15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
|
|
- Derek Bridges
- 5 years ago
- Views:
Transcription
1 Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle Retracts needle by turning body JAN A B 7864 C g 38g 2g A,B,C models come with superhard chip. D model is compact and can be stored easily in a tool box. C,E models can retract needle for good portability C,D,E models have replacement needles (sold separately) D 28 3g 7444 E Replacement of Scribing Needle g For scribing on general metal material, plastic, and wood JAN pc-pack for C g pc for D pc for E g 2g A B C Body : Iron Body : ABS resin Tip of Needle : Superhard chip D E Body : Brass Tip : Tungsten steel 34
2 Box : Sleeve package Card Box Clear package Divider 7309 Hard coating is applied on the tip Spring models allow easy fine-adjustment with screw For scribing circles or copying measurement of items 778 : Carbon steel (hardened point) Range of in Radius JAN 778 A cm 0 2g B 20cm C cm g 70g 7736 D 2cm g 7737 E 30cm g A cm with Spring B 20cm with Spring g 2g Divider with Super Hard Chip Scribes on hard metal even with hard chrome plate finish or heat treatment With long lasting tip 7720 Superhard chip tip Range of in Radius JAN For scribing circles or copying measurement of items 7720 A-2 cm 0 30g B-2 20cm g C-2 cm D-2 2cm g 300g Copying measurement Reading measurement Dividing equally 774 E-2 30cm g F-2 40cm g : Carbon steel (superhard chip tip) One-side Caliper The tip of one leg is shaped as needle. Scribe on a uneven surface 7320 Range of in Radius 7320 A cm 0 46g JAN As a scribing tool Needle scribes by hooking other leg on edge : Carbon steel (hardened point) 3
3 : Sleeve package Card Box Clear package Outside Caliper For outer dimension measurement that cannot be measured by vernier caliper 7338 Range of JAN A cm B 20cm g 77g : Carbon steel Inside Caliper For inner dimension measurement of pipe or hole 7323 : Carbon steel Range of JAN 7323 A cm 0 48g 7326 B 20cm g Taper Gauge Error occurs with the thickness of the gauge itself when measuring a circular hole. Inner diameter revision chart is on the back for better accuracy. (62600) Formula for revision Inner diameter= reading value (B) (A) Thickness of Taper Gauge (.2mm) Inner diameter (B) Reading value(a) Inner dimension measurement For measurement of inner diameter or dimension of gap Clearance gap measurement Thickness Accuracy Hardness.2mm ±0.0mm Stainless steel Hv400 or more Easy carrying No.700 A ~mm ~ g 6260 No.700 B ~30mm Measurement Range ~30 29g 6262 JAN Taper Gauge with rule Convenient portable tool combines Taper Gauge and rule Clip comes in handy for measuring depth or hanging in a pocket For measurement of inner diameter or dimension of gap For measuring length and depth 626 No.700 C 30~4mm 626 No.700 D 4~60mm mm with Metal Case mm with Rule 30~4 4~60 ~ ~ (~0) Rule 0g 70g 2g 2g Thickness Accuracy Hardness Taper Gauge Rule ±0.0mm ±0.mm ~mm 0~0mm Stainless steel Hv400 or more 36
4 Box : Sleeve package Card Box Clear package Radius Scale scale can be used as an R gauge, diameter gauge, and as a rule. Easy to pull out and measure due to its compact size Back Front Measurement of R, measurement of diameter and sheet thickness, and measurement of length. R measurement Diameter and sheet thickness measurement (reverse) Length measurement Back 737 Front A- R0.~7 A-2 R8~ g JAN Accuracy Measuring Range A- A-2 Stainless steel Radius Gauge: ±0.mm Diameter Gauge: ±0.0mm Straight Rule: ±0.mm Radius Gauge: R0.~7mm Diameter Gauge: 0.~6mm Straight Rule: 0~0mm Radius Gauge: R8~mm Diameter Gauge: 0.