CATALOG NO. 58 L STYLES

Transcription

1 SECOND EDITION Finest Quality ~ ~~... ~~ INDUSTRIAL SEWING EQUIPMENT CATALOG NO. 58 L STYLES 1900 K 2600 A 1200 A 2600 D 1700 A 5600 C 2300A 5800 C LIST OF PARTS AND INSTRUCTIONS

2

3 Catalog No. 58 L LIST OF PARTS STYLES IN CLASSES and Style 1900 K First Edition Copyright 1927 By Union Special Corporation Rights Reserved in All Countries UNION SPECIAL CORPORATION INDUSTRIAL SEWING MACHINES CHICAGO July, 1976 Printed in U.S.A. 1

4 APPLICATION OF CATALOG This catalog applies only to the standard styles of machines listed below, but can be applied with discretion to the special machines in Classes 1200, 1700, 1900, 2300, 2600, 5600 and Information relative to transmitters is contained in Catalog No. 29. Needles are listed and fully described in Catalog No. 45. These catalogs will be furnished gratis on request A 1200 c 1200 G Q 1200 AA-%-inch Finished Width 1200 AA-%-inch Finished Width 1200 AC-%;-inch Hem 1200 AD 1700A 1700B 1700 F 1700 G 1700 H 1900 K 2300 A 2300 B 2300M 2300N 2300 p 2300Q 2300 R 2600A 2600D 2600 F 2600 G 2600H 2600 J 5600 C-%-inch Binding 5600 C-% -inch Binding 5800 C-31-inch Finished Width 5800 C-%-inch Finished Width 5800 C-%;-inch Finished Width 5800 H-31-inch Finished Width 5800 H-%-inch Finished Width 5800 H-%-inch Finished Width 5800 J -31-inch Finished Width IDENTIFICATION OF MACHINES A machine equipped with specified parts and,fitted for a specific operation is given a STYLE NUMBER, the symbol for which is a number evenly divisible by 100, with one or more letters suffixed. Example: 1200 A. Style numbers are classified as STANDARD and SPECIAL. Style numbers of standard machines do not include the letter "Z," while those including the letter "Z" are special. (See description of Style 1200 Z.) When only minor changes are made a "Z" is merely suffixed to the respective standard style number. Example: 1200 AZ. Styles of machines similar in construction are grouped and given a CLASS NUMBER, the symbol for which is a number evenly divisible by 100, without a letter or letters suffixed. Example:

5 STYLES OF MACHINES IN CLASS 1200 Flat Bed One Needle Machines, 5}2-inch Space to Right of Needle, Bed 10 Inches Long, Double Locked Stitch, for Knitted Goods 1200 A For finishing knitted underwear and similar garments; feed surface on all four sides of needle, Type 121 needle C Equipped with split front presser foot No. 65 A, otherwise same as Style 1200 A G For finishing knitted undershirts; feed surface at left and rear of needle, Type 121 needle _ For finishing knitted drawers; feed surface at left and rear of needle, Type 121 needle Q For jersey seaming; Type 121 needle AA For attaching collarettes to knitted undergarments; strip used in long lengths, differential feed, Type 121 needle AC For hemming bottoms of step-ins, chemises, union suit flaps and similar garments, Type 101 needle AD For dividing a hem to permit the subsequent insertion of an elastic band, thus producing the elastic heading on bloomers and similar garments, Type 101 needle Z A special style similar to the standard styles in Class 1200, having several of the standard parts substituted by corresponding parts or equipped with additional parts. STYLES OF MACHINES IN CLASS 1700 Flat Bed One Needle Machines, 5}2-inch Space to Right of Needle, Bed 10 Inches Long for Glove Work 1700 A For pointing gloves, light weight work; Type 121 needle B For pointing gloves, medium and heavy weight work; Type 121 needle F ---For closing canton flannel gloves; DOUBLE LOCKED STITCH, Type 102 needle G For closing light weight fabric gloves ~ade from silk, chamoisette and similar fabrics, DOUBLE LOCKED STITCH, Type 101 needle H For closing cotton jersey gloves; DOUBLE LOCKED STITCH; Type 101 needle Z A special style similar to the standard styles in Class 1700, having several of the standard parts substituted by corresponding parts or equipped with additional parts. 3

6 STYLES OF MACHINES IN CLASS 1900 Flat Bed One Needle Machines, 572-inch Space to Right of Needle, Bed 10 Inches Long 1900 K For basting clothing, skirts, ladies' suits, dresses and similar garments; chain stitch, maximum length of stitch 72 inch, gauge attached to cloth plate, Type 140 needle Z A special style similar to the standard styles in Class 1900, having several of the standard parts substituted by corresponding parts or equipped with additional parts. STYLES OF MACHINES IN CLASS 2300 Flat Bed One Needle Machines, Bed 10 Inches Long, Double Locked Stitch, Dewees Trimmer, Type 121 Needle 2300 A For seaming knitted underwear; minimum width of seam %J inch B For seaming knitted underwear; minimum width of seam Ys inch M For seaming sweaters and other heavy weight materials; minimum width of seam Ys inch N For closing toes of stockings; minimum. width of seam %J inch P For seaming knitted underwear; tandem differential feed, minimum width of seam %J inch Q For seaming knitted underwear; tandem differential feed, minimum width of seam Ys inch R For seaming sweaters and other heavy weight materials; tandem differential feed, minimum width of seam Ys inch Z A special style similar to the standard styles in Class 2300, having several ef the standard parts substituted by corresponding parts or equipped with additional parts. STYLES OF MACHINES IN CLASS 2600 Flat Bed One Needle Machines, Bed 10 Inches Long, Double Locked Stitch, for Shoe and Leather Work 2600 A For closing shoes; plain seam, upper and under feed, Type 501 needle D For closing leather shoes; welt seam, using pre-folded welt, upper and under feed, Type 501 needle F For closing shoes, plain seam, under feed only, flat presser foot, Type 501 needle G For closing shoes; plain seam, under feed only, rolling presser foot, diameter of roller 1%; inches, Type 501 needle. 4

