Single Prong for Single-Hole Cards. Loop Type for Butterfly-Punched Cards

Size: px
Start display at page:

Download "Single Prong for Single-Hole Cards. Loop Type for Butterfly-Punched Cards"

Transcription

1 DISPLAY PRODUCTS

2 PEGBOARD Hooks For /8" or /4" perforated board (" spacing). These white polypropylene hooks are safe and lightweight. They won t cut skin like metal hooks can and they do not rust or tarnish. Displays look very clean, smooth and bright. Use with perforated board, corrugated rack and counter displays for lightweight carded products of all kinds. Single Prong for Single-Hole Cards XLS XLS 4 XLS 6 Prong Length (in.) Minimum order 00. Longer sizes and glass-filled nylon available on request. Special colours available (minimum 50,000 per size). 4 6 Loop Type for Butterfly-Punched Cards XLD XLD 4 XLD 6 Prong Length (in.) 4 6 Minimum order 00. Longer sizes and glass-filled nylon available on request. ADHESIVE STYRENE HQ8W HQW HQ0W White, pressure-sensitive foam adhesive back. These adhere to almost any clean, dry surface. HQ 8W HQ 0W HQ W Base Size (inches) -3/6 X -3/6 -/4 X X Hooks Per Sheet 3 Minimum order 00. Also available in clear (minimum 500 pcs.). Use suffix C instead of W. 58 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

3 Hooks CONTINUED MOULDED CLEAR POLYESTER (Unbreakable) W L B XR 0 XR XR 5 XR 7 XR 0 /8 dia. -/4 -/ - / / XW 5 XW 0 XW 5 XW 30 flat -/ -/ 3 XF 5 XF 0 /4 flat -/ XB 0 3/3 (top rib) XC Minimum order /6 -/4 / Bonding: Dissolve 5-0% acrylic in solvent. CLEAR POLYESTER CLIP-ON W L XJ 0 XJ XJ 5 3/3 -/4 -/ XK 5 XK 0 XK 30 XK 40 XS 5 XS 30 XS 40 Minimum order 000. /3 5/6 -/ 3 4 -/ 3 4 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 59

4 ALL-NYLON Hinges These colourful, distinctive hinges will never need oiling. They can be used anywhere, including kitchens, bathrooms, marine projects, etc., to make your products more attractive to the end-user. Folded Size HIN X X Minimum order 500 pairs. Colours: Blue, red, yellow. Specify colour when ordering. Also available: White, chocolate, beige, black (minimum order 5000 pairs). CLEAR ACRYLIC HIN A HIN 3A* Size -/ X -/ -/ X - Minimum order 00. *Also available in black or white. Other colours on request. Bonding: by solvent or 5-0% acrylic in solvent. PLASTIC FLAT Polyolefin Easily cut to size and may be installed with staples, nails or screws. Width Thickness 638-H 639-H 6-H -9/6 /6 /6 3/64 Sold in full rolls only (00 ft./roll). Colours: 638-H and 639-H stocked in black and white. Also available in brown (minimum 000 feet). 6-H available in clear (natural) only. 60 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

5 Hinges CONTINUED PLASTIC EDGE-MOUNTING This polypropylene hinge just slips over edge of material Panel Size /8 3/6 /4 / Sold in 6-ft. lengths only. Stock colour: White. Black & brown available (minimum 000 feet). Other sizes available. CONTINUOUS ACRYLIC PIANO This easy-to-apply hinge, moulded of special high strength acrylic, provides a trim, clean appearance. At the same time, it also adds extra strength and prevents warping C 00-06B 00-06W 00-C 00-B 00-W 00-8C 00-8B 00-8W 00-4C 00-4B 00-4W 00-36C 00-36B 00-36W 00-48C 00-48B 00-48W Simply align hinge properly and apply solvent. (Note: recessed channels restrict solvent flow to outer edges.) Neat and time saving. Description 6" Clear 6" Black 6" White " Clear " Black " White 8" Clear 8" Black 8" White 4" Clear 4" Black 4" White 36" Clear 36" Black 36" White 48" Clear 48" Black 48" White Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 6

