Hinge identification guide
|
|
- Rose McCormick
- 5 years ago
- Views:
Transcription
1 Hinge identification guide
2 CLIP hinge 3 main components Arm Link Cup Link Arm Cup NOTE: All hinges shown are straight-arm hinges. The same characteristics apply to cranked hinge arms with the exception of the shape/size of arm and different reference numbers. Subject to technical modifications without notice. 05 Blum Inc.
3 CLIP 00 CLIP 07 3 CLIP 00 Stepped arm Straight link 3 Large opening in cup 4 Exposed link rivet 4 7M5X0 3 CLIP 07 Straight arm Tapered link 3 Small closed cup 4 Covered link rivet 4 75M5X0 Subject to technical modifications without notice. 05 Blum Inc. 3
4 CLIP 07 CLIP top 07 CLIP 07 Smooth surface Sliding depth adjustment screw 3 Two rivets 3 75M5X0 CLIP top 07 Ribbed surface "Spiral-tech" cam depth adjustment screw 3 Three rivets 3 75T5X0 Subject to technical modifications without notice. 05 Blum Inc. 4
5 CLIP top 07 CLIP top 0 CLIP top 07 Standard side adjustment screw Tapered link 3 Small opening in cup 3 75T5X0 CLIP top 0 Cam side adjustment screw Slight rib on link 3 No opening in cup 3 7T55X0 Subject to technical modifications without notice. 05 Blum Inc. 5
6 CLIP top 07 CLIP top 95 thick door CLIP top 07 Straight arm Tapered link 3 Small opening in cup 75T5X0 3 CLIP top 95 thick door Stepped arm Raised line on arm 3 Exposed link rivet 7T95X0 3 Subject to technical modifications without notice. 05 Blum Inc. 6
7 CLIP top 0 CLIP top 0 + CLIP top 0 Straight arm logo 7T55X0 CLIP top 0 + Indented arm logo 73T55X0 Subject to technical modifications without t notice. 05 Blum Inc. 7
8 CLIP top 0 CLIP top 0 + CLIP top 0 Straight arm 7T35X0 CLIP top 0 + Indented arm 73T35X0 Subject to technical modifications without t notice. 05 Blum Inc. 8
9 CLIP top BLUMOTION 0 CLIP top BLUMOTION 0 + CLIP top BLUMOTION 0 Straight arm 7B35X0 CLIP top BLUMOTION 0 + Indented arm 73B35X0 Subject to technical modifications without notice. 05 Blum Inc. 9
10 CLIP top 55 CLIP top 5 3 CLIP top 55 T-cutout in arm Indented hinge link 3 BLUMOTION ramp sides are open, larger and raised 7T75X0N 3 CLIP top 5 Y-cutout in arm Flat hinge link 3 BLUMOTION ramp is solid, smaller and lower 7T75X0D Subject to technical modifications without notice. 05 Blum Inc. 0
11 CLIP top 70 CLIP top CLIP top 70 T-cutout in arm Adjustment screw recessed 3 Rear link inside 4 Round hole 7T65X0 3 4 CLIP top 55 cutouts in arm Adjustment screw flush on top 3 Rear link outside 4 Oval hole 7T75X0N Subject to technical modifications without notice. 05 Blum Inc.
12 Attachments Screw-on No screws No dowels 7B3550 Press-in Dowel screws 8 mm dowels 7B3580 Subject to technical modifications without notice. 05 Blum Inc.