7 STYLES OF MACHINES IN CLASS 2600 (Cont'd) 2600 H For French binding operations on oxfords, pumps, slippers, sandals and other irregular shaped articles; under feed only, Type 501 needle J For "Gimp" or ornamental stitching on pumps, oxfords and similar articles; rolling presser foot, diameter of roller I;!f6 inch, Type 121 needle Z A special style similar to the standard styles in Class 2600, having several of the standard parts substituted by corresponding parts or equipped with additional parts. STYbES OF-MACHINES IN-eLASS Flat Bed One Needle Machines, Bed 10 Inches Long, Tandem Differential Feed, Double Locked Stitch, Type 121 Needle 5600 C For binding necks and fronts of knitted undershirts Z A special style similar to the standard styles in Class 5600, having several of the standard parts substituted by corresponding parts or equipped with additional parts. STYLES OF MACHINES IN CLASS 5800 Flat Bed One Needle Machines, Bed 10 Inches Long, Upper and Under Feed, Double Locked Stitch, Type 121 Needle for Miscellaneous Work 5800 C For attaching collarettes to knitted undergarments; long length cut edge strip H For attaching extension button stays to knitted undergarments; long length cut edge strip J For attaching split tube border to bottoms of step-ins, chemises and similar garments; long length cut edge strip Z A special style siinilar to the standard styles in Class 5800, having several of the standard parts substituted by corresponding parts or equipped with additional parts. NEEDLES TYPE NUMBER Each needle has a type number and size number. DESCRIPTIONS The former denotes the kind of point, shank, length, groove, finish and other details. The latter denotes the largest diameter of the blade measured in thousandths of an inch, midway between the shank and eye and is stamped on the needle shank. Collectively, the Type Number and Size Number represent the complete definition of the needle. The Type Numbers of the needles used in the styles of machines covered by this catalog are listed on the following page. Set opposite each Type Number is the definition of the needles. 5

8 Typ~ No. NEEDLES (Cont'd) Description 101 Round shank, round point, extra short, double groove, nickel plated. 102 Round shank, round point, extra short, double groove, short blade, nickel plated. 121 Round shank, round point, short, double groove, nickel plated. 140 Round shank, round point, long, double groove, nickel plated. 301 Round shank, stay point, extra shor~, double groove. 501 Round shank, rocked point, extra short, double groove. 701-Round-shank,.flat.point,.. extra-short,_double... groove Round shank, twist centered point, extra short, double groove. NOTE: For other types of needles refer to Catalog No. 45. APPLICATION OF The styles of machines covered by this cata- TYPE NUMBERS log are listed herewith. Set opposite each Style Number is the Type Number of the needle generally used. Machine ~No. of Machine ~No. of Style Number eedle Used Style Number le Used 1200 A p c Q G R A 101, 301, 501, 1200 Q , AA D 101, 301, 501, 1200 AC , AD F 101, 301, 501, 1700A , B G 101, 301, F , G H 101, 301, 501, 1700H , K J 101, A C B C M H N J 121 USE GENUINE NEEDLES Success in the operation of these machines can be secured only by the use of genuine Union Special Needles, as furnished by the Union Special Machine Company, or its subsidiaries. Obviously, it is to our interest to maintain the reputation of the machines by furnishing the very best needles obtainable. They are designed according to the most approved scientific principles and are made with the utmost precision. The maximum efficiency and durability are assured. Genuine needles are put up in packages marked at the top "Trade 'UNION SPECIAL' mark." All other needles are bogus. 6

9 ORDERING To have orders promptly and accurately filled, the empty package, a sample needle, or the Type and Size Numbers should be given. See marks on package. An intelligible order would read as follows: 100 Needles Type 121 Size.040. ORDERING REPAIR PARTS PLATES Illustrations of parts similar in appearance and size are shown in groups. LIST OF PARTS Turning from the plates to the list of parts, the definition of each part and its principal uses will be found. Always check the symbol against its definition before ordering. It is not necessary to furnish the plate number. When a. part is used or can be used in all machines covered by this catalog, no specific use is mentioned in the definition. For convenience in ordering, minor parts, such as screws, nuts and similar articles are repeated after each major part. (-) A dash in the "plate number" column of the list of parts indicates the absence of an illustration. (0) A square in the "Symbol to order by" column indicates that the part is commercial and can be readily purchased in any machinists' supply house. W A double dagger in the "Symbol to order by" column indicates that the component parts cannot be furnished separately. IDENTIFYING PARTS Where the construction permits, each part is stamped with its part number. Some of the smaller parts are stamped with an identification letter to distinguish them from parts similar in appearance. All part numbers represent the same part regardless of the catalog in which they appear. SUPPLIES All supplies, including taps, reamers, belting, belt hooks, belt fasteners, screw drivers and powdered oil stone will be promptly furnished. TERMS Prices are strictly net cash and subject to change without notice. Express and freight shipments are forwarded at the buyer's risk F.O.B. shipping point. Parcel post shipments are insured unless otherwise directed. A charge is made to cover the postage and insurance. 7

10 Plate 1-Full Size

11 Plate 2-Full Size 2324 R

12 Plate 3-Full Size

13 Plate 4-Full Size lid

14 Plate 5-Full Size

15 Plate 6-Full Size

16 Plate 7-Full Size liiuii

17 Plate 8-Full Size OF ROLLER

18 Plate 9-Full Size iii II ~ e ~ ~ I ~ mdj H;l:l tijjii ~ tl' I;@ t.iai#tj t4" i tl4f;@ lliid I I I I ~._,,.,. ~... w, fi -ft;j:ifj Bml " " v ' ~ y., ' 9 y v I ~ m!s me lltll!l mid lmb1 " IBiJ t.p.+i:e lid ' I UD f#r..ili:!l tet;i!j llmei DB GI!D &flil t*.hi:l m 9 I WITIIII fbijl #!.1~1.1.. t.p' 8.. fb!d - ' mij.i.~!! T rl-4:11:1.. ''- T '' I F-24

19 I I f rt4-1n 1111 am Plate 10-Full Size v v.... l~il=j J GliB mb ' --~--~ OlD ' I i&) '.1'4t+ltl ~""""" ;~~;;;;,~~~{ ~" lu.._,..,.,., ""-~ 20\C I.

