Machines and assembly aids. Devices to efficiently install Blum hardware

Size: px
Start display at page:

Download "Machines and assembly aids. Devices to efficiently install Blum hardware"

Transcription

1 Machines and assembly aids Devices to efficiently install Blum hardware

2 Table of contents Application Chart MINIPRESS Drawer BOX Assembly Cabinets Hinges Runners Systems Fittings Page 4 MINIDRILL 6 Machine accessories 8 MINISTICK 9 Julius Blum, Inc. is a leading manufacturer 7 and 8-spindle boring heads 10 of functional hardware for the cabinet and furniture industry specializing in concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make casegoods functional are available within the wide range of lifetime guaranteed Blum products. MINIPRESS Insertion rams EcoDrill EcoJig INSERTA drilling jig Blum s manufacturing and distribution complex in Stanley, North Carolina supplies the North American markets through a network of more than 150 dependable distributors. Wholly owned by the Blum family, the company was formed in 1952 by Julius Blum and is headquartered in Hoechst, Austria. PlateMate drilling jig Mounting plate drilling jig QUICKFIX Cabinet profile drilling jig Global customer benefits MINIFIX 17 Product development Universal drilling jig 18 at Blum considers all of the various customers who will come in contact with our products. With this Global Customer Benefits philosophy we strive to create advantages for all users from the cabinetmaker to the end consumer. TANDEM drilling jig Piloting bit Corner post drilling jig METABOX knock-in tools Drawer front marking gauges Drawer front adjuster center point 22 Julius Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. METABOX layout templates System DYNAPLAN software Index

3 Assembly and processing of Blum hardware systems Machines Assembly aids DYNAPLAN MINIPRESS Drawer front marking MINIDRILL DYNAPLAN is a software program for determining the size of door and drawer components and where to mount them. Three planning modes enable different scenarios for the same cabinet in either space or production optimization. EcoDrill Blum machines are designed for efficient: - Drilling of the Blum hinge boring pattern - Line boring of cabinet sides - Door and front assembly - Cabinet assembly Quick setup times and simple handling are the most important features of Blum drilling and assembly machines. Adjustable drilling gauge Blum makes devices for precise marking and drilling of fixing positions for Blum hardware systems. - Drilling jigs - Marking gauges - Layout tools - Knock-in tools DYNAPLAN calculates information for these Blum hardware systems: - METABOX - TANDEMBOX - TANDEM - SOLO - STANDARD runners page 14 - CLIP and MODUL hinges page

4 MINIPRESS Vertical drilling and hardware insertion machine The MINIPRESS is a simple and efficient machine designed to drill for and where applicable, insert the following components: - Hinges and mounting plates - METABOX and TANDEMBOX front fixing brackets - Assembly fittings - mm line boring Blum hinge boring pattern 9.5 Ø35 45 Ø8 MINIPRESS features Y X The Blum hinge pattern One position of the drilling head is dedicated to the three-hole Blum hinge boring pattern. 5 spindle swiveling drilling head Multiple patterns are achieved by turning the drilling head 90. (See page 5) Precise ruler and fencing system Preset depth positions and adjustable fence stops make setups simple. X Y Insertion of Blum components Blum hinges and fittings are efficiently inserted into the working piece. Subject to technical modifications without notice spindle drilling head accessory For efficient mm line boring. (See page 10) 4 Accurate settings The X and Y coordinates for hinge drilling are easily set with the fence and stops.

5 MINIPRESS Specifications MINIPRESS includes: - Center ruler - Work table - (2) narrow ruler stops - (1) insertion ram (of your choice, see page 11) - (2) fixed drilling depth stops - Tool kit Features: - 5 spindle swiveling drilling head - Pneumatic moisture trap - Adjustable stroke controls - Adjustable fencing system - Drilling depth adjustment - Pneumatic hold down clamps - Swing arm for insertion ram - Dust evacuation jet See page 11 for insertion rams MINIPRESS 220 volt / single phase MINIPRESS 220 volt / three phase MINIPRESS 440 volt / three phase M51N1053*US M51N1004*US M51N1005*US Drilling configurations At hinge pattern position At boring-line position Blum Hinge Pattern TANDEMBOX and METABOX 0N front fixing brackets 3-hole line-boring and METABOX C-15 drawer parts METABOX 0/330 M, K and H front fixing brackets Safety shield removed for clarity 5 Subject to technical modifications without notice. 2000

6 MINIDRILL Vertical drilling machine for Blum hardware The MINIDRILL is designed to offer manufacturers a fast, cost efficient and accurate method of drilling cabinet components for the following Blum hardware systems: - CLIP, MODUL, COMPACT and MAXUS hinges - METABOX and TANDEMBOX front fixing brackets - METABOX C-15 drawer components - 3-hole line boring of cabinet sides Blum hinge boring pattern 9.5 Ø35 45 Ø8 MINIDRILL features Y X The Blum hinge pattern One position of the drilling head is dedicated to the three-hole Blum hinge boring pattern. 5 spindle swiveling drilling head Multiple patterns are achieved by turning the drilling head 90. (See page 5) Precise ruler and fencing system Preset depth positions and adjustable fence stops make setups simple. X Y Front fixing bracket installation TANDEMBOX or METABOX front fixing brackets are easily installed after fixing holes are drilled. INSERTA Hinge assembly After drilling the fixing holes, Blum hinges and mounting plates with INSERTA mounting are simply attached without tools. Accurate settings The X and Y coordinates for hinge drilling are easily set with the fence and stops. Subject to technical modifications without notice

