AutoFIT Getting started
|
|
- Gervais Skinner
- 6 years ago
- Views:
Transcription
1 Getting started
2 Welcome to In this guide you will find out how you can set up to your needs. Take some time to explore the features of. This guide provides tips and instructions to help you learn the basics quickly. First things first Setting up : When we press the Settings button: we can give our correct settings:
3 Click on Materials / residual mat. Labelsl In the field Database / file you can enter the following line: \\ *\c:\Autofit\Database\adkorp.GDB *In some cases the IP-address of the computer or server is needed When the database is installed on a server, the server IP is necessary. (more info, see install guide) Press OK and you can now see your material list.
4 General settings Now we can setup the rest of! Click on On the tab Folders it is possible to change the default path for opening an -file or for importing a part-file. Selecting Materials / residual mat. Labelsl
5 Start values for new materials can be adjusted to your needs. When making a new material in the list enter a name for the material and the default start values will be added automatically. Pay attention: Do not use these caracters *. " / \ [ ] : ; =, Also when importing a part list and a material is missing in the material list it will ask if needs to add it to create it. If so, the default values will be added. Print When there is no labelprinter on the sawing machine, it is possible to create your own label. This will be neccesary for the Martin saw and the Gabbiani Wincut. Set Label print mode to Quick PDF. The advantages of this system is that there are no limits in what text you want to put on the label, place your own logo on the label, when using KORPUS or QuickNC it is even possible to show the final part on the label.
6 Click on Edit next to Part Lap-file and a new screen will appear: Page layout: Using a common printer you can give your page height, width, markings and the number of rows and colums. When using a labelprinter you can give the measurements of the label like shown in the picture above. On the right side of the screen you see a button where you can add text, barcode, drawing (only with Korpus) and pattern (edgebanding pattern). When adding a new item, choose a location on the label, the text size and font and the variable it needs to contain. Example:
7 By clicking on OK, will ask you if you want to write over the existing label-file. Click on Save as if you want to give a new name. The new name will appear in the droplist on the screen. If you use just for optimization and if you need only the cutting patterns, you can set up your own print layout. General settings: Select the default printer. Layout: How many cutting patterns do you wish on one page Document margins: space around your document Field margins: space between layouts (cutting patterns) when more then one Scale: autoscaling or a factor Orientation: Vertical (portrait) or horizontal (landscape)
8 Details settings: Overview You can select or deselect the chapters you want to print and adjust the fonts. Cutting patterns: Min. Space for cutting pattern = 50% indicates that if the parts list is longer then 50% of a page, the cutting pattern automatically starts on a new page.
9 Columns: Here you can select which columns you want on your print and also how much space it may be used for that column. (in percentage of the page width) General: Adjust the settings to your needs.
10 Materials: Select the settings you want to use and don't forget the columns. The rest of the chapters are with the same management of settings: Now you can print your optimized parts or export them to a PDF file.
11 Edgebanding methode For edgebanding handling there are three possibilities: Only glue the edgeband Cut away edgeband thickness and glue the edgeband Cut away a fixed thickness and then glue the edgeband will automatically recalculate the cutting patterns with these settings. If you already optimized parts and adjust these settings afterwards, you will need to optimise again. Additional band length per edge give you the possibility to add a certain length for each edged part. This will be calculated in the bill of materials.
12 Cutting patterns There you can change the view of your optimized boards. Part List Enter a target folder, a file name and enter the necessary elements you need in your bill of materials.
13 Example: Bill of material: [DOCUMENT NAME] Used materials: [MATERIAL LIST START] - [MATERIAL NAME] ([MATERIAL SIZE X] x [MATERIAL SIZE Y] x [MATERIAL THICKNESS]). #: [MATERIAL USED COUNT] [MATERIAL LIST END] Used edgeband: [COATING LIST START] - [COATING NAME] ([COATING WIDTH]). Length: [COATING USED LENGTH] mm [COATING LIST END] Automatic storage systems Options are Grundner and Bargstedt. Default elements are already filled in.
14 Columns Here you can change names of columns, make them visible or change the order. You can change this for different lists Hand storage system Hand storage is only possible with a barcodescanner programmed bij Vlecad.