20 Plate 11-Full Size MEII ~~~~ IQ1Ji UI.JI.. eisej eo ma + P 0 Y04t f1d ILjiiep 4jiltlll '

21 Plate 12-Full Size lt~i:j - =

22 Plate 13-Full Size J...,. - I Net; I c.w

23 Plate 14-Full Size I lt41tl:.l -$1.:fi13 f= & oo,.,.,.., ,...=i=:j:::~..:.::..."~''::~ "''ii':,::.:.:.i,;,,,,,:l,) ~ =-~~~~-=~ ~-~-- ~ -- - SPECIFY MEASUREMENT

24 Plate 15-Full Size...,..,

25 Plate 16-Full Size -~--- - IHiiP-4 l:iwal W I T l'e;j IB lfj@ellj m. ' ' ' ' i@i:im I I I ltd -

26 Plate 17-0ne-half Size.. I lliittij

27 Plate 18-0ne-half Size... SPECIFY MEASUREMENT,,.,.,

28 Plate 19-0ne-half Size ".-~ ' ~ ; j) B A -7-z I I CID. t.i!ltim J

29 Plate 20-0ne-half Size r.41#1 M

30 Plate 21~e-half Size 6402 F

31 Plate 22-0ne-half Size..,,,,.

32 Plate 23-0ne-half Size -,,1 P.JIIIW;i - i li I'!I I '.1! ilj!i, :- i, I i! I 'I,, I I l#itih

33 Plate 24-0ne-half Size li+j:ltf j. I,."Gitell *i 1*'' II #II#]

34 Plate 25-0ne-third Size :::!i!illlii!iui!!i!iill!ili!!!lli!fiipllliil!!\llilll!llll!l\ll\lillmlrullm!iuiuihiii 1 W:I 1 Specify Length

35 Plate 26-0ne-fourth Size...,... FAt.:Cet.l.:t l.i t..lt.:lehi filt.ieij.,.,.,. q:let-1 f...lt.:.ceti

36 Plate 27-0ne-fourth Size G-.!2.,..,, IWtl:l t-'ii#j#t.l

37 Plate 28-0ne-eighth Size ---- i ~ ' A it~ fjiie(ii!j t.41mt4 t41t61;j t~u II3 - HIC II4 t.<.tlfill l

38 Plate 29-0ne-eighth Size A..,....

39 Plate A Toggle Grinder Assembly 1

40 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts and are not to be used in ordering. Plate No. 1G 1GC 2 2A 2C 2S 2U 2CU 3 4B 4C 4E 4V 5 T5 6B 6E T6 7 7C 7G Cloth Plate, for Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1200 AD, 1700 A, 1700 B, 1700 F, 1700 H, 2600 F, 2600 G, 2600 J Cloth Plate, for styles in Class Cloth Plate Screws No. 80. Cloth Plate Slide, right, for Styles 1200 A, 1200 AC, 1200 AD, 2600] Cloth Plate Slide Stop, Screw No Cloth Plate Slide, left; also cloth plate slide, right, for Styles 1200 C, 1200 G, , 1200 Q,1700 A, 1700 B Cloth Plate Slide, right, for styles in Class Cloth Plate Slide, right, for Styles 1700 F, 1700 H, 2600 F, 2600G, 2600 H Cloth Plate Slide Thumbscrew No. 25 T. Cloth Plate Hinged Cover Latch Cloth Plate Hinged Cover Latch Screw No Cloth Plate Slide, right, for Style 1900 K Cloth Plate Slide Stop Screw No Cloth Plate Guard, for styles in Classes 1700, 2300; also for Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1200 AC, ~K.~~~~~~~J... Cloth Plate Guard Screw, front, No. 92 A. Cloth Plate Guard Screw, rear, No. 92. Cast-off Wire, for Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1700 A, 1700 B Cast-off Wire, for Styles 1200 AA, 1200 AD, 1700 G, 2600 J C, 5800 C, 5800 H, 5800 J Cast-off Wire for Styles in Class Cast-off Wire for Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600H Cast-off Wire Screw No Main Shaft Collar Main Shaft Collar Screws No. 95. Lower Toggle Adjusting Wedge, for sryles in Class Looper Eccentric Fork Shoe Looper Eccentric Fork Shoe Screw No. 94. Looper Eccentric Fork Looper Eccentric Fork Set Screws No. 72. Looper Eccentric Fork Clamp Screw No. 85. Lower Toggle Adjusting Wedge Nut Feed Rocker, non-floating design, for Styles~ F, 2600 G, 2600 H Feed Rocker, for Styles 2300 A, 2300 B, 2300 M, 2300 N.... Feed Rocker, floating design, for styles in Classes 1700, 2600, 5800, also Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1200 AC, 1200 AD, 1900 K Feed Rocker Screws No. 88. m m 38

41 LIST OF PARTS So::Jbol The figures in the last column refer only to the plates illustrating the parts Plate to derby and are not ~o be used in ordering. No. 7H Feed Rocker Arm, for use with feed rocker No. 7 G Feed Rocker Arm Screws No. 93. T7 Lower Toggle Adjusting Wedge Pin, for styles in Class Feed Rocker Shaft, solid, 5..fo inches long, hardened and ground, standard diameter.407 inch, fur styles with nonfloating design feed rocker I Feed Rocker Shaft, standard diameter plus.001 inch....[ Feed Rocker Shaft, standard diameter plus.003 inch Feed Rocker Shaft, standard diameter plus.006 inch Feed Rocker Shaft, standard diameter plus.009 inch Feed Rocker Shaft, standard diameter plus.012 inch... \ Feed Rocker Shaft, standard diameter plus.015 inch... SA Feed Rocker Shaft, 5fi inches long, for styles with floating design feed rocker C Feed Bar, for Styles 2300 A, 2300 B, 2300 M, 2300 N X Feed Bar, for Styles 1200 C, 1200 G, , 1200 Q, 1200 AC, 1200 AD, 1700 A, 1700 B, 1700 F, 1700 G, 2600 F, 2600 G, 2600H Feed Bar Screws No Feed Bar Prong and Sponge, for styles in Class 1700; also Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1200 AC, 1200 AD, 2300 A, 2300 B, 2300 M, 2300 N, 2600 F, 2600 G, 2600 H, 2600 J Feed Bar Prong Screws No A Feed Bar Prong Sponge Feed Bar Shaft, 3-tlr inches long, hardened and ground, for styles with non-differential feed T11 Lower Toggle, serrated one side, for Styles 2300 A, 2300 B, 2300 N, 2300 P, 2300 Q... 4 T11 A Lower Toggle, serrated both sides, for Styles 2300 M, 2300 R 4 Lower Toggle Screw No. T Feed Crank Cover, for Style 1700 G Feed Crank Cover Hinge Screw No. N. T12 Screw, for lower toggles Feed Crank Cover Spring, for Style 1700 G Feed Crank Cover Spring Screw No. 94. G13 Clamp Screw, for toggle grinder renewable bearing Tl3 Lower Toggle Adjusting Bushing, long, for styles in Class Tl3A Lower Toggle Adjusting Bushing, short, for styles in Class Hinge Screw, forfeed crank cover on Style 1700 G T14 Lower Toggle Nut, for styles in Class ' 39