6 CLEAR BUTYRATE Threaded Posts & Screws A clear fastener set used to bind loose leaf and sample books, offering easy access to replace sheets. Keep keys together. Fits 5.5mm (7/3") to 7mm (9/3") hole. Screws for all lengths are #8. BPS.50 BPS.375 BPS.500 BPS.65 BPS.750 BPS.875 BPS.000 Length /4 / 7/8 Minimum order 000. Packed 000 to a box. No broken packs. PRESS-TOGETHER LDPE Posts / Nylon Screws No tools required. Sets can be pressed together for easy, quick assembly into /4" holes. Screws must be unscrewed to open sets. Stock head is slotted, which is recommended where assembly modification is required. Screw lengths: /4" with /4" posts, " with " to " posts and.690" with " to " posts. Screws for all lengths are # Length Length WPS.50 WPS.375 WPS.500 WPS.750 WPS.000 /4 / WPS.50 WPS.375 WPS.500 WPS.750 WPS.000 -/4 - -/ - Minimum order 000. Standard colour: White LDPE/white nylon. Black available at an extra charge. Use suffix BL when ordering. Other styles are also available. Use suffixes shown below when ordering. U: unslotted (lengths from " to ") TU: thin unslotted LH: large 9/6" diameter head (lengths from /4" to ") TPS: thin posts and screws for 7/3" hole with " diameter head (lengths from " to 7/8") 6 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

7 Threaded Posts & Screws CONTINUED RATCHET ASSEMBLY Ratchet assembly posts and screws feature screws with serrated pins, which allow for a variable and more secure assembly. Simply press together for fast connection. Parts ratchet together to automatically secure flat panels, punched papers, fabric swatches, key cases, calendars, etc. Because they re made of polypropylene, they are useful for corrosive environments. These are not for applications which require a reuseable fastener. Please see previous page for reuseable applications. RPS 50 BL RPS 50 WH RPS 375 BL RPS 375 WH RPS 500 BL RPS 500 WH RPS 750 BL RPS 750 WH Length /4 /4 / / Minimum order 000. Standard colour: Black or white. Also available in other colours (colour matching is possible). Stack-Loks TM Stack-loks can be used to fasten and control computer sheets, catalogues, samples and many other objects. Use Slip-lock style for quick and easy assembly or Slide-lock for a more secure locking fastener. They come in either -5/6" or 4" in lengths and are available in natural nylon and white or black polypropylene. Minimum order 000. Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 63

8 Screw Covers CAP AND BASE SETS Made of UV-stabilized polypropylene, screw covers can be used in most environments to protect and enhance screw, nail and rivet heads. Give a handsome finishing touch to furniture, boats, clean rooms, office appliances, etc. They may also act as bumpers, glides or feet and reduce electrical hazards. With glass, ceramics or other easily-chipped surfaces, these provide excellent protection from metal fasteners. Use them with pan, round, fillister or binding head fasteners. Note: A special base for use with flat or oval head screws is available at no extra charge. Screw Size Cover Diameter Installed Height CO 4-6 CO 8-0 CO 5 4 or 6 8 or 0 / Minimum order 000. Stock colours*: Glossy white or black, matte white, black or brown. Please specify matte or glossy and colour when ordering. Also available in many other colours (colour matching is possible). * Base colour is natural. HINGED SCREW COVERS Screw Size Cover Diameter Installed Height HCO 4-6 HCO 8-0 HCO 5 4 or 6 Pan 8 or 0 Pan /4-0 Pan 9/64 35/64 45/64 3/6 3/64 /4 Minimum order 000. Stock colours: Black, white, red, yellow, orange, blue, green and brown. Matte finish only. 64 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

9 SCREWDOMES Screw Covers CONTINUED Just press these covers onto #8 or #0 pan head screws to get a professional, finished look. Made from low density polyethylene. Available in black, white, red, yellow, orange, blue, green and brown. Colour matching can be done where quantities permit. Please request information on part numbers PDC 8 or PDC 0 together with the colour you are looking for. HEX DOME CAPS No special tools required. Just press onto nut or screw head. Moulded in low density polyethylene. Available in black or white. HDC 0 HDC 50 HDC 3 HDC 375 HDC 500 Minimum order 000. Hex Nut or Screw Size #0 /4 5/6 / Need some screws to go with these covers? Turn to pages Acrylic Cubes and Hemispheres What more description is needed? Just give us your specs and we ll take it from there. Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 65