~6mm Straight Rule: 0~0mm Pitch Gauge For imperial For metric Finds pitch by aligning to screw thread For pitch measurement of general screws 6 threads screw per inch.0mm.0mm pitch screw Imperial Indicates the number of thread per inch on leaf Metric Indicates pitch in between two thread on leaf ~2.mm : Carbon tool steel Angle JAN A-2 for imperial : (for whitworth screw thread) B-2 for metric : A-2 for Inch Screw Thread 26 Leaves B-2 for Metric Screw Thread 28 Leaves g g Feeler Gauge A 7mm 9 Leaves B 0mm 9 Leaves g 27g JAN Variety of different length and leaves available For clearance gap measurement 7378 C 0mm 9 Leaves g D 6mm 2 Leaves E 0mm 2 Leaves F 0mm 2 Leaves g 9g 40g A B C D E F Carbon tool steel Thickness Tolerance Over 0.03mm below 0.mm : ±0.00mm Over 0.mm below 0.0mm : ±0.02mm Over 0.0mm below 3.00mm : ±0.020mm Leaf Thickness Thickness tolerance is the tolerance for one leaf. In the case of use with multiple leaves, the tolerance is added together. 37
5 : Sleeve package Card Box Clear package Bolt & Nut Gauge Easily measure size of nut bolt just by putting on the gauge Measures different shapes of screws With inch/mm converting chart Easily measures the length as well JAN Bolt & Nut Gauge g ABS resin Dial Gauge With convenient lug to install on magnetic stand 7370 With lug To measure flatness To measure parallelism To measure irregularity mm/mm g 3 Accessory : Flat lid JAN Graduation 0.0mm Measuring Range 0~mm Outer Diameter φmm Dial Reading ± Whole Measuring Range Indication Error ±8μm Retrace Error μm Adjacent Pitch Error 8μm Measuring Force.N or less Adjacent pitch error as / revolution indication error Dial Indicator Two convenient stems are included. To measure flatness To measure parallelism To measure irregularity 737 Holds onto magnet stand by installing stem (included) Graduation 0.0mm Measuring Range 0~0.8mm φ8mm φ6mm Outer Diameter φ38.mm Dial Reading Wide Range Accuracy 3μm Accessory : Stem with dovetail 2 Gauge head spanner Retrace Error Adjacent Pitch Error 3μm μm JAN Measuring Force 0.4N or less mm/0.8mm g 3 Magnetic Stand For holding Dial Gauge / Dial Indicator Product Name A. Standard A-2. With Fine-Adjustment Device Magnet Base L8 W0 Hmm Central Pillar φ2 76mm Fine-adjust angle by turning the screw Supportive Pillar Installation Hole Adsorption Force φ 6mm φ 0mm φ6.0/8.mm 600N(60kgf) Please take extra care because absorption force varies greatly depending on thickness and material of object. JAN 7372 A Standard,340g 7373 A-2 Fine adjustment,36g 38
6 Box : Sleeve package Card Box Clear package Digital Thickness Caliper Easy-to-read 2mm character height LCD ZERO set switch gives a reference point and makes comparison measurement. Large handle makes easy holding Special case included For measuring thin object A 0.0mm/mm with Handle 26g JAN Measuring Range Graduation Indication Error Maximum Insert Depth Measuring Force Parallelism between Gauge Head and Anvil Diameter of Gauge Head and Anvil Power Source Auto Power Off 0~mm 0.0mm ±0.02mm 30mm.N or less ±8μm φmm pc Silver oxide cell SR44 Battery included is for monitoring use only and may not last as long. Approximately mins Inspection Mirror Mirror angle can be easily adjusted Expandable handle gives access to hard-to-see places. Magnifying mirror Mirror Frame 778 A- Circle 60mm Shaft Length 30mm 3g JAN Recessed surface mirror enlarges x A-2 Circle 36mm A-3 Oval 0x80mm 600mm 30mm 40g 6g For inspection or observation of car engines, inside and behind machines, etc. 777 A-4 Oval 2x0mm 600mm 42g Magnifying Mirror Shaft : Brass Mirror Frame : ABS resin Mirror : Glass Shaft Length JAN 7790 B- Circle 60mm 2x 30mm 3g B-2 Circle 36mm 2x B-3 Oval 0x80mm 2x 600mm 30mm 40g 6g 7789 B-4 Oval 2x0mm 2x 600mm 42g 39