42 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts and are not to be used in ordering. Plate No G16 T X 18 T18 19 T T21 T21A T21 B 22 22D 22E 22 I 22L 22Y T22 T A 24S 25 Feed Crank Link, for styles in Classes 1200, 1700, 2300, 2600, 5600, Feed Crank Link Shim No Feed Crank Link Screw, H inch long, No Feed Crank Link Nut No Feed Crank Link Screw, H inch long, No. 79, obsolete. Feed Crank Link Ferrule Toggle Grinder Emery Wheel Toggle Grinder Emery Wheel Washer No. G54. Toggle Grinder Emery Wheel Nut No. G57 A. Trimmer Pitman Pin, for styles in Class Trimmer Pitman Pin Screw No. 77. Feed Crank Stud, for styles in Classes 1200, 1700, 2300, 2600, 5600, Feed Crank Stud, for Style 1900 K Feed Crank Stud Nut; also for Nos. 36 R, A Trimmer Pitman Screw, front, for styles in Class Feed Crank Stud Cap, for styles in Classes 1200, 1700, 2300, 2600, 5600, Feed Crank Stud Cap Screws No. 77. Trimmer Pitman Bracket, for Styles 2300 A, 2300 B, 2300 M, 2300 N Trimmer Pitman Bracket Screws No Feed Crank Stud Washer; also for No A Feed Crank Link Pin Feed Crank Link Pin Screw No. 77. Upper Toggle, for Styles 2300 B, 2300 Q Upper Toggle,! inch long, with three teeth, for styles in Class Upper Toggle, for Styles 2300 A, 2300 N, 2300 P Upper Toggle Screw No. T22. Feed Dog, for Style , Feed Dog, for Styles 1200 G, 1200 Q,1700 F, 2600 F, 2600 H 6 Feed Dog, for Styles 1700 A, 1700 B, 2600 J... 6 Feed Dog, for Styles 1200 A, 1200 C, 1200 AD Feed Dog, for Styles 2300 A, 2300 B, 2300 N Feed Dog, for Style 1700 H... 6 Feed Dog Screw No. 93. Upper Toggle Screw, for styles in Class Upper Toggle Guide Screw Gauge, for Styles 1200 A, 1200 C, 1200 G, 1200 Q Gauge, for Style Gauge Screws No. 25. Gauge, for Styles 1700 F, 1700 H, 2600 A, 2600 F G 20 Gauge Screw No. 25 S. Thumbscrew, for cloth plate gauges

43 LIST OF PARTS so,_mbol The figures in the last column refer only to the plates illustrating the parts Plate to derby and are not to be used in ordering. No. 25B Screw, for loop retainer in Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600 H C Screw, h inch long, for cloth plate attachments S Screw, for cloth plate slide gauges; also for No T Thumbscrew, for cloth plate slides cc Screw, for cloth plate hinged cover; also for Nos. 396 D, T25 Upper Toggle Adjusting Block, for styles in Class UpperToggle Adjusting Block Guide Screws No. T Looper, for styles in Class 2300; also Styles 1200 A, 1200 C, 26 v 1200G, 12000, 1200Q,1700A, 1700B... 8 Looper, without guard, otherwise same as No. 26 VN VN Looper, with guard, for Styles 2600 A, 2600 D, 2600 F, ' 2600 G, 2600 H... 8 Looper Set Screw No. 73. A26 Looper Needle Guard, for loopers Nos. 26 VN, 5807, 6207 B.. 8 Looper Needle Guard Screw No. 73 A. Guide Screw, for upper toggle adjusting block, on styles in 27 v Class Loop Retainer, for Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600H Loop Retainer Screw No. 25 B. Loop Retainer Adjusting Screw, h inch long, No. 28 B. 27 X Loop Retainer, for Style 1900 K Loop Retainer Screw No. 87 U. Loop Retainer Adjusting Screw No T26 T27 Upper Toggle Adjusting Wedge, for styles in Class Upper Toggle Adjusting Wedge Nut No. T29. Upper Toggle Adjusting Wedge Set Screw No B Adjusting Screw, h inch long, for loop retainer Looper Rocker, hardened, for Style 1900 K v Looper Rocker, hardened, for Styles 1200 AC, 1200 AD, 1700 F, 1700 G, 2600 A, 2600 D, 2600 F, 2600 G, 2600 H.. 25 T29 Upper Toggle Adjusting Wedge Nu.t, for styles in Class Looper Rocker Frame, integral cone, hardened Looper Rocker Frame Screw, left, No. 88. Looper Rocker Frame Screw, right, No. 98. Looper Rocker Frame Spot Screw No. 96. T30 Upper Toggle Guide Screw Washer, for styles in Class Looper Rock Shaft, 3l inches long, hardened and ground, standard diameter.407 inch Looper Rock Shaft, standard diameter, plus.001 inch Looper Rock Shaft, standard diameter, plus.003 inch Looper Rock Shaft, standard diameter, plus.006 inch Looper Rock Shaft, standard diameter, plus.009 inch Looper Rock Shaft, standard diameter, plus.012 inch Looper Rock Shaft, standard diameter. plus.015 inch... G31 Toggle Grinder Frame