15 Post If you have an with NC generator, you will see the list of saws where can create a NC file for. For some saws it is necessary to have a translator (Holzma needs Cadlink or Holzlink,...). (Please advice your machine dealer if this is necessary) For some saws a code is needed to unlock the ability to read the NC-files. (Biesse, Martin,...) (Please advice your machine dealer if this is necessary) All settings you need are placed in the help per postprocessor. There can be different versions of a type of postprocessor. If you are not sure which one to use, you can contact your dealer or Vlecad. You can activate 5 postprocessors of the same type of a machine at the same time. It is possible to select different postprocessors at a same time. On top of the screen you can select your default saw/machine. In the material list it is possible to select a saw per material. The machines that are in the list are available to use without any restrictions! Now we are ready to start working!!
16 Materials Colomns: Material, name of the material. Start typing in the empty square to add a new material. Try to avoid characters like: / \ + $, % Thickness, thickness of the material. Grain, grain direction of the material. A = No grain H = Horizontal grain (in length) V = Vertical grain (in width) Length, total board length of the material. Width, total board witdh of the material. Count, available boards. Reference, refence (ordernumber) of material. Edges Left, Right, Top, Bottom, clearance distance for optimizing. Reference number, automatically generated number for a material. Available to use, give priority to a certain material. Material type, Basic board or residual. Minimal stock, when board count is lower then minimal stock, a warning will show. Residual X and Y, everything smaller then this size is garbage, otherwise it is residual. When nothing is entered, will use the default settings. You can find these default settings on the left side: Configuration. Layered boards, define a material composed of other materials. (See further) Preference saw, select a saw prefered to saw this material. More columns possible...
17 Composing laminated materials Make a new material with a name and a thickness 20mm = 1mm + 18mm + 1mm Click in the square Layered materials and the following screen will appear: Create layered materials by selecting a base material and moving it to the right (-->) When done, click OK. In the material list it will now say Yes in the column of layered
18 Parts Columns: Materials: Select a material from the list. Thickness: This will be automatically selected. Grain: If the material has a grain, it must be H or V Length: Saw length (soon will be calculated automatically from L-edged) Width: Saw width (soon will be calculated automatically from W-edged) Count: Number of parts Edge top (Length) Edge left (Width) Part Edge right (Width) (Top view of part) Edge bottom (Length) L-edged: Length of part when edged, or finished W-edged: Width of part when edged, or finished Reference: Reference of part Remark: Remark for part CNC: NC-name of part for further production, can be used for barcode.
19 L-oversize: Add an additional length for production purpose W-oversize: Add an additional length for production purpose Group: Number that is been given by when composing a group of parts. Example of group: How to make a group: De parts may only come once in the list (count needs to be 1) If you want to group parts with count 2 or more, only one part will be visible. You can expand the list by doing the following: Select your row, right mouse click on the row and select expand row.
20 Result: Now you can select the rows / parts we need in your group. With the Ctrl key on the keyboard, you can select the row by row. Or it is possible to select all the rows by using the Shift key (Windows oriented) Click with the right mouse button on a row and select Create / modify group A new screen will appear: On the left you see the selected rows / parts by name and measurements. The * indicates of the part is already in your group or not. Select your part and move to the green square (material size L x W) Once the part selected it hangs on your cursor. Like this:
21 Select the top left corner to start your group. When the position is correct, click with left and select the next part. Click OK when ready. The group will be optimized as a unit. You can now select different rows / part if they need to be in a different group.
22 Configuration Enter a prefered maximal calculation time per material Default garbage size in X and Y, takes these settings if there are no other settings in the material list. Composed materials (Layered materials) Add overmeasure for external plies (measurement wil be added to all 4 sides) Same for internal plies Additional cutting patterns for composed materials gives you NC-programs per part for handling single composed parts.
23 Cutting patterns Summary: Summary of used materials. There is a button Modify materials list If you push this button, the base materials that are used will be subtracted and the residuals will be added. Cutting patterns:
24 Unused parts: Unused parts list up the parts not fitting in the given materials (to large, grain direction incorrect, not enough base boards) Labels: Preview of the labeling. Handholded warehouse This function will only work with a barcodescanner from Vlecad. Further instructions come with the installation. Edgeband materials In the menu, select Edit and then Edgebanding materials: Add a new material, give it a name, material name, thickness and color The color will be printed on the cutting patterns.