10 Plastic Turntables UNLAZY SUSANS (well, they are hardworking...) Our polystyrene turntables are attractive and colourful the quietest free-running turntables available. The turntable is your base. Easily cemented directly to plastic or wood displays, it eliminates sub- or full-base. Pcs./Case Top Dia. XT 44 XT 45 XT 65 XT /4 4-/4 5-/ 5-/ Base 4-/4 dia. 5- square 5- square 5-/ dia. Total Thickness 9/6 9/6 9/6 9/6 XT 69B XT 74 XT 99 XT / 4-/ dia. 7-/4 dia. sloped 9 dia. dia. sloped Sold in case lots only. Minimum order 00 pieces. Standard colours: Black, clear. Special order: Gray, brown, white, ivory. Sizes may not be combined. 9/6 9/6 Nesting Containers These polystyrene nesting containers are ideal for sorting and storing small parts. They are useful in industrial applications and a variety of home and office projects. Their tapered design allows containers to be easily stacked for compact storage. Dimensions are 6 " x 6 " x 3" deep. Available in natural, black or fluorescent pink. Content of containers not included. 66 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

11 Suction Cups Description Diameter CUP 75 CUP 50 CUP 00 CUP 50 Plain - -/ CUP 75H CUP 50H CUP 00H CUP 50H Metal Hook - -/ Plain Metal Hook Thumb Tack CUP 50T CUP 50T Minimum order 00. Plastic Thumb Tack Head - -/ Proper method for applying and removing suction cup. Clean the suction cup and the surface it is to be used on. DO NOT USE A CLEANER CONTAINING SILICONE!. Apply by curling back the edges of the suction cup and pressing in on the centre as you are releasing the edges. 3. To remove suction cup simply pull up on the release tab. All suction cups are crystal clear and feature Release Tab for easy removal. Browse our index to get an idea of the range of products we carry. And see our line card on page 8. Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 67

12 Plastic Packaging Handles Soft Poly These white polyethylene handles are stocked in sizes of 6" to 9". Different styles available, suited to T-mounting, slot-mounting, or for hooking onto string-wrapped goods. C-Line, Standard, Heavy Duty Carry Handle Description Carton HAN 6SP HAN 6STD HAN 7STD HAN 7HD HAN 9C HAN C 6" Soft Poly 6" Standard 7" Standard 7" Heavy Duty 9" C-Line Carry Handle 3,000,500,800,500,000 3,000 Sold in carton quantities only. Other colours and sizes available. Wall Mount Adapters WMA 9433 is manufactured of clear acrylic and are solvent bondable to acrylic. Turn your stand-up display into a hanging one in one quick and neat step. No fuss, no problem. 68 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

13 Hinged Clear Styrene Boxes UNDIVIDED Inside Dimensions Width Length Depth Carton Qty. B 700 B 70 B 800 B 80 B 87-5/6-5/6 5-/4 5-/ 7 4-7/6-3/6 3-/ -/4 / -5/ B 85 B 85* B 95* Minimum order carton. Sold only in carton quantities. Other sizes available. Send us your specs. * Two-tone - clear cover with black base 4-/ -7/8 3-/ - -9/6 9/ DIVIDED Inside Dimensions Width Length Depth No. of Sections Carton Qty. B 85 B 86 B 87 B 4878 B Kit 7 4-/ 4-/ 4 0-/ 3-/ /4 Minimum order carton. Sold only in carton quantities. Other sizes available. Send us your specs. -5/6 -/4 -/ Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 69

14 Knobs Choose from ball, tapered, tear drop, instrument, star-shaped (3, 4 or 5-point), to name just a few. You can specify smooth, knurled or fluted edges. Almost all knobs are available with either a threaded female insert or a threaded male stud. (Some styles are also offered with threaded plastic or cored hole, or are available with a set screw.) All knobs are available in a variety of sizes. The standard colour is black and the standard materials are phenolic and nylon. Fax or send us a drawing of the type of knob you want, including all the pertinent information about dimensions, materials, quantity required, etc. Delrin Thumb Screw Knobs As easy as --3. Pick a head style (knurled, rosette or tee); add a standard socket head cap screw, choose your method of cold-pressing them together. Say the magic words and presto! - you ve got an instant thumb screw knob. Head Style Fits Screw # A B C TK TK TK 3 TK 4 TK 5 TK 6 TK 7 Knurled Knurled Knurled Knurled Knurled Knurled Knurled /4 /4 5/6 5/6 / /64 3/6 7/3 /4 5/6 5/6 3/3 9/3 /64 7/64 / / 9/3 TK 8 TK 9 TK 0 Rosette Rosette Rosette /4 5/6 -/ -/ -/ 5/3 3/3 5/3 7/3 37/64 45/64 TK TK TK 3 TK 4 Tee Tee Tee Tee 0 /4 5/6 -/4 -/ - Minimum order 00. Stock colour: Black. Also available in red, gray and yellow. Metric sizes available. /4 5/6 3/3 5/3 7/6 33/64 3/3 70 Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