13 Attachments EXPANDO EXPANDO screws EXPANDO dowels 7B358E INSERTA Die cast cover 8 mm INSERTA dowels 7B3590 Subject to technical modifications without notice. 05 Blum Inc. 3
14 CLIP top BLUMOTION, CLIP top and CLIP SERIES 7 = CLIP top BLUMOTION, CLIP top, CLIP 7 B STYLE B = CLIP top BLUMOTION T = CLIP top M = CLIP Subject to technical modifications without notice. 05 Blum Inc. 4
15 CLIP top BLUMOTION SERIES 7 = CLIP top BLUMOTION STYLE B = CLIP top BLUMOTION ARM DESIGN 4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application ATTACHMENT FEATURES 0 = Standard A = Aluminum E = EXPANDO 7 B CLOSING Odd = All CLIP top BLUMOTION hinges are self close only, no free swing = 0, 95 3 = = Angled, special application OPENING ANGLE 3 = 0, = 95, angled and special application ATTACHMENT 0 = Aluminum 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 5
16 CLIP top STYLE T = CLIP top A = Angled CLIP top SERIES 7 = CLIP top ARM DESIGN 4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application ATTACHMENT FEATURES 0 = Standard A = Aluminum E = EXPANDO 7 T CLOSING Even = Free swing Odd = Self close 0 or = 0, 0, 70, 95, 55, Mini or 3 = 0 +, 0 +, Aluminum 4 or 5 = 07, Glass 9 = Angled, special application OPENING ANGLE 0 = Mini = 07 3 = 0 4 = Glass 5 = 0 6 = 70 7 = 55 8 = Bi-fold 9 = 95 ATTACHMENT 0 = Screw-on for special application 3 = 55 or Bi-fold, press-in 4 = 70 or 55 INSERTA 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 6
17 CLIP STYLE M = Hole for center adjustment and cover cap ARM DESIGN 5 = Straight-arm 6 = Half-crank 7 = Full-crank SERIES 7 = CLIP 7 M ATTACHMENT FEATURES 0 = Standard E = EXPANDO CLOSING Even = Free swing Odd = Self close 0 or = 00 5 = 07 OPENING ANGLE = 07 = 00 ATTACHMENT 5 = Screw-on 8 = Press-in 9 = INSERTA Subject to technical modifications without notice. 05 Blum Inc. 7
18 CLIP mounting plates STYLE E = EXPANDO H = Two-piece L = One-piece ATTACHMENT LOCATION 0 = Frame 9.5 mm setback = Panel 37 mm setback 6 = Frame.5 mm setback SERIES 7 = CLIP ATTACHMENT FEATURES 0 = Standard Z = Twin 7 5 L Face frame, special applications MATERIAL 3 or 4 = Steel 5 or 7 = Zinc die-cast ATTACHMENT 3 or 5 = In-line 6 or 7 = Wood screws 8 = Pre-mounted system screws 9 = System screws or #7 wood screws HEIGHT 0 = 0 mm 3 = 3 mm 4 = 4.5 mm 6 = 6 mm 9 = 9 mm SPECIAL FEATURES E = EXPANDO I = INSERTA. = Comment Subject to technical modifications without notice. 05 Blum Inc. 8
19 COMPACT hinge 3 main components Cup Arm Mounting plate Arm Mounting plate Cup Cup depth NOTE: All COMPACT hinges have the overlay stamped on the mounting plate Subject to technical modifications without notice. 05 Blum Inc. 9
20 COMPACT BLUMOTION 39C COMPACT BLUMOTION 38C COMPACT BLUMOTION 39C 0 /" cup depth Smooth arm 39C35XB.XX COMPACT BLUMOTION 38C 07 7/6" cup depth Indented arm 38C35XB.XX Subject to technical modifications without notice. 05 Blum Inc. 0
21 COMPACT BLUMOTION 38N COMPACT BLUMOTION 38B COMPACT BLUMOTION 38N 05 Dimple in arm Partial overlay plate ( screw installation) 38N35XB.XX COMPACT BLUMOTION 38B 07 Indented arm Face mount plate ( screw installation) 38B35XBF Subject to technical modifications without notice. 05 Blum Inc.
22 COMPACT 39C COMPACT 38C COMPACT 39C 0 /" cup depth 39C stamped on base of cup 39C35XC.XX COMPACT 38C 07 7/6" cup depth 38C stamped on base of cup 38C35XC.XX Subject to technical modifications without notice. 05 Blum Inc.