25 Language Change the language by click in the menu: Display then languages and then your language. needs to be restarted in order to change the language. Help In the menu help, you can find a function to update your SIM, contact your dealer or Vlecad for more information. Check here for available updates. In register data you can check if all your company data are filled in correct in the Windows registry. Remote assistance will open a teamviewer, call Vlecad to get assistance. If you have any more questions about, do not hesitate to contact your dealer or Vlecad.
1. Setup Output mode. 2. Using a Fixed tile size
Tutorial Tiling Software version: Asanti 2.0 Document version: June 23, 2015 This tutorial demonstrates how to use tiling with Asanti. Tiling can only be executed on a system where Acrobat Pro X or later
More informationTable of contents. Table of contents 2 Introduction 4 Overview 4
Tiling v1.2 TABLE OF CONTENTS Table of contents Table of contents 2 Introduction 4 Overview 4 Global setup 6 Poster size 6 Format 6 Width and Height 7 Margins 8 Frame 8 Scale 9 Tile setup 9 Tile size 10
More informationGEO/EVS 425/525 Unit 2 Composing a Map in Final Form
GEO/EVS 425/525 Unit 2 Composing a Map in Final Form The Map Composer is the main mechanism by which the final drafts of images are sent to the printer. Its use requires that images be readable within
More informationGetting Started. with Easy Blue Print
Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the
More information1. Setup Output mode. 2. Using a Fixed tile size
Tutorial Tiling Software version: Asanti 1.0 Document version: February 17, 2014 This tutorial demonstrates how to use tiling with Asanti. Tiling can only be executed on a system where Acrobat Pro X or
More informationTimekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring User Guide
Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring 2004 User Guide Team 2 Edward Bangs Bryan Berry Chris Damour Kim Monteith Jonathan Szostak 1 Table of
More informationTechnical Note. How to Use the Image Studio Software Western and MPX Western Analyses. Developed for: Image Studio Software
Technical Note How to Use the Image Studio Software Western and MPX Western Analyses Developed for: Image Studio Software Please refer to your manual to confirm that this protocol is appropriate for the
More informationQuick Printing Guide (for Microsoft Word 2010)
Quick Printing Guide (for Microsoft Word 2010) M00089500 Rev.A Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision is registered trademark or trademark of Seiko Epson
More information12. Creating a Product Mockup in Perspective
12. Creating a Product Mockup in Perspective Lesson overview In this lesson, you ll learn how to do the following: Understand perspective drawing. Use grid presets. Adjust the perspective grid. Draw and
More informationARCHICAD Introduction Tutorial
Starting a New Project ARCHICAD Introduction Tutorial 1. Double-click the Archicad Icon from the desktop 2. Click on the Grey Warning/Information box when it appears on the screen. 3. Click on the Create
More informationTiling. 1. Overlapping tiles with fixed number of tiles. Tutorial
Tutorial Tiling Software version: Asanti 3.0 Document version: April 3, 2017 This tutorial demonstrates how to use tiling within Asanti. Download the Asanti Sample Files via the Asanti Client (Help > Asanti
More informationThe Toolbars submenu selects or deselects the following toolbars, below shows you how to display the Measuring Toolbar: Scale X in Y
The Measurement Toolbars Menu The Toolbars submenu selects or deselects the following toolbars, below shows you how to display the Measuring Toolbar: As it looks on the tool bar, below Arrow End Style
More informationG e t t i n g S t a r t e d G u i d e. ID Card Managers. Getting Started Guide. 1 P a g e
G e t t i n g S t a r t e d G u i d e ID Card Managers Getting Started Guide 1 P a g e G e t t i n g S t a r t e d G u i d e P a g e 2 Contents ID Cards: Getting Started... 3 Why manage photo ID Cards
More informationGEO/EVS 425/525 Unit 3 Composite Images and The ERDAS Imagine Map Composer
GEO/EVS 425/525 Unit 3 Composite Images and The ERDAS Imagine Map Composer This unit involves two parts, both of which will enable you to present data more clearly than you might have thought possible.
