50 Pennsylvania Avenue Warwick, Rhode Island Heavy-Duty Reciprocating Blades Designed Especially for Higher Amp Machines

Transcription

1 50 Pennsylvania Avenue Warwick, Rhode Island Anchors Heavy-Duty Reciprocating Blades Designed Especially for Higher Amp Machines Fire and Rescue specialists can t take chances with the blades they use. That s why they choose the Lenox 650R or 960R Demolition blade. 2 per pack Blade Length x Width x Thickness Teeth Per No. Inches Inch (25mm) Application 650R 6 x 3/4 x /14 Extended Life when Stainless steel: 3/16" - 3/4" (5-20mm) 6514R 6 x 3/4 x cutting pipe, Stainless steel: 3/32" - 3/8" (2.5-10mm) structural steel and 6518R 6 x 3/4 x stainless steel. Fire Stainless steel: 1/16" - 1/4" (1.5-6mm) 9514R 9 x 3/4 x and rescue. Stainless steel: 3/32" - 3/8" (2.5-10mm) Tuff Tooth Drilling, Tapping When You Need to Cut the Extreme 2 per pack Demolition Reciprocating Blades The Ultimate Cut Blade Length x Width x Thickness Teeth Per No. Inches Inch (25mm) Application 6066R 6 x 7/8 x Demolition work in nail-embedded wood 966R 9 x 7/8 x Demolition work in nail-embedded wood 960R 9 x 7/8 x Demolition work in wood and metal. Fire and rescue. 106R 12 x 7/8 x Demolition work in nail-embedded wood Strut Tuff Tooth Featured here is the Lenox 966R cutting cleanly through angle iron, wood and metal pipe - all at the same time. Would you expect that from a wood-cutting blade? Firestop Another Lenox first - thicker, stronger blades made especially for higher amperage machines. Heavy-duty reciprocating saw blades are designed for use in metal cutting applications and are 44% thicker than standard blades, which increase blade life by eliminating blade whipping from side to side. Contractor Demolition blades are 77% thicker than standard blades, making them ideal for rehab work, rescue and demolition work.

2 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping 2 per pack Master-Grit Reciprocating Blades Your Only Option On Abrasives Blade Length x Width x Thickness No. Inches Millimeters Edge Application 600RG 6 x 3/4 x x 20 x.8 Medium Cast iron, fiberglass, ceramic 800RG 8 x 3/4 x x 20 x 1.0 Carbide wall tile, clay pipe, stone, 100RG 10 x 3/4 x x 20 x 1.3 Grit brick, plaster, marble. E-Style & E-R Blades are Virtually Unbreakable Master-Grit s tungsten carbide grit edge looks different from regular blades because it is different. It is the only edge that will cut abrasives like fiberglass, granite, cement, plywood, and the list goes on... Strut Firestop Contractor 5 per pack E-Blade Length x Width x Thickness Teeth Per No. Inches Millimeters Inch (25mm) Application E 5-1/2 x 1 x x 25 x Pipe, structural steel, stainless steel, E 8 x 1 x x 25 x non-ferrous metal: 5/32" (4mm) and thicker. Nail-embedded wood. 5 per pack E-R Blade Length x Width x Thickness Teeth Per No. Inches Millimeters Inch (25mm) Application ER 5-1/2 x 1 x x 25 x Pipe, structural steel, stainless steel, ER 7-7/8 x 1 x x 25 x non-ferrous metal: 5/32" (4mm) and thicker. Nail-embedded wood ER 11-3/4 x 1 x x 25 x.9 10/14 Flexible blade. Nail-embedded wood, pallets. Metal 1/8" - 1/2" (3.2-13mm) thick. Lenox Master-Grit carbide grit edge reciprocating saw blades' super hard (RA 90-93) cutting edge easily cuts through the abrasive materials that quickly dull standard tooth blades. The less aggressive cutting edge smoothly cuts through materials that standard blades would snag, chip, or otherwise damage. E-Style & E-R bi-metal reciprocating saw blades are ideal for cutting pipe and metals, including stainless steel and nail-embedded wood. Their tough, shock resistant alloy teeth withstand high cutting temperatures, making the blades last longer than any other blades.

