E27 LAMPHOLDERS 80S/T180/BI/M/PDE/E27 81S/T180/BI/M/PDE/E27 82S/T180/BI/M/PDE/E27 83F/T210/BI/M/PDE/E27. E27 one-piece lampholder. Outer shell: plain
|
|
|
- Eric Williams
- 6 years ago
- Views:
Transcription
1 E27 one-piece thermoplastic lampholder and accessories Rated current: 4A Rated voltage: 250V Rated temperature: T180 - T210 Overvoltage category:ii Material: thermoplastic Other colours on request Approval: Finitura cavo Outer shell: plain Connection: through holes for M4 screws or with snap-on domes T180 T210 code black code white code black code white code gold 80S/T180/BI/M/PDE/E27 Outer shell: threaded Connection: through holes for M4 screws or with snap-on domes T180 T210 code black code white code black code white code gold 81S/T180/BI/M/PDE/E27 Outer shell: partly threaded Connection: through holes for M4 screws or with snap-on domes T180 T210 code black code white code black code white code gold 82S/T180/BI/M/PDE/E27 cables mm 2 Outer shell: short threaded Connection: through holes for M4 screws or with snap-on domes T210 code black code natural 83F/T210/BI/M/PDE/E27 57
2 cables mm 2 Outer shell: plain Connection: metal bracket with M4 threaded hole with earth screw T210 code natural 83L/SQ16F/VT/T210/NA/M/PDE/E27 cables mm 2 Outer shell: short threaded Connection: metal spring bracket for mm thick lamp base (see drawing for slot pattern) T210 code black code black with earth terminal 83A/T210/SQ24/A-24/B/NE/M/PDE/E27 with spring bracket Connection: snap-on type (see drawing for slot pattern) Lamp base thickness: mm T210 code natural 84/T210/NA/M/PDE/E27 with spring bracket Connection: snap-on type (see drawing for slot pattern) Lamp base thickness: mm T210 code natural 84SP/T210/NA/M/PDE/E27 with spring bracket Connection: snap-on type (see drawing for slot pattern) Lamp base thickness: mm T210 code natural 84M/T210/NA/M/PDE/E27 58
3 with spring bracket Connection: snap-on type (see drawing for slot pattern) Lamp base thickness: mm T210 code natural 84SPM/T210/NA/M/PDE/E27 with spring bracket Outer shell: short threaded Connection: for specific uses T210 code natural 85/T210/NA/M/PDE/E27 with bracket Connection: M4 screws T210 code natural 86/T210/NA/M/PDE/E27 with bracket Connection: self-threading screws T210 code natural 86A/T210/NA/M/PDE/E27 with bracket Connection: M4 screws T210 code natural 86M/T210/NA/M/PDE/E27 59
4 with bracket Connection: self-threading screws Ø3.2 mm T210 code natural 86AM/T210/NA/M/PDE/E27 with bracket Connection: M4 screws T210 code natural 87/T210/NA/M/PDE/E27 with bracket Connection: self-threading screws T210 code natural 87A/T210/NA/M/PDE/E27 with bracket Connection: M4 screws T210 code natural 87M/T210/NA/M/PDE/E27 with bracket Connection: self-threading screws Ø3.2 mm T210 code natural 87AM/T210/NA/M/PDE/E27 60
5 Connection: slide-on for a specially shaped T210 code natural 911/T210/NA/M/PDE/E27 Connection: slide-on for a specially shaped T210 code natural 911A/T210/NA/M/PDE/E27 Support dome E27 for one-piece lampholder Item 911 Connection: one or two self-threading screws ø 3.5 mm (see drawing for drilling pattern) code natural CAPPELLO E27 ART. 104 Connection: through holes for M4 screws T210 code natural 912/T210/NA/M/PDE/E27 cables mm 2 Connection: metal bracket with M4 threaded hole T210 code naturals with earth screw 912/SQ16F/VT/T210/M/PDE/E27 61