7 : Sleeve package Card Box Clear package Inspection Mirror with LED Light Clear vision even in a dark and tight place With high brightness Shines a light on inspection point LED light (30,000mcd) by reflecting light in the mirror Compact for easy carrying Shaft can be extended in seven steps No light Folded Approx. 30mm A- Light on Folded Approx. 60mm D D- Circle 60mm D-2 Circle 36mm D-3 Oval 0x80mm Shaft Length 30mm 70g g 73g JAN Power Source The difference is only 30mm (approximately) Shaft : Brass Mirror : Glass, ABS resin Light : ABS resin 3x Alkaline batteries LR44 (included) Battery included is for monitoring use only and may not last as long. 748 D-4 Oval 2x0mm 7g Luminosity 30,000mcd Varies depending on usage situation Large Inspection Mirror C- 80mm Light and durable acrylic resin mirror Easy-to-hold elastomer resin grip Three step telescopic function makes it easy to store 20mm For inspection under the body of car For inspection in ceiling C-2 20mm For inspection of machines For inspection of sewer pipes 0mm Body : Aluminum, iron, ABS resin, Nylon resin, elastomer resin Mirror : Acryl resin The knob easily fixes the position of the mirror C-.2m Oval 80x20mm C-2 2.m Oval 20x0mm Elastic Size 0.~.2m 0.9~2.m 00g 70g JAN 40
8 Box : Sleeve package Card Box Clear package Chuck Wrench Choose from a variety of types for each model Tip Diameter For opening and closing the chuck of an electric drill Drill Chuck Size A A-2 B C D E 3mm for hobby use 0~3/6 inch mm 0~/4 inch 6.mm 0~3/8 inch mm 0~/2 inch 3mm Handle Length Head Diameter JAN 7882 A 3mm g 7896 A-2 3mm g 7884 B mm g 7887 C 6.mm 7. 46g Please securely tighten the drill chuck with the correct chuck wrench before using electric drill D mm g 7893 E 3mm 8 83g Auto Punch Strong Weak Easily marks a surface by pushing it down with one hand Accurately punches even on ceiling because there is no use of hammer Turns the head to adjust punching pressure One side of the grip is flat to prevents it from rolling over. (7737 and 7738 only) Durable superhard chip on the tip 7737 M with Flat Grip Prevent Rolling g L with Flat Grip Prevent Rolling M L g 80g 8g JAN For marking steel metals, aluminum, or other materials that are not hardened Body : Brass Tip : Superhard chip Grip : ABS resin Deburring Tool Compatible with three kinds of high-speed steel replacement blade for plastic, aluminum, brass, cast metal, steel, etc with Replacement Blade for S-/S-20/S-3 Replacement Blade 2pc-pack for S g 2g 3 JAN For chamfering and deburring of metal parts Body : Plastic Edge : High-speed steel 4
9 : Sleeve package Card Box Clear package Suction Lifter Max kg Max kg Max kg Max kg Convenient for transportation of items without handles. The indicated adsorption force is based on the use on mirror surfaces For transportation of refrigerators, furniture, glass board, etc Single A Single B Double A g 780g 984g 6 4 JAN Adsorption Force Single A Single B Double A Double B 2kg Body : Aluminum Lever : Aluminum Adsorption Face : Rubber 70kg Body : Aluminum Lever : Plastic Adsorption Face : Rubber 2kg Body : Aluminum Lever : Iron Adsorption Face : Rubber Adsorption Face Size φ23mm φmm φ0mm Double B One-touch g Digital Counter Easy to hold Easy-to-read large numbers Measures from -9,999 to 99,999 Switch to multiple functions by pushing a button Count down Button Count up Button Digital Counter g 6 JAN For counting the number of visitors, traffics, bird watching,etc. Measurement Range Power Source Auto Power Off ー 9,999~99,999 Body : ABS resin, AS resin, silicone, polyacetal resin, stainless steel 2x Alkaline batteries LR44(included) Battery included is for monitoring use only and may not last as long. 30 seconds "FULL" sign will be displayed if it counts over 99,999 "-FULL" sign will be displayed if it counts below -9,999 Counter Counts numbers simply by pushing the button Model A is used screwed onto a mount A Metallic Model with Stand g JAN For counting the number of visitors, traffics, bird watching,etc B Metallic Model C Blue Plastic Model C Yellow Plastic Model g 34g Specification A B C Measurement Range 0~9,999 Body : Iron Body : ABS resin Others : Synthetic resin Others : Synthetic resin 42
Bevels & Gauges. Measuring & Marking T-SLIDE BEVEL PLASTIC HANDLE T-SLIDE BEVEL - ABS HANDLE SLIDING BEVEL INDICATOR BEVEL PROTRACTOR