3 50 Pennsylvania Avenue Warwick, Rhode Island Length Teeth No. No. No. x Width Per 5 Per 2 Per Bulk Packed x Thickness Inch Pack Pack 25 Per Pack Inches (25mm) Shape Application 656R - B656R 6 x 3/4 x Roughing-in work and nail-embedded 156R - B156R 12 x 3/4 x wood. Fast cutting. Pipe, structural steel, stainless steel, non-ferrous 956R - B956R 9 x 3/4 x metal: 3/16" (5mm) and thicker. 676RC x 7/16 x Contour cutting in all woods, nail-embedded wood and composition materials. 606R - B606R 6 x 3/4 x Fast cutting for wood, composition materials, plastics, and non-ferrous metal. 634R x 3/4 x Extra fast cutting in thick, nail-free wood. 610R - B610R 6 x 3/4 x Nail-embedded wood, composition materials, and plastics. Pipe, carbon 810R - B810R 8 x 3/4 x steel, stainless steel: 1/8" - 1/4" (3.2-6mm). 110R - B110R 12 x 3/4 x /14 Non-ferrous metal: 1/8" - 1/2" (3.2-13mm) thick. 314RC x 1/4 x Contour cutting in wood < 3/4" (20mm) thick and in metal 3/32" - 5/16" (2.5-8mm) thick. 414R - B414R 4 x 3/4 x Pipe, structural steel, stainless steel: 3/32" - 1/4" (2.5-6mm). 614R - B614R 6 x 3/4 x Non-ferrous metal: 3/32" - 3/8" (2.5-10mm). Hard rubber. 418R - B418R 4 x 3/4 x Structural steel, pipe, conduit, stainless 618R - B618R 6 x 3/4 x steel: 1/16" - 3/16" (1.5-5mm) thick. Non-ferrous metal: 1/16" - 5/16" (1.5-8mm). 818R - B818R 8 x 3/4 x Anchors Drilling, Tapping 318RC x 1/4 x Contour cutting in metal: 1/16" - 1/8" ( mm) thick. 424R - B424R 4 x 3/4 x All metals less than 1/8" (3.2mm) thick. Tubing, conduit, trim. 624R - B624R 6 x 3/4 x RP x 3/4 x For plaster, plaster board, and lath. Bi-directional cutting. 636RP - B636RP 6 x 3/4 x RG - 6 x 3/4 x rg - 8 x 3/4 x.040 Medium Cast iron, fiberglass, ceramic tile, clay Carbide pipe, stone, brick, plaster, marble RG - 10 x 3/4 x.050 Grit R B6066R 6 x 7/8 x Demolition work in nail-embedded - 966R B966R 9 x 7/8 x wood R B960R 9 x 7/8 x Demolition work in wood and metal. Fire and rescue R B106R 12 x 7/8 x Strut Firestop Contractor - 650R B650R 6 x 3/4 x /14 Heavy-duty. Stainless steel: Extended life 3/16" - 3/4" (5-20mm) R B6514R 6 x 3/4 x when cutting Stainless steel: pipe, structural 3/32" - 3/8" (2.5-10mm) R B6518R 6 x 3/4 x steel and Stainless steel: stainless steel. 1/16" - 1/4" (1.5-6mm) R B9514R 9 x 3/4 x Fire and rescue Stainless steel: 3/32" - 3/8" (2.5-10mm).

4 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping Lenox Universal Style Bi-metal Jig Saw Blades. Length Teeth No. No. x Width Per 2 Per Bulk Packed x Thickness Inch Pack 25 Per Pack Inches (25mm) Application BT486J B486J 4-1/2 x 3/8 x Fast, Rough Cutting in Wood and Composition Material: 3/8"-2" (10-50mm) Thick. BT686J - 6 x 3/8 x Fast, Rough Cutting in Wood and Composition Material: 3/8"-3-1/2" (10-89mm) Thick. BT480J B480J 4-1/2 x 3/8 x Wood, Nail-Embedded Wood: 1/4" - 2" (6-50mm) Thick. All Steels: 1/8" - 1/2" (3.2-13mm). Soft Metals: 1/8" - 1" (3.2-25mm). BT356JF - 3-1/2 x 1-1/8 x.050 6/10 Flush Cutting in Wood: 1/4" - 1" (6-25mm) Thick. BT350JC - 3-1/2 x 1/4 x Contour Cuts in Wood: 3/16" - 1" (5-25mm) Thick. Soft Metals: 1/8" - 3/8" (3.2-10mm). BT456J - 4-1/2 x 5/16 x Ground Teeth for Fast, Clean Cutting in Wood, Plastic and Composition Material: 3/8" - 2" (10-50mm) Thick. BT416JC - 4 x 1/4 x Ground Teeth for Clean Contour Cuts in Wood, Plastic and Composition Material: 3/8" - 1-1/2" (10-38mm) Thick. BT450J B450J 4 x 5/16 x Ground Teeth for Fast, Smooth Cuts in Wood, Plastic and Composition Material: 3/16" - 1-1/2" (5-38mm) Thick. BT450JR - 4 x 5/16 x Ground Teeth for Chip-free Down Cutting in Formica, Laminate and Plastic: 3/16" - 1-1/2" (5-38mm) Thick. BT320JC - 3 x 3/16 x Ground Teeth for Fine Contour Cutting in Wood, Veneer, Laminate and Plastic: 1/16" - 1/2" (1.5-13mm) Thick. Strut Firestop Contractor BT340JV - 3-1/2 x 3/8 x /14 Wood, Plastic: 3/16" - 1" (5-25mm). Steels: 1/8" - 3/8" (3.2-10mm). Non-ferrous Metal: 1/8" - 3/4" (3.2-20mm). BT318JC - 3 x 3/16 x Ground Teeth for Contour Cuts in all Steels: 1/16" - 3/16" (1.5-5mm) Thick and Soft Metal: 1/16" - 5/16" (1.5-8mm). BT314J B314J 3 x 1/8 x Steels: 3/32" - 1/4" (2.5-6mm). Non-ferrous Metal: 3/32" - 3/8" (2.5-10mm). BT318J B318J 3 x 3/8 x Stainless Steel. Structural Steel: 1/16" - 3/16" (1.5-5mm). BT518J - 5-1/4 x 3/8 x Non-ferrous Metal: 1/16" - 5/16" (1.5-8mm). BT324J B324J 3 x 3/8 x Stainless Steel, Sheet Metal: 1/8" (3.2mm) Thick. Non-ferrous Metal 1/4" (6mm) Thick. BT424J - 4 x 3/8 x Cordless Saws. Sheet Metal: 1/8" (3.2mm) Thick. Non-ferrous Metal 1/4" (6mm) Thick. BT332J - 3 x 1/8 x Thin Stainless Steel, Sheet Metal 1/16" (1.6mm). Non-ferrous Metal 1/8" (3.2mm) Thick. GT300J - 3 x 5/16 x.032 Medium Cast Iron, Fiberglass, Ceramic Tile, Hard Plaster. Carbide Grit