7 MINIDRILL Specifications MINIDRILL includes: - Center ruler - Work table - (2) narrow ruler stops - (2) fixed drilling depth stops - Tool kit Features: - 5 spindle swiveling drill head - Pneumatic moisture trap - Adjustable stroke controls - Adjustable fencing system - Drilling depth adjustment MINIDRILL 220 volt / single phase MINIDRILL 220 volt / three phase M51N M51N Drilling configurations At hinge pattern position At in-line position Blum Hinge Pattern TANDEMBOX and METABOX 0N front fixing brackets 3-hole line-boring and METABOX C-15 drawer parts METABOX 0/330 M, K and H front fixing brackets Safety shield removed for clarity 7 Subject to technical modifications without notice. 2000

8 MINIDRILL and MINIPRESS accessories Accessories Center ruler Narrow ruler stops Center position indicator Ruler stops Extension ruler support Work table Extension ruler Fixed drilling depth stop Insertion of fixed drilling depth stops Work table Center ruler, 600mm Extension ruler, length 1250mm Extension ruler support Narrow ruler stop, left or right Ruler stop Center position indicator Fixed drilling depth stop for 13mm (1/2") MZA.1000 M MZL.1250.US MZV.1000 MZS.2000 L+R MZS.1000 MZR.2000 M Drill bits Ø5mm Ø8mm Ø10mm Ø10mm with countersink Ø35mm 10mm shank chuck for 1/8" bit LH 1/8" twist drill bit Ø5mm, right hand Ø5mm, left hand Ø8mm, left hand Ø10mm, right hand Ø10mm, left hand Ø10mm with countersink, right hand Ø10mm with countersink, left hand Ø20mm, right hand Ø25mm, right hand Ø35mm, right hand Ø10mm shank chuck for 1/8" bit with wrench Ø1/8" left hand twist drill bit M01.ZB05.D2 R M01.ZB05.D3 L M01.ZB08.03 L M01.ZB10.02 R M01.ZB10.03 L T108-10mm R T108-10mm L M01.ZB20.02 R M01.ZB25.02 R M01.ZB35.02 R DB-10X1/8 DB-1/8 Subject to technical modifications without notice

9 MINISTICK For processing drawer fronts - Enables process drilling for the front fixing brackets of Blum s METABOX and TANDEMBOX drawer systems - For METABOX C15 bottom and back drilling - Drawer fronts using various runner heights (with or without gallery) can be drilled - Suitable for the following drawers: TANDEMBOX 358N and M METABOX 0N, M, K, H METABOX 330M and H MINISTICK MZS.0040 Example application using MINISTICK for METABOX Upper stop MINISTICK Bottom stop M K H Upper drawer front Y + OL Y Bottom drawer front MINISTICK components: R & L MINISTICK, (2) upper and (2) lower stops Each MINISTICK has 5 retractable stop pins used for the various drawer heights The front fixing bracket holes are located. Bottom drawer fronts are usually different. Bottom stop Y Upper stop OL Begin setup for upper drawers first. Position MINISTICK at 'Y' distance plus mm. Next, install the upper drawer stop and secure it to the ruler. Secure the bottom stop at a distance equal to the bottom drawer overlay Y Y + OL Drill all upper drawer fronts. Use pin #1 for M, pin #3 for K and pin #4 for H drawer heights. To drill bottom drawers, loosen the knob and move the MINISTICK to the bottom stop. Drill the bottom drawer fronts in the same manner as the upper drawer fronts. 9 Subject to technical modifications without notice. 2000

10 7-spindle and 8-spindle boring heads For production line boring with the MINIPRESS 7-spindle boring head features: - Drills (7) holes, spaced mm apart, parallel to fence - Retractable index pins located on both sides permit continuous boring - Easily mounts to the MINIPRESS 7 spindle boring head MZK.1000*US Drill bits required (order separately) (4) Ø5mm right hand drill bits (3) Ø5mm left hand drill bits M01.ZB05.D2 R M01.ZB05.D3 L Both boring heads include: - Setup jig - Distance spacer for MINIPRESS stroke depth 8-spindle boring head features: - Drills (8) holes, spaced mm apart, perpendicular to the fence - Drills for all METABOX and TANDEMBOX front fixing brackets and galleries - Drills cabinet side panels for all Blum runner systems (except SOLO) on lengths 381, 457 and 533mm 8 spindle boring head MZK.8000*US Specifications 7-spindle boring head 8-spindle boring head Locator pin Locator pin RH LH 224 L RH LH L Subject to technical modifications without notice

11 MINIPRESS insertion rams For hinges 107, 110 and 125 hinges 100 and 95 thick door hinges 37 diagonal hinges 170 steel cup hinge Blind corner hinge Bi-fold hinge COMPACT 33, 38 and 39 series hinges MAXUS M8930 hinge cup MZM.0010 MZM.0011 MZM.0019 MZM.0018 MZM.0019 MZM.0021 MZM.0037 MZM.0088 For hinge mounting plates Press-in mounting plates 177M51x0 / 177H51x0 50 MZM.0050 For METABOX front fixing brackets ZSF.1300 / ZSF.1800 for 0/330M, K and H ZSF.1610 for 0N MZM MZM For RTA fittings and drawer front adjusters drawer front adjuster N housing housing base plate housing MZM.0095 MZM.0070 MZM.0072 MZM.0073 MZM Subject to technical modifications without notice. 2000

12 EcoDrill For economical hinge drilling - Simple device for precisely drilling the Blum hinge pattern - Driven by an electric hand drill or cordless drill (14v or better) - Each drill bit is driven separately and retracts automatically - Variable drilling distance (from 2 to 8mm) - Clamps to various door thicknesses up to 40mm (1-9/16") thick - Includes drill bits, (pre-installed) and 2 torx driver bits Blum hinge boring pattern 9.5 Ø35 45 Ø8 EcoDrill M Specifications 1 2 Replacement drill bits 1 Ø35mm drill bit 2 Ø8mm drill bit M31.ZB35.02 M31.ZB mm Tool Set 3 2 wrenches 4 2 Torx driver bits 5 3 Torx chucks MZW.1300 EcoDrill (2 Torx driver bits included) 13mm Procedures Set the boring distance cams by rotating to the desired position 2. Align the EcoDrill body with the hinge centerline marked on the door 3. Secure the EcoDrill to the door by rotating the clamp arms 4. With the Torx bit in a hand drill, drill the three bits separately Subject to technical modifications without notice

