SUPRA ROAD BARRIER INSTRUCTIONS & WARNING FOR INSTALLATION, USE & MAINTENANCE

Size: px

Start display at page:

Download "SUPRA ROAD BARRIER INSTRUCTIONS & WARNING FOR INSTALLATION, USE & MAINTENANCE"

Stella Tyler
6 years ago
Views:

1 SUPR ROD RRIER SUPR ROD RRIER INSTRUCTIONS & WRNING FOR INSTLLTION, USE & MINTENNCE INSTRUCTIONS FOR USE ONLY FOR PROFESSIONL INSTLLER The installation must be performed only by a qualified professional installer, in compliance with safety regulation

2 LEFT STNDRD CONFIGURTION OPENING LIMIT SWITCH CLOSING LIMIT SWITCH ROWN GREEN WHITE GREEN 45

3 RIGHT STNDRD CONFIGURTION CLOSING LIMIT SWITCH OPENING LIMIT SWITCH ROWN GREEN WHITE GREEN 45

4 SOLE PLTE WITH FIXING RCKETS (SUE) STEP STEP STEP STEP 4 STEP Insert screws to sole plate, closing (with a spanner) the nuts below the sole plate & fixing the counterbolts on top, then grit on all 4 sides. See scheme. STEP Drown sole plate in cement, and let dry (use bubble measurement tool to ensure correct horizontal position), see STEP - RRIER DISMNTLING STEP 5 Turn key () to unlock barrier, & unscrew the side screws (), with a 4 size allen key see scheme. STEP 6 Take upper cover off (), and unscrew the screws () with an allen key. Remove front panel (). STEP 5 STEP 6 4

5 STEP STEP 7 Unscrew with an allen key the rear screws, remove vertical cover (5). See scheme 5 mm STEP 8 STEP 8 Insert the inside metallic structure (8) to the sole plate (7). Screw with a spanner the bolts located on the 4 sides of the structure, and grip with an adjustable spanner (8) see scheme. For a correct installation, ensure barrier horizontal position with a bubble measurement tool

6 SPRING INTERNL INSTLLTION (RIGHT OR LEFT) CLOSING TOWRDS LEFT C E F CLOSING TOWRDS RIGHT E C F 45 STEP 9. With the spring unloaded, hook upper part of tie to support () and screw bolt (C) with an adjustable spanner. fter this operation, hook the spring to the rod. To load or unload spring, turn tie (F) right or left with a screwdriver until appropriate configuration is reached. See scheme e Open door () insert key() & unlock with clock-wise rotations. See scheme. WRNING: THE RM MUST STY IN 45 POSITION WHEN UNLOCKED. 6

7 RM SET UP STEP 0 STEP Insert arm () to support (). See scheme. When arm inserted, bring the whole block to the barrier, & screw the fixing bracket () to the barrier body, see scheme 4 mm 5 STEP Screw the 4 screws of the vertical cover (4), & then insert round L.e.d cover (5). See scheme mm 5 0 7

8 RRIER LIMIT SWITCH DJUSTMENT STEP Unlock barrier and proceed with closing & opening linit switch adjustments as scheme. 0 e Lock arm, open door (), insert key () & unlock with clockwise rotations. See scheme 8

9 5 SPRE PRTS DETILS OF SUPR MOTOR 4 N CODE DESCRIPTION 5RI40000 SPRE PRT FRONT PNEL 5RI50000 SPRE PRT RER PNEL 5RI60000 SPRE PRT UPPER COVER 4 5RI70000 SPRE PRT VERTICL COVER 5 5RI80000 SPRE PRT ROUND L.E.D COVER 6 5RI SPRE PRT 0V 60va CPCITOR 7 5RI SPRE PRT RRIER MOTOR 8 5RI80000 SPRE PRT CHNNELLED RM CCESSORY 9 5RI8000 SPRE PRT NORML RM CCESSORY 0 5RI40000 SPRE PRT UNLOCK 5RI0000 SPRE PRT ENCODER 5RI0000 SPRE PRT CLING + MICRO + LEVERPR 5RI40000 SPRE PRT SECONDRY GERING 4 5RI50000 SPRE PRT PRIMRY GERING 5 5RI60000 SPRE PRT RM FIXING RCKET

10 CE PPROVL DECLRTION CONFORMITY DECLRTION ccording to 98/7/CE regulation, attachment II, part (manufacture CE Conformity declaration) LIFE home integration Via Sandro Pertini,/5 04 COLLE UMERTO (TV) Italia Hereby declares that the following product: utomation for barrier SUPR road barrier pplies to the essential requirements of the following regulations: Machine 98/7/CE (ex89/9/cee) & following amendments Low tension 7//CEE & following amendments Electromagnetic Compatibility 89/6/CEE & following amendments Is conformed as required by the following regulations EN 445:000 Industrial, commercial & warehouse gates & doors - Safety in motorised use Test methods EN 45: Industrial, commercial & warehouse gates & doors - Safety in motorised use Requirements EN 6004 :997 Machine safety Machine electrical equipment Part : general rules. Furthermore declares that set up of the above mentioned incorporated components is not allowed, until the installation is declared conform to regulation 98/7/CE. COLLE UMERTO Name of bearer: Michele Rui Qualified as: PRESIDENT Firma: 0

11 ddress: Via Sandro Pertini, /5-04 COLLE UMERTO(TV) Italia Telephone: Telefax: http info@homelife.it

Installation and Assembly - Articulating Swivel Double-Arm for 42" - 71" Plasma Screens

Installation and Assembly - Articulating Swivel Double-Arm for 42 - 71 Plasma Screens Installation and ssembly - rticulating Swivel Double-rm for 42" - 71" Plasma Screens Models: PLV 70, PLV 70-S R This product is UL Listed. It must be installed by a qualified professional installer. Maximum