5 50 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping Strut Firestop Contractor Lenox T Shank Style Bi-metal Jig Saw Blades. Length Teeth No. No. x Width Per 2 Per Bulk Packed x Thickness Inch Pack 25 Per Pack Inches (25mm) Application BT406S B406S 4-1/2 x 3/8 x Fast, Rough Cutting in Wood and Composition Material: 3/8" - 2" (10-50mm) Thick. BT686S - 6 x 3/8 x Fast, Rough Cutting in Wood and Composition Material: 3/8" - 3-1/2" (10-89mm) Thick. BT410S B410S 4-1/2 x 3/8 x Woods: 1/4" - 2" (6-50mm) Thick. All Steels: 1/8" - 1/2" (3.2-13mm). Soft Metals: 1/8" - 1" (3.2-25mm). BT456S - 4-1/2 x 5/16 x Ground Teeth for Fast, Clean Cutting in Wood, Plastic and Composition Material: 3/8" - 2" (10-50mm) Thick. BT416SC - 4 x 1/4 x Ground Teeth for Clean Contour Cuts in Wood, Plastic and Composition Material: 3/8" - 1-1/2" (10-38mm) Thick. BT450S B450S 4 x 5/16 x Ground Teeth for Fast, Smooth Cuts in Wood, Plastic and Composition Material: 3/16" - 1-1/2" (5-38mm) Thick. BT450SR - 4 x 5/16 x Ground Teeth for Chip-free Down Cutting in Formica, Laminate and Plastic: 3/16" - 1-1/2" (5-38mm). BT320SC - 3 x 3/16 x Ground Teeth for Fine Contour Cutting in Wood, Veneer, Laminate and Plastic: 1/16" - 1/2" (1.5-13mm). BT340SV - 3-1/2 x 3/8 x /14 Wood, Plastic: 3/16" - 1" (5-25mm). Steels: 1/8" - 3/8" (3.2-10mm). Non-ferrous Metal: 1/8" - 3/4" (3.2-20mm). BT318SC - 3 x 3/16 x Ground Teeth For Contour Cuts in Steel: 1/16" - 3/16" (1.5-5mm) Thick and Soft Metal: 1/16" - 5/16" (1.5-8mm) Thick. BT314S B314S 3 x 3/8 x Steels: 3/32" - 1/4" (2.5-6mm). Non-ferrous Metal: 3/32-3/8" (2.5-10mm). BT318S B318S 3 x 3/8 x Stainless Steel, Structural Steel: 1/16" - 3/16" (1.5-5mm). Non-ferrous Metal: 1/16" - 5/16" (1.5-8mm). BT518S B518S 5-1/4 x 3/8 x BT324S B324S 3 x 3/8 x Stainless Steel, Sheet Metal: 1/8" (3.2mm) Thick. Non-ferrous Metal 1/4" (6mm) Thick. BT424S - 4 x 3/8 x Cordless Saws. Sheet Metal: 1/8" (3.2mm) Thick. Non-ferrous Metal 1/4" (6mm) Thick. BT332S - 3 x 3/8 x Thin Stainless Steel, Sheet Metal: 1/16" (1.6mm). Non-ferrous Metal 1/8" (3.2mm) Thick. GT300S 3 x 5/16 x.032 Medium Cast Iron, Fiberglass, Ceramic Tile, Hard Plaster. Carbide Grit 7 Piece Assortment: U743JA. One each 486J, 480J, 340JV, 450J, 314J, 318J, 324J. Lenox Bayonet Style Bi-metal Jig Saw Blades. Length Teeth No. x Width Per 2 Per x Thickness Inch Pack Inches (25mm) Application BT336B 3 x 3/8 x Wood, Fast Cut, Rough Cut. BT330B 3 x 3/8 x Wood, Nail-Embedded. BT130B 1-3/4 x 1/4 x Wood, Nail-Embedded. BT334B 3 x 3/8 x Metal Over 1/4" (6.4mm) Thick. BT134B 1-3/4 x 1/4 x Metal Over 1/4" (6.4mm) Thick. BT338B 3 x 3/8 x Metal Over 1/8" (3.2mm) Thick, General Purpose. BT138B 1-3/4 x 1/4 x Metal Over 1/8" (3.2mm) Thick, General Purpose. BT124B 1-3/4 x 1/4 x Thin Metal, Plastic, Polys, Paneling.