15 Swiftach Systems These versatile fastening devices can save you time, labour and money. If your application involves tag attaching, product assembly, sewing operations, packaging or display units, Swiftach may have your solution. Here are just some of the uses for Swiftaches : tag hanging goods, tag and pair items simultaneously, hold inventory control tags in place, product assembly, ID for fish and livestock. A wide range of sizes and shapes (T-END, loop, hook and button end) are available. Please call for minimums. The Swiftachments shown below have 50 paddle fasteners per clip. SWIFTACHMENTS Length Tensile Strength (lbs.) Fine Fabric D D / - 5 General Purpose D D 0994 D 0895* Heavy Duty D D D D 0896 / 3 5 Minimum order box. Sold only in boxes of *General purpose 3" also available in colours. 7-9 HAND TOOLS AND REPLACEMENT NEEDLES Mark II Hand Tools D D 065 (Mark III ) D D Description Standard Scissor-Grip Pistol-Grip Fine Fabric Scissor-Grip Fine Fabric Pistol-Grip Mark II Scissor-Grip (Fine Fabric) Mark II Pistol-Grip (General purpose and heavy duty) Mark II Needles Description D 0894 D D 0893 Needles are packaged 4 per kit. Standard Fine Fabric Heavy Duty Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com 7

16 STOP STOP STOP STOP STOP STOP Cords Canada Ltd., 6 Densley Avenue, Toronto, ON M6M 5E Toronto/GTA: North America toll free: Fax: cords@cordscanada.com

Single Prong for Single-Hole Cards

Single Prong for Single-Hole Cards DISPLAY PRODUCTS HOOKS PEGBOARD HOOKS For /8 or /4 perforated board ( spacing). These white polypropylene hooks are safe and lightweight. They won t cut skin like metal hooks can, and they do not rust

More information

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty. Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic

More information

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.

Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life. Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional

More information

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20 Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal

More information

GAGING AND INSPECTION

GAGING AND INSPECTION Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp

More information

Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help

More information

200 Lunar Marble 201 Light Oak 202 Walnut 203 Ocean Marble 204 Forest Marble 205 Cherry

200 Lunar Marble 201 Light Oak 202 Walnut 203 Ocean Marble 204 Forest Marble 205 Cherry 2 Decorative Screw Covers Pop-On Screw Covers (POSC) POSC s provide an attractive solution for concealing fastening or mounting hardware. Used as a set with our Pop-On Screw Base, POSC s can be used with

More information

Cable Ties and Accessories

Cable Ties and Accessories 3M Cable Ties are designed to secure wire bundles and harness components quickly, without slipping. Featuring a self-locking head and a locking mechanism, they are designed to handle temperatures up to

More information

WOLF LOOM DOUBLE BACK BEAM

WOLF LOOM DOUBLE BACK BEAM WOLF LOOM DOUBLE BACK BEAM Assembly Instructions Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 p. 303.442.3212 f. 303.447.9273 2017 Schacht Spindle Company,

More information

Delrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14

Delrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14 Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest

More information

WESTERN WIRE PRODUCTS

WESTERN WIRE PRODUCTS WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing

More information

P.O. Box 8400 Green Bay, WI (920)

P.O. Box 8400 Green Bay, WI (920) P.O. Box 8400 Green Bay, WI 54308-8400 (920) 468-2165 Change Notice No. 112 Implemented By: KI-Pembroke Notification By: Scott Vissers Date: 03/15/10 Component Product Title: Series XXI Lateral Filing

More information

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model: , 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.

