Jigsaw Blades Conversion Chart

Transcription

1 Jigsaw s Conversion Chart New RECA Art. Bosch Profix Bosch Profix No. Code Code Wood T101B P101B T101D P101D T111C P111C T144D P144D T244D P244D T101BR P101BR T101AO T234X Metal T118A P118A T218A P218A T127D P127D T118B P118B T318B P318B T118G P118G T318A T123X Specialist T34XF T118EHM T301CHM T341HM T101A VY 10/16 Reproduction, even in part, prohibited. Printed in UK. Bosch Jigsaw s for Wood Basic for Wood - cost effective HCS CARBON Art. No Tooth with teeth Spacing T119B 1 2 Softwood 2-1mm, plywood, chip & fibre board T111C 74 3 Softwood 4-0mm, chipboard, fibre boards Speed for Wood - fast cut HCS CARBON STEEL ground edge Art. No with teeth T144D 74 4 Softwood (-0mm), chipboard, fibre boards T244D 74 4 Same as T144D, especially for curved cuts A34 T344D Thick construction timber, softwood (-100mm), chipboard, fibre boards

2 Bosch Jigsaw s for Wood Clean for Wood - clean cut CARBON STEEL ground edge, fine & clean cuts in Hard & Softwood. with teeth T101AO T101B T101BR T101D T301CD 91 3 Softwood, plywood, laminated boards (1.-1mm) especially for curved cuts Softwood, chipboard, plywood, fibre boards (3-30mm), plastics/epoxy Softwood, chipboard, plywood, fibre boards (3-30mm), laminated boards, splinter free surface due to down cutting action Softwood, chipboard, plywood, fibre boards (10-4mm) Softwood, chipboard, plywood, fibre boards (10-6mm) Precision for Wood - precise cut HCS CARBON STEEL ground edge, accurate cuts with precise angles. with teeth A3 T144DP 74 4 Chipboard, plywood, fibre boards, softwood (-0mm) doors, kitchen surfaces VY 10/16 Reproduction, even in part, prohibited. Printed in UK. Progressor for Wood - fast & clean, HCS CARBON STEEL ground edge, thick and thin material. with teeth Speed for Hard Wood - fast cut BI METAL ground edge, fast cut in Hard Wood T234X Clean for Hard Wood - Clean cut BI METAL ground edge for fine cuts in Hard Wood. with teeth with teeth T144DF T101AOF Softwood (2-6mm), chipboard, plywood, fibre boards, clean Hard and softwood (-0mm) All board types, including laminated boards Hardwood, laminated boards (1.-1mm), fibreglass, reinforced plastics, plywood, especially for curved, splinter free

3 RECA Jigsaw s for Wood RECA CV4 manufactured from chrome vanadium steel. Side set angular edged toothing. Ideal for types of wood <0mm RECA Swing manufactured from chrome vanadium steel, tooth backed. Side set angular edged toothing. Ideal for types of wood <0mm, curved cut RECA CV2 / CV2R manufactured from chrome vanadium steel. Angular edged toothing, CV2R reverse*. Ideal for types of wood and plastic <30mm VY 01/18 Reproduction, even in part, prohibited. Printed in UK * RECA CV4 manufactured from chrome vanadium steel. Angular edged toothing. Ideal for types of wood and plastic <0mm

4 RECA Jigsaw s for Wood RECA Twist manufactured from chrome vanadium steel. Angular edged toothing, toothed tip. Suitable for softwood, plywood and coated boards <1mm, curved cut RECA Uni Speed W manufactured from chrome vanadium steel. Angular edged toothing with progressive tooth pitch. Suitable for softwood up to 6mm, particle board, wood core plywood and fibre board. Bosch Jigsaw s for Metal Basic for Metal - Cost effective HSS HIGH SPEED STEEL - milled VY 01/18 Reproduction, even in part, prohibited. Printed in UK. with teeth T118A Thin metal plate (1-3mm) T218A Same as T118A, especially for curved cuts T318A Thin metal plate (1-3mm), pipes and profiles, incl. aluminium (up to 6mm) T118B 1 2 Medium-thick sheet metal (2.-6mm) T318B Medium-thick sheet metal (2.-6mm), pipes and profiles, aluminium (up to 6mm) Progressor for Metal - Fast, thick and thin materials HSS HIGH SPEED STEEL - milled. with teeth T123X Special for Alu - Aluminium and non-ferrous metal HSS HIGH SPEED STEEL - milled. with teeth T127D 74 3 Thin to thick metal plate (1.-10mm), pipes and profiles, incl. aluminium (up to 30mm) Thin to thick metal plate (3-1mm), pipes and profiles (up to 30mm)