13 EcoJig - Used to drill Ø5mm holes for mounting plates that are mounted with system screws, EXPANDO or INSERTA dowels - Ø5mm stop collar included Stop collar EcoJig Ø5mm drill bit DB-5mm Procedures 1. Mark hinge centerline, or hinge arm outline on cabinet side panel Align jig with marks and drill top Ø5mm hole. 3. Flip jig over so locator pin seats into top hole. 4. Drill bottom Ø5mm hole. 5. Install INSERTA, EXPANDO or system screw mounting plates INSERTA drilling jig - Used for installing Blum hinges with INSERTA or EXPANDO cups - Jig for drilling the Ø8mm dowel holes after Ø35mm cup hole is bored - Drilling distance adjusts from 2 to 8mm - Jig for drilling the Ø5mm holes for system screw mounting plates - Includes drill bushing to pilot bore Ø2.5mm for wood screw plates INSERTA drilling jig Ø8mm drill bit DB-8mm Ø5mm drill bit DB-5mm Hinge procedure Mounting plate procedure 1. Predrill door with Ø35 mm drill bit 2. Set drilling distance, position jig in hole and drill Ø8mm dowel holes 1. Position jig on center line 2. Drill holes for mounting plate with Ø5mm drill or Ø2.5mm with bushing B Ø8 Ø5 13 Subject to technical modifications without notice. 2000

14 PlateMate drilling jig Reversible bushing insert - Boring jig for all Blum face-frame adapter mounting plates - Clamps to the frame with cam lever. Adjustment knob accommodates frame thicknesses of 17.5mm (11/16") to 25mm (1") - Spacer screws permit quick use without measuring - Kit includes 2.5mm pilot bit and drill bit extension - Reversible drill bushing insert permits 9.5mm (3/8") or 12.5mm (1/2") centerline backsets PlateMate drilling jig Ø2.5mm drill bit DB-2.5mm Procedures Drilling pilot holes for inset face-frame adapter plate Drilling pilot holes for overlay face-frame adapter plates 175M plate (3/8") mm Adjustable drilling position 9.5 (3/8") or 12 (15/") Adjustable M4 x 25mm spacer screws included Applicable mounting plates CLIP MODUL 175L L L Mounting plate drilling jig 37 - For use with CLIP or MODUL mounting plates on overlay applications on panel cabinets - Simple location of mounting plate screw positions - If mounting plate locations are standard, multiple templates can be attached to a wooden strip - Pilots Ø2.5mm holes for wood screws Mounting plate jig Subject to technical modifications without notice

15 QUICKFIX jig for hinges and mounting plates - Simple device to locate hinge and mounting plate positions - Transfer of positions from door to cabinet or from cabinet to door - Positions can be transferred from either assembled or unassembled cabinets - Adjustable stop for various door overlays has calibration to simplify setup - For use with CLIP mounting plates. Order separate templates for MODUL mounting plates. QUICKFIX Specifications 1 2 QUICKFIX includes: 1 Rail, 1 meter long 2 Template with marking pin (2 included) 3 Fixed inner stop 4 Adjustable overlay stop 5 Fixed outer stop Accessories: CLIP template MODUL template 2.2 meter rail Ø5mm drill bit DB-5mm Procedures Door to Cabinet 1. Pre-bore door with drill press or any Blum machine. Side Panel Cabinet to Door 1. Line bore cabinet side panel in mm system with 37mm setback. Line bored side panel Hinge center points 2. Set adjustable stop to bottom door overlay. 2. Set adjustable stop to bottom door overlay. 3. Place door on adjustable stop and slide templates on rail until they engage with the hinge holes. Lock-down templates. 4. Remove door and place QUICKFIX on cabinet side panel. 5. Mark mounting plate holes with marking pin or drill Ø5mm holes through template for system screws Pre-bored hole Adjustable stop 3. Place side panel on fixed stop and slide templates until they align with the mounting plate holes that will be used. Use marking pin to locates holes. 4. Remove side panel and place QUICKFIX on door. 5. Mark hinge cup and dowel holes with marking pin. Drill holes with any Blum machine or a drill press. Door Adjustable stop 15 Subject to technical modifications without notice. 2000

16 Cabinet profile drilling jig - For determining cabinet profile positions using the integrated ruler - Drilling jig can be used with assembled or unassembled cabinets - Ensures precise and level location of cabinet profiles - Permits quick setup when using Blum's DYNAPLAN layout software - Suitable for the following Blum drawer runners: TANDEMBOX, METABOX, TANDEM and STANDARD Cabinet profile jig T Specifications 3 2 Includes: 1 Metric calibrated bar, 1 meter long 2 Adjustable templates (4 pcs. included) 3 Clamping lever 4 Extension for Ø2.5mm drill bit 1 4 Ø2.5mm drill bit Accessories: Template Ø2.5mm drill bit T DB-2.5mm Procedures 1. Determine runner locations from DYNAPLAN or by manual calculation. 2. Set templates on the bar by the scale. 3. Clamp assembly to the cabinet side 4. Drill Ø2.5mm pilot holes through templates for front and middle mounting positions. 5. Fasten runners to cabinet sides with wood screws into piloted holes. 6. Add screws to back of runner for added strength as required. Subject to technical modifications without notice