23 COMPACT 38N COMPACT 38. COMPACT 38N 05 Side adjustment screw Cam depth adjustment screw 38N35XC.XX COMPACT No side adjustment screw No cam depth adjustment screw Subject to technical modifications without notice. 05 Blum Inc. 3
24 Attachments Screw-on No screws No dowels 38N355B.08 Press-in Dowel screws 8 mm dowels 38N358B.08 Subject to technical modifications without notice. 05 Blum Inc. 4
25 COMPACT BLUMOTION and COMPACT SERIES 3 = COMPACT BLUMOTION and COMPACT 3 9 C B. 0 OVERLAY & ADJUSTMENTS. = Partial height only B = Full height & side C = Full height, side & depth N = Partial height, side & depth Subject to technical modifications without notice. 05 Blum Inc. 5
26 COMPACT BLUMOTION and COMPACT OVERLAY & ADJUSTMENTS. = Partial height only B = Full height & side C = Full height, side & depth N = Partial height, side & depth SERIES 3 = COMPACT BLUMOTION and COMPACT CUP MATERIAL 5 = Steel ATTACHMENT/FEATURES 0 = Standard B = COMPACT BLUMOTION C = COMPACT CUP DEPTH 8 = mm (7/6") 9 = 3 mm (/") 3 9 C B. 0 ATTACHMENT 5 = Screw-on 8 = Press-in PLATE MOUNT. = Wrap around E = Edge F = Face OVERLAYS 05 = 5/6" 06 = 3/8" 08 = /" 0 = 5/8" = 3/4" 6 = " 0 = -/4" = -5/6" = -3/8" 4 = -/" 5 = -9/6" Subject to technical modifications without notice. 05 Blum Inc. 6
27 Notes Subject to technical modifications without notice. 05 Blum Inc. 7
28 Please visit blum.com for information on other Blum products LIT.HNG Ident Blum, Inc. Blum, Inc Old Plank Rd. Stanley, NC blum.com
MODUL general specifications
hinges general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More informationCOMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION.
COMPACT BLUMOTION COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION www.blum.com/compact Innovative technology concentrated in a small space BLUMOTION inside Since the 1980s Blum
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More informationWaste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationWaste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationSOLO Concealed Runners for wood drawers
SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100
More informationAssembly instructions
AVENTOS HK-S Assembly instructions Required parts Lift mechanism set Set includes: Lift mechanism (qty 2) Cover plate (left and right) Also includes: SCHR 4X #7 x mm (-/8 ) wood screw (qty 0) Power factor
More informationAVENTOS HK-XS. Small fitting, great convenience. Technical data sheet.
Small fitting, great convenience Technical data sheet www.blum.com Order specification 2 1 8a 8b well suited for wall cabinets and larder units cabinet heights of 20 to 00 mm Interior depth of 12 mm minimum
More informationMachines and assembly aids. Devices to efficiently install Blum hardware
Machines and assembly aids Devices to efficiently install Blum hardware Table of contents Application Chart MINIPRESS Drawer BOX Assembly Cabinets Hinges Runners Systems Fittings Page 4 MINIDRILL 6 Machine
More informationMOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness
The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed
More informationDesigned for Your Convenience
Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed
More informationWhere does this. motion come from? Perfecting motion
Where does this motion come from? Perfecting motion Blum, Inc. Headquarters, Stanley, NC Quality is what our customers have come to expect from Blum For more than 50 years Blum has been manufacturing quality
More informationFunctional Hardware HINGES:
Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationCLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth.
CLIP top BLUMOTION 107 The secret's inside even with a shallow boss drilling depth www.blum.com CLIP top BLUMOTION 107 combines technology with convenience With CLIP top BLUMOTION 107 the secret's inside:
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationMETABOX METABOX. The versatile metal drawer system. blum.com
METABOX METABOX The versatile metal drawer system blum.com METABOX A drawer system with endless possibilities 2 Efficient storage in contemporary styling With METABOX, Blum offers an economical steel drawer
More informationAVENTOS HK-XS. Small fitting, great convenience.
AVENTOS HK-XS Small fitting, great convenience www.blum.com 2 Small fitting high quality AVENTOS HK-XS is the compact fitting for small stay lifts in high and wall cabinets. Thanks to the narrow style,
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION TANDEM plus BLUMOTION Made in the USA Blum's newest generation of TANDEM plus BLUMOTION concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment,
More informationAVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable
lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationAVENTOS PHOTO BOX AVENTOS. Lift systems. Perfecting motion.
