Parts List: VBS-3612 Band Saw
|
|
|
- Brook Harmon
- 6 years ago
- Views:
Transcription
1 Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS Gear Box TS Socket Head Cap Screw...3/8-16 x 2-1/ TS Lock Washer...3/8" TS Flat Washer...3/8" TS Set Screw...3/8-16 x 1" VBS Oil Seal...Ф40 x Ф30 x 7mm VBS Oil Seal...Ф52 x Ф30 x 7mm VBS Gear Box Cover TS Hex Cap Screw...1/4-20 x 1/2" TS Lock Washer...1/4" TS Flat Washer...1/4" VBS Gear VBS Key...6 x 35mm VBS Oil Seal...Ф30 x Ф19 x 8mm VBS Retaining Ring VBS Gear VBS Screw Nut...35mm VBS Screw Nut...26mm VBS Gear VBS Gear Shaft VBS Key...1/4 x 5/8" VBS Shaft Cover TS Socket Head Cap Screw...1/4-20 x 3/4" VBS Gear VBS Main Shaft VBS Retaining Ring...30mm VBS Main Shaft Cover VBS Oil Seal...Ф58 x Ф40 x 8mm VBS Speed Changing Shaft VBS Speed Changing Arm TS Hex Nut...1/4" VBS Shaft Stopper TS Socket Set Screw...5/16-18 x 1/ VBS Spring VBS Slide Block VBS Clutch VBS Brass Bushing VBS Brass Bushing VBS Speed Changing Lever VBS Shaft Housing VBS Socket Head Cap Screw x 5/8" VBS Speed Lever Ring TS Socket Head Cap Screw...3/8-16 x 3/4" VBS Pulley...10 A TS Socket Head Cap Screw...3/8-16 x 1-1/ VBS Lever Knob BB Ball Bearing BB Ball Bearing BB Ball Bearing A... VBS A...Work Table VBS Table Support Frame TS Hex Cap Screw...3/8-16 x 1-1/ VBS Table Support Housing Socket Head Cap Screw doesn t match SAP...1/2"-12 x TS Lock Washer...1/2" TS Flat Washer...1/2"
2 Index No. Part No. Description Size Qty TS Hex Nut...5/ VBS1220M Guide Support Housing TS Socket Head Cap Screw...5/16-18 x 1" TS Lock Washer...5/16" TS Flat Washer...5/16" TS Socket Head Cap Screw...M6 x VBS Right-Handed Screw...1/4 x 1" TS Socket Head Cap Screw...1/4-20 x VBS Left-Handed Screw VBS Slider VBS Table Tilt Adjust Screw VBS Auxiliary Table VBS Auxiliary Table Support Frame VBS Table Bracket TS Socket Head Cap Screw...3/8-16 x 1-1/ TS Socket Head Cap Screw...3/8-16 x 1-3/ VBS Bracket TS Hex Nut...3/8" VBS Adjust Screw VBS Miter Gauge TS Socket Head Cap Screw...5/16-18 x 1-1/ TS Socket Head Cap Screw...M6 x TS Phillips Pan Head Machine Screw...M5 x TS Lock Washer...M VBS Rip Fence VBS Circle Cutting Attachment TS Socket Head Cap Screw...5/16-18 x 1" VBS Hex Cap Screw...1/4"-20 x 2-3/ VBS Holding Jaw VBS Feed Screw VBS Magnifying Glass TS Phillips Pan Head Machine Screw...M5 x TS Flat Washer...M VBS Blade Guide Support VBS Blade Guide Support VBS Blade Guides TS Socket Head Cap Screw...M6 x TS Lock Washer...M TS Flat Washer...M VBS Blade Stopper VBS Blade Stopper VBS Blade Guide Post VBS Gear Rack TS Socket Head Cap Screw x 1/2" VBS Guide Post Housing VBS Blade Guard, Left VBS Blade Guard, Right VBS Spring VBS Spring Locker TS Socket Head Cap Screw...1/4-20 x 1-1/4" VBS Post Housing Spring VBS Post Elevating Gear TS Flat Washer...M TS Hex Nut...M VBS Guide Post Locker VBS Handwheel TS Socket Set Screw...5/16-18 x 1/2" VBS Handwheel Knob VBS Main Drive Motor...3HP 3PH