17 MINIFIX - Used for positioning cabinet profiles on cabinet sides - Holds cabinet profile in place while screws are installed or pilot drilling marks are made - Keeps cabinet profiles level - Ideal for face frame cabinets when positioning rear mount sockets - Can be used with the following Blum runners: METABOX 0 N, M, K, H METABOX 330 M, K & H STANDARD 230M and 230E MINIFIX Procedures MINIFIX works with Blum 3/4 extension cabinet profiles and METABOX 330 full extension. By placing MINIFIX against the top or bottom of the cabinet opening the minimum clearance is automatically set /0 Min. 24 5mm safety Min. 20 METABOX with min. top clearance METABOX with min. bottom clearance by using handle scale STANDARD 230M with min. bottom clearance Using the handle scale with METABOX drawers 1. Mark on the cabinet side where the bottom of the drawer is to be. (includes 5mm safety clearance) 2. Choose the notch on the handle that matches the drawer type. 3. Place cabinet profile in the MINIFIX, hold against the mark and use a VIX bit to pilot bore the mounting holes 4. Attach the cabinet profiles with wood screws 17 Subject to technical modifications without notice. 2000

18 Universal drilling jig - For marking or predrilling holes for front fixing brackets, drawer back and bottom (METABOX C15) - Suitable for the following drawers: METABOX 0/330 N, M, K, H TANDEMBOX 358 N, M - Works for either overlay or interior drawers BOX system drilling jig ZML Specifications 1 Drilling jig set includes: 1 Jig 2 Ø5mm marking pin 3 Ø10mm marking pin 4 Ø5mm stop collar 5 Ø10mm stop collar Ø 5 Ø 10 Ø 5 Ø 10 Accessories: Ø5mm drill bit Ø10mm drill bit DB-5mm DB-10mm Procedures Example with METABOX C-15 drawer components Marking or drilling drawer front Drilling drawer back Drilling drawer bottom Ø10mm bit Ø5mm bit Ø5mm bit Ø10 Marking pin Subject to technical modifications without notice

19 TANDEM drilling jig - Essential tool for drawers using TANDEM runners - To drill the Ø6mm holes for rear hooks - To pilot drill Ø2.5mm for TANDEM locking devices at 12 angle - To pilot drill the first fixing position for cabinet profiles TANDEM drilling jig T Accessories Accessories: Tool set 1 Drill bit extension 2 Stop collar 3 Screwdriver tip 4 Allen Key T mm bit 6mm bit Ø2.5mm drill bit Ø6mm drill bit DB-2.5mm DB-6mm Procedures Drilling rear fixing holes Drilling pilot holes for locking device screws Ø2.5mm bit with extension Drilling pilot holes for cabinet profiles Ø6mm bit Ø2.5mm bit Piloting bit - Used to pilot-drill for wood screws - Self-centering - Bit Ø2.85mm (1/8") Piloting bit VPB-5 19 Subject to technical modifications without notice. 2000

20 Corner post drilling jig - Used for pilot drilling the mounting holes for the corner supports of Blum's Pullout Surround Gallery system Corner post drilling jig ZML.0010 Procedures 1. Calculate side offset of corner post and set adjustable side stops. 2. Place jig on each corner of roll-out shelf and drill Ø2.5mm pilot holes. 3. Use extended screwdriver tip to attach corner post to shelf. 1 2 Included with jig: 1 Ø2.5mm drill bit, 3 pcs. 2 Screwdriver tip METABOX knock-in tools - Use for manual installation of METABOX press-in front fixing brackets - For all METABOX heights - Works with the new Clip-on brackets Front fixing bracket knock-in tools For ZSF.1300 /1800 brackets For ZSF.1610 brackets ZME ZME.1610 Procedures 1. Drill Ø10mm holes into drawer front. 2. Insert front fixing bracket into the tool. 3. Insert bracket into drawer front by striking tool with a heavy hammer. A shot-filled dead blow type hammer works best. Subject to technical modifications without notice

21 Drawer front marking gauges for METABOX and TANDEMBOX - Used for marking the front fixing bracket locations on the drawer front for drawers that are already installed in the cabinet. - For one time jobs or for setting up production runs - Eliminates calculations and is very accurate For METABOX 0/330 M,K & H ZML.1500 For METABOX 0N ZML.1510 For TANDEMBOX 358M ZML.3500 For METABOX Galleries ZML For TANDEMBOX Galleries ZML.3800 Specifications 2 1 Front fixing bracket marking gauges - Set includes right and left gauges that clamp onto the drawer box - Right gauge has adjustable tab to fix side overlay 2 Gallery rod marking gauges - Set includes two non-handed pieces with adjustable distance rods 1 Procedures Side overlay tab 1. Place marking gauges on installed drawer. Integral spring clamps to drawer bottom. 2. If galleries are used, place gallery gauge into rear bracket then adjust rod so it rests on the drawer bottom. 3. Place gallery gauges into the top of the marking gauges so that rods rest on the drawer bottom 4 Adjust side overlay tab. Place drawer front against the gauges and correctly spaced above the drawer front beneath. 5. Hold the drawer front in place and tamp it by hand to transfer the points of the gauges to the back of the drawer front 6. Attach the front fixing brackets with wood screws or use the marks to assist in setting up for production drilling. Drill Ø10mm holes for gallery INSERTA fittings. 21 Subject to technical modifications without notice. 2000