44 LIST OF PARTS Symbol to Order by The figures in the last colwnn refer only to the plates illustrating the parts and are not to be used in ordering. Plate No G32 33 G33 34 G34 35 G35 G36 t36 L t36 R 37 L 37 R v G38 A G39 40 G40 G41 41 A Looper Rock Shaft, 1 i- inches long, hardened and ground, standard diameter,.407 inch Looper Rock Shaft, standard diameter, plus.001 inch.... Looper Rock Shaft, standard diameter, plus.003 inch.... Looper Rock Shaft, standard diameter, plus.006 inch.... Looper Rock Shaft, standard diameter, plus.009 inch.... Looper Rock Shaft, standard diameter, plus.012 inch.... Looper Rock Shaft, standard diameter, plus ;015 inch.... Toggle Grinder Frame Slide Looper Rocker Stud, hardened, 1h inch diameter Toggle Grinder Frame Slide Adjusting Screw Looper Rocker Stud Nut, for use with.;,. inch stud; also for No A Toggle Grinder Frame Slide Gib Toggle Grinder Frame Slide Gib Screws No Looper connecting Rod, 6i inches long, for styles in Classes 2300, 5800; also Styles 1200 A, 1200 AD, 1700 G, 1900 K, 2600 A, 2600 D, 2600 F, 2600 G, 2600 H Toggle Grinder Clamp Toggle Grinder Clamp Screw No. 201 C. Toggle Grinder Clamp Pivot Pin Looper Connecting Rod Ball Joint Assembly, left Looper Connecting Rod Ball Joint Assembly, right Looper Connecting Rod Ball Joint Screws No. 97 A. Looper Connecting Rod Nut, left thread Looper Connecting Rod Nut, right thread Looper Eccentric, ground, for styles in Classes 2300, 5600; also Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1700 A, 1700 B, 5800 C, 5800 H Looper Eccentric, ground, for Styles 1200 AA, 1200 AC, 1700 F, 1700 H, 1000 K, 2600 A, 2600 D, 2600 F, 2600 G, 2600 J Looper Eccentric Screw No. 96. Toggle Grinder Turn Table Toggle Grinder Turn Table Pivot Stud Toggle Grinder Turn Table Pivot Stud Nut No M. Frame Looper Thread Guide, lower, right Toggle Grinder Turn Table Tilting Block Toggle Grinder Tum Table Tilting Block Screw No. 96. Toggle Grinder Tilting Shaft Hand Lifter, hardened, for styles in Class 5800; also Styles 1200A, 1200C, 1200G, 12000, 1200Q, 1200AA, 1200AC, 1700 A, 1700 B, 1700 F, 1700 H, 1900 K, 2300 A, 2300 B, 2300 M, 2300 P, 2300 Q, 2300 R, 2600 F, 2600 G, 2600 H, 2600 J, 5600 c Hand Lifter Stud No. 86. tseepage7 42

45 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts and are not to be used in ordering. Plate No. 42 A c 43 X G43 G44 G46 47 G47 48 G48 G49 50D G50 51 G51 A 52 A G52 53 A Hand Lifter Screw Pin, hardened...,.... Feed Lift Eccentric, ground, for styles in Classes 1200, 5600; also Styles 1700 A, 1700 B, 1700G, 2300A, 2300 B, 2300 M, 2300 N.... Feed Lift Eccentric, ground, for Styles 1700 F, 1700 H, 2600 F, 2600 G, 2600 H, 2600 J.... Feed Lift Cam, hardened and ground, for Style 1900 K.... Feed Lift Cam Screw No. 96. Toggle Grinder Tilting Shaft Arm....,Toggle Grinder Tilting Shaft Arm Screw No. 96. Toggle Grinder Knife Clamp Stop Screw Support.... Toggle Grinder Turn Table Spring Pin.... Needle Lever Stud Nut..... Toggle Grinder Pulley.... Toggle Grinder Pulley Screws No. 88. Needle Lever Stud Washer.... Toggle Grinder Spindle, hardened and ground.... Toggle Grinder Spindle Renewable Bearing, lower, right.... Needle Bar, hardened and ground, standard diameter.257 inch, for styles in Classes 1700, 2300, 2600, 5600, 5800; also Styles 1200 C, 1200 G, , 1200 Q, 1200 AA, 1200 AC, 1200 AD.... Needle Bar Set Screws, headless, No. 88. Needle Bar Set Screws, fillister head, No. 88 A. Toggle Grinder Spindle Renewable Bearing Cover, left... Toggle Grinder Spinclle RenewableBearingCoverScrewsNo.88. Needle Bar Connection, for styles in Classes 1700, 2 00, 5600, 5800; also Styles 1200 C, 1200 G, , 1200 Q, 1200 AA, 1200 AC, 1200 AD, 1900 K..... Toggle Grinder Spindle Cap..... Toggle Grinder Spindle Cap Screws No. 88. Needle Lever Thread Eyelet, for styles in Classes 1200, 1700, 2300, 5600, 5800; also Styles 1900 K, 2600 H, 2600 J and frame thread eyelet, for Styles 1900 K, 2600 A, 2600 D, 2600 F, 2600 G, 2600 H..... Thread Eyelet Screw No. 98 A. Toggle Grinder Spindle Collar.... Toggle Grinder Spindle Collar Screw No Needle Bar Thread Guide, for styles in Classes 1200, 1700, 2300, 5600, 5800; also Styles 1900 K, 2600 H, 2600 J... Needle Bar Thread Guide Screw, for styles h Classes 1700, 2300, 5600, 5800, and Styles 1200 C, 1200 G, , 1200 Q, 1200 AA, 1200 AC, 1200 AD, 1900 K, 2600 H, 2600 ], No Needle Bar Thread Guide Screw, for Style 1200 A, No. 605A i