More information

GRAND PIANO HARDWARE AND ACCESSORIES

GRAND PIANO HARDWARE AND ACCESSORIES GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -

More information

POP PLUS / SPIDER SET-UP INSTRUCTIONS

POP PLUS / SPIDER SET-UP INSTRUCTIONS POP PLUS / SPIDER SET-UP INSTRUCTIONS 1 Place system frame on floor with screws indicating top. Expand upwards & outwards and secure frame connectors. Pop-Up display systems are made to be set-up and taken

More information

Be sure any accessory used will fit with the soft upper doors before installing. Not all accessories will be compatible.

Be sure any accessory used will fit with the soft upper doors before installing. Not all accessories will be compatible. Company Name: Spike Power Sports Vehicle Name: Polaris General 2P Product Description: Soft Upper Doors Part Number: 58-1600 Revision: R01 09/19/2018 Contents: 655 Elm Ridge Ave, Canal Fulton OH, 44614

More information

Serial Number Location

Serial Number Location GL/GLX STRENGTH TRAINING SYSTEM OWNERS MANUAL Serial Number Location SERIAL 3 4 5 7 8 Record your Serial number and purchase date here: S/N DATE: DEALER: Model No. BCG-GL BODYCRAFT is a division of Recreation

More information

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers

More information

GRID CEILING HOOKS FISH CLIP. REGULAR HOOK 2mm galvanized wire with 16mm opening. Ideal for ONE-UP applications. Galvanized wire hook.

GRID CEILING HOOKS FISH CLIP. REGULAR HOOK 2mm galvanized wire with 16mm opening. Ideal for ONE-UP applications. Galvanized wire hook. GRID EILING HOOKS SREW-ON EILING TRAK Ideal for plasterboard ceilings or other non-grid areas. Shift sign placement left or right with ease, install parallel tracks for a 3D layered effect, eg in display

More information

PLASTIC FABRICATION COMPONENTS

PLASTIC FABRICATION COMPONENTS A PLASTIC FABRICATION COMPONENTS ACRYLIC HINGES.................................... LIVING HINGES...................................... 3 HANDLES & KNOBS.................................. 4 HANGING ATTACHMENTS.............................

More information

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:

More information

METRIC FA S T E N E R S

METRIC FA S T E N E R S METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8

More information

Introduction. Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions

Introduction. Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Swing Away Carrier Kit. We pride ourselves in the products we develop

More information

HEAVY DUTY GASKET CUTTER

HEAVY DUTY GASKET CUTTER HEAVY DUTY GASKET CUTTER GUIDE TO PERFECT GASKETS CUTTING GASKETS 1 TO 13 IN DIAMETER: 1. Lay out gasket outer diameter (OD), inner diameter (ID) and bolt holes on template or gasket material. See section

More information

Hip Roof Canopy Instructions

Hip Roof Canopy Instructions Hip Roof Canopy Instructions - PUT SAFETY FIRST. NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS MANUAL MAY RESULT IN PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.. Before attempting

More information

PORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS

PORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS PORTA~TRACE GAGNE, INC. 41 Commercial Dr. Johnson City, New York 13790 Phone: 1-607-729-3366 Fax: 1-607-729-7644 ASSEMBLY INSTRUCTIONS PORTA~TRACE MODEL 2436T LIGHT TABLE PORTA~TRACE MODEL 3648T LIGHT

More information

15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B

15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body

More information

OSBORNE BUTTON MACHINES. No. 1 HAND BUTTON COVERING MACHINE Osborne No. W-1. No. 2 HAND BUTTON COVERING MACHINE

OSBORNE BUTTON MACHINES. No. 1 HAND BUTTON COVERING MACHINE Osborne No. W-1. No. 2 HAND BUTTON COVERING MACHINE BUTTON MACHINES # 16 3/8 Dia. # 18 7/16 Dia. # 20 1/2 Dia. # 22 9/16 Dia. # 30 3/4 Dia. # 36 7/8 Dia. # 40 1 Dia. # 45 1-1/8 Dia. What is Required to Cover Buttons? 1.- A Button Covering Hand Press Machine.