6 Pennsylvania Avenue Warwick, Rhode Island Hand Hacksaw Blades The Toughest Tooth for All Cutting Applications Anchors Drilling, Tapping 4012 High Tension Professional Hand Hacksaw Frame For Extended Blade Life and Faster Cutting Action Electron Beam Weld High Speed Steel Edge Blade One Blade. Many Cuts. Flexible Spring Steel Back Tuff Tooth 1. Lever tensions the 12" (300mm) hacksaw blade to 30,000 psi (21 kg. mm 2 ), about twice that of ordinary frames. 2. Mount blade at 45 for flush cutting jobs. 3. Use frame as a jab saw. Set screw holds blade in position. 4. Use as a compass saw with No. 156R reciprocating blade. 5. Store spare blades inside tubular back.. Teeth No. No. Length Per Bulk Packed 10 Per x Width Inch 100 Per Pack Pack Inches (25mm) 018HE V018HE 10 x 1/ HE V024HE 10 x 1/ HE V032HE 10 x 1/ V214HE 12 x 1/ HE V218HE 12 x 1/ HE V224HE 12 x 1/ HE V232HE 12 x 1/ Hand Hacksaw Frame Lightweight, All-Metal Strut Firestop Contractor 1 per pack/ 5 per box No High tension hand hacksaw frame 4012 hacksaw frame's heavy-duty cast aluminum handle and steel crossbar are the perfect balance of lightweight and super strength. This rugged frame can tension a hacksaw blade to 30,000 psi (21kg. mm 2 ), which is about twice that of ordinary frames. This provides the user with straight, fast, easy cutting. 1 per pack/ 5 per box No Heavy-duty aluminum handle hacksaw frame with 12" (300mm) bi-metal blade. Lenox bi-metal hand hacksaw blades with their Tuff Tooth design and tooth hardness of Rc are very flexible, have shock resistant teeth, resist heat and are virtually unbreakable. These features make them ideal for cutting tough materials like stainless steel hacksaw frame is economical and practical. The lightweight cast aluminum handle has an over-sized grip opening that provides room for hands with work gloves. The 2012 has the highest blade tension of any frame in its class. Space between the blade and zinc plated metal crossbar allows very thick materials to be cut.

7 50 Pennsylvania Avenue Warwick, Rhode Island Tri-Fold Saw Complete with Reciprocating Blade 975 Hacksaw *1 per pack/ 5 per box Anchors 1 per pack/ 5 per box No. 975 Rugged heavy-duty aluminum handle. Designed for hard-to-get-at-places. Cuts bolts, wire, tubing and plastic. Includes bi-metal 10" (250mm) blade. Close Quarter Saw No. 3636* Tri-Fold Saw Wood, drywall & non-metallic 3618* Tri-Fold Saw Metal Cutting Tri-Fold Saw with two blades: Plaster/ Wood and Metal Cutting PVC/ABS Plastic Pipe Hand Saw Drilling, Tapping 1 per pack/ 5 per box Saw - 1 per pack/5 per box Blades - 10 per pack No. 908 Close Quarter Saw 906 Replacement Blades 6" x 1/4" x.014 x 32T (150mm x 6.4mm x.35mm x 0.8mm) 975 hacksaw frame is designed to cut material in those hard-toget-at-places that standard frames cannot reach. Rugged heavy-duty aluminum construction and a compact, lightweight frame make this hand saw a convenient tool to have for any job. Close Quarter saw will reach into those tight spaces where standard hacksaw frames won't fit to make a cut. The Close Quarter saw will save you time and give you options in tight applications. Teeth Per No. Inch (25mm) HSF " (450mm) blade & handle 10 HSF " (300mm) blade & handle 10 HSB-18 18" (450mm) replacement blade 10 HSB-12 12" (300mm) replacement blade 10 FCBA* Flush cutting blade adaptor - *1 per pack/5 per box Lenox Tri-Fold saws are small enough to fit comfortably in your pocket, yet versatile enough to cut through any type of material. It locks into three different positions for cutting anything from wood to drywall, to stainless steel at any angle. Any reciprocating blade with a standard 1/2" (13mm) tang can be used in the saw. The saw features a heavy-duty aluminum handle, a comfortable hand grip and a fold away blade for safety and convenience. PVC/ABS hand saw's wide, rigid carbon steel blade with hardened teeth will breeze through any diameter plastic pipe, wood and nail-embedded wood. Its heavy-duty, lightweight aluminum handle features a comfortable hand grip and a large opening for maximum finger clearance, allowing room for work gloves. Strut Firestop Contractor