AVENTOS PHOTO BOX AVENTOS Lift systems www.blum.com Perfecting motion AVENTOS smooth and silent lift systems 2 Lifting cabinet doors up and out of the way AVENTOS lift systems are the new premium functional
More informationShay Cab - Floor & Roof
Shay Cab - Floor & Roof Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 1/20/04 Last Revised: 06/06/2004 Cab Floor: A cab floor was made at the same time as the tender floor. I was unhappy with some
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationThe Castle House Assembly Instructions By Laser Dollhouse Designs
The Castle House Assembly Instructions By Laser Dollhouse Designs HOUSE PARTS First floor slots labeled 1A-1G First floor Walls labeled 1A-1G First floor interior door frames (4) Wall 1A frames (6) Main
More informationSeries 9000 Panel Door; In-Line, Corner and Permanent Wall Application
Series 9000 Panel Door; In-Line, Corner and Permanent Wall Application 5/32" Drill Bit In-Line Corner Permanent Wall 3/16" Allen Wrench If you have a problem, question, or request, call your local dealer,
More informationSelekta Pro 2000 Fast assembly hinges for office and commercial furniture
Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment
More informationWoodware Designs -- Furniture Construction Hints
Woodware Designs -- Furniture Construction Hints 1. Purpose The following are construction hints for woodworking details used in building many of our desks. We are providing them here free for our woodworking
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationM MODULAR PARTS T01-A INSTALLATION INSTRUCTIONS MIRRORED CABINET W/DEFOGGER K-15512T , 2011 Copyright Kohler China Ltd.
M M MODULAR INSTALLATION INSTRUCTIONS ( ) MIRRORED CABINET W/DEFOGGER K-15512T BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and
More informationSTANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationImportant Parts of the Legare
Important Parts of the Legare Parts Most Legare machines came with a 54 slot cylinder and a 72 slot cylinder A 36 slot ribber dial was standard Occasionally you will see other cylinder/ribber dial sizes
More informationSPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.
SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual
More informationDoor Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
More informationAllen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
More informationWooden Frame Type Instruction Manual
Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationLCS075 All Purpose Glazing Tool LCS Patio Door Roller Channel
Patio, storm & exterior door hardware LCS075 All Purpose Glazing Tool Arrow Bumper LCS Patio Door Roller Channel Mousetrap 1 BRONZE BUSHINGS * New size now available. 2 CORNER KEYS LCS1460 Miter Cut, Glass
More informationInstallation Instructions. Oakmont Folding Doors
Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free
More informationAVENTOS. An inspiring range of lift systems.
AVENTOS An inspiring range of lift systems www.blum.com 2 Ease of motion multitude of options The AVENTOS lift system brings ease of motion to the wall cabinet. Even large and heavy lift systems can be
More informationBlum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018
Blum 110 BLUMotion 3/4" Overlay Face Frame Compact Hinge Instructions Effective August 2018 Finish Tab Cup Diameter Cup Depth Minimum Door Thickness Nickel 3mm 35mm 11mm 16mm (.63") Maximum Door Thickness
More informationTRUTH TIPS: 1. Operator handing is determined by the hinge side when viewed from the outside.
CASEMENT AWNING 15 ENTRYGARD Dual arm action pushes the sash open while pulling the hinge side of the sash to the open position. When properly installed this operator results in almost effortless operation
More informationRAILING. Installation Guide
RAILING Installation Guide THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance
More informationZODIAC 601 XL. Detail of outboard end. Full length recessed elevator trim tab. Detail of inboard end. Trim tab along left trailing edge of elevator.
Full length recessed elevator trim tab. Detail of outboard end. Detail of inboard end. Trim tab along left trailing edge of elevator. Trim tab in neutral position 6-T-6 - Page 1 of 12 Drill out the middle
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationAdjustable Countertop Installation
Adjustable Countertop Installation Applies to Models: A1, A2, A3, A4, A5, & A6 Required Tools: Stud Finder, Level 1/4 deep well socket, Screwdrivers, Tape Measure, Drill and Drill Bits Language of origin:
