SECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
Build a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
TIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
TURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
SECTION 9: PARTS. Electrical Box. (0000 Series Parts) 0000 Series Parts List
SECTION 9: PARTS Electrical Box (0000 Series Parts) 0000 Series Parts List 1 P04920001 CONTACTOR 6 P04920006 FUSE 2A (LC1-D0910, B5, 24V, 50HZ) 7 P04920007 FUSE HOUSING 2 P04920002 CONTACTOR 8 P04920008
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
PARTS G9729 Lathe Bed
PARTS G9729 Lathe Bed 114 132 126 125 131 133 129 128 130 127 139 124 10 124 123 122 135 137 147 144 121 148 146 149 136 138 140 150 152 142 143 141 151 153 21 168 20 19 18 17 162 22 147 13315 14 13131
Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
SECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
7x --Tailstock Cam Lock
7x --Tailstock Cam Lock By Magic Brian magicbrian40@yahoo.com Probably the most pleasing mod to have, but often not done through lack of milling facility s This version does NOT require a mill. MATERIALS
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
I 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
ROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
SECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
SECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
SECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
BASE, COLUMN, ARM AND TABLE
SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the
SECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
Vertical Steam Engine from barstock
Vertical Steam Engine from barstock By Thor Hansen After having built several small oscillating steam engines and Rudy Kouhoupt s Walking Beam engine I decided to have a go at a slide valve engine. My
MODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
Headstock PARTS -61- REF PART # DESCRIPTION REF PART # DESCRIPTION
For Machines Mfg. Since 8/11 Headstock Model SB1001 8K Lathe 3 2 1 43 46 4 5 6 8 7 47 48 49 11 10 11 9 13 12 14 15 16 17 18 19 44 45 42 41 40 39 38 37 36 34 33 32 15 20 21 22 23 24 25 26 27 28 29 30 31
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Making Cam Action Edge Clamps, version 2 *
Making Cam Action Edge Clamps, version 2 * By R. G. Sparber 01/15/2008 Copyleft protects this article. The idea of making these clamps came from Brian Lamb. They work great. If you have more money than
UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
ME MANUFACTURING TECHNOLOGY LABORATORY-I VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI LAB MANUAL
VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI 636 703 ME 6311 - MANUFACTURING TECHNOLOGY LABORATORY-I REGULATION 2013 LAB MANUAL BRANCH YEAR / SEM MECHANICAL ENGINEERING II YEAR & III SEMESTER D
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
Building a vertical wobbler
Building a vertical wobbler I wanted to build a simple steam engine that would also run on compressed air. At Chris Heapy s website (http://easyweb.easynet.co.uk) I found drawings of a small double acting
» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
2014/2015/2016. The Stuart Half Beam Engine
2014/2015/2016 The Stuart Half Beam Engine Ian s Home Projects 11/20/2014 The Stuart Turner Half Beam Casting Kit 1 The Stuart Half Beam Engine Table of Contents The Stuart Turner Half Beam Casting Kit...
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
8.10 Drill Grinding Device
8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed
VB36 SHORTBED.TAILSTOCK
VB36 SHORTBED.TAILSTOCK (Principal Components) PART REF. SBT 1 SBT2 SBT3 SBT4 SBT5 SBT6 SBT7 SBT8 SBT9 DESCRIPTION Tailstock Body Casting Taper Block Handle Bracket Han41eLink Handle Bed Tube Tailstock
Turning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
Swing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8"
MODEL KL1640 PLUS Swing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8" Spindle speed L:50-355 rpm, H:352-2500 rpm Spindle number 2 Spindle
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
Other Lathe Operations
Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady
EEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
Taig Lathe Instruction Booklet 03J71.00
Page 1 of 12 Taig Lathe Instruction Booklet 03J71.00 1. Specifications Center Height: 2.250" Distance Between Centers: 9.75" Recommended Motor: 1/6 to 1/4 hp, 1725 rpm, 1/2" arbor Accuracy:?.001" Spindle:
Machine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
1951 SB 9 x 4 ½ Model A. Originally sold to a tool and die shop In Leominster.
1951 SB 9 x 4 ½ Model A Originally sold to a tool and die shop In Leominster. It then spent 30 years in a auto repair shop cutting commutators on Truck generators pretty grungy.. Stuff!. FIRST THING stevewb
Student, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
Machines. 6/16 Kenworth Place, BRENDALE Ph Fx RT-060S. Horizontal / Vertical Rotary Table INSTRUCTION MANUAL
RT-060S Horizontal / Vertical Rotary Table INSTRUCTION MANUAL Horizontal / Vertical Rotary Table - Instructions There are three methods of setting positions using a rotary table. 1. Use the degree scale
Section J DISTRIBUTOR
Section J DISTRIBUTOR 1J 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 Turn Plate (right-hand) 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor Frame Complete 5. 47-090547-004
STEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
VARIABLE SPEED BECH LATHE
VARIABLE SPEED BECH LATHE Instruction Manual Please read this instruction manual thoroughly and follow all directions carefully. 1 Important Safety Instructions READ ALL INSTRUCTIONS AND WATNINGS BEFORE
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
Column & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
Lathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
2 Cylinder Slidevalve Steam Engine
2 Cylinder Slidevalve Steam Engine By Thor Hansen After making a slide valve engine that I managed to get running I decided to try and make a 2-cylinder version. Since the first one was a vertical steam
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()