46 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts Plate and are not to be used in ordering. No G53 54 G54 G55 56 G WB 57 we 57 WD G57 A v 59 X 60 A 60 A A A A A c 60 X 60 X X X X X c Toggle Grinder Spindle Oiler..... Needle Lever Link, hardened.... Toggle Grinder Emery Wheel Washer... :.... Toggle Grinder Emery Wheel Guard, left.... Toggle Grinder Emery Wheel Guard Screws No Needle Clamp Nut, hardened.... Toggle Grinder Emery Wheel Guard, right.... Toggle Grinder Emery Whee! Guard Screws No. 93 A. Looper Thread Nipper Spring, upper..... Looper Thread Nipper Spring Screw No. 90. Needle Bar Thread Nipper Plate.... Needle Bar Thread Nipper Spring Needle Bar Thread Nipper Stud; also for No C.... Toggle Grinder Emery Wheel Nut.... Looper Thread Nipper Spring, lower..... Looper Thread Nipper Spring Screw No. 90. Looper Thread Nipper Spring Operating Screw No. 97. Eccentric Pulley, throw.461 inch, for Styles 1200 AC, 1700 F. Eccentric Pulley, throw.634 inch, for Style 1900 K..... Eccentric Pulley Screws No Presser Bar, hardened and ground, standard diameter.319 inch, for styles in Classes 1200, 1700, 2300, 5600, 5800; also Styles 2600 F, 2600 G, 2600 H, Presser Bar, standard diameter, plus.003 inch.... Presser Bar, standard diameter, plus.006 inch.... Presser Bar, standard diameter, plus.009 inch.... Presser Bar, standard diameter, plus.012inch.... Presser Bar, standard diameter, plus.015 inch.... Presser Bar, hardened and ground, standard diameter.319 inch, for Styles 2600 A, 2600 D.... Presser Bar,.harden~d and ground, standard diameter.319 inch, for Style 1900 K..... Presser Bar, standard diameter, plus.003inch.... Presser Bar, standard diameter, plus.006 inch.... Presser Bar, standard diameter, plus.009 inch.... Presser Bar, standard diameter, plus.012 inch.... Presser Bar, standard diameter, plus.015 inch.... Presser Bar Connection, for styles in Classes 1200, 1700, 2300, 2600, 5600, Presser Bar Connection Screw, front, No. 77. Presser Bar Connection Screw, rear, No. 88. Presser Guide Bar, hardened and ground, standard diameter.319 inch, for E?tyle 1900 K.... Presser Gu.ide Bar, standard diameter, plus.003 inch.... Presser Guide Bar, standard diameter, plus.006 inch.... Presser Guide Bar, standard diameter, plus.009 inch.... Presser Guide Bar, standard diameter, plus.012 inch

47 LIST OF PARTS Symbol to Order by The furores in the last column refer only to the plates illustrating the parts ana are not to be used in ordering.. Plate No A 62 A A A A A c 62 C ~ ~328 62~1 62 ~334 63A 63B 64 64A 64B 64X A 65 c 65F 65G 65 H 65L 65T Presser Guide Bar, standard diameter, plus.015 inch.... Presser Guide Bar, hardened and ground, standard diameter.319 inch, for styles in Class 5800; also Styles 1200 AD, 2600 A, 2600 D.... Presser Guide Bar, standard diameter, plus.003 inch.... Presser Guide Bar, standard diameter, plus.006 inch.... Presser Guide Bar, standard diameter, plus.009 inch.... Presser Gtlide Bat, standard diameter, plus.012 inch.... Presser Guide Bar, standard diameter, plus.015 inch.... Presser Guide Bar, hardened and ground, standard diameter.319 inch, for styles in Classes 1700, 2300, 5600; also Styles 1200A, 1200 C, 1200 G, , 1200 Q, 1200 AA, 1200 AC, 2600 F, 2600 G, 2600 H, 2600 J.... Presser Guide Bar, standard diameter, plus.003 inch.... Presser Gt1ide Bar, standard diameter, plus.006 inch.... Presser Gt1ide Bar, standard diameter, plus.009 inch.... Presser Guide Bar, standard diameter, plus.012 inch.... Presser Guide Bar, standard diameter, plus.015 inch.... Presser Spring, for Styles 1200 C, 1200 G, , 1200 Q, 1700A, 1700B,2300A,2300 B, 2300P, 2300Q, 5600C... Presser Spring, for styles in Classes 2800, 5800; also Styles 1200 A, 1200 AA, 1200 AC, 1700 F, 1700 H, 1900 K, 2300 M, 2300 N, 2300 R.... Presser Spring Rest.... Presser Spring Rest Screw No. 88. Presser Spring Regulating Screw, for styles in Classes 1200, 1700, 2300, 2600, 5600, Presser Spring Regulating Screw Lock Nut.... Presser Spring Regulating Screw, for Style 1900 K..... Presser Foot, for Style 1200 A.... Presser Foot, for Styles 1200 C, 1200 AD.... Presser Foot, for Styles 2300 A, 2300 B, 2300 M, 2300 N, 2300 P, 2300 Q... :..... Presser Foot, for Style Presser Foot, for Style 1200 G.... Presser Foot, for Style 1200 Q.... Presser Foot, for Style 1700 B.... Presser Foot, for Style 2600 F...,.... Presser Foot Clamp Screw No. 91. Main Shaft, hardened and ground, standard diameter.530 inch, for styles in Classes 1200, 1700, 2300, 2600, 5600, 5800 Main Shaft, standard diameter, plus.001 inch.... Main Shaft, standard diameter, plus.003 inch.... Main Shaft, standard diameter, plus.006 inch Main Shaft, standard diameter, plus.009 inch.... Main Shaft, standard diameter, plus.012 inch

48 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illusrtating the parts Plate and are not to be used_ in ordering. No B 69 s 0 69 FD A A A 84 B A u 88 88A A D See page 7. Main Shaft Sleeve, left, 1 -fi- inches long, for styles in Classes 1200, 1700, 5600; also Styles 2300 A, 2300 B, 2300 M, ~~~~~~~a~j... Main Shaft Sleeve, right, 1H inches long with lug Main Shaft Sleeve, 1H inches long, without lug Thread Stand Pin, 4 inches long, for styles in Classes 1200, 1700, 2300, 2600, 5600, Screw, square head, cup point, rlf inch diameter, 18 threads to inch, t inch long, for thread stand seats; also for Nos D, 21685, F, K Looper Eccentric Sponge Holder and Sponge Looper Eccentric Sponge Holder Screw No. 93. Looper Eccentric Sponge.... Set Screw, for looper eccentric fork... 9 Set Screw, fillister head, for loopers Screw, for looper needle guard, also for No Screw, for feed crank stud caps; also for Nos. T16, 21, 61 C, 1286A Screw, lower, for needle lever link pin Clamp Screw, for needle rear guard in Style 1200 AD Screw, for cloth plates Screw, for regulating length of stitch Stitch Regulating Ferrule, for Styles 1200 AA, 2600 A, 2600 D, 2600 F, 2600 G, 2600 H, 5600 C, 5800 C, 5800 H, 5800 J Stitch Regulating Ferrule, for styles in Classes 1700, 2300; also for Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1200 AC, 1200 AD, 2600 J Clamp Screw, for looper eccentric fork Stud, for hand lifters; also for No Screw, plus size, for hand lifters, tap No. V Screw, for throat plates; also for Nos. 148 A, 196, 196 D, 9725, D...:... 9 Screw, for needle thread take-up wire; also for Nos. 27 X, 2366 B, 2366 E, 5005 P, 5805 X, 5826 B, 5826 D, 21607, Screw, headless, for feed rockers; also for Nos. 30, G47, 50 D, G50, G51 A, 61 C, 64, 217, 406 B, 1288, 1917 K, 1920 K, 4517, 8648, 15063, F, B, D Set Screw, fillister head, for needle bars; also for No Screw, for looper thread take-ups Screw, for looper thread nipper springs; also for Nos P, 2305 R, L, E Clamp Screw, for presser feet Screw, rear, for cloth plate guard Screw, front, for cloth plate guard w