8 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping Strut Firestop Contractor Bi-metal Hole Saws Finally a Bi-metal Hole Saw that Cuts Fast. And Lasts. No. Diameter Pipe Tap Pipe Entr. Use Arbor 1 Per Box Inches mm Inches mm Inches mm Number 9L 9/ L, 1SL, 4L, 5L 10L 5/ L, 1SL, 4L, 5L 11L 11/ L, 1SL, 4L, 5L 12L 3/4 19 1/2 13 3/8 10 1L, 1SL, 4L, 5L 20MMHS 25/ L, 1SL, 4L, 5L 13L 13/ L, 1SL, 4L, 5L 14L 7/8 22 3/4 19 1/2 13 1L, 1SL, 4L, 5L 15L 15/ L, 1SL, 4L, 5L 16L L, 1SL, 4L, 5L 17L 1-1/ L, 1SL, 4L, 5L 18L 1-1/ /4 19 1L, 1SL, 4L, 5L 19L 1-3/ L, 1SL, 4L, 5L 20L 1-1/ L, 2SL, 3L, 6L 21L 1-5/ L, 2SL, 3L, 6L 22L 1-3/ L, 2SL, 3L, 6L 23L 1-7/ L, 2SL, 3L, 6L 24L 1-1/ / L, 2SL, 3L, 6L 25L 1-9/ L, 2SL, 3L, 6L 26L 1-5/ L, 2SL, 3L, 6L, 7L 27L 1-11/ L, 2SL, 3L, 6L, 7L 28L 1-3/ / /4 32 2L, 2SL, 3L, 6L, 7L 29L 1-13/ L, 2SL, 3L, 6L, 7L 30L 1-7/ L, 2SL, 3L, 6L, 7L 32L /2 38 2L, 2SL, 3L, 6L, 7L 33L 2-1/ L, 2SL, 3L, 6L, 7L 34L 2-1/ L, 2SL, 3L, 6L, 7L 36L 2-1/ L, 2SL, 3L, 6L, 7L 37L 2-5/ L, 2SL, 3L, 6L, 7L 38L 2-3/ L, 2SL, 3L, 6L, 7L 40L 2-1/ L, 2SL, 3L, 6L, 7L 41L 2-9/ L, 2SL, 3L, 6L, 7L 42L 2-5/ / L, 2SL, 3L, 6L, 7L 43L 2-11/ L, 2SL, 3L, 6L, 7L 44L 2-3/ L, 2SL, 3L, 6L, 7L 46L 2-7/ L, 2SL, 3L, 6L, 7L 48L L, 2SL, 3L, 6L, 7L 50L 3-1/ L, 2SL, 3L, 6L, 7L 52L 3-1/ L, 2SL, 3L, 6L, 7L 54L 3-3/ L, 2SL, 3L, 6L, 7L Bi-metal Hole Saws (Cont.) No. Diameter Pipe Tap Pipe Entr. Use Arbor 1 Per Box Inches mm Inches mm Inches mm Number 56L 3-1/ L, 2SL, 3L, 6L, 7L 58L 3-5/ L, 2SL, 3L, 6L, 7L 60L 3-3/ / L, 2SL, 3L, 6L, 7L 62L 3-7/ L, 2SL, 3L, 6L, 7L 64L L, 2SL, 3L, 6L, 7L 66L 4-1/ /2 89 2L, 2SL, 3L, 6L, 7L 68L 4-1/ L, 2SL, 3L, 6L, 7L 70L 4-3/ L, 2SL, 3L, 6L, 7L 72L 4-1/ / L, 2SL, 3L, 6L, 7L 74L 4-5/ L, 2SL, 3L, 6L, 7L 76L 4-3/ L, 2SL, 3L, 6L, 7L 80L L, 2SL, 3L, 6L, 7L 88L 5-1/ L, 2SL, 3L, 6L, 7L 96L L, 2SL, 3L, 6L, 7L The Lenox Advantage Always ahead of the competition, standard Lenox bi-metal hole saws feature a patented tooth design. This design results in extra sharp teeth, fast cutting and long blade life in a wide variety of applications, ranging from wood to stainless steel. That is why Lenox is the choice of professionals around the world. Hole Saw RPM Chart Size Mild Tool & Cast Inches mm Steel Stainless Iron Brass Aluminum 9/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

9 50 Pennsylvania Avenue Warwick, Rhode Island Hole Saw RPM Chart (Cont.) Size Mild Tool & Cast Inches mm Steel Stainless Iron Brass Aluminum / / / / / / / / / / / / / / Carbide Tipped Hole Saws Cut Abrasive Materials Lasts Up to 10 Times Longer than Standard Hole Saws Note: Carbide Tipped Hole Saws use standard arbors. However, we recommend the use of a carbide tipped pilot drill when using a carbide tipped hole saw as shown here cutting ceramic wall tile. Pilot drill 123CT fits the 1L, 1SL, 2L, 2SL, 4L or 7L arbor. Pipe Use No. Diameter Pipe Tap Entrance Arbor 1 Per Box Inches mm Inches mm Inches mm Number 11CT 11/ L, 1SL, 4L 12CT 3/4 19 1/2 13 3/8 10 1L, 1SL, 4L 14CT 7/8 22 3/4 19 1/2 13 1L, 1SL, 4L 16CT L, 1SL, 4L 18CT 1-1/ /4 19 1L, 1SL, 4L 20CT 1-1/ L, 2SL 22CT 1-3/ L, 2SL 24CT 1-1/ / L, 2SL 26CT 1-5/ L, 2SL, 7L 28CT 1-3/ / /4 32 2L, 2SL, 7L 32CT /2 38 2L, 2SL, 7L 34CT 2-1/ L, 2SL, 7L 36CT 2-1/ L, 2SL, 7L 38CT 2-3/ L, 2SL, 7L 40CT 2-1/ L, 2SL, 7L 41CT 2-9/ L, 2SL, 7L 42CT 2-5/ / L, 2SL, 7L 43CT 2-11/ L, 2SL, 7L 48CT /2 64 2L, 2SL, 7L 52CT 3-1/ L, 2SL, 7L 54CT 3-3/ L, 2SL, 7L 56CT 3-1/ L, 2SL, 7L 58CT 3-5/ L, 2SL, 7L 60CT 3-3/ / L, 2SL, 7L 64CT L, 2SL, 7L 66CT 4-1/ /2 89 2L, 2SL, 7L 68CT 4-1/ L, 2SL, 7L 72CT 4-1/ L, 2SL, 7L 76CT 4-3/ / L, 2SL, 7L 80CT L, 2SL, 7L 88CT 5-1/ L, 2SL, 7L 96CT L, 2SL, 7L 123CT Carbide Tipped Pilot Drill 1 Per Pack Carbide Tipped Hole Saw RPM Chart Size Fiber- Ceramic icle Cast Computer Inches mm Aluminum Plastic glass Tile Board Iron Formica Flooring 3/ / / / / / / / / / / / / / Suggested RPM's only. 56PD X 10X 12X 18X Hole Saw Arbors & For All of Your Drilling Needs 1 Per Pack Chuck Size Fits Arbor No. Inches mm No Pilot Drill 1/4 6 1L, 2L, 4L B4321 Pilot Drill* 1/4 6 1L, 2L, 4L 56PD Pilot Drill* 1/4 6 1SL, 2SL, 3L, 5L, 6L, 7L 123CT Carbide Tipped - - 1L, 1SL, 2L, 2SL, 4L, 7L Pilot Drill AA1 Arbor Adaptor** - - 1L, 1SL, 4L, 5L 18X 18" (450mm) 1/2 & 13 1L, 2L, 3L Extension larger 12X 12" (300mm) 1/2 & 13 1L, 2L, 3L Extension larger 10X 10" (250mm) 3/8 & 10 5L, 6L, 7L Extension*** larger 55X 5-1/2" (140mm) 1/2 & 13 1L, 2L, 3L Extension larger *Order Pilot Drills in multiples of ten. ** Arbor Adaptors 1 per pack. Order in multiples of five. *** Fits arbored hole saws AA1 Anchors Drilling, Tapping Strut Firestop Contractor