More informationCOURSE UNIT 3. Plan Creation. Messerli EliteCAD Version
Messerli EliteCAD Version 13 27.09.2013 COURSE UNIT 3 Plan Creation Switzerland: Austria: Germany: Messerli Informatik AG Messerli Informatik GmbH Messerli Informatik GmbH Pfadackerstrasse 6 Hamoderstraße
More informationQuick Printing Guide (for BarTender )
Quick Printing Guide (for BarTender ) M00087100 Rev.A Trademarks EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision is registered trademark or trademark of Seiko Epson Corporation.
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationPRODIM CT 3.0 MANUAL the complete solution
PRODIM CT 3.0 MANUAL the complete solution We measure it all! General information Copyright All rights reserved. Apart from the legally laid down exceptions, no part of this publication may be reproduced,
More information3. Ready-to-Make Projects
3. Ready-to-Make Projects Ready-to-Make projects overview Cricut Design Space features ready-to-make projects created by professional artists. These projects include everything from home décor to fashion
More informationLearning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:
Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationImporting and processing gel images
BioNumerics Tutorial: Importing and processing gel images 1 Aim Comprehensive tools for the processing of electrophoresis fingerprints, both from slab gels and capillary sequencers are incorporated into
More informationRhinoceros modeling tools for designers. Using Layouts in Rhino 5
Rhinoceros modeling tools for designers Using Layouts in Rhino 5 RH50-TM-LAY-Apr-2014 Rhinoceros v5.0, Layouts, Training Manual Revised April 8, 2014, Mary Fugier mary@mcneel.com Q&A April 8, 2014, Lambertus
More informationGo Daddy Online Photo Filer
Getting Started and User Guide Discover an easier way to share, print and manage your photos online! Online Photo Filer gives you an online photo album site for sharing photos, as well as easy-to-use editing
More informationPASS Sample Size Software. These options specify the characteristics of the lines, labels, and tick marks along the X and Y axes.
Chapter 940 Introduction This section describes the options that are available for the appearance of a scatter plot. A set of all these options can be stored as a template file which can be retrieved later.
More informationBacklightFly Manual.
BacklightFly Manual http://www.febees.com/ Contents Start... 3 Installation... 3 Registration... 7 BacklightFly 1-2-3... 9 Overview... 10 Layers... 14 Layer Container... 14 Layer... 16 Density and Design
More informationIDEA Corbel 8. User guide. IDEA Corbel User Guide
IDEA Corbel User Guide IDEA Corbel 8 User guide IDEA Corbel User Guide Content 1.1 Program requirements... 3 1.2 Installation guidelines... 3 2 Basic Terms... 4 3 User interface... 5 3.1 Control of view
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationOutput a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout.
Printing Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Originally, people printed text from printers and plotted drawings from plotters.
More informationminicad5 QuickStart Tutorial Stage: 4 Plot the Job
minicad5 QuickStart Tutorial Stage: 4 Plot the Job Aim: Plot the job to both printer / plotter and DXF file. Figure 1 - The finished product Plotting and export to DXF We wish to produce a final paper
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationHP DesignJet T520. Quick Start Guide. Copyright Notice
HP DesignJet T520 Quick Start Guide Copyright Notice The copyright law of the United States (Title 17, U.S. Code) governs the making of copies or other reproductions of copyrighted material. The person
More informationimos Getting Started
imos 12.0 - Getting Started June 2015 imos Aktiengesellschaft Planckstraße 24 D-32052 Herford Tel. +49(0)5221.976-0 Fax +49(0)5221.976-123 info@imos3d.com www.imos3d.com This document is provided just
More informationOPERATION MANUAL MIMAKI ENGINEERING CO., LTD.
OPERATION MANUAL MIMAKI ENGINEERING CO., LTD. http://www.mimaki.co.jp/ E-mail:traiding@mimaki.co.jp D200674 About FineCut for CorelDRAW Thank you very much for purchasing a product of Mimaki. FineCut,
More informationYou can easily print images using the Capture NX print function. Here we will explain the process for printing
Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing
More informationWorking With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
More informationDeltaCad and Your Horizontal Altitude Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Horizontal Altitude Sundial we went through the process of designing a horizontal altitude sundial with SONNE and saving it as a dxf
More informationPosterArtist Quick Guide
PosterArtist Quick Guide Create posters in four easy steps STEP STEP STEP STEP Use Auto Design to Create Posters Simply select a poster type and a design image to automatically create high-quality posters.