T-SLIDE BEVEL - ABS HANDLE For determining existing angles or transferring angles onto a workpiece Slotted hardened steel blade allows the user to accommodate a wide range of different size work pieces
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationStarrett Year End Sale! Electronic Caliper 799A Series. Best Buys on Starrett Products
JW DONCHIN CO. Starrett Year End Sale! Electronic Caliper 799A Series No. 799A 6/150 List Price $125.00 SALE PRICE $100.00 Best Buys on Starrett Products Electronic Caliper - No. 799A Series Electronic
More informationEach Height Master is supplied with a gauge block for reference-height setting. Fitted wooden case supplied. SPECIFICATIONS
Height Master SRIS 515 Models with the the staggered arrangement of blocks have two measuring faces on the same level, one facing up and the other down (except for 515-310). Staggered 20mm blocks (movable)
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationHAND TOOLS. Carpenters Square. Basic Combination Set 520 Series
Carpenters Square Steel base and ergonomic design for ease of use Allows positive location and clamping Offers fixed angles: 45, 90 With mini carbide scriber and level vial Squareness within 0.2mm / 300mm
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationLINEAR MEASUREMENT. Prof.H M Prajapati & Prof. A R Sankhla
LINEAR MEASUREMENT Introduction Classification Based on the type of standard Line measurement End measurement Based on precision Precise Direct: Vernier caliper, Micrometer Indirect: Telescopic gauge,
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationThese thickness gauges are especially handy for measuring thickness of small
Thickness s mm type These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material. The objects to be measured is clamped
More informationSeamers, Folding Tools & Brake
Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws
More informationInspection Kit Alignment, Measurement & Weld Measuring Gauges Model: IK-BACT13. Welders, CWI Inspectors, Instructors
Inspection Kit Inspection Kit Alignment, Measurement & Weld Measuring Gauges Model: IK-BACT13 Brief Aluminium Case Type Size: 430mm x 290mm x 35mm Welders, CWI Inspectors, Instructors Now You Can Design
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationComparative Measurement
Comparative Measurement H-1 TESA YA Bore Gauges TESA YA Complete Instrument SETS Specially designed for small bores from 0,47 up to 12,20 - Checking of dimension and bore form errors through 2-point measuring
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationProfessional welding tables
Professional welding tables WELDING TABLES ACCESSORIES STOPS PRESSURERS/CLAMPS/GRIPS BOLTS weldingmaster We are the manufacturers of modular welding tables. Weldingmaster tables are highly innovative products,
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationProtractors / Clinometers / Spirit levels
Protractors / Clinometers / Spirit levels Accuracy of clinometers/spirit levels according DIN 877 Graduation Flatness (µm) µm/m " (L = length in ) 50 10 4 + L / 250 > 50-200 > 10-40 8 + L / 125 > 200 >
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationMetrology (0) PROMO 13.1E. Resolution:.0005" (0.01mm).0005" (0.01mm) Grads
Metrology PROMO 13.1E Automatic off after 5 minutes with no loss of position Accuracy meets DIN862 Resolution:.0005" (0.01mm).0005" (0.01mm) Grads Call 00 44 (0)1835 863501 today IP67 Electronic Calipers
More informationProfessional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More information, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
CHPTER FEEER GGE Made of hardened alloy steel Meet DIN7 : ±(+T/8) µm, T is the thickness of leaves in µm leaf 7 - Thickness of leaves included () -.-..,.,.,.7,.8,.9,.,.,.,.,.,.,.,.,.,.,.,.,.7,.7,.8,.8,.9,.9,.