10 Pennsylvania Avenue Warwick, Rhode Island Bi-metal Hole Saw Kits Designed for Professional Trades Big Daddy 2000 Electrician Anchors Drilling, Tapping Hole Saw Arbors & (Cont.) Arbors 1L 1SL 2L 2SL 3L 2000G 3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", 2-1/2", 2-11/16", 3", 3-1/4", 3-3/8", 3-5/8", 3-3/4", 4-1/8", 4-1/2", 4-3/4" (19, 22, 25, 29, 35, 38, 44, 51, 54, 57, 64, 68, 76, 83, 86, 92, 95, 105, 114, 121mm). Arbors: 1L, 2L, 5L. Two 4321 and one 56PD pilot drills. Plumber 1200L 3/4", 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 2-11/16", 3", 3-5/8", 4-1/8", 4-3/4" (19, 22, 29, 35, 44, 51, 64, 68, 76, 92, 105, 121mm). Arbors: 2L, 5L. Two 4321 and one 56PD pilot drills. General Purpose 4L 5L 6L 7L 600P 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4" (19, 22, 29, 38, 44, 57mm). Arbors: 2L, 5L. One 4321 pilot drill. One arbor adaptor. Plumber 700G 7/8", 1", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2-1/8" (22, 25, 32, 35, 38, 44, 54mm). Arbors: 5L, 6L. One 56PD pilot drill. General Purpose Strut Firestop Contractor 1 Per Pack Fits Hole Shank Chuck Size No. Saws Type Inches mm 1L 9L-19L Hex 1/2 & larger 13 1SL* 9L-19L SDS - - 2L 20L-96L Hex 1/2 & larger 13 2SL* 20L-96L SDS - - 3L 20L-96L Solid/Hex 1/2 & larger 13 34L 9L-19L 3 sided 1/4 & larger 6 5L 9L-19L Hex 3/8 & larger 10 6L 20L-96L Hex 3/8 & larger 10 7L 26L-96L Hex 3/8 & larger 10 * To be used in SDS style drills that have the straight rotary drilling option. Lenox created the 7L ejector arbor to make removal of material from the inside of a hole saw much easier. By simply pushing the two long drive pins of the arbor through the two holes in the bottom of the hole saw, the material is forced from the hole saw, making jobs quick and easy for the user. 1200P 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4", 2-9/16", 3", 3-1/2", 4", 4-1/4", 4-1/2" (19, 22, 29, 38, 44, 57, 65, 76, 89, 102, 108, 114mm). Arbors: 2L, 5L. Two 4321 and one 56PD pilot drills. Electrician 600L 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2" (22, 29, 35, 44, 51, 64mm). Arbors: 2L, 5L. One 4321 pilot drill. One arbor adaptor. 1200G 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/2", 3" (16, 19, 22, 25, 29, 32, 35, 38, 44, 51, 64, 76mm). Arbors 1L, 2L. Three 4321 pilot drills. General Purpose 500G 2-1/8", 2-9/16", 3-1/4", 3-3/4", 4-3/4" (54, 65, 83, 95, 121mm). Arbor 2L. Three 4321 pilot drills.