More information

Hot Melt Adhesives Jet-melt & Hot Melt Spray. Distributed By:

Hot Melt Adhesives Jet-melt & Hot Melt Spray. Distributed By: Hot Melt Adhesives Jet-melt & Hot Melt Spray Distributed By: www.wilcox-slidders.com 3M Scotch-Weld Hot Melt Adhesives and Applicators The 3M systems approach to help you improve productivity and lower

More information

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written

More information

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...

More information

Tools Sec. 23 2FW. 2018

Tools Sec. 23 2FW. 2018 Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces

More information

Parts Catalog. S-Series Slicer Smart Manual SG13. Model:

Parts Catalog. S-Series Slicer Smart Manual SG13. Model: , 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE

More information

Product #: Product #:

Product #: Product #: STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws

More information

onlinecomponents.com 150

onlinecomponents.com 150 150 900-147/900-148/900-149 Fish Tape 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe

More information

Interactive Monitor Arm

Interactive Monitor Arm Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods

More information

Premium Light Filtering Sheer Shade

Premium Light Filtering Sheer Shade Premium Light Filtering Sheer Shade Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing a Premium Light Filtering

More information

The Phoenix. Professional Quilting Frame. Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.

The Phoenix. Professional Quilting Frame. Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2. The Phoenix Professional Quilting Frame Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.1 1 The Phoenix Professional Quilting Frame Parts List Box 1...3 Box

More information

tile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE:

tile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: redi DOOR INSTALLATION INSTRUCTIONS tile redi Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: 1100 Door-Door Framed sliding doors RDQCI5023

More information

Metal Bending Tools, Scribes & Awls

Metal Bending Tools, Scribes & Awls Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127

More information

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )

The Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 ) P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your

More information

Pleated Shades with Corded Top Down / Bottom Up Option

Pleated Shades with Corded Top Down / Bottom Up Option Pleated Shades with Corded Top Down / Bottom Up Option Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing Pleated

More information

Features of TOOLFAST Clamping Devices and Clamping Elements

Features of TOOLFAST Clamping Devices and Clamping Elements PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:

More information

PRO Brake System. P R O 1 9 a n d P R O 1 4 B r a k e s

PRO Brake System. P R O 1 9 a n d P R O 1 4 B r a k e s P R O 1 9 a n d P R O 1 4 B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality cuts in coil stock, sheet metal, and vinyl siding

More information

UPPER DOOR KIT P/N

UPPER DOOR KIT P/N UPPER DOOR KIT P/N 2879946 Application RZR XP4 1000 Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these installation instructions

More information

Hiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA

Hiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:

More information

jarswe are all familiar with the concept of recycling

jarswe are all familiar with the concept of recycling Gifts in jarswe are all familiar with the concept of recycling glass bottles and jars but for thrifty crafters there is also the possibility of upcycling turning plain unwanted items into something beautiful

More information

BABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms

BABY WOLF LOOM. Assembly Instructions for Knocked-Down Looms BABY WOLF LOOM Assembly Instructions for Knocked-Down Looms BEFORE YOU BEGIN Please read through the directions before beginning to assemble your loom. Unpack the loom parts carefully. Do not throw away

More information

UNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench

UNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

Tel / (USA & CANADA) /

Tel / (USA & CANADA) / Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to

More information

Technicians of Terror. This is the air valve we make to use with our air

Technicians of Terror.  This is the air valve we make to use with our air These are pictures of our scissor prop. Technicians of Terror http://www.halloweenfear.com/scissorprop.html props. This is the air valve we make to use with our air This pictures the duel door closer cylinders

More information

Installation Instructions Kit, Base Rail Bracket Part # 31413

Installation Instructions Kit, Base Rail Bracket Part # 31413 Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and

More information

Installation Instructions For Slider Casement Air Conditioners

Installation Instructions For Slider Casement Air Conditioners Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT

More information

installation instructions For Slider Casement Air Conditioners

installation instructions For Slider Casement Air Conditioners installation instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT

More information

Section J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10

Section J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10 Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.

More information

Linear Hook- on Worksurfaces

Linear Hook- on Worksurfaces Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep

More information

DOOR STOPS & BUMPERS See page 321 for finish descriptions.

