AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet.

Size: px

Start display at page:

Download "AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet."

Corey Sharp
5 years ago
Views:

1 Small fitting, great convenience Technical data sheet

2 Order specification 2 1 8a 8b well suited for wall cabinets and larder units cabinet heights of 20 to 00 mm Interior depth of 12 mm minimum closes silently and effortlessly in conjunction with CLIP top BLUMOTION hinges can be combined with TIP-ON to open handle-less fronts Well-balanced quality of motion due to light operating forces, a variable stop and BLUMOTION Simple and predominantly tool-free assembly and easy adjustment Symmetrical lift mechanism can be used on one or two sides High-quality design Power factor LF = cabinet height KH (mm) x front weight incl. double handle weight (kg) Standard TIP-ON LF LF K101 20K101T 20K K101 20K1101T 20K101T LF LF LF LF Lift mechanism one-sided LF Power factor Lift mechanism one-sided LF Power factor Note: the power factor is doubled when used on two sides A trial application is recommended when you are in a borderline area of the individual lift mechanism. 1 Symmetrical lift mechanism 1 Power factor K K K101 Symmetrical lift mechanism Power factor K1101T 20K101T 20K101T Opening angle 10 * Opening angle 10 * * For hinges with smaller opening angles, these are limited by the hinges. 2

3 Order specification 2 Cabinet fixing TIP-ON Nickel plated steel Nylon 20K101 SW, PG, TS ) 20K11 For drilling EXPANDO 20K1E1 Short version, length: 0 mm Front fixing bracket Nickel plated steel Horizontal adapter plate 1) 20K101 Nylon, screw-on 20K11 SW, PG, TS ) EXPANDO 20K1E1 Short version Narrow aluminium frames 20K101A Recommended hinges 2) 8a Screw-on catch plate CLIP top BLUMOTION 110 Steel, nickel plated With spring 1B0 Ø 1 mm S INSERTA With spring With spring 1B80 1B90 For hard surfaces and/or MDF, Ø 2. mm pre-drilling and countersinking, if required CLIP top 110 for TIP-ON Unsprung 0T0.TL Unsprung 0T80.TL 8b Press-in catch plate ) INSERTA Unsprung 0T90.TL Steel, nickel plated Ø 11. mm Recommended mounting plate Pre-drilling Ø mm D Standard mounting plates, spacing depends on the top gap Fixing Spacing 0 mm 1H100 Bit PZ cross slot 0 mm 1H100 Size 2, length 9 mm BIT-PZ KS2 EXPANDO 0 mm 1H100E Accessories CLIP top BLUMOTION 110 /CLIP top 110 Hinge arm cover cap Hinge boss cover cap Hinge boss spacing Print/Stamp Part No. 1. mm Screw-on Plain 0.10 CLIP top BLUMOTION 0T0 CLIP top BLUMOTION 0T0.21 Stamped Blum 0.10.BP CLIP top 0T0 Opening angle stop 8 Chipboard screws Insertion ram Nylon Black 0T. x 1 mm Boss. x 1 mm Nylon MZM.000 1) Use 2 chipboard screws (09.1x00) for wooden fronts. Use 2 countersunk self tapping screws (0.090) for wide alu frames 2) As an alternative, you can also use CLIP top BLUMOTION hinges, 9 profile door hinges, 9 aluminium frame hinges or CLIP top 10 or 110 hinges, 9 profile door hinges, 9 aluminium frame hinges combined with clip-on BLUMOTION 9A or unsprung (TIP-ON). See Blum catalogue. ) SW silk white, PG platinum grey, TS terra black ) Note: the glue-on catch plate should not be used in combination with TIP-ON for AVENTOS HK-XS. * Number of hinges, see front assembly

4 2 FAo 12+D+K (12+D+K) FAo 12.+D+K (11.+D+K) D+K SOB min LH = 200 H AVENTOS HK-XS Planning Cabinet positions for lift mechanisms Space requirement Space requirement () min 12* 2 (min 100*) H = 1 + D + K + SOB D mounting plate spacing LH Internal cabinet height Y = (FH - a) x 0. K Hinge crank * min. 200 mm with visible wall hanging bracket FD (mm) Horizontal hinge arm 0 mm a (mm) 2 1 Cranked hinge arm 9. mm FD Front thickness Double cranked hinge arm 18 mm FH Front height SOB Top panel thickness Front assembly Planning for narrow aluminium frames Narrow aluminium frames Wooden fronts and wide aluminium frames 1) Ø. x 1 mm FAo Upper front overlay SFA Side front overlay Number of hinges hinges starting at cabinet width 900 mm and/or power factor hinges starting at cabinet width mm and/or power factor ) Use 2 chipboard screws (09.1x00) for wooden fronts. Use 2 countersunk self tapping screws (0.090) for wide alu frames For frame frieze width 19 mm: SFA of mm possible SFA R SFA Side front overlay Radius * When changing material thickness, adjust the assembly dimensions accordingly. ( ) Special drilling positions for a minimum internal depth of 100 mm To ensure optimal motion, use standard drilling positions for a minimum internal depth of 12 mm

5 Planning Cornice and crown moulding clearance Minimum gap CLIP top BLUMOTION 110 / CLIP top 110 FD (mm) MFu Minimum gap at the bottom (1. mm) F Gap X (mm) FD Front thickness 2 1 MFo Minimum gap at the top depending on hinge used see Blum catalogue FA Front overlay TB Drilling distance Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory setting for CLIP top BLUMOTION 110 / CLIP top 110 Drilling distance TB Front thickness FD Additional for + 2 mm side adjustment A trial application is recommended CLIP top BLUMOTION 110 / CLIP top 110 Drilling distance TB Front overlay FA Mounting plate

6 TIP-ON planning Fixing position TIP-ON short version Horizontal adapter plate short Installation dimensions TIP-ON Short version Horizontal adapter plate short * min..2 mm with press-in catch plate Factory setting = 2 mm Screw-on catch plate planning For drilling Inline adapter plate FAu = Lower front overlay * We recommend setting back the positioning of TIP-ON by mm for the screw-on catch plate. Note: the glue-on catch plate should not be used in combination with TIP-ON for AVENTOS HK-XS. Press-in catch plate planning For press-in Inline adapter plate FAu = Lower front overlay

7 Assembly devices Front assembly Front fixing bracket Hinges Hinges Universal drilling template ECODRILL Drilling template for hinges ZML.000 M Ø 8 mm / Ø 2. mm.09a Drilling template for hinges Ø 2. mm.0a Cabinet assembly Cabinet assembly Mounting plate TIP-ON assembly Universal-single template Template TIP-ON drilling template For drilling.010 Can also be used for cabinet fixing Can also be used for TIP-ON for AVENTOS

AVENTOS HK-XS. Small fitting, great convenience.

AVENTOS HK-XS. Small fitting, great convenience. AVENTOS HK-XS Small fitting, great convenience www.blum.com 2 Small fitting high quality AVENTOS HK-XS is the compact fitting for small stay lifts in high and wall cabinets. Thanks to the narrow style,