49 LIST OF PARTS S~bol The figures in the last column refer only to the plates illustrating the parts Plate to Order by and are not to be used in ordering. No. 93 Screw, for feed dog in Styles 1200 C, 1200 G, , 1200 Q, 93 A A A B v ! 105-2! ! AC, 1200AD, 1700A, 1700B, 1700 F, 1700G, 2600F, 2600 G, 2600 H, and under feed dog in Styles 2600 A, 2600 D, 5800C, 5800H, 5800]; also for Nos. 7H, 70,5150, 5650, 5842 A, 7638 A, F, K Screw, for feed dog in Styles 1200 A, 1700 H, 1900 K, 2300 A, 2300 B, 2300 M, 2300 N; also for Nos. G56, 419 A, 911, 912, 1905 J. 233o, 5045, K Screw, for looper eccentric fork shoe; also for Nos. 13, 104, 113, 113 A, 202 A, 404 A, 539, 1825, 1941, 2340, 5132, 9932, Screw, for main shaft collar; also for No Screw, for looper eccentrics; also for Nos. 30, G40, 43, 43 C, 43 X, G43, 917, Screw, H inch long, for supporting feed dogs; also for Nos. 58, 103, 403, 2334, Screw, for looper connecting rod ball joint assemblies Screw, right, for looper rocker frame; also for Nos. 111, 334, 482, 2650, Screw, for needle lever thread eyelet; also for No S Cloth Plate Slide, rear, for styles in Class Thread Stand Wire, 16 inches long, for styles in Classes 1200, 1700, 2300, 2600' 5600, Thread Stand Wire Screw, headless, 24 threads to inch, No , obsolete. Thread Stand Wire Screw, square head, 24 threads to inch, No F-24. Looper Thread Take-up, for styles in Class 2300; also Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1700 A, 1700 B, 2600]..., Looper Thread Take-up, for styles in Classes 5600, 5800; also Styles 1200 AA, 2600 A, 2600 D F, 2600 G, 2600 H... 3 Looper Thread Take-up Screw No. '89. Looper Thread Take-up Eyelet Stand, for styles in Classes 1200,1700,2300,2600,5600, Looper Thread Take-up Eyelet Stand Screws No Looper Thread Take-up Eyelet, for styles in Classes 1200, 1700, 2300, 2600, Looper Thread Take-up Eyelet Adjusting Screw No. 97. Looper Thread Take-up Eyelet Sprtng, for styles in Classes 1200,1700,2300,2600,5600, Looper Thread Take-up Eyelet Spring Screw No. 94. Thumbscrew, 1t!nches long, for fastening machine to table 18 Thumbscrew, 22 mches long Thumbscrew, 3 inches long Thumbscrew, 3!.inches long Tension Spring F.errule , 47

50 LIST OF PARTS Symbol The figures in the last column refer only to the plates illustrating the parts Plate to Order by and are not to be used in ordering. No V c 112 E 112 s cc 112 CN A Vl B V P39A 141 t See page 7. Tension Regulating Nut, knurled Tension Disc, hardened and lapped Tap, marked "J2" for No Tension Spring,.022 inch diameter wire, for looper thread on Styles 1200 AD, 1700 G Tension Spring,.026 inch diameter wire, for looper thread on styles in Classes 2300, 2600, 5600, 5800; also Styles 1200 A, 1200 C, 1200 G,1200 0, 1200Q, 1200 AA, 1200 AC, 1700 ~ B, 1700 F, 1700 H and for needle thread on Style 1900 K Tension Spring,.028 inch diameter wire, for needle thread on Styles 2300 A, 2300 B, 2300 N, 2300 P, 2300 Q; also for No Tension Spring,.040 inch diameter wire, for needle thread on Styles 1200 A C, 1200 G, , 1200 Q, 1200 AC, 1700B,1700F,1700H, 2300M, 2300R, 2600H, 2600J Tension Spring,.048 inch diameter wire, for needle thread on Styles 2600 A, 2 00 D, 2600 F, 2600 G Tension Thread Eyelet, with two eyes, for styles in Classes 1200, 1700, 2300, 2600, 5600, Tension Thread Eyelet Screw No. 98. Throat Plate, for Styles 1200 A, 1200 C Throat Plate, for Styles 2300 B, 2300 M Throat Plate, for Style Throat Plate, for Styles 1200 G, 1200 Q... 1 Throat Plate, for Style 1700 H Throat Plate, for Style 2600 F Throat Plate, for Styles 2300 A, 2300 N Throat Plate Screws No. 87. Frame Thread Guide, adjustable, 2t inches long, for styles in Classes 2300, Frame Thread Guide, adjustable, 1 inch long, for Styles 1200 A, 1200 C, 1200 G, , 1200 Q; 1200 AA, 1200 AC, 1700 A, 1700 B, 1700 F, 1900 K, 5600 C Frame Thread Guide Screw No Tap, marked "Q2", for No. 86 A Wrench,..;.,. inch, for needle clamp nut Thread Hook, for looper threads Thread Tweezers Tap, marked "X2", for plus size cloth plate screw No Screw, for cloth plate hinge cover latch Needle Thread Controller Lever Eyelet, for Styles 1700 H, 2600J Screw, for needle thread controller lever eyelet Needle Thread Controller Lever Assembly, for Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600 H Needle Thread Controller Lever Screw