5 RECA Jigsaw s for Metal RECA HSS 0.7 manufactured from HSS Steel. Teeth milled and crimped. Suitable for thin sheet metal mm RECA HSS 1.2 manufactured from HSS Steel. Teeth milled and crimped. Suitable for thin sheet metal 1.2-2mm RECA Bimetal 1 manufactured from Bimetal. Teeth milled and crimped. Suitable for steel and thin sheet metal 1.0-3mm VY 01/18 Reproduction, even in part, prohibited. Printed in UK RECA Bimetal 2 manufactured from Bimetal. Teeth milled and crimped. Suitable for steel and thin sheet metal, non-ferrous base metals and aluminium mm

6 RECA Jigsaw s for Metal RECA Twist manufactured from Bimetal. Teeth milled and crimped, curved cut. Suitable for thin to medium sheets mm RECA Unispeed M manufactured from Bimetal. Teeth milled and side set with progressive pitch. Suitable for thin to thick sheets mm, pipes and profiles inc. aluminium (diameter <30mm) RECA Swing manufactured from HSS steel, tooth backed. Teeth milled and crimped, curved cut. Suitable for steel <30mm, non-ferrous based metal, aluminium and plastic VY 01/18 Reproduction, even in part, prohibited. Printed in UK

7 RECA Specialist Wood / Plastic RECA Unispeed U manufactured from Bimetal. Toothing side set with progressive tooth pitch. Suitable for timber with nails up to 6mm, wood-based materials, plastics, sheet metal, pipes and profiles, inl. aluminium (3 to 10mm diameter) Stainless RECA Bimetal 1.4 manufactured from Bimetal. Teeth milled and crimped. Suitable for thin, stainless steel sheeting from 1.mm to 4mm RECA HM 3.3 with ground toothed strip produced from cemented carbide and conically ground. Suitable for glass-fibre-reinforced plastics (GFRP) up to 6mm and Corian.0-20mm VY 01/18 Reproduction, even in part, prohibited. Printed in UK RECA HM 4.2 with conically ground, side-set and carbide-tipped toothing. Suitable for glass-fibre-reinforced plastics (GFRP) from.0 to 20mm, gypsum plasterboard and cement fibreboards from.0 to 0mm

8 RECA Sabre Saw s for Wood Colour coded on blade for different materials and pictograms on labelling for ease of identification. Manufactured from high quality material: Bi-Metal blades are longer lasting as they can withstand the heat generated when cutting metal. Conversion Chart New RECA Art. Old Reca Art. No. No. Bosch Wurth Metal S922EF S922BF S920CF S1120CF Wood Cut L DF Wood/Metal S922VF S1222VF Specialist S1130 RIFF SS18EHM RECA Specialist Sabre Saw s Cast and Brick RECA Handle for Sabre Saw s A new multi handle, this can be used to lock sabre saw blades firmly in place. The locating seat holds all sabre saw blades with a standard ½ universal shank. A new added feature is that the handle will also hold ¼ standard bits, just turn the fastening ring (lock open) in the desired direction. Up to 6 x 2mm bits can be stored in the cap of the handle. The shape and grip of the handle mean that it is also well suited as a screwdriver handle Specialist blade for cast iron, red brick and ceramic, glass fibre reinforces plastic / epoxy VY 01/18 Reproduction, even in part, prohibited. Printed in UK Stainless Steel 18 Ideal for stainless sheet and profile <0mm, GRP and epoxy (inch)