3 Index No. Part No. Description Size Qty TS Hex Cap Screw...5/16-18 x 1" VBS Motor Pulley...4-1/8 A VB-A44...V-Belt VB-A50...V-Belt BA62...V-Belt VBS2012-BV875...V-Belt VBS1220A Lower Wheel VBS1220A Rubber Tire VBS Rubber Tire VBS Tapered Sleeve VBS Wheel Locking Nut VBS1220A Upper Wheel VBS Auxiliary Wheel VBS Upper Wheel Lock VBS Upper Wheel Nut VBS CP...Slide Block Housing TS Socket Head Cap Screw...3/8-16 x VBS Auxiliary Wheel Shaft TS Socket Set Screw...3/8-16 x 3/4" VBS Slide Block Seat VBS Slide Block Guide TS Socket Head Cap Screw...3/8-16 x 1-1/ VBS Upper Wheel Slider TS Socket Set Screw...1/4"-20 x 3/8" VBS Slider Cover VBS Slider Screw Shaft VBS Slider Pin VBS Wheel Elevation Shaft VBS Spring VBS Washer VBS Indicator Rings VBS Tension Indicator VBS Wheel Tilt Adjuster VBS Wheel Tilt Connector VBS Connector Washer VBS Connector Housing TS Socket Head Cap Screw...M8 x VBS Handwheel TS Socket Head Cap Screw...5/16-18 x 5/8" VBS Wheel Tilt Knob G Ball Bearing BB Ball Bearing VBS Air Pump Suspension Arm TS Hex Cap Screw...5/16-18 x 3/4" VBS Air Nozzle VBS Air Nozzle Clip VBS Air Compressor VBS Main Body VBS Rear Door, Right VBS Rear Door, Left TS Pan Head Screw...M5 x VBS Front Lower Door VBS Front Upper Door, Right VBS Front Upper Door, Left VBS Upper Door Hinge TS Phillips Pan Head Machine Screw...M5 x TS Hex Nut...M TS Phillips Pan Head Machine Screw...M5 x VBS Hinge
4 Index No. Part No. Description Size Qty VBS Spring Plate VBS Handle Arm TS Phillips Pan Head Machine Screw...M6 x TS Hex Nut...M Chip Stopper TS Phillips Pan Head Machine Screw...M8 x VBS Pointer VBS Brush Bracket TS Lock Washer...M TS Hex Cap Screw...1/4"-20 x 3/4" VBS Chip Brush VBS Eye Bolt VBS Push button, On VBS Push button, Off VBS Emergency Stop Switch VBS Limit Switch VBS Key Switch VBS Main Switch TS Phillips Flat Head Machine Screw...M4 x VBS Contactor TS Phillips Pan Head Machine Screw...M4 x VBS Overload Relay VBS Pilot Light, Green (Power) VBS Voltage Reducer TS Phillips Pan Head Machine Screw...M4 x VBS Fuse Block TS Phillips Pan Head Machine Screw...M6 x VBS Fuse Holder VBS Fuse Holder VBS Wire Housing VBS Ground Seat VBS Electrical Box TS Socket Head Cap Screw...M5 x VBS Wiring Plate TS Round Head Screw x 1/4" VBS Wiring Duct VBS Control Plate VBS Copper Pan Head Screw...M4 