6 With dome Connection: through dome s hook Packaging: 500 pz. T210 Code black 912/CP102/NE/M/T210/PDE/E27 With dome and extension lead cables mmç Fissaggio: with extension lead s hook Packaging: 500 pz. T210 Code black 912/CP102/PROLUNGA/NE/M/T210/P DE/E27 Dome for For first instillation Packaging: 500 pz. Code black Code white COPERTURA ART.102 NE X PDE PRIMA INSTALLAZIONE Extension lead for For first instillation Packaging: 500 pz. Code black PROLUNGA NE X PDE PRIMA INSTALLAZIONE Connection: through holes for M4 screws code /T210/NA/M/PDE/E27 62
7 Connection: metal bracket with M4 threaded hole T210 code natural with earth screw 914/SQ16F/VT/T210/M/PDE/E27 Use: with series 101 snap-on domes (see page 83) code CP/T210/NA/M/PDE/E27 Dome for Connection: with oval hole (10.5 x 9 mm) code white CAPPELLO E27 ART. 100 AR Dome for Connection: with Ø 10.5 mm hole Locking device notch: internal and external code black code white CAPPELLO E27 ART. 100 AS ORO Dome for Connection: threaded entry (M10x1) with retainer Locking device notch: external code black code white code gold CAPPELLO E27 ART. 100 ASF 63
8 . E27 LAMPHOLDERS Dome for with built-in cord grip for flat cables H03VVH2-F 2x0.75 mm 2 Connection: threaded entry (M10x1) with retainer Locking device notch: external code black code white code gold CAPPELLO E27 ART.100 ASF/NPSC Dome for Connection: threaded entry (M10x1) with retainer and stem locking screw Locking device notch: external code black code white code gold CAPPELLO E27 ART. 100 ASFV Dome for Connection: with Ø 10.5 mm hole Locking device notch: pass-through code black code white code gold CAPPELLO E27 ART. 100 ASS ORO Dome for Connection: threaded stem (M10x1) and anti-rotating device for porcelain lamp bases code black code white code gold CAPPELLO E27 ART. 100 BP 4 9 Dome for Connection: threaded stem (M10x1) for porcelain lamp bases code black code white code gold CAPPELLO E27 ART. 100 BPS 64
9 . E27 LAMPHOLDERS Extended dome for Connection: threaded stem (M10x1) and anti-rotating device for porcelain lamp bases h 20 mm code black code white code gold h 25 mm code black code white code gold h 35 mm code black code white code gold CAPPELLO E27 ART. 100 BP Extended dome for Connection: threaded stem (M10x1) for porcelain lamp bases h 20 mm code black code white code gold h 25 mm code black code white code gold h 35 mm code black code white code gold CAPPELLO E27 ART. 100 BP20S NERO Dome for Connection: with metal nipple (M10x1) and stem locking screw code black code white code gold CAPPELLO E27 ART. 100 NIP Dome for with built-in cord grip for flat cables H03VVH2-F 2x0.75 mm 2 Connection: with metal nipple (M10x1) and stem locking screw code black code white code gold CAPPELLO E27 ART.100 NIP/NPSC Dome for Connection: with metal nipple (M10x1), stem locking screw and earth terminal code black code white code gold CAPPELLO E27 ART. 100 T 65
10 Dome for Use: with hole for cord grips (code and code ) code black code white code gold CAPPELLO E27 ART. 100 SC Dome for Use: on a wood lamp base, for flat cables H03VVH2-F 2x0.75 mm 2 with cod grips (023964) Packaging: 500 pezzi code black code white code gold CAPPELLO E27 ART.100 BL Dome for (84, 86 and 87 series, 83 with sq16vt, 912, 914) Connection: snap-on type cod CAPPELLO E27 ART. 103 Dome for (84, 86 and 87 series, 83 with sq16vt, 912, 914) Use: with a suitable rubber sleeve (supplied separately on demand) Connection: snap-on type code dome CAPPELLO E27 ART. 103F code rubber sleeve TUBO GOMMA TGM85 Dome for Connection: snap-on type (see drawing for drilling pattern) on template with thickness mm code CAPPELLO E27 ART.102 TSC BEIGE 66