22 Drawer front adjuster center point 10mm Ø20mm - To transfer the center points of the Blum drawer front adjuster from the drawer front to the drawer box - For drawers using TANDEM, SOLO or STANDARD runners Center point Procedures 1. Drill Ø20mm holes in drawer front and insert dowel center 2. Position drawer front in front of installed drawer box 3. Tap drawer front with hand pressure to mark drawer box 4. Drill drawer box for mounting screws Ø20mm drill bit for center point M01.ZB20.02 R METABOX layout templates - A simple system of full scale plastic templates that represent the minimum height requirements of the METABOX drawer and have cutouts for marking cabinet profile and front fixing bracket positions. - The METATEMP kit contains one template each for 0N, 0/ 330M, 0/330K, 0/330H plus a universal Gallery template for all series. METABOX layout templates METATEMP Procedures Min. top clearance Min. bottom clearance Cabinet 0M 330M Front Fixing Bracket Drawer Front The METATEMP determines if the opening height is adequate for a particular drawer series as its overall size represents the minimum clearance. 1. Position the template either at the top or bottom of the opening with the front flush with the cabinet edge. 2. Mark the centerline for the appropriate cabinet profile (0 or 330 series) which is preset at 37mm setback. 3. Mark the front fixing bracket locations on the cabinet side at the front V cutouts. 4. Hold the drawer front against the cabinet at the desired height position and transfer the front fixing bracket horizontal centerlines. 5. If cabinet is pre-linebored, use 5mm shelf pins to position templates on the cabinet side and proceed with steps 3 & 4 Subject to technical modifications without notice

23 System Most Blum fittings have been designed to work in conjunction with the mm system. All relevant machines and assembly devices are capable of producing the required drilling positions and centers. The mm system s greatest advantage is in determination of cabinet and front drilling positions: - The majority of Blum s drawer and runner programs have been developed to work in conjunction with the mm system, making optimum use of the interior space within a cabinet. - With the exception of shallow-sided drawers all options share identical front fixing brackets which gives greater flexibility. - Both single and full extension runners share identical cabinet drillings. These factors ensure: - increased production efficiency - reduced handling of parts - reduced chance of errors The results are reduced production costs. Applications of the mm system Hinge systems TANDEMBOX TANDEM runners METABOX / Standard runners 23 Subject to technical modifications without notice. 2000

24 DYNAPLAN planning software - Used for planning door and drawer layouts for frameless cabinets using Blum hinge and drawer systems. - You enter all of the various attributes that are unique to your cabinet construction standards. - You choose the planning mode: whether point-to-point or within mm system constraints. - You enter drawer and door heights manually or choose automatic. - DYNAPLAN gives you a component list with dimensions of all drawer and door parts and all drilling locations for the hardware. - For use in PC / Windows based computers. Windows 3.1, Windows 95 or higher and Windows NT DYNAPLAN software DYNAPLAN 1.3 DYNAPLAN modules PRO FREE FREE Best suited for high production - Point-to-point cabinet member location - Allows for interchangeable drawers - Identical drawer fronts - Identical front fixing bracket or drawer front adjuster locations for all drawer fronts Provides maximum use of interior space - Point-to-point cabinet member location - Identical upper drawer front sizes, bottom drawer is unique because of bottom overlay Utilizes mm line boring - Doors and drawer fronts made in mm increments - Front fixing bracket locations in the mm grid - Cabinet profiles and hinge mounting plates locate in line bored holes Dimensions and calculations DYNAPLAN calculates the crucial dimensions needed for drawers, doors and the corresponding hardware Cabinet profile location 2 Drawer front dimensions 3. Drilling locations for front fixing brackets or drawer front adjusters 4. Door dimensions 5. Drilling locations for hinges 6. Centerline locations for mounting plates 7. Bottom and back dimensions for METABOX and TANDEMBOX drawer parts 8. Drawer dimensions for TANDEM, SOLO and STANDARD runners 9. Drawer front adjuster mounting hole location Subject to technical modifications without notice

25 Examples of DYNAPLAN data de panel thickn: 19.0 eal: 6.0 between fronts: 3.0 reveal: 0.0 ide reveal: 1.5 de reveal: 1.5 =========================================================== FRONT DRILLING POSITION PANELS SYSTEM DIMENS. CABINET FRONT BOTTOM BACK (HxW) (LxW) (HxW) =========================================================== 0M x x M x M x H x l-out systems: Cabinet profile locations DYNAPLAN lists the horizontal centerline of the cabinet profiles starting from the bottom of the cabinet side panel - Use the T cabinet profile drilling gauge. - Position the templates on the scale to the dimensions on the printout - Pilot bore for wood screws with Ø2.5mm bit - The templates locate the front and center mounting screws - Install the back screw after the profile has been attached - These dimensions can also be used to set up boring machinery Front fixing bracket locations al: 6.0 etween fronts: 3.0 eveal: 0.0 de reveal: 1.5 e reveal: 1.5 ========================================================== FRONT DRILLING POSITION PANELS SYSTEM DIMENS. CABINET FRONT BOTTOM BACK (HxW) (LxW) (HxW) ========================================================== 0M x x 71.0 x M x x M x x H x x out systems: e drilling distance: 26.0 DYNAPLAN lists the center position of the bottom hole of the front fixing brackets starting from the bottom of the drawer front - Use the ZML Universal drilling jig - Adjust the side and bottom tabs to the scales on the jig - Center punch the mounting locations or use a Ø10mm drill bit with stop collar to bore for press-in, EXPANDO or INSERTA front fixing brackets Width Length Height Making machine settings Reveal between fronts: 3.0 Bottom reveal: 0.0 Right side reveal: 1.5 Left side reveal: 1.5 ========================================================= FRONT DRILLING POSITION P POS. SYSTEM DIMENS. CABINET FRONT BOTTOM (HxW) (LxW) ========================================================= 4 0M x M x M x BOTTOM 0H x For pull-out systems: Front side drilling distance: 26.0 With the information on the data printout you can easily setup the depth fence and MINISTICK MZS.0040 for drilling drawer fronts - This example shows the side drilling distance which is adjusted on the MINIDRILL or MINIPRESS fence. - The vertical drilling position of front fixing brackets is set with the MINISTICK on the machine ruler. - Different METABOX drawer heights are drilled with one setup by registering to the different spring-loaded pins. W... Width L... Length 25 Subject to technical modifications without notice. 2000