x VBS Indicator Plate VBS Variator Instruction VBS Gear Box Instruction VBS Tilt Indicator Scale VBS CP...Motor Spring Housing TS Hex Cap Screw...5/16-18 x 1-1/4" VBS Spring VBS Variator Disk, Upper Outer TS Socket Head Cap Screw...5/16-18 x 3/4" VBS Variator Disk, Upper Inner VBS Variator Housing Tube VBS Variator Disk Shaft TS Socket Head Cap Screw...M4 x VBS Key...6 x 80mm VBS Variator Housing VBS Retaining Ring VBS Pulley...9 A TS Socket Head Cap Screw...3/8-16 x 1" VBS Worm Gear TS Socket Head Cap Screw...1/4-20 x 5/8" VBS Worm Gear Housing
5 Index No. Part No. Description Size Qty TS Set Screw...1/4"-20 x 5/8" VBS Gear Shaft VBS Worm TS Socket Set Screw...1/4"-20 x 3/8" VBS Arm VBS Screw Nut BB Ball Bearing VBS Spring Housing VBS Spring VBS Variator Disk, Lower Outer VBS Variator Disk, Lower Inner VBS Variator Shaft VBS Key...6 X 60mm VBS Shaft Housing VBS Spacer VBS Socket Head Cap Screw x 5/8" VBS Pulley...4-1/8 A VBS Speed Readout Detector VBS1220M Digital Tachometer BB Ball Bearing TS Socket Head Cap Screw...M5 x TS Socket Set Screw...M8 x BB Ball Bearing Optional Accessories Stock No Description Replacement Blade 1/4" x.025" x 197" x 14R-C 34
6 VBS-3612 Band Saw 35
7 VBS-3612 Band Saw 36
8 Parts List: Welder, Shear and Work Lamp Assemblies (refer to breakdown on page 39) Index No. Part No. Description Size Qty 1... JWG Limit Switch PR-EV Insulator VBS Pan Head Bolt...1/8-32 x 5/8" TS Lock Washer...1/8" PR-EV Guide Block TS Socket Head Cap Screw...M5 x TS Lock Washer...M PR-EV Spring Bracket TS Phillips Pan Head Machine Screw...M5 x PR-EV Guide Casting TS Flat Head Screw...M5 x PR-EV Housing TS Phillips Pan Head Machine Screw...M5 x PR-EV Stationary Jaw TS Socket Head Cap Screw...M5 x PR-EV Insulator PR-EV Insulating Tubes PR-EV Washer, Insulate PR-EV Spacers PR-EV Eccentric Shafts PR-EV Clamp Lever, Right TS Round Head Screw...5/16-18 x 3/4" TS Hex Nut...5/16" PR-EV Clamp Lever, Left PR-EV Clamp Support, Right PR-EV Clamp Support, Left PR-EV Clamp Plate, Right TS Phillips Pan Head Machine Screw...M5 x TS Lock Washer...M PR-EV Clamp Plate, Left PR-EV Retaining Ring (Re7) PR-EV Moving Jaw TS Socket Head Cap Screw...M5 x JWG Weld Button PR-EV Pressure Adjust Knob PR-EV Shaft TS Lock Washer...1/4" TS Flat Washer...1/4" TS Hex Nut...1/4" PR-EV Cam PR-EV Weld Tension Arm TS-081F052...Phillips Pan Head Machine Screw...1/4"-20 x 5/8" PR-EV Bushing PR-EV Spring, Short PR-EV Spring, Long VBS Pan Head Screw...M5 x TS Hex Nut...M VBS1220M Transformer VBS Copper Pan Head Screw x 3/8" TS Lock Washer...3/16" PR-HV Mounting Bracket TS Flat Head Screw...M5 x TS Hex Cap Screw...1/4"-20 x 4" PR-EV Switch PR-EV Grinder Motor PR-EV Spacer...M