DOOR STOPS & BUMPERS See page 321 for finish descriptions. CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger

More information

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2

More information

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14. Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00

More information

ASSEMBLY AND INSTALLATION INSTRUCTIONS

ASSEMBLY AND INSTALLATION INSTRUCTIONS ASSEMBLY AND INSTALLATION INSTRUCTIONS Model 1425 Aluminum Swivel Rack IMPORTANT BEFORE YOU BEGIN Read these instructions and warnings completely before installation. CAPACITY 200 lbs. MAXIMUM NOTE: This

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED

More information

Fast, Flexible, Functional

Fast, Flexible, Functional FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard

More information

USSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS

USSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS 1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:

More information

Installation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:

Installation Manual. Solid Plastic Toilet Partitions.   IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.: Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free

More information

LAN Locker Adjustable Shelves

LAN Locker Adjustable Shelves Adjustable Shelves LAN LOCKER ADJUSTABLE SHELVES * Adjustable Shelves are available for LAN LOCKER widths: 24, 30, 48, 60, and 72. * When installing more than one Adjustable Shelf, it is recommended that

More information

CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT Phone: Toll-free:

CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT Phone: Toll-free: CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free: 800-700-5919 Email: info@csunitec.com CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free:

More information

Allen & Allen Company

Allen & Allen Company Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since

More information

LOCKN LOAD FIRST TIME INSTALLATION

LOCKN LOAD FIRST TIME INSTALLATION LOCKN LOAD TM TRACK MOUNTING KIT ISUZU MU-X 2013+ LS-M & LS-U MODELS ONLY 3 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES

More information

tile redi redi DOOR Redi Swing SERIES: CONFIGURATION: MOUNTING PACKAGE:

tile redi redi DOOR Redi Swing SERIES: CONFIGURATION: MOUNTING PACKAGE: redi DOOR INSTALLATION INSTRUCTIONS tile redi Redi Swing g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: 2900V Door-Panel No header, offset pivot hinges, u-channel

More information

Tools Sec. 23 $SU. 201

Tools Sec. 23 $SU. 201 Tools Sec. 23. 201 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning 6

More information

3 Scotchmate TM. Polyester Reclosable Fasteners. Product Selection Guide April, M Scotchmate Polyester Reclosable Fastener.

3 Scotchmate TM. Polyester Reclosable Fasteners. Product Selection Guide April, M Scotchmate Polyester Reclosable Fastener. 3 Product Selection Guide April, 2003 Products 3M Scotchmate Polyester Reclosable Fastener Plainbacked Products Loop Hook SJ3477 SJ3476 SJ3487FR SJ3486FR Pressure Sensitive Adhesive Products Loop Hook

More information

LANTERNS. Good & Evil. Give your room the warm enchanted glow of delicate paper lanterns. Tabletop Lanterns. Hanging Lanterns. Have an adult help you.

LANTERNS. Good & Evil. Give your room the warm enchanted glow of delicate paper lanterns. Tabletop Lanterns. Hanging Lanterns. Have an adult help you. Good & Evil LANTERNS Give your room the warm enchanted glow of delicate paper lanterns. USE LED LIGHTS ONLY. DO NOT USE REAL CANDLES. Tabletop Lanterns Have an adult help you. Step 1: Print out (2) of

More information

FITTINGS, SCREWS, BOLTS, ETC.

FITTINGS, SCREWS, BOLTS, ETC. 5mm Connecting 3 Mending Plate Order number... 19-116 For 5/8 to 5/8...19-168 For 3/4 to 3/4...19-170 Packaged 5 pieces Finish: Bright Nickel Packaged 5 pieces Finish: Zinc Plated Connecting Bracket For

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

SCHACHT STANDARD FLOOR LOOMTM

SCHACHT STANDARD FLOOR LOOMTM SCHACHT STANDARD FLOOR LOOMTM FL3109 FL3111 FL3113 FL3115 FL3121 FL3123 FL3125 FL3127 FL3310 FL3312 FL3314 FL3316 FL3322 FL3324 FL3326 FL3328 Assembly instructions LOW CASTLE LOOM IN MAPLE Find out more

More information

Tools Sec. 23 Jun. 2018

Tools Sec. 23 Jun. 2018 Tools Sec. 23 Jun. 2018 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning

More information

Instruction Manual. Banner Grip -banner stretching frame. Manual Version Sept27, Any size made: by Graphic size, OD Size, Live Area -1 or 1,000!