26 Index Page Page DB-1/8 8 DB-10mm 18 DB-10X1/8 8 DB-2.5mm 14, 16, 19 DB-5mm 13, 15, 18 DB-6mm 19 DB-8mm 13 DYNAPLAN M01.ZB05.D2 R 8, 10 M01.ZB05.D3 L 8, 10 M01.ZB08.03 L 8 M01.ZB10.02 R 8 M01.ZB10.03 L 8 M01.ZB20.02 R 8, 22 M01.ZB25.02 R 8 M01.ZB35.02 R 8 M M M M31.ZB M31.ZB M51N1004*US 5 M51N M51N1005*US 5 M51N1053*US 5 M51N METATEMP 22 MZA MZK.1000*US 10 MZK.8000*US 10 MZL.1250.US 8 MZM MZM MZM MZM MZM MZM MZM MZM MZM MZM MZR MZS Subject to technical modifications without notice MZS MZS.2000 L+R 8 MZV MZW T108-10mm L 8 T108-10mm R 8 T T T T VPB-5 19 ZME ZME ZML ZML ZML ZML ZML ZML ZML

27 Notes 27 Subject to technical modifications without notice. 2000

28 Information is also available on these other Blum products: Angled hinge program COMPACT concealed hinges for frame cabinets Concealed hinges: INSERTA, CLIP and MODUL MAXUS institutional hinges METABOX drawer system POCKET DOOR hardware STANDARD drawer runners SOLO concealed runners TANDEM concealed runners TANDEMBOX drawer system Julius Blum, Inc Old Plank Rd. Stanley, NC toll free local fax internet The ultimate hardware system Printed in USA

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION.

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION. COMPACT BLUMOTION COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION www.blum.com/compact Innovative technology concentrated in a small space BLUMOTION inside Since the 1980s Blum

More information

STANDARD. Drawer runner program. Perfecting motion.

STANDARD. Drawer runner program. Perfecting motion. STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance

More information

Utensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides

Utensil sets. 15 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides. 21 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and

More information

METABOX METABOX. The versatile metal drawer system. blum.com

METABOX METABOX. The versatile metal drawer system. blum.com METABOX METABOX The versatile metal drawer system blum.com METABOX A drawer system with endless possibilities 2 Efficient storage in contemporary styling With METABOX, Blum offers an economical steel drawer

More information

SOLO Concealed Runners for wood drawers

SOLO Concealed Runners for wood drawers SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100

More information

MOVENTO. The Evolution of Motion

MOVENTO. The Evolution of Motion The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer

More information

Assembly and installation specifications. Application. Space requirements B height. Rear view D height. Space requirements D height min.

Assembly and installation specifications. Application. Space requirements B height. Rear view D height. Space requirements D height min. a Assembly and installation specifications Space requirements B height Space requirements D height Rear view D height 9.5 9.5 07 7 min. 7 9 min. 7.5 min. 7.5 min. Application 500 (0") 6 550 (") 8 8 8 96

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

AVENTOS PHOTO BOX AVENTOS. Lift systems. Perfecting motion.

AVENTOS PHOTO BOX AVENTOS. Lift systems. Perfecting motion. AVENTOS PHOTO BOX AVENTOS Lift systems www.blum.com Perfecting motion AVENTOS smooth and silent lift systems 2 Lifting cabinet doors up and out of the way AVENTOS lift systems are the new premium functional

More information

Does not require pressurized air Positioning stops included (qty 4) Optional laser center line, digital counter and hold down clamps

Does not require pressurized air Positioning stops included (qty 4) Optional laser center line, digital counter and hold down clamps Machines MINIPRESS P - Deluxe boring and insertion machine Front adjustable boring distance with digital counter Pneumatic hold-down clamps Improved boring depth adjustment Improved positioning stops (qty

More information

STANDARD. Drawer runner program. Perfecting motion. blum.com

STANDARD. Drawer runner program. Perfecting motion. blum.com STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close

More information

Waste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com

Waste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since

More information

Waste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com

Waste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX

More information

Standard drawer runner program

Standard drawer runner program Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available

More information

MOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness

MOVENTO. The Evolution of Motion For 1/2 Drawer Material Thickness The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed

More information

Machines Efficiently install Blum hardware

Machines Efficiently install Blum hardware Machines Efficiently install Blum hardware Perfecting motion Table of contents MINIPRESS P - Deluxe boring and insertion machine Page 4 As a boring and hardware insertion specialist, MINIPRESS P Deluxe

More information

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth.

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth. CLIP top BLUMOTION 107 The secret's inside even with a shallow boss drilling depth www.blum.com CLIP top BLUMOTION 107 combines technology with convenience With CLIP top BLUMOTION 107 the secret's inside:

More information

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is

More information

786 Kurka Jig Owners Manual

786 Kurka Jig Owners Manual 7 Kurka Jig Owners Manual Please Read Carefully! 7 Parts List Parts listed in this box are shown in photos in the instructions. Part Description Quantity 7B Jig Plate Set, pieces..................... Six

More information

MODUL general specifications

MODUL general specifications hinges general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment

More information

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS. ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer

More information

ASSEMBLY HARDWARE ASSEMBLY HARDWARE. Installation and assembly hardware for professional efficiency

ASSEMBLY HARDWARE ASSEMBLY HARDWARE.   Installation and assembly hardware for professional efficiency ASSEMBLY HARDWARE ASSEMBLY HARDWARE Installation and assembly hardware for professional efficiency www.grassusa.com Installation and assembly aids for all product families designed to suit our customer

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)

More information

Installation Instructions

Installation Instructions Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and

More information

Closet System Installation Manual

Closet System Installation Manual Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION TANDEM plus BLUMOTION Made in the USA Blum's newest generation of TANDEM plus BLUMOTION concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment,

More information

Drawer slide technology with superior running conditions. Dynamic NT

Drawer slide technology with superior running conditions. Dynamic NT slide technology with superior running conditions System Information The slide of the superlatives. Superior concealed roller bearing slides for wooden drawer boxes. Full Extension and Full Access slides

More information

AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet.