51 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts Plate and are not to be used in ordering.. No. 148 A A 188D D 201C 202A 202 B D 399 A A 406 B 407 A Throat Plate Needle Guard, hardened, for Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600 H Throat Plate Needle Guard Screw No. 87. Stop Screw, for cloth plate slides Needle Lever Buffer, wood fibre Needle Lever Ball, hardened Binding Holder Disc Supporting Collar, for Styles 5800 H, 5600]...,..., Looper Rocker, hardened, for styles in Class Screw, for binding guide adjustments Set Screw, knurled head, for roller support swinging arm Throat Plate Needle Guard, hardened, for Styles 1700 A, 1700 B, 2600 J Throat Plate Needle Guard, hardened, for Styles 1200 AC, 1700F..... : Throat Plate Needle Guard Screw No. 87. Screw, for toggle grinder clamp Needle Thread Pull-off and Take-up Wire Post, for Styles 1200 AC, 1700 F, 1700 H Needle Thread Pull-off and Take-up Wire Post Screw No. 94. Needle Thread Take-up Wire, for Styles 1200 AC, 1700 F, 1700 H Needle Thread Take-up Wire Screw No. 87 U. Looper Rocker, hardened, for Styles 1200 A, 1200 C, 1200 G, , 1200 Q, 1700 A, 1700 B, 1700 H, 2600 J Needle Thread Controller Rack, for Styles 2600 A, 2600 D, 2600 F, 2600 G, 2600 H Needle Thread Controller Rack Screws No. 88. Trimmer Stand Adjusting Rod Lock Nut, left thread, for styles in Class Screw, hexagon head, for upper feed bar spring Tension Thread Eyelet, with one eye, for Style 1900 K Tension Thread Eyelet Screw No. 98. Welt Gauge Base, for Style 2600 D Welt Gauge Base Screws No. 25 CC. W e!t Gauge Slide Welt Gauge Slide. Spring Welt Gauge Slide Spring Screw Welt Gauge Slide Screw Pin, hardened; also for No. 410 A.. 10 Welt Gauge Slide Lever Welt Gauge Slide Lever Stud No. 86. Welt Gauge Slide Lever Screw No. 97. Welt Gauge Slide Lever Stop Plate Welt Gauge Slide Lever Stop Plate Screws No. 94. Welt Guide, adjustable Welt Guide Screw; also for No. 409 A Welt Guide Height Adjusting Screw No

52 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts and are not to be used in ordering. Plate No. 409 A 410 A B 419 A A 426 B A Y Y Y Y Y Y Y Y Y Y Y Y Y Y Welt Guide Tongue, adjustable Welt Guide Tongue Screw No A. Flexible Guide Flexible Guide Screw Pin No Oil Can, with spout Lifter Lever Casting, for styles in Classes 2600, 5800; also Styles 1200 A, 1200 C, 1200 G, 1200 AA, 1200 AC, 1200 AD, 1700 F, 1700 H, 1900 K, 2300 N, 2300 R Lifter Lever Extension Lifter Lever Extension Screws No. 93 A. Lifter Lever Stud Lifter Lever Chain Lifter Treadle Rest Lifter Treadle Pin Lifter Treadle Pin Set Screw, 24 threads to inch, No Lifter Treadle Pin Set Screw, 32 threads to inch, No. 98, obsolete. Lifter Lever Spring Lifter Lever Spring Pin Lifter Lever Stop Pin Binding Holder Disc, 6 inches diameter, for Style 5600 C Binding Holder Axle, for Styles 2600 H, 5600 C Binding Holder Spring Latch Binding Holder Tension Spring Binding Holder Tension Nut, knurled Binding Holder Tension Lock Nut, knurled Collar, for floating design feed rocker shaft on styles in Classes 1700, 2600, 5800; also Styles 1200 A, 1200 C, 1200 G , l200 Q, 1200 AC, 1200 AD, 1900 K Collar Screw No. 98. Expansion Reamer, for needle bars, size.257 inch Expansion Reamer, size.260 inch.... Expansion Reamer, size.263 inch.... Expansion Reamer, size.266 inch.... Expansion Reamer, size.270 inch.... Expansion Reamer, size.273 inch.... Expansion Reamer, for presser bars and presser guide bars, size.319 inch... : Expansion Reamer, size.322 inch.... Expansion Reamer, size.325 inch.... Expansion Reamer, for feed rocker shafts and feed bar shaft, size.407 inch Expansion Reamer, size.410 inch.... Expansion Reamer, size.413 inch.... Expansion Reamer, for main shafts, size.530 inch Exoansion Reamer, size.533 inch

53 LIST OF PARTS Symbol to Order by The figures in the last column refer only to the plates illustrating the parts and are not to be used in ordering. Plate No. Y A Y800 Y801 Y ;) A Seepage7. Expansion Reamer, for needle bars, size.200 inch Screw, for toggle grinder emery wheel guard, left Frame Thread Eyelet, adjustable, for Styles 1200 AD, 1700 G. 24 Frame Thread Eyelet Screw No. 94. Frame Thread Eyelet Guide Pin Screw, for presser foot spring on Style 1900 K Screw, for needle bar thread guide, on Style 1200 A Stove Bolt, flat head, l x 1l inches, for knee lifter shaft hanger, rear.... Stove Bolt, flat head, l x 3 inches.... Ball,.0625 inch diameter, for rolling presser foot.... :. Taper Reamer, for lever end of needle lever stud.... Taper Reamer, for frame end of needle lever stud.... Taper Reamer, for needle lever link pins and feed crank link pin Cloth Plate Slide, right, fpr Style 2600 A Cloth Plate Slide, right, for Style 2600 D Feed Rocker, non-floating desigu, for Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J Feed Rocker Screws No. 88. Feed Bar, for under feed, in Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J Feed Bar Screws No. 88. Feed Bar, for upper feed, in Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J Upper Feed Bar Spring, for Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J... ; Upper Feed Bar Spring Screw No Adjusting Screw, hexagon head, for upper feed bar spring, in Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J Adjusting Scre'W, hexagon head, for upper feed dog on Styles 2600 A, 2600 D Upper Feed Dog Adjusting Screw Lock Nut; also for No : Feed Bar Prong and Sponge, for Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 ] Feed Bar Prong Screws No. 94. Upper Feed Dog, for Styles 36oo A, 2600 D.... Upper Feed Dog Screw No. f'~a. Upper Feed Dog Holder, for Styles l,l600 A, 2600 D.... Upper Feed Dog Holder Screws No. 93 A. Feed Lift Eccentric, ground, for Styles 2600 A, 2600 D, 5800 C, 5800 H, 5800 J.... Feed Lift Eccentric Screw No. 96. Presser Foot, for Style 2600 A...,.... Presser Foot, for Style 2600 D.... Presser Foot Clamp Screw No