11 50 Pennsylvania Avenue Warwick, Rhode Island Bi-metal Hole Saw Kits (Cont.) 400G General Purpose 2", 3", 3-3/8", 4-1/8" (51, 76, 86, 105mm). Arbor: 2L. Automotive 500A 3/4", 7/8", 1", 1-1/8", 1-1/4" (19, 22, 25, 29, 32mm). Arbor: 5L. One arbor adaptor. Refrigeration Lenox ProTool Lube Professional Lubricant for Cutting Tools Cutting Fluid Made by the People Who Understand Cutting Lenox ProTool Lube lubricant adds life to any cutting application from the easiest to the most challenging. It extends tool life and makes the cut cleaner. Bottle oz. (.17 liter) bottles ProTool Lube gallon (3.8 liter) container ProTool Lube gallon (18.9 liter) container ProTool Lube gallon (208.2 liter) drum ProTool Lube Material Safety Data sheets available upon request. Advantage Lenox ProTool Lube lubricant is a unique synthetic blend designed to lengthen tool life when cutting, milling, reaming, tapping and drilling metal, wood and plastics. This lubricant reduces heat and friction. It is water-soluble, so it cleans up with water and it is biodegradable and non-toxic. ProTool Lube allows for a smooth, fast cut, dramatically lengthening blade life, while shortening cutting time up to 50%. Vari-Bit Step Drill Bits Lenox Vari-Bits feature high speed steel construction and steam oxide coating. A patented design two cutting flutes allow for clean burr-free holes. These bits will cut through materials faster than standard bits, including stainless steel up to 1/8" (3.2mm) thick. 1 Per Pack U.S. Patent No Electric Number of Hole Sizes Drill Size Klein No. Hole Sizes Inches (mm) Inches (mm) Unibit Unibit VB1 13 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 1/4 / /8, 13/32, 7/16, 15/32, 1/2, 3, 4, 4.5, 5.5, & larger 6, 7, 8, 8.5, 9.5, 10, 11, 12, 12.5 VB2 9 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 3/8 / , 12.5, 14, 16, 17.5, 19, 20.5, 22, 23.5, 25 & larger VB3 9 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/8 / /4, 6, 8, 9.5, 11, 12.5, 14, 16, 17.5, 19 & larger VB4 6 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 1/4 / , 6, 8, 9.5, 11, 12.5 & larger VB6 2 3/8, 1/2 1/4 / 6 10, 12* , 12.5 & larger VB7 1 7/8 (22) 3/8 / [for 1/2" (12.5) conduit] & larger Anchors Drilling, Tapping Strut Firestop VB8 12 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/8 / /4, 13/16, 7/8, 4.5, 6, 8, 9.5, 11, 12.5, & larger 14, 16, 17.5, 19, 20.5, R 5/8", 7/8", 1-1/8", 1-3/8", 1-5/8", 2-1/8" (16, 22, 29, 35, 41, 54mm). Arbors: 5L, 6L. One 56PD pilot drill VB11 2 7/8, 1-1/8 (22, 28.5) 3/8 / ** [for 1/2" (12.5) and 3/4" (19) conduit] & larger VB12 5 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8 3/8 / 9.5 None None 22, 28.5, 31, 32, 35 & larger BVX8 Extension 8" (204mm). 1 per clam. Fits 3/8" (9.5mm) drill chuck & larger Contractor * Lenox Vari-Bit #6 combines Unibit #10 & #12. ** Unibit #13 has 1-1/8" (28.5mm) step only. Vari-Bit has both 7/8" (22mm) & 1-1/8" (28.5mm).

12 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping Vari-Bit Step Drill Bits (Cont.) Vari-Bit RPM Chart Vari-Bit Auto Electrical Sheet S.S. Electrical Stainless No. Aluminum Bodies Boxes I-Beams Metal Boxes Sinks # # # # # # # # # Master-Band Premium Portable Band Saw Blades A Portable Band Saw Blade For Every Cutting Need Thicker and with the Tuff Tooth design for the toughest cutting applications. 5 Per Box Wolf-Band Portable Band Saw Blades Length Teeth x Width Per x Thickness Inch No. Inches (mm) (25mm) Application PW-10/14 3' 8-7/8" (44-7/8") 10/14 1/4" (6mm) & larger x 1/2" x PW x 13 x.50mm 14 3/16" (5mm) - 3/8" (10mm) PW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) PW /32" (2mm) - 1/4" (6mm) PW up to 1/8" (3mm) 25 Per Box Length Teeth x Width Per x Thickness Inch No. Inches (mm) (25mm) Application PW-10/14 3' 8-7/8" (44-7/8") 10/14 1/4" (6mm) & larger x 1/2" x PW x 13 x.50mm 14 3/16" (5mm) - 3/8" (10mm) PW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) PW /32" (2mm) - 1/4" (6mm) PW up to 1/8" (3mm) Strut Firestop Contractor Per Box Length Teeth x Width Per x Thickness Inch No. Inches (mm) (25mm) Application EW-10/14 3' 8-7/8" (44-7/8") x 1/2" x /14 1/4" (6mm) & larger EW x 13 x.58mm 14 3/16" (5mm) - 3/8" (10mm) EW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) EW /32" (2mm) - 1/4" (6mm) EW up to 1/8" (3mm) EW-8/12 3' 8-7/8" (44-7/8") x 1/2" x.025 8/12 3/8" (10mm) - 1/2" (13mm) EW-10/ x 13 x.64mm 10/14 1/4" (6mm) & larger EW /16" (5mm) - 3/8" (10mm) EW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) EW /32" (2mm) - 1/4" (6mm) EW-10/14 4' 5-3/4" (53-3/4") x 1/2" x /14 1/4" (6mm) & larger EW x 13 x.58mm 14 3/16" (5mm) - 3/8" (10mm) EW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) EW /32" (2mm) - 1/4" (6mm) EW up to 1/8" (3mm) EW-10/14 4' 5-3/4" (53-3/4") x 1/2" x /14 1/4" (6mm) & larger EW-14/ x 13 x.64mm 14/18 1/8" (3mm) - 5/16" (8mm) EW-6/10 4' 6" (54") x 1/2" x.025 6/10 1/2" (13mm) & larger EW-8/ x 13 x.64mm 8/12 3/8" (10mm) - 1/2" (13mm) EW-10/14 10/14 1/4" (6mm) & larger EW-14/18 14/18 1/8" (3mm) - 5/16" (8mm) EW /32" (2mm) - 1/4" (6mm) Lenox bi-metal portable band saw blades have an 8% cobalt high speed steel alloy cutting edge. This alloy resists higher cutting temperatures than other high speed alloys or carbon blades and better resists tooth chipping. These features allow the blade to last much longer than other blades on tough materials like stainless steel, which gets very hot during cutting. Tungsten Grit Edge Portable Band Saw Blades and bulk packs available upon request.