AVENTOS HK-XS. Small fitting, great convenience. Technical data sheet. Small fitting, great convenience Technical data sheet www.blum.com Order specification 2 1 8a 8b well suited for wall cabinets and larder units cabinet heights of 20 to 00 mm Interior depth of 12 mm minimum

More information

Parts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli

Parts List (Continued) 18 each: #8 x 0.625 Truss Head Phillips Screw 20 each: #8 x 1.75 Flat Head Phillips Screw 4 each: #8 x 1.25 Flat Head Philli EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original

More information

KnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System

KnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System KnobsandPulls.com Presents the KISS II system. A Simplified Approach to Building Cabinets Using the 32mm System Available online at www.cabsystems.com Revised September 2007 by Joel Ketner or www.kissii.com

More information

BioPrism Solid Surface

BioPrism Solid Surface Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from

More information

CONCEALED VERTICAL ROD PANIC EXIT DEVICE

CONCEALED VERTICAL ROD PANIC EXIT DEVICE INSTALLATION INSTRUCTIONS CRL JACKSON 1085-1085P CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0236 ORDER OF

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Privacy Wall Glass Selections - Polished Edge Slider Door

Privacy Wall Glass Selections - Polished Edge Slider Door Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin

More information

Passage Mortise Lock Set Lever to Lever

Passage Mortise Lock Set Lever to Lever Passage Mortise Lock Set Lever to Lever 1 Lever 2 Escutcheon 3 Mortise Lock 4 Scalp 5 Mortise Lock Strike 6 Mortise Lock Dust Box 7 Spindle 8 Spindle Spring 9 Spindle Retainer 2 1 9 8 7 9 7 8 3 1 2 4 5

More information

LF Series Assembly Instructions

LF Series Assembly Instructions LF Series Assembly Instructions 1998760 Revision A-10 Complete Series Master Packet 2010 Kimball International, Inc. T 800.482.1818 F 812.482.8300 Footprint Storage and Metal Filing Systems Assembly Instructions

More information

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7

Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7 FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track

More information

AVENTOS HK-XS. Small fitting, great convenience.

AVENTOS HK-XS. Small fitting, great convenience. AVENTOS HK-XS Small fitting, great convenience www.blum.com 2 Small fitting high quality AVENTOS HK-XS is the compact fitting for small stay lifts in high and wall cabinets. Thanks to the narrow style,

More information

Frameless Inline Door With Return QCI5263

Frameless Inline Door With Return QCI5263 INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges

More information

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device

98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device 911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device

More information

ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit

ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer

More information

Entry Mortise Lock Set Lever to Lever

Entry Mortise Lock Set Lever to Lever Entry Mortise Lock Set Lever to Lever 1 Lever 2 Escutcheon 3 Turn Piece 4 Mortise Lock 5 Scalp 6 Mortise Lock Strike 7 Mortise Lock Dust Box 8 Mortise Cylinder 9 Cylinder Swing Cover 10 Spindle 11 Spindle

More information

Mounting Instructions Item No.: /521/522/420/421/422

Mounting Instructions Item No.: /521/522/420/421/422 Mounting Instructions Item No.: 541.35.520/521/522/420/421/422 Revolving Corner Unit In addition to these general mounting instructions, please refer to the fitting instructions, where the individual drilling

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Special-Lite Restroom Partitions IMPORTANT - BEFORE YOU START... 1. Read through these installation instructions first to understand the order of work. 2. Check all components

More information

PROJECT PLAN TOOL CHEST

PROJECT PLAN TOOL CHEST BUILD IT WITH ROCKLER PROJECT PLAN TOOL CHEST FEATURING ROCKLER S BUILD QUESTIONS? Go to www.rockler.com or call 800-279-4441 Stock # Item 63420 1/4" x 24" x 30" Baltic Birch Plywood 63446 1/2" x 24" x

More information

Router Table Floor Stand

Router Table Floor Stand Router Table Floor Stand Owner s Manual 05J20.40 Introduction The Veritas Router Table Floor Stand has been designed as a free-standing router table workstation to work with the existing Veritas Router

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS

ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws

More information

Furniture Fittings Concealed Hinges

Furniture Fittings Concealed Hinges Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)

More information

CMT Enlock Jig Owner s Manual

CMT Enlock Jig Owner s Manual Thank you for purchasing the CMT Enlock Jig. This jig will simplify joinery in your shop, and on the job site. Please read the instructions thoroughly before using the Enlock Jig. Router requirements A

More information

Frameless Inline Door QCI5250

Frameless Inline Door QCI5250 INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5250 FRAMELESS PANEL / DOOR / PANEL QCI0249 REV. 3 Page 1 Certified 10/12/12 Parts List with pivot hinges *Quantities may vary. QCI0249 REV. 3 Page 2

More information

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding

More information

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2

33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2 911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F

More information

Hinge-Boring Jig 05J07.01

Hinge-Boring Jig 05J07.01 Hinge-Boring Jig 05J07.01 This versatile jig contains a built-in carbide cutter and is designed to be powered by your own electric drill. It will locate cup and screw holes for 35mm cup hinges. With this

More information

Designed for Your Convenience

Designed for Your Convenience Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed

More information

Hinge identification guide

Hinge identification guide Hinge identification guide CLIP hinge 3 main components Arm Link Cup Link Arm Cup NOTE: All hinges shown are straight-arm hinges. The same characteristics apply to cranked hinge arms with the exception