Instruction Manual. Banner Grip -banner stretching frame. Manual Version Sept27, Any size made: by Graphic size, OD Size, Live Area -1 or 1,000! Instruction Manual Banner Grip -banner stretching frame Above: Open frame to reveal clamps pulling banner tight. Above: Closed frame to conceal all mounting hardware, NICE! Manual Version Sept27, 2012

More information

ASSEMBLY & INSTALLATION INSTRUCTIONS

ASSEMBLY & INSTALLATION INSTRUCTIONS ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 118 AND VEHICLE CENTER MEMBER 6050 TO FIT 2008 & LATER FORD F250-F550 4X4 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International,

More information

======================================================================================== ( DR / DR) JK WRANGLER MOD RACK

======================================================================================== ( DR / DR) JK WRANGLER MOD RACK (10984 4DR / 10982 2DR) JK WRANGLER MOD RACK INSTALLATION SHEET Important Notes: Some brands of windshield light brackets and snorkels may not be compatible with the 10984 MOD Rack System. Body lifts are

More information

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted

More information

Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits

Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits SCREWDRIVER SETS SET NO. 88819 19 PC. COMBINATION SCREWDRIVER SET 88203 Cabinet Tip 3" 88204 Cabinet Tip 4" 88208 Cabinet Tip 8" 88214 Cabinet Tip

More information

Seamers, Folding Tools & Brake

Seamers, Folding Tools & Brake Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws

More information

FIXED PANEL SLIDER QCI5241

FIXED PANEL SLIDER QCI5241 INSTALLATION INSTRUCTIONS FIXED PANEL SLIDER QCI5241 FRAMELESS PANEL / DOOR / PANEL FRAMELESS DOOR / PANEL QCI5241 REV. 0 Page 1 Certified 06/16/2016 Parts List *Quantities may vary QCI5241 REV. 0 Page

More information

35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate

35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate 35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing

More information

Frameless Fixed Panel Slider

Frameless Fixed Panel Slider INSTALLATION INSTRUCTIONS Frameless Fixed Panel Slider QCI-5279 SINGLE ROLLER WITH ANTI-JUMP DOUBLE ROLLERS QCI5279 Rev Page Certified 08/09/6 Tools: To install your New Shower Enclosure, you may need

More information

Frameless Inline Door With Return QCI5263

Frameless Inline Door With Return QCI5263 INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges

More information

SCREWDRIVERS AND NUT DRIVERS

SCREWDRIVERS AND NUT DRIVERS SCREWDRIVERS AND NUT DRIVERS No toolbox would be complete without an assortment of screwdrivers. Stanley Proto has a complete line of professional screwdrivers in enough shapes, sizes, and tips to turn

More information

LOCKN LOAD FIRST TIME INSTALLATION

LOCKN LOAD FIRST TIME INSTALLATION LOCKN LOAD TM TRACK MOUNTING KIT MITSUBISHI TRITON MQ DUAL CAB 2015+ 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES + CARGO

More information

WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit

WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit REVISION 04 November, 20 2018 Ranger XP Door Kit Prior to installation, please verify if a revised version of this instruction sheet is available on Knowledge Center. The following symbols may be used

More information

Brochure Display Systems. Taymar #1200 Series Wire Stands #3000 Series Wallscape

Brochure Display Systems. Taymar #1200 Series Wire Stands #3000 Series Wallscape G Brochure Display Systems Taymar #1200 Series Wire Stands #3000 Series Wallscape Brochure Display Systems PAGE NO# G1.................. TAYMAR Brochure Holders G2.................. TAYMAR Brochure Holders

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

Equilibrium. Conference Table. Installation Instruction. Revision B 11/07/16

Equilibrium. Conference Table. Installation Instruction. Revision B 11/07/16 Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete

More information

Installation, Operation and Care Instructions. Continuous Cord Loop Operating System

Installation, Operation and Care Instructions. Continuous Cord Loop Operating System Installation, Operation and Care Instructions Continuous Cord Loop Operating System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3

More information

BITS, NUTSETTERS, ADAPTERS

BITS, NUTSETTERS, ADAPTERS BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power

More information

Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions

Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented

More information

Panels, Panel Mounting & Other Accessories

Panels, Panel Mounting & Other Accessories Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock

More information

HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE

HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6

More information