More informationInventor Modeling Procedure By: Eric Small January 18, 2011
This document will out line the steps and procedures involved using Inventor to create Assemblies, Weldments, individual Parts, and Drawings. In order to outline the specific step to be taken, an understanding
More informationMirage 2.0. What's new in Mirage 2.0? din.a.x Digitale Bildbearbeitung GmbH Fuggerstrasse 9a D Neuss
What's new in Mirage 2.0? 1. Adjust the quality of the preview image 2. New user-defined labels 3. Ink level display and printer status messages 4. New "Tiling" menu item 5. Split screen page preview 6.
More informationMaterials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
More informationPrasanth. Lathe Machining
Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning
More informationYou are not allowed to connect any laptop or computer to the printers other than the pc s provided
Printing pictures from Lightroom Before you start: Do not eat or drink in the printing room You are not allowed to connect any laptop or computer to the printers other than the pc s provided Please do
More information1. Reference Guide and Glossary
1. Reference Guide and Glossary Design Panel New Click the New Icon at any time to create a new project from scratch. Projects Browse, select, and cut projects from the Projects Tab. This includes your
More informationExcel Lab 2: Plots of Data Sets
Excel Lab 2: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationPrinter Driver. This guide describes how to set up the Printer Driver for Windows 7.
4-187-187-12 (1) Printer Driver Setup Guide This guide describes how to set up the Printer Driver for Windows 7. Before Using this Software Before using the printer driver, be sure to read the Readme file.
More informationAreaSketch Pro Overview for ClickForms Users
AreaSketch Pro Overview for ClickForms Users Designed for Real Property Specialist Designed specifically for field professionals required to draw an accurate sketch and calculate the area and perimeter
More informationChief Architect X3 Training Series. Layers and Layer Sets
Chief Architect X3 Training Series Layers and Layer Sets Save time while creating more detailed plans Why do you need Layers? Setting up Layer Lets Adding items to layers Layers and Layout Pages Layer
More informationTry what you learned (and some new things too)
Training Try what you learned (and some new things too) PART ONE: DO SOME MATH Exercise 1: Type some simple formulas to add, subtract, multiply, and divide. 1. Click in cell A1. First you ll add two numbers.
More informationPhysical Inventory System User Manual. Version 19
Physical Inventory System User Manual Version 19 0 Physical Inventory System User Manual 1 Table of Contents 1. Prepare for Physical Inventory... 2. Chapter 1: Starting Inventory... 2.1. CDK/ADP... 3.
More informationCreo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
More informationCertified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
More information7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS
7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS Material required: Acrylic, 9 by 9 by ¼ Difficulty Level: Advanced Engraving wood (or painted metal) pens is a task particularly well suited for laser engraving.
More information33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof
33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof A RoofLogic Digitizer license upgrades RoofCAD so that you have the ability to digitize paper plans, electronic plans and
More informationExcel Tool: Plots of Data Sets
Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationHouse Design Tutorial
Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created
More informationProgeny Imaging Veterinary
Progeny Imaging Veterinary User Guide V1.14 and higher 00-02-1605 Rev. K1 ECN: ECO052875 Revision Date: 5/17/2017 Contents 1. About This Manual... 6 How to Use this Guide... 6 Text Conventions... 6 Getting
More informationStep 1: Open A Photo To Place Inside Your Text
Place A Photo Or Image In Text In Photoshop In this Photoshop tutorial, we re going to learn how to place a photo or image inside text, a very popular thing to do in Photoshop, and also a very easy thing
More informationENGINEERING CO., LTD.