More informationAluminium Frame Doors for Cupboards and Wardrobes
Please see our order forms to help with full details for ordering Aluminium Frame Doors for Cupboards and Wardrobes Five frame styles Belval Brittany 9mm Calais Cayen 38mm Top/bottom rail Argonne Side/stile
More informationAdvanced Frameless Library Guide Advanced options keeping you ahead of the competition. Version 17
Advanced Frameless Library Guide Advanced options keeping you ahead of the competition Version 17 Introduction ADVANCED FRAMELESS LIBRARY GUIDE Hinge Setup Introduction Library Guide This library guide
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationTruth Casement Operators
Note: New rounded style housing for all operators shown below Truth Casement Operators 05275 9" 15.09 ight Hand Shown 15.30 15.61 9" 3-15/1 eft Hand Cover colors in stock: bronze, gold, white For cover,
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationSTOL CH 701. Standard L ANGLES are supplied in 4ft length. Ref. bottom left diagram on drawing 7-V-2
Standard L ANGLES are supplied in 4ft length. Ref. bottom left diagram on drawing 7-V-2 Length = 206mm. Layout the cut line on the outside flanges. Ref. see boxed diagram on drawing 7-V-2 Three vertical
More informationSTOL CH 701. Layout the cut line along the bend tangent line on the web. 7V6-1 and 7V6-2SP
Layout the cut line along the bend tangent line on the web. 7V6-1 and 7V6-2SP ORIENTATION: 90 degree flange is up Layout the bend line, 20mm from the end. Ref. bottom right diagram 7-V-6 Use a square to
More informationA = 4-1/2 B = 1/4 C = 5/16. Pin Dia. Use with C-11, C-12, C-13, C-19 Use with C-10, C-12, C-13, C dia. A = 4-1/3 A = /16 1-5/8
B C-10 Dia. Pin C-11 Dia. Pin C-12 Dia. Pin Bi-fold Pins & Associated Parts A A = 4- B = C = A = 4-1/6 B = C = A = 4- B = C = C Pin Dia. C-11, C-12, C-13, C-19 C-10, C-12, C-13, C-16 C-13 Dia. Cap C-16
More informationv1.0 ASSEMBLY GUIDE Josie Sideboard Small
v1.0 ASSEMBLY GUIDE Josie Sideboard Small Components Upon unpacking your sideboard from it s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationSeries 8 Bifold door/shower wall
INSTALLATION GUIDE Series 8 Bifold door/shower wall Bifold Door Shower wall Corner Door NOTE: When the products is being used as a Bifold in a recess or with a side panel it can be used with or without
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationNORTH AMERICA ONLY GENERAL INFORMATION SCRAP SHEDDING ON DIES
GENERAL INFORMATION SCRAP SHEDDING ON DIES 1. CAST S FOR NOISE REDUCTION SEE W-DX5-58M PAGE 5. ALL S, ARE TO BE DESIGNED WITH A PREFERRED SHEDDING ANGLE OF 30 DEGREES, REACHING TO THE EDGE OF THE DIE.
More informationALLORA SWING PANEL INSTALLATION INSTRUCTIONS
ALLORA SWING PANEL INSTALLATION INSTRUCTIONS Before Installation Please check that your Allora Swing Panel is undamaged SEQUENCE OF INSTALLATION These instructions are also available from the Athena website:
More informationAluminum Frame Type Instruction Manual
Aluminum Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationFolding Concepta 25. Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.
Flush when closed, completely open. Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door. Description Flush cabinet fronts open fully end to end with HAWA-Folding Concepta 25. Two
More informationNote: This assembly instruction will cover all configurations of Alloy adjustable height single bases.
Note: This assembly instruction will cover all configurations of adjustable height single bases. 1 With the leg upside down. Attach the freestanding foot to the bottom of the adjustable height leg using
More informationBLUMOTION inside AVENTOS. Various applications for lift systemscoco. connect.blum.com
BLUMOTION inside AVENTOS Various applications for lift systemscoco connect.blum.com AVENTOS Moving solutions for every lift system 2 Use AVENTOS to address individual customer requests AVENTOS is the lift
More informationTOOLS REQUIRED: HARDWARE INCLUDED: 13MM FLAT WRENCH FOR LEVELING THE STRUCTURE RATCHET WITH 5MM HEX BIT FOR CORNER SCREWS ON TOP TRAVERSE BEAMS
1 TOOLS REQUIRED: RATCHET WITH 5MM HEX BIT FOR CORNER SCREWS ON TOP TRAVERSE BEAMS 13MM FLAT WRENCH FOR LEVELING THE STRUCTURE RUBBER MALLET FOR INSERTING PANELS 8MM HEX BIT WITH EXTENSION FOR HEX BOLT
More informationContinue gluing the remaining top parts ensuring the angled piece is glued well. Set aside and let dry. See photo below
Radiator rev 1.1 The SE5a s radiator is one of the most recognized radiators in WW1. It is one of the components that defines the SE5a. The original SE5a has seen multiple radiator designs used during