9 Bosch Sabre Saw s for Wood Progressor for Wood - Effortless, fine cut HCS CARBON STEEL side set, ground. Overall Tooth Pitch Length Chipboard and MDF (6-60mm), construction wood (nail free) (6-10mm). Plunge cutting in wooden panelling S234X 200 Progressive Top for Wood - Ideal for cutting wood outdoors HCS CARBON STEEL side set for straight & curved cutting, ground. Overall Tooth Pitch Length Flexible for Wood & Metal Variable tooth spacing. Bi-Metal side set and milled. Ideal for nail embedded wood S644D 10 6 Construction wood (nail free) (6-100mm). Plunge cutting in wooden panelling S131L 240 Rough wood (nail free) (1-190mm), damp wood (pruning) Bosch Sabre Saw s for Wood & Metal Overall Tooth Pitch Length S922HF Pallets, wood with nails/metal inserts (-100mm), sheet metal, pipes + aluminium profiles (3-12mm) S1122HF Pallets, wood with nails/metal inserts (-17mm), sheet metal, pipes + aluminium profiles (3-12mm) S1122VF Sheet metal, pipes + aluminium profiles, (3-10mm) plastic, material/fibreglass (3-17mm), wood with nails (-17mm) S1222VF Sheet metal, pipes + aluminium profiles, (3-10mm) plastic, material/fibreglass (3-20mm), wood with nails (-20mm) Progressor for Wood & Metal Optimised for general use. Bi-Metal side set and milled VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Overall Length Tooth Pitch S346XF 200 Progressive Construction timber with nails (-10mm), metal pipes + profiles (3-18mm), PVC pipes/fibreglass (8-10mm) Bosch Sabre Saw s for Wood & Metal Heavy for Wood & Metal - Optimised for general use Bi-Metal side set and milled. Overall Tooth Length Pitch S1411DF PVC pipes, fibreglass (-60mm), light building blocks (10-20mm), wood with nails/metal inserts (10-20mm) Demolition / timber building renovation, wood with S1110DF nails/metal inserts (10-17mm), wooden boards + joists (10-17mm), plastic material/fibreglass (8-0mm)

10 RECA Sabre Saw s for Wood Greenwood Combo Fresh or wet wood, pruning green wood < 190mm (inch) / 6.3 / Window 6 Length 10mm, ideal for wood with nails, chipboard <100 / 20mm, plastic profile <100 / 20mm, GRP, epoxy <0 / 60mm (depending on blade length) (inch) RECA Sabre Saw s for Wood / Metal Combo 10 / 14 For metal and wood with metal residue, steel from 2.mm, especially suitable for pallet repair <110/240mm (depending on blade length) VY 08/17 Reproduction, even in part, prohibited. Printed in UK. (inch) / / / /

11 Bosch Sabre Saw s for Metal Basic for Metal - for thin and thick materials HSS HIGH SPEED STEEL Wave set and milled. Overall Length Tooth Pitch S918B Medium thick sheet metal (2-8mm), pipes + profiles (10-100mm) Flexible for Metal - for thin and thick materials bi-metal - side set and milled. Fast, straight cuts, flexible and break resistant. Overall Length Tooth Pitch S922AF S1122AF S922EF S1122EF S922BF S1122BF Thin sheet metal (0.7-3mm), pipes + profiles (-100mm) Thin sheet metal (0.7-3mm), pipes + profiles (-17mm) Thin sheet metal (1.-4mm), pipes + profiles (-100mm) Thin sheet metal (1.-4mm), pipes + profiles (-17mm) Thick sheet metal (3-8mm), pipes + profiles (10-100mm) Thick sheet metal (3-8mm), pipes + profiles (10-17mm) Progressor for Metal - Optimised for use in thick and thin metals. Bi-Metal side set and milled progressive tooth spacing, for fast cut, long life VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Overall Length Tooth Pitch S123XF 10 Progressive Heavy for Metal - Optimised for use in medium thick and thick metals. Bi-Metal - side set & milled. Overall Length Tooth Pitch S102BF S102VF S920CF Thin + thick sheet metal (1-8mm), thin + thick profiles (-100mm) Medium thick/thick sheet metal (2-8mm), pipes + profiles (190-10mm) Medium thick/thick sheet metal (2-12mm), profiles + pipes (10-10mm) Steel plate (4-10mm), pipes + profiles (20-100mm)

12 RECA Sabre Saw s for Metal Sabre saw blade for thin metal sheeting, pipes and profiles made of metal. Metal 18 Thin sheet metal (1.-4mm), pipes / profiles (<100 /10mm depending on blade length). (inch) Metal 14 Thick sheet metal (3-8mm), solid pipes/profiles (ø 10 to <100 / 17mm - depending on blade length). (inch) VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Robust Combo Heavy metal plate (4-12 mm), thick walled pipe and profile <100mm, ideal for pipe cutting and rescue/demolition. (inch) / / / /