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationSQ2 User Instructions SQ2 Overview:
SQ2 User Instructions SQ2 Overview: The stationary circular saws including table, radial and chop saws are arguably the most important tools in the shop. They may also be the most difficult to reliably
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationBITS, NUTSETTERS, ADAPTERS
BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationASSIGNMENT 2. Textbook Assignment: 2-1. Levels are designed for which of the following purposes?
ASSIGNMENT 2 Textbook Assignment: "Levels," "Plumb Bulbs," "Scribers," "Squares," "Surface, Depth, and Height Gages," "Ring and Snap Gages and Gage Blocks," "Miscellaneous Measuring Gages," "Pliers and
More informationCAN BE INSTALLED DIGITAL DEPTH GAGE WITH EXTENSION BASE DATA OUTPUT 48-52, MM/INCH
E16 SPECIAL MEASURING JAWS GAGE *The mm measuring jaw can be customized according to design drawing or measurement item of workpiece Unit: to suit your particular requirements. E17 Digital Caliper (Tungsten
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationFACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT. Credit Hour System Metrology Lab 1 MDP 240 (1) Fixed gauges. Metrology laboratory
FACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT Report On: Credit Hour System Metrology Lab 1 MDP 240 (1) Fixed gauges Metrology laboratory Class No: B.N. Student Name Remark Signature
More informationLayout Tools. Marking and Layout Tools
Best Welds, Contour Sales Vendor Code: BWS, CON Welders & Pipe Fitters Rap-Around Double ruled so both the top and bottom surfaces can be used for layouts - it is never upside-down! Packaged in its own
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationCA03B. Measuring Equipment
CA03B Measuring Equipment Groz is a leading manufacturer of quality tools & precision equipment to industry worldwide. Over the years we have developed into a respected global leader. Our first class reputation
More informationModule-2 Lecture-2 Combination set, Vernier calipers. (Refer Slide Time: 00:16)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-2 Lecture-2 Combination set, Vernier calipers
More informationModule-3 Lecture-7 Limit guage-2. (Refer Slide Time: 00:12)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-3 Lecture-7 Limit guage-2 (Refer Slide Time:
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationPrecision Square SERIES 916. Precision Dial Square SERIES 7. Spring Dividers and Calipers SERIES 950 SPECIFICATIONS
Precision Square SERIES 916 Three types of square are available. All edges are hardened and precision ground. 916-402 with stand 916-213 Standard type 916-102 Beveled-edge type Size (H x W) Order No. Remarks
More informationModel: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5
SHEARER/PRESS BRAKE/ SLIP ROLL Model: 3-IN-1/1067x1.5 Model: 3-IN-1/1320x1.5 OPERATION MANUAL 1. USES This machine is used for shearing and bending low carbon plate (mild steel) or the other metal materials
More informationTools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File. 2. Cut the stock Place stock in vise and cut with hack saw
Purpose: MAKE CATAPULT ARM Step 1 Tools: Sharpie, Square, Vise, Hack saw, Ruler, Punch, Hammer, File Materials: Flat aluminum ½ inch stock (see picture below) Gloves required 1. Pick up the aluminum ½
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationMotorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationTOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationFITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
More informationAir Cooled Engine Technology. Roth 9 th Ch 2 Tools & Measuring Pages 21 43
Roth 9 th Ch 2 Tools & Measuring Pages 21 43 1. A combination wrench has one end and one end. Box & Open Square & Round Ratcheting & Gear 2. A or flare nut wrench is used on metal tubing connection fittings.