9 Index No. Part No. Description Size Qty PR-EV Grinder Wheel TS Flat Washer...M TS Hex Nut...M VBS1220M Grinder Guard PR-EV Grinder Cover JWG Welder Name Plate PR-EV Instruction Label PR-EV Grinder Label PR-HV Anneal Button VBS Deflector Bracket, Right VBS Pan Head Screw...M4 x VBS Wood Screw...1/8 X 1/4" VBS Deflector Bracket, Left VBS Spark Deflector PR-EV Knobs VBS Light Shield VBS Shield Jointer VBS Brass Nut VBS Lamp Arm VBS Arm Tubes VBS Tube Holder VBS Arm Nuts VBS Tube Locks VBS Arm Housing Adjust VBS Housing Adjust Screw VBS Lamp Arm Housing VBS Holder, Upper TS Socket Head Bolt...5 X 35mm VBS Holder, Lower VBS Lamp Socket VBS Washer VBS Nut TS Flat Washer...10mm VBS Rotating Button VBS Brass Handwheel PR-EV Spindle Bushings TS Socket Head Bolt...1/4 X 5/8" TS Socket Head Bolt...1/4 X 1½" PR-EV Spindle Lift VBS Retaining Ring...5mm PR-EV Blade Shaft VBS Retaining Ring...25mm PR-EV Vaned Iron Plates VBS Pan Head Bolt...3/16 X 3/8" PR-EV Lower Blades PR-EV Upper Blade PR-EV Joint Plate, Left TS Socket Head Bolt...5/16 X 5/8" TS Lock Washer...5/16" PR-EV Chain Joint, Right PR-EV Handle Bar PR-EV Knob
10 Welder, Shear and Work Lamp Assemblies 39
11 Electrical Connections 3Ph, 230/460V 40
12 Electrical Connections 3Ph, 230/460V SB1 Weld On (White) SA4 Key Switch SQ6 Safety Switch SB2 Anneal On (Green) HL Indicator Light (Green) KM Contactor SB3 Emergency Stop (Red) EL Lamp (60W, 115V) FR Overload Relay SB4 Main Motor Off (Red) QS General Switch T2 Transformer SB5 Main Motor On (Green) SQ1 Safety Switch SA1 Grinder Motor On SQ2 Safety Switch SA2 Work Lamp On (Black) SQ5 Weld Auto Stop 41
13 Electrical Box (see page 41 for identification of parts) 42
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
G8146Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8146Z Cabinet Breakdown & Parts List 29 30 31 32 35 33 34 14 16 18 11 12 10 8 15 17 9 13 22 21 19 20 24 25 4 4-1 7 4-2 4-4 3 2 5 4-3 6 19 20 23 27 28 26
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
G8145Z Cabinet Breakdown & Parts List
PROG FUN DATA KEYPAD RPM T.S MPM RUN STOP RESET G8145Z Cabinet Breakdown & Parts List 14 11 12 16 18 8 10 15 17 9 13 21 22 19 20 24 25 7 4 3 5 6 23 2 19 20 27 28 26 1 1 P8145Z001 WHEEL DOOR LOWER 15 P8145Z015
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
Parts List: Column Assembly
Column Assembly 39 Parts List: Column Assembly Index No. Part No. Description Size Qty 1... WP2510-401...Idler Support Base... 1 2... TS-1540071...Hex Nut...M10... 2 3... TS-1550061...Flat Washer...M8...