More informationBASE PLATES - GRASS Face Frame Cabinet Style...B-39 Nexis Series...B-40 to B Series...B-42
Section index COMPACT FACE FRAME HINGES...-2 to -6 STANDARD APPLICATION HINGES 94 Degree Opening...-7 110 Degree Opening...-8 to -11 120 Degree Opening...-12 to -13 125 Degree Opening...-14 to -15 165
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More information9/16" (14mm) 1/2" (12mm)
Deluxe Header Kit Deluxe Header Kit Cat. No. SDH660-66" (1676mm) Length Cat. No. SDH980-98" (2489mm) Length Cat. No. SDH144-144" (3657mm) Length Each Deluxe Header Kit Contains: 66" (1676mm), 98" (2489mm)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Vinyl Window Wells 229 S. Groffdale Road Gordonville, PA 7529 phone 77/768/068 fax 77-768-8604 www.lightwell.us sales@lightwell.us INDEX STEP WINDOW WELL INSTRUCTIONS... - STAC-IT
More informationComparable ISO Standard. Date of current standard/modified
Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified 980 7042 27042 7042 1998-02 980 10513 30513 10513 1998-02
More informationASSEMBLY HARDWARE ASSEMBLY HARDWARE. Installation and assembly hardware for professional efficiency
ASSEMBLY HARDWARE ASSEMBLY HARDWARE Installation and assembly hardware for professional efficiency www.grassusa.com Installation and assembly aids for all product families designed to suit our customer
More informationCROSS SECTIONS OF PATIO DOORS
CROSS SECTIONS OF PATIO DOORS MOUNTING OPTIONS FOR A SINGLE DREAMSCREEN OPTION A Attach the housing to a 1 x 2 rectangular aluminum tube that is attached to the stile (frame) of the fixed patio door panel.
More informationExtended Stiles (EXT)
This section details the options that are available on the RTA. The Available Options section mirrors the options bar you see associated with each cabinet in the WALL, BASE, TALL, VANITY and HOME OFFICE
More informationLEGRABOX. Drawer Assembly and Removal. Drawer Assembly Step 1. Step 2. Step 3. Step 4. Step 5. Drawer Removal
Drawer Assembly and Removal Drawer Assembly Step 1 Measure inside cabinet width (ICW) Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification
More informationSIDE FOLDING POST ADJUSTMENTS
SIDE FOLDING POST ADJUSTMENTS TABLE OF CONTENTS WARNINGS AND SAFETY INFORMATION 3 TOOLS REQUIRED 4 GENERAL NOTES 5 POST IDENTIFICATION 6 POST TO CURTAIN CONNECTIONS 8 P01/P03 LOCK PLATE HEIGHT ADJUSTMENT
More informationCENTER WING SECTION (CWS) WORK REPORT
CENTER WING SECTION (CWS) WORK REPORT No. Check Parts / Description Qty PHASE 1: Preparations 1 [ ] 6V1-3 Rear ribs 2R & 2L 1 [ ] L Angle 6 2 [ ] 6V2-1 Rear Ribs.032 2R & 2L 2 [ ] 6V5-1 Gear Rib Doubler
More informationMcCue Bumper Installation Instructions
McCue Bumper Installation Instructions McCue 8" Bumper Tools Required: Saw with 10-12" blade Tape measure Flat head screwdriver Phillips screw driver Pencil or chalk line Drill with Philips driver bit
More informationInstalling DoorSense August Smart Lock Pro
Installing DoorSense August Smart Lock Pro First, decide how you would like to install the DoorSense. August provides two options for installation: a surface mount and a flush mount installation. The surface
More information2CH610-BOB 2CH67-BOB 2CH65-BOB ø 60 cm
CICERONE ST.132-1ENG SPECIFICATION Range: Cicerone Design: Lorenzo Stano SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 60 cm Code: 2CH610-BOB height 103,5 cm, base Ø 50 cm, top Ø 60 cm 2CH67-BOB
More informationBathroom Installation Manual
Bathroom Installation Manual MAKING SPACE MORE VALUABLE May 2016 1 2 Contents page 1. Introduction Page 4 2. Tools required / key Page 5 3. Fittings Page 6 4. 600 cistern unit Page 7 5. 600 vanity unit
More informationVersatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
More informationVersatrac R-System Stock Extrusions, Clips and Accessories
Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More informationG0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationClearSpan Twist-of-the-Wrist Assembly Instructions
ClearSpan Twist-of-the-Wrist Assembly Instructions Curved-Wall for Roll-Up Side Flat-Wall for Curtain Application 2008 ClearSpan All Rights Reserved. Reproduction is prohibited without permission. Revision
More information96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED
96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED GENERAL INSTRUCTIONS Should you elect to use the recommended Door Skin, which is 1/8 mahogany plywood measuring 36 x 88. Have it cut
More information