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
More informationTRUE TECHNICAL SERVICE MANUAL - ALL MODELS. DOORS/DRAWERS/LIDS
DOORS/DRAWERS/LIDS 55 56 NOTES DOORS/DRAWERS/LIDS Springs 97 TORSION SPRING REPLACEMENT GDM RADIUS FRONT - SWING DOOR INSTALLATION INSTRUCTIONS Tools Required (2) - 1 8" drift Punch (forged) Needle-Nose
More information45PC. TAP AND DIE SET
Model # 7560 7561 45PC. TAP AND DIE SET OPERATOR S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE Wear eye protection Use proper lubrication WARNING: FOR HAND CUTTING APPLICATIONS ONLY.
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationStage 2: Preparing the door (read in conjunction with Hole Drilling Options on back of Template).
There are three stages to fitting the CL100 mortise case: Stage 1: Marking out the position of the lock. Stage 2: Preparing the door by mortising and drilling holes. Stage 3: Fitting lock, door furniture,
More informationHello. & Welcome. tools to trust
www.grozusa.com Whilst every effort has been made to ensure accuracy of information given in this catalogue at the time of going to print, Dec 2012, our policy of continyous improvement determines the
More informationINSTRUCTION MANUAL Q-HYDRAULIC
Dat: 15.04.02 No: 94-BA 5039E/1b TABLE OF CONTENTS Part III 3.0 Type code explanation 3.1 Service connections 3.2 Impeller clearance adjustment 3.2.1 Wear of wearing parts 3.2.2 General notes to adjustment
More informationWORK SUPPORTS WORK SUPPORTS
COMPACT PNEUMATIC Part No. AMNS-S PNEUMATIC Part No. BJ370 PRECISION SUPPORT Part No. BJ371 Part No. BJ350 CYLINDRICAL Part No. BJ351 COIL SPRINGS FOR CYLINDRICAL Part No. BJ351-C REMOTE-CONTROL UNITS
More informationCombined Drills & Countersinks. Countersinks Chatterless with Hole
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca WINTER SALE Combined Drills & Countersinks High Speed Steel, TiN Coated & Cobalt 60º Plain Type 60 Angle (Series 115) 60 Angle TiN Coated (Series 08115)
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationUNIT 9 TOOLS FOR BASIC LAYOUT
UNIT 9 TOOLS FOR BASIC LAYOUT Tools for Basic Structure 9.1 Introduction Objectives 9.2 Tools for Scribing 9.3 Accessories 9.4 Summary 9.5 Key Words 9.1 INTRODUCTION The process of making reference mark
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationInstitute of Applied Technology
Institute of Applied Technology Year 12 Machining Semester 1 September 2013 1 Machining 2 Lets Warm Up Think, Pair, Share Minds On Activity Video 1 The Lathe Objectives After the completion of this unit,
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationCHISELS / PUNCHES. Innovation is our mission!
CHISELS / PUNCHES Innovation is our mission! 1 PAGE FLAT CHISELS 564 TILER S FLAT CHISELS 565 SLITTING CHISEL 565 JOINTING CHISELS 565 BRICKLAYERS CHISEL 566 POINTED CHISELS 566 ELECTRICIANS CHISEL 566-567
More informationMachining. Module 6: Lathe Setup and Operations. (Part 2) Curriculum Development Unit PREPARED BY. August 2013
Machining Module 6: Lathe Setup and Operations (Part 2) PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 Module 6: Lathe Setup and Operations (Part 2) Module Objectives
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More information12. Wings, Flaps, Ailerons and Struts
12. Wings, Flaps, Ailerons and Struts Fit Aileron Hinges Reference: Drawing 20270K2 Photo 12.1 Parts Required: 2007092 Aileron LS 200809N Aileron RS 2001394 Hinge 3/16 A1 (4) 2001694 Hinge Pin (4) PH0059N
More informationUNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
More informationMaintenance. Equipment for general applications in the work place
Equipment for general applications in the work place 184 Pipe Wrenches Heavy Duty Forged steel jaw provides maximum strength. Full floating hook jaw, provides instant grip, easy release. Large knurl and
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationMachine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
More information