13 50 Pennsylvania Avenue Warwick, Rhode Island Lenox Leader Automatic Feed Wood Bits Wood Boring Bits Anchors 1 Per Pack Entrance for Pipe Entrance for Diameter & Rigid Conduit Tubing No. Inches mm Inches mm Inches mm LL /2 13 7/8 22 LL /8 29 1/ LL /4 32 3/ /8 29 LL / /4 32 LL / /8 35 LL / / /2 38 LL / /8 48 LL / LL / /8 54 LL / /2 64 LL / / LL /8 per /2 89 LL /8 box / LS Leader Lead Screws (fits LL100-LL256) 5 Per Pack 34LS #34 Leader Lead Screws (fits LL300-LL462) 1 Per Pack 12SS Leader Set Screws (fits LL100-LL256) 5 Per Pack 34SS #34 Leader Set Screws (fits LL300-LL462) 5 Per Pack HWS Hex Wrench Set 1 ea. 1/8" (3.2mm), 5/32 (4mm) 1 Per Pack 55X 5-1/2 (140mm) Shank Extension* 1 Per Pack 12X 12" (300mm) Shank Extension* 1 Per Pack 18X 18" (450mm) Shank Extension* 1 Per Pack STF Slim Taper File With Handle 1 Per Pack *All have 1/2" (13mm) hex shank with 2 set screws to lock Leader in place. Lenox Leader bits with their precision ground teeth and outside diameter threads are designed for automatic feeding. Forged body design and strong construction allow freeflow chip removal. Leader bits cut very deeply, going through a 4x4 wooden beam without needing an extension and can be resharpened with a file. 1 Per Pack Entrance for Pipe Entrance for Diameter & Rigid Conduit Tubing No. Inches mm Inches mm Inches mm WB /2 13 7/8 22 WB /8 29 1/ WB /4 32 3/ /8 29 WB / /4 32 WB / /8 35 WB / / /2 38 WB / /8 48 WB / WB / /8 54 WB / / X 5-1/2" (140mm) Shank Extension* 1 Per Pack 12X 12" (300mm) Shank Extension* 1 Per Pack 18X 18" (450mm) Shank Extension* 1 Per Pack WBPS Extra Pilot Screw (fits all sizes) 5 Per Pack WBSS Extra Set Screw (fits all sizes) 5 Per Pack HWS Hex Wrench Set 1 ea. 1/8" (3.2mm), 5/32" (4mm) 1 Per Pack STF Slim Taper File With Handle 1 Per Pack *All have 1/2" (13mm) hex shank with 2 set screws to lock Leader in place. With two aggressive cutting edges, Lenox wood boring bits are self-feeding and easy to resharpen. Solid, one-piece construction with a black oxide rust inhibitor means that they cut fast and cut long without breaking or separating. Drilling, Tapping Strut Firestop Contractor

14 Pennsylvania Avenue Warwick, Rhode Island Anchors Drilling, Tapping Ship Auger Bits Lenox Augers cut stronger and last longer than other augers - period. Lenox Leader Wood Boring Bit, & Ship Auger Kits Product No / /400 One each of Leader bits: 1-3/8", 1-1/2", 2-1/8", 2-9/16" (35, 38, 54, 65mm). Extension: 5-1/2" (140mm). Five lead screws. Slim taper file with handle. Hex wrench set, Plastic case. Product No /700 Strut Firestop Contractor 1 Per Pack 7-1/2" (190mm) 18" (458mm) Hole Diameter Hole Diameter No. Inches mm No. Inches mm / / / / / / / / / / / / / / / / / / / / / / / V-7-AB Ship Auger File1 Per Pack / 5 Per Box ship auger bits perfectly concentric shape and precision machined design are perfect for wood and nail-embedded wood applications. The extra-thick, super-sharp cutting edge of the ship auger bit allows precise cutting action and long life in wood and nailembedded wood /700 One each of Leader bits: 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2-1/8", 2-9/16" (25, 29, 32, 38, 44, 54, 65mm). Extensions: 5-1/2" (140mm), 12" (300mm). Five lead screws. Slim taper file with handle. Hex wrench set. Plastic case. Product No / /500 One each of Wood Boring bits: 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2-1/8", 2-9/16" (29, 32, 38, 44, 54, 65mm). Extensions: 5-1/2", 12" (140, 300mm). Hex wrench set. One package of 5 pilot screws. One slim taper file with handle. Plastic case. Product No / /700 Augers: 7/8", 1-1/8", 1-1/4" (22, 28, 32mm). Length: 7-1/2" (190mm). Leaders: 1-1/2" 1-3/4", 2-1/8", 2-9/16" (38, 44, 54, 65mm). Extensions: 5-1/2" (140mm). Five lead screws. Sharpening file for Augers. Sharpening file for Leaders. Hex wrench set. Metal case.