13 Evolution Circular Saw Range EVO MM (7 ) TCT steel cutting circular saw, mm (2-3/16 ) depth of cut through 6mm (1/4 ) steel plate, 1200 watt motor, complete with carry case & 12 months warranty EVO230 Xtreme with laser guidance - 230MM (9 ) TCT steel cutting circular saw, 84mm (3-1/4 ) depth of cut through 13mm (1/2 ) steel plate, 170 watt high torque motor, complete with carry case & 12 months warranty EVO3 Raptor Cut Off Saw Watt, 230V motor, 1300rpm no load blade speed. 3mm dia. TCT blade / 2.4mm bore dia. Box cut capacity at 90 O - 120x120mm square, 94x180mm rectangle (6mm wall). Tube / pipe capacity at 90 O - 130mm (6mm wall). Box cut capacity at 4 O - 89x89mm square, 78x110mm rectangle (6mm wall). Tube / pipe capacity at 4 O - 10mm (6mm wall) Evolution circular saws DO NOT come with a saw blade. For our full range of blades please see below VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Mild steel cutting circular saw blade. 180mm mm mm Stainless steel cutting circular saw blade. 180mm mm Wood cutting circular saw blade. 180mm mm Aluminium cutting circular saw blade. 180mm mm mm mm blades bore size 20mm, 230 and 3mm bore size 2.4mm. Standard Equipment Supplied With Unit: 1 x Carry Case, 1 x Side Handle, 1 x Fence Guide, 1 x Safety Goggles, 1 x mm Hex key for M6 screws, 1 x 6mm Hex key for M8 screws and Operating Instructions. Ear defenders and eye protection MUST be worn whilst operating this equipment. Do NOT touch the blade whilst it is in motion. Always follow the Personal Protection Equipment (PPE) recommendations whilst operating this tool

14 Bosch Speedline Circular Saw s Quick straight separating cuts along and across the grain in solid wood and wood combination materials. One concave flat tungsten carbide tooth for efficient chip clearance. Two concave alternate tungsten carbide teeth for quick cutting. Special tooth support enables a controlled cut and high strength. Laser cut blade body for vibration free cutting. Application Range for portable saws - Rip cuts and cross cuts in softwood, hardwood, chipboard, formwork boards and plywood. Dia. Kerf Bore Number of mm mm Teeth /16* /16* *With reduction ring Bosch Mitre & Radial Arm Saw s Very clean and true cut edges. Teeth can be re-sharpened several times. Negative chip angle for high cutting quality. Improved exit angle for increased safety. Diamond ground tungsten carbide teeth. Suitable for use with mitre and radial saws VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Application Range for table saws - Softwood - cross cut & fine cut, chipboard - laminated on one side or veneered, plywood and veneered plywood & fibre boards MDF. Dia. Kerf Bore Number of mm mm Teeth

15 RECA Zakko Circular Saw With modern technology the tungsten carbide teeth on your circular saw blade should not detach at the first sign of a wire nail, but they do. The RECA Zakko changes all that and goes a long way further. Dia. Bore in Teeth Economical mm R.P.M The RECA Zakko may look like an ordinary TCT circular saw blade but it doesn t perform like one. Sounds unbelievable but the RECA Zakko gives super clean cuts in metal, wood, plastics, pipes, copper, brass, aluminium, compounds and profiles. Suitable for use on power hand saws, table saws, mitre and chop saws. This product is not for use on angle grinders. No need to worry about the number of teeth required. Simply choose the correct diameter and bore as one blade will cut all the above materials. Please note it is strongly advised that all materials are correctly clamped to avoid the risk of cut material causing damage. All machines should be fitted with the correct safety guard. Rippa Carbide Tipped Saw VY 08/17 Reproduction, even in part, prohibited. Printed in UK. A viable alternative for a chain saw, that can also be used in many applications a chain saw cannot. The laminated steel centre with noise reducing slits: this greatly reduces both noise levels and vibration for the user. Carbide clusters inhabit the outer core of the blade. Bi directional: the blade can be run in either direction with no need to sharpen. Just turn the blade around again and again. A rugged blade that will rip through the tree roots, wooden board and planks, nails, rubber, plastic, abrasive blocks, soil, groundworks and fence panels. Ideal for the grounds maintenance division and forestry work. Size 300mm with 20mm bore