Replacement Parts. Parts List: Body Assembly
Replacement Parts To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
Parts List Index No. Part No. Description Size Qty
Parts List Index No. Part No. Description Size Qty 1... TS-1541031...Lock Nut...M8... 4 2... JJP12-002...Washer... 4 3... JJP12-003...Outfeed Table Bracket Shaft... 1 4... JJP12-004...Outfeed Table Bracket,
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
for GH-1340W/1440W Lathes
PARTS LIST and Electrical Diagrams for GH-1340W/1440W Lathes See manual no. M-321810 for operating and maintenance instructions. WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
321357T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES
GHB-1340A METALWORKING LATHE 321357T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0) 44
PARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
Upper Wheel Assembly Exploded View
Upper Wheel Assembly Exploded View 36 Upper Wheel Assembly Parts List Index No. Part No. Description Size Qty 1... JWBS18-135...Hex Nut...5/8-18UNF, LH... 1 2... PM1800-102...Flat Washer... 1 3... BB-6204VV...Ball
12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
Headstock Gear System
Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-
-79- Model W1819/W1820 (Mfg. Since 09/11) 155V2 155-1 155-2 155-3V2 155-6 155-5 108 109 109 156 110 110 168 169 170 171 101 102 103 104 105 106 107 108 109 114 115 118 119 120 121 122 123 124 125 126 127
Operating Instructions and Parts Manual Model JWS-25X Shaper
Operating Instructions and Parts Manual Model JWS-2X Shaper JET 27 New Sanford Road LaVergne, Tennessee 7086 Part No. M-70809 Ph.: 800-27-688 Revision A2 02/20 www.jettools.com Copyright 20 JET Table Parts
Disc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
Upper Wheel Assembly Index No. Part No. Description Size Qty
Upper Wheel Assembly 1... JWBS16B-101...Saw Body... 1 2... TS-0152011...Carriage Bolt...5/16-18x1... 6 3... JWBS18-103...Upper Wheel Bracket... 2 4... TS-0680031...Flat Washer...5/16... 6 5... TS-0720081...Lock
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS
Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690060 Ph.: 800-274-6848 Revision G1 06/2015
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
Headstock Assembly 31
Headstock Assembly 31 Parts List: Headstock Assembly Index No. Part No. Description Size Qty 1... 6294736...Faceplate...3... 1 2... 6295796...Nyloc Insert Socket Set Screw...1/4-20x3/8... 4 3... 6294725...Spur
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A (GHB-1340A shown with optional stand 321443AK) For Parts List and Electrical Diagrams, see document M-321357A
Repair Parts. Parts List for RIDGID 10 Inch Table Saw Model No. TS Figure 1. RIDGID parts are available on-line at
Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure 0 0 0 0 See Figure 0 See Figure 0 See Figure Parts List for RIDGID 0 Inch Table Saw Model TS00 Figure Always Order by Part Number - not by Number
Operating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
SECTION 10: PARTS Body
-76- Model G0690/G0691 (Mfd. 6/15+) SECTION 10: PARTS 55V2 55-1 55-2 55-3V2 55-5 55-6 8 9 9 56 10 10 68 69 70 71 55-4 1 2 3 4 5 6 7 8 9 14 15 18 19 20 21 22 23 24 25 26 27 27 28 29 30 31 32 32 33 33 34
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH
Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-0460224 Ph.: 800-274-6848 Revision
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
414477T 400/50/3 PARTS LIST
MBS-1014W Metal Working Bandsaw 414477T 400/50/3 PARTS LIST Walter Meier (Fertigung) AG Bahnstrasse 24 8603 Schwerzenbach Switzerland Phone +41 44 806 47 48 Fax +41 44 806 47 58 jetinfo.eu@waltermeier.com
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
SECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
SECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
Parts List: Head Assembly
Head Assembly 23 Parts List: Head Assembly Index No. Part No. Description Size Qty 1...JWP15H-001... Head Casting......1 2...TS-1525021... Set Screw... M10x12...8...JWP15DX-CA... Cutter Head Assembly (Index
8" JOINTER Model 60B
8" JOINTER Model 60B Instruction Manual & Parts List M-0460282 (800) 274-6848 www.powermatic.com Machine will not start, 7. Motor failure. 7. Have motor tested. Repair or or repeatedly trips replace as
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET
RYOBI 0 in. (5 mm) COMPOUND MITER SAW MODEL NO. TS5 REPAIR SHEET FIGURE A 50 89 5 6 5 5 5 9 8 8 5 6 0 9 8 9 0 5 5 6 5 6 5 0 9 8 0 6 8 9 9 5 0 55 56 WARNING: Improper repair of a double insulated tool can
SECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
MODEL NO.: MI PARTS BREAKDOWN
MODEL NO.: MI-76350 PARTS BREAKDOWN MAGNUM DRILL PRESS ASSEMBLY INSTRUCTIONS MODEL MI-76350 Before you begin to assemble your drill press, review the parts breakdown and keep it ready for reference. Start
GEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
Symptom Possible Cause Correction. Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection.