More information

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device

33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device *911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical

More information

Steel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815)

Steel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815) Steel Solutions USA 602 E. Walnut Street Watseka, IL 60970 p: (888) 875-5004 f: (815) 432-3364 sales@steelsolutionsusa.com Published February 2011 2011 Steel Solutions USA. All rights reserved. version

More information

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74 Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it

More information

Custom Wood Frame Overlay for Glass Doors Installation Instructions

Custom Wood Frame Overlay for Glass Doors Installation Instructions MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

GE Monogram. Installation. Instructions. 27" Built-In Ovens. Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW

GE Monogram. Installation. Instructions. 27 Built-In Ovens. Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW GE Monogram Installation Instructions 27" Models ZEK757WW ZEK757BW ZEK737WW ZEK737BW CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT: Save these instructions

More information

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions Mounting and Adjustment Instruction for corner carrousel fitting In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling

More information

LAN Locker Adjustable Shelves

LAN Locker Adjustable Shelves Adjustable Shelves LAN LOCKER ADJUSTABLE SHELVES * Adjustable Shelves are available for LAN LOCKER widths: 24, 30, 48, 60, and 72. * When installing more than one Adjustable Shelf, it is recommended that

More information

Preference Collection 5580 Treatment Console INSTALLATION GUIDE

Preference Collection 5580 Treatment Console INSTALLATION GUIDE Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury

More information

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories

More information

Installation Manual for Metal Toilet Partitions Standard Series

Installation Manual for Metal Toilet Partitions Standard Series For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations

More information

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the

IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding

More information

Double Frameless Swing Door QCI5247

Double Frameless Swing Door QCI5247 INSTALLATION INSTRUCTIONS Double Frameless Swing Door QCI5247 WALL MOUNT HINGES QCI5247 REV. 0 Page 1 Certified 06/16/2016 Parts List with wall mount hinges *Quantities may vary **Quantities double where

More information

Preference Collection and Treatment Console INSTALLATION GUIDE

Preference Collection and Treatment Console INSTALLATION GUIDE Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious

More information

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY. SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last

More information

TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill

TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24

More information

OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin

OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK

More information

Installing Electronic Media Storage Components into Lateral File Cabinets

Installing Electronic Media Storage Components into Lateral File Cabinets Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Installing Electronic Media Storage Components into Lateral File Cabinets 830-CH-9 830-CH-12 830-CH15 836-CH-9 836-CH-12 836-CH-15 842-CH-9

More information

pottery barn kids MADISON CABINET HUTCH

pottery barn kids MADISON CABINET HUTCH pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

Frameless Inline Door QCI5254

Frameless Inline Door QCI5254 INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5254 FRAMELESS DOOR / PANEL QCI5254 REV. 0 Page 1 Cer fied 06/16/2016 Parts List with wall mount hinges *Quanes may vary QCI5254 REV. 0 Page 2 Cer fied

More information

Assembly Instructions

Assembly Instructions RoomScape Furniture System March 2013 - Bed Styles bed deck board bed deck board top cap top cap base glide middle side rail frame frame stacking device frame middle lower reinforcement side rail Single

More information

Installation Instructions

Installation Instructions VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)

More information

Functional Hardware HINGES:

Functional Hardware HINGES: Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet

More information

PULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE

PULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square

More information

Frameless Heavy Glass Door with Header

Frameless Heavy Glass Door with Header INSTALLATION INSTRUCTIONS Frameless Heavy Glass Door with Header QCI5243 QCI5243 REV. 0 Page 1 Certified 06/16/16 Frameless Heavy Glass Door with Pivot Hinges ITEM NUMBER DESCRIPTION QUANTITY 1 DOOR GLASS

More information

Topo Freestanding Applications - Private Office

Topo Freestanding Applications - Private Office 4 3 2 Topo Freestanding Applications - Private Office Combo Wrench If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com

More information

Frameless Door QCI5284

Frameless Door QCI5284 Frameless Door QCI5284 F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com INSTALLATION INSTRUCTIONS Frameless

More information

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11 -0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide

More information

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Vanity Installation Instructions

Vanity Installation Instructions Vanity Installation Instructions Segments of these instructions will relate to your vanity. Please read these instructions thoroughly and ensure the appropriate instructions are used during the installation

More information

BHJ Products, Inc. Parts List & Instructions

BHJ Products, Inc. Parts List & Instructions Product Name: Lifter-Tru Kit for Ford Windsor & SVO Small Block V8 Page 1 of 5 Kit Contents: 2x End Plates 2x 5/8 Threaded Adjustment Sleeves 1x Front Angle Bracket 2x 5/8 Adjustment Sleeve Spacers * 1x

More information

Laminate Cabinet Installation Instructions

Laminate Cabinet Installation Instructions Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper

More information

#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS

#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED

More information

Frameless Heavy Glass Door with Wall Mount Hinges

Frameless Heavy Glass Door with Wall Mount Hinges INSTALLATION INSTRUCTIONS Frameless Heavy Glass Door with Wall Mount Hinges QCI-5245 QCI5245 REV. 0 Page 1 Certified 06/16/16 Frameless Door with Wall Mount Hinges ITEM NUMBER DESCRIPTION QUANTITY 1 DOOR

More information

Complete Dovetail Jig Instructions

Complete Dovetail Jig Instructions Complete Dovetail Jig Instructions 15 18 4 3 1 12 13 8 19 17 16 6 14 5 9 11 10 2 9 PARTS LIST - Complete Dovetail Jig Introduction Your new dovetail jig will cut Full Through Dovetails and three varieties

More information

Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009)

Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009) Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009) 3/16" HEX BIT #2 ACR BIT 3/8" HEX SOCKET Full-Height (No Switch) Transom (No Switch) Full-Height (With

More information