Software RIP RasterLinkPro5 IP Reference Guide For UJF Series For JF Series For JFX Series This guide explains about features of RasterLinkPro5 IP for the UV Inkjet printer UJF Series, JF Series and JFX
More informationVersion 14 COURSE UNIT 5. Work Drawings
Version 14 COURSE UNIT 5 Work Drawings Table of Contents Introduction... 2 Preparation... 3 Switch representation mode... 5 Parameter representation mode... 7 Change imaging depth... 10 Modify external
More informationDrawing Layouts Paper space & Model Space
Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they
More informationImage resizing with Microsoft Office Picture Manager
Marketing Services and Web Management Digital Marketing Image resizing with Microsoft Office Picture Manager Document Owner Adam Seeley Last update Monday, 3 February 2014 Status Final Version 2.0 Circulation
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationMagic Contest, version 4.5.1
This document contains specific information about - the follow-up to the popular Bridgemate Pro. The general handling is the same, so you need to read the Magic Bridgemate documentation to understand the
More informationMaterials Tutorial. Setting Materials Defaults
Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material quantities will also be calculated in
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationHeredis may assign any number of information sources to each event.
Sources Sources Heredis may assign any number of information sources to each event. Each source is an independent element, which is then assigned to one or more events. Heredis allows you the flexibility
More informationKey Terms. Where is it Located Start > All Programs > Adobe Design Premium CS5> Adobe Photoshop CS5. Description
Adobe Adobe Creative Suite (CS) is collection of video editing, graphic design, and web developing applications made by Adobe Systems. It includes Photoshop, InDesign, and Acrobat among other programs.
More informationComputation & Construction Lab. Stinger CNC 3D Milling Workflow
Computation & Construction Lab Stinger CNC 3D Milling Workflow 3D Single Sided Milling Guidelines - The following steps will guide the user on how to transfer digital work from a design software to setting
More informationCreating Photo Borders With Photoshop Brushes
Creating Photo Borders With Photoshop Brushes Written by Steve Patterson. In this Photoshop photo effects tutorial, we ll learn how to create interesting photo border effects using Photoshop s brushes.
More informationWALLY ROTARY ENCODER. USER MANUAL v. 1.0
WALLY ROTARY ENCODER USER MANUAL v. 1.0 1.MEASUREMENTS ANGULAR POSITIONING a. General Description The angular positioning measurements are performed with the use of the Wally rotary encoder. This measurement
More informationOffice 2016 Excel Basics 16 Video/Class Project #28 Excel Basics 16: Mixed Cell References in Formulas & Functions to Save Time
Office 2016 Excel Basics 16 Video/Class Project #28 Excel Basics 16: Mixed Cell References in Formulas & Functions to Save Time Goal in video # 16: Learn how to use Mixed Cell References in Excel Formulas.
More informationStep 1: Set up the variables AB Design. Use the top cells to label the variables that will be displayed on the X and Y axes of the graph
Step 1: Set up the variables AB Design Use the top cells to label the variables that will be displayed on the X and Y axes of the graph Step 1: Set up the variables X axis for AB Design Enter X axis label
More informationACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
More informationImaging Features Available in HTML5. it just makes sense
Imaging Features Available in HTML5 it just makes sense August, 2018 Imaging Features Available in HTML5 As part of the 5.2 SP1 release, the Images functionality is now available in HTML5 and provides
More informationChapter 6: TVA MR and Cardiac Function
Chapter 6 Cardiac MR Introduction Chapter 6: TVA MR and Cardiac Function The Time-Volume Analysis (TVA) optional module calculates time-dependent behavior of volumes in multi-phase studies from MR. An
More informationCreating a Color Compensation file for Roche LightCycler 480 vers.i & vers. II
Creating a Color Compensation file for Roche LightCycler 480 vers.i & vers. II Due to ROX and Cy5 dye emmision spectra overlap Roche LightCycler 480 can pick up signals from a dye measured by another channel.
More informationFILE ASSEMBLY GUIDE. ~ File Assembly Guidelines ~
To reduce your costs in prepress and turn-around time for proofs, Standard Printing Company recommends using the following information as a guide for correct file assembly: Acceptable File Formats QuarkXpress
More informationNEORSD. Cad Standards and Procedures Manual
NEORSD Cad Standards and Procedures Manual This Manual is being provided to you on loan from the NEOSRD and is the property of the NEOSRD. Periodic updates will be provided and you are responsible for
More informationTECHNOTravel. For Microsoft Word & PowerPoint 2010 Student Workbook. TECHNOeBooks Project-based Computer Curriculum ebooks.