Saw blade Blade guard Troubleshooting Symptom Possible Cause Correction Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection. Inspect all lead
Parts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
Parts Breakdown Page 1 of 13 2/13
Page 1 of 13 2/13 Page 2 of 13 2/13 Page 3 of 13 2/13 Page 4 of 13 2/13 Page 5 of 13 2/13 Page 6 of 13 2/13 Page 7 of 13 2/13 Products with multiple versions are listed in subsiding order with the newest
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
SECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
DAKE VERTICAL BAND SAW
DAKE VERTICAL BAND SAW Model V-26 E INSTRUCTION MANUAL V-26 shown Please record your saws information DAKE (Division of JSJ) 724 Robbins Road Grand Haven, Michigan 49417 616.842.7110 Phone 800-937-3253
SECTION 9: PARTS Headstock Case and Shift
SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709
MODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.
Table Parts List Index No. Part No. Description Size Qty
Table Parts List 1... TS-1521011...Socket Set Screw...M4x4... 3 2... JWS35X-102...Insert Ring (Small)... 1 3... TS-2285121...Flat Head Machine Screw...M5x12... 3 4... JWS35X-104...Insert Ring (Large)...
SECTION 11: PARTS Main
SECTION 11: PARTS Main 55 48 21 20 22 7 18 19 23 17 17 18 21 22 14 15 16 32 33 34 26 27 50 49 13 47 35 2 18 20 55A 12 11 8 10 45 46 3 38 37 44 53 36 51 42 25 30 29 28 43 99 103 98 100 52 101 5 4 58 57
SECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
11.0 Replacement parts
11.0 Replacement parts Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours,
SECTION 9: PARTS Lower Frame
SECTION 9: PARTS Lower Frame 47 39 5 5 4 1 3 6 7 6 1 9 13 4 3 48 2 19 1 17 1 18 1 15 16 11 14 6 1 8 12 11 1 13 2 6 1 10 27 25 30 22 23 26 31 33 32 24 26 34 25 28 29 35 31 36 32 37 40 42 41 21 20 43 38
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
SECTION 9: PARTS G0514X
SECTION 9: PARTS G0514X Main 48 23 24 21 55 17 19 22 24 50 49 3 22 26 17 21 15 14 16 13 46 47 10 32 7 38 33 3435 37 12 44 45 41 42 43 11 40 8 39 165 166 1 11-1 29 30 25 28 26 27 5 4 58 57 64 65 56 68 62
321840T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES
GH-1440W METALWORKING LATHE 321840T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0) 44
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
63601 PARTS LIST ILLUS NO. PART NO. DESCRIPTION QTY.
63601 PARTS LIST DRAWING NO. 1 1 W-A63601730 Right Cover 1 M-O63601150 Right Hand Insulation 1 2 W-A63601735 Left Cover 1 M-O63601149 Left Hand Insulation 1 3 M-S63601080 48XLO50 Belt 1 4 M-S63601081 Motor
Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
SECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
PARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
ELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
PARTS LIST MODEL: HDEJ1800
First Edition: June 0 PARTS LIST 0 8 4 8 8 4 8 0 KEY PARTS NO. NO. DESCRIPTION 0400 Top cover (unit) 00 Top cover (unit) 0000 Top cover 4 40A04 Flip-top sewing instruction panel 000 Hinge rod (right) 00
535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine -Manual Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 0 Cutter Assembly Stop Pin 0 Pin Reamer Assembly Carriage Assembly 0 Stop Screw
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
Parts Breakdown Page 1 of 12 2/13
Page 1 of 12 2/13 Page 2 of 12 2/13 Page 3 of 12 2/13 Page 4 of 12 2/13 Page 5 of 12 2/13 Page 6 of 12 2/13 Products with multiple versions are listed in subsiding order with the newest version on top