TECHNOTravel For Microsoft Word & PowerPoint 2010 Student Workbook TECHNOeBooks Project-based Computer Curriculum ebooks www.bepublishing.com Copyright 1993 2010. TechnoKids Inc. in partnership with B.E.
More informationWe recommend downloading the latest core installer for our software from our website. This can be found at:
Dusk Getting Started Installing the Software We recommend downloading the latest core installer for our software from our website. This can be found at: https://www.atik-cameras.com/downloads/ Locate and
More informationMaterials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
More informationMRI Grid. The MRI Grid is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board.
Abstract The is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board. Illustration 2: A grid on a binary image. Illustration 1: The interface
More informationSensors and Scatterplots Activity Excel Worksheet
Name: Date: Sensors and Scatterplots Activity Excel Worksheet Directions Using our class datasheets, we will analyze additional scatterplots, using Microsoft Excel to make those plots. To get started,
More informationAutoCAD Line Types If AutoCAD linetypes are disabled during configuration, Slick! will only plot/print straight lines!
Print / Plot To print the contents of the graphics window, select File? Print/Plot from the menu bar. Slick! can print or plot directly to the Windows printer or plotter. In this discussion, the term printing
More informationNesting Optimiser Datasheet NE
Nesting Optimiser Datasheet NE A powerful tool for nested based manufacturing Where parts are cut (and machined) at a Machining centre Nesting based optimisation is required. This handles both rectangular
More informationSETTING UP YOUR PAGE LAYOUT:
In this workshop we will look at: Setting up your drawing sheet Viewports Printing your work Once you ve drawn your work in the Model space and you re ready to print, you need to set up your Drawing Sheet
More informationUser Guide. Version 1.2. Copyright Favor Software. Revised:
User Guide Version 1.2 Copyright 2009-2010 Favor Software Revised: 2010.05.18 Table of Contents Introduction...4 Installation on Windows...5 Installation on Macintosh...6 Registering Intwined Pattern Studio...7
More informationCHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise
CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise (1 point) (Also see appendix II: Summary for making spreadsheets and graphs with Excel.) You will use spreadsheets to analyze data
More informationUser Guide. Version 1.4. Copyright Favor Software. Revised:
User Guide Version 1.4 Copyright 2009-2012 Favor Software Revised: 2012.02.06 Table of Contents Introduction... 4 Installation on Windows... 5 Installation on Macintosh... 6 Registering Intwined Pattern
More informationCopyright 2011 by Publish It! Online All rights reserved. Published by Family Literacy Press MSVU, Halifax, Nova Scotia.
1 Copyright 2011 by Publish It! Online All rights reserved. Published by Family Literacy Press MSVU, Halifax, Nova Scotia. No part of this publication can be reproduced in any form without written permission
More informationFrom the home screen, navigate to:
A4 LTR LGL LTR A4 LGL Quick Reference Loading paper and specialty media This section explains how to load the 550-sheet tray, an optional,000-sheet tray, a multipurpose feeder, and an optional 550-sheet
More informationTIPS ON ARIANE ( as of now the current release is Ariane V2.: see p 30 but the V1 tips were kept p1-p29 )
Copyright Claude HOCHET 2012 revised for the V2 2012 Feb 20th Page 1 sur 37 TIPS ON ARIANE ( as of now the current release is Ariane V2.: see p 30 but the V1 tips were kept p1-p29 ) What knots can be planed
More informationFMJD Draughts Arbiter Pro page 1
FMJD Draughts Arbiter Pro page 1 Part A starting the use of the program 1. How do you get a licence and download and install the program: a. Get a licence Click on the Draughts Arbiter logo on the FMJD
More informationToothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
More informationUser Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
More informationImagesPlus Basic Interface Operation
ImagesPlus Basic Interface Operation The basic interface operation menu options are located on the File, View, Open Images, Open Operators, and Help main menus. File Menu New The New command creates a
More informationBack up your data regularly to protect against loss due to power failure, disk damage, or other mishaps. This is very important!
Overview StatTrak for Soccer is a soccer statistics management system for league, tournament, and individual teams. Keeps records for up to 100 teams per directory (99 players per team). Tracks team and
More information