11 Dome for Item 81S with built-in cord grip for round cables H03VV-F 2x0.75 mm 2 code black code white code gold CAPPELLO E27 ART.100 G SC BI Shade ring for E27 lampholder Height: 9 mm Diameter: 47 mm code black code white code gold GHIERA E27 ART. 272 ORO Shade ring for E27 lampholder Height: 12 mm Diameter: 57 mm code black code white code gold GHIERA E27 ART. 273 Closed cord grip/insulator for E27 one-piece lampholder* Use: class II applications with flat cables H03VVH2-F 2x0.75 mm 2 to use with threaded metal stem Ø mm hole code SDI27 SERRACAVO ISOLATORE Approval: * See cord grips applications on page 194 Closed cord grip/insulator for E27 one-piece lampholder* Specific for increased tube from Ø mm Use: class II applications with flat cables H03VVH2-F 2x0.75 mm 2 code SDI27/1 SERRACAVO ISOLATORE Approval: 67
12 Closed cord grip/insulator for E27 one-piece lampholder* Use: class II applications with round cables H03VV-F 2x0.75 mm 2 to use with threaded metal stem Ø mm hole code SDIR27 NAT SERRAC. INTERNO CAVO TONDO Approval: Cord grip for Use: for flat cables H03VV-F 2x0.75 mm2 to use with dome Art. 100 ASF-ASFV-NIP code NPSC 27 PINZA SERRACAVO NATURALE Locking nut for BP series domes (see pp ) Packaging: 5000 pieces code black code white DAF-1 DADO AUTOFRENANTE * See cord grips applications on page
1.4 Section LAMPHOLDERS AND INLINE SWITCHES. Design. Scame by VLM
LAMPHOLDERS AND INLINE SWITCHES Design The most important component in our projects isn t the new CAD-CAM technology - it s the human element! Scame by VLM 60 61 LAMPHOLDERS AND INLINE SWITCHES GENERAL
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
F l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
Footprint Mobile Assembly Instructions
Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball
Assembly Instructions Above Worksurface Riser Shelf Systems and Back / End Stops
Assembly Instructions Above Riser Shelf Systems and Back / End Stops Back Stops and End Stops Adjustable Riser Shelves Instrument Riser Shelves Stationary Riser Shelves IMPORTANT PLEASE READ THESE INSTRUCTIONS
Assembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
Move System Swivel Caster Installation ( )
Move System Swivel Caster Installation (002-10265-00) Caution Always disconnect power to chair before removing covers or performing any service procedures. Step 1: Remove Top Cover A) Position chair to
LCD LIFT Flat Panel Display System Installation Manual. Table of Contents
LCD LIFT Flat Panel Display System Installation Manual Table of Contents Page Installation Overview... 2 Trim Ring Installation... 3 LCD Lift Installation....4 Actuator Switch Installation.5 Top Plate
IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the
PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding
MONEX40 EXTRUDED ALUMINIUM ASSEMBLY SYSTEM. MONK Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX
MONEX EXTRUDED ALUMINIUM ASSEMBLY SYSTEM Conveyors Limited Unit 9 The Christy Estate Ivy Road Aldershot Hampshire GU12 4TX Tel:01252 369800 Fax:01252 369801 Email: sales@monk-conveyors.co.uk Made in England
TABLE OF CONTENTS REQUIRED TOOLS
TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS
IMPULSE G2/PULSE STATIC BRIDGE & RETURN MODULE. Drill. Desk Connecting. Outside by fastening the supplied wood screws from the HK-67 kit through the
PART # 1608990 STATIC BRIDGE & RETURN MODULE 1. This sheet covers the steps to install a static bridge or return module with the FX no hinged access panel back option to a height adjustable freestanding
Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981
Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to
Test Joints / Fixed Earthing Terminals
Test Joints / Fixed Earthing Terminals Partially isolated lead-in earthing rod Test joint with disconnecting sleeve Fixed earthing terminal with ring equipotential bonding 131 Disconnecting Sleeves FIXED
EPPA2-KIT DUAL MONITOR ARM CONVERSION
EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
Material Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
Mounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
CONCEALED ROD CRASH BAR PR-7085 SERIES EXIT DEVICE ASSEMBLY DETAILS PR mm. 10mm. Lock cylinder. 10mm. Cross bar length (see note #8) Dogging
Floor line TITLE ASSEMLY DETAILS PR-7085 4:02 Hinge stile (inside) Lock stile (inside) Lock stile (outside) Drill 5mm (.20) and tap 1/4-20 (2) Drill 7mm (.266) holes (2) 9mm 12mm See note #6 160mm 9.5mm
Assembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
caroma marc newson shower mixer
caroma marc newson shower mixer PLUMBERS INSTALLATION INSTRUCTIONS IS1215A(07/12) Important Information Brazed connections should NOT be made directly onto the mixer, as excessive heat will cause permanent
It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating loose.
Installation instructions for FC12 Forward Controls for Kawasaki Vulcan 750 It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating
A500 ASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS 1 CONTENTS 2 Component Parts A B Canopy Mounting Plate C Cap (3) D Threaded Nipple E Threaded Standoffs (2) F Anchors (8) G #10 Screws (8) H Safety Cable (2) I Safety
Contacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
INSTALLATION INSTRUCTIONS Accessory MOTORCYCLE BED P/N 08L26-SJC-100A Application 2011 RIDGELINE Publications No. AII 43440 Issue Date JUNE 2010 PARTS LIST Left tube 6 Hex bolts Right tube (with label)
ASSEMBLY AND ADJUSTMENT
EPPA MONITOR ARM EPPA Rev A 10/17 Model EPPA-XXX ASSEMBLY AND ADJUSTMENT EPPA MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment procedures. Check
Spring Loaded All Season Roll-Up Doors
Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately
Dublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
J-BOX. 3-O or 4-0 MUD RING J-BOX BRACKET BAR CABLE GRIPPER/ CANOPY MOUNTING STUD 8-32 BRACKET BAR SCREWS CANOPY STRAIN RELIEF POWER CORD CANOPY
KELSEY - CSS Cable Suspended Rotational and Static CSS - Cable Suspended 3-O or 4-0 MUD RING BRACKET BAR 1/4-20 STUD 8-32 BRACKET BAR SCREWS STRAIN RELIEF POWER CORD MOUNTING GRIPPER AIRCRAFT CABLE CABLE
OPERATOR ADAPTER A21ABVA
OPERATOR ADAPTER A21ABVA Installation Instructions for Allen-Bradley Bulletin 1494V (variable depth), 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
Installation and Operating Instructions
Man.rev...0 Installation and Operating Instructions Contents : TECHNICAL DATA OPERATION, CONSTRUCTION AND PARTS LIST DIMENSIONS MOUNTING PROTECTION KITS. SPECIAL INSTRUCTIONS FOR THE SAFE USE DOCUMENTS
Hangers. Vertical Flange. Hangers BF3 For S" Hooks, 100 Bolting Straps and Wrap Wire
Suspend wire, or plain and threaded rod from vertical flanges. Fits vertical flanges 1 /16" to 1 /4" thick. Static Load Capacity: 160 Lbs. Vertical Flange 78101104270 BF3 For S" Hooks, Bolting Straps and
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
Flush Mount Bezel Kit
#15 13511 Crestwood Place Richmond BC Canada V6V 2G1 Tel: 604-207-1600 Fax: 604-207-8008 www.comnavmarine.com Flush Mount Bezel Kit for Admiral P3, Commander P2/P2VS and Navigator G2 Heads Installation
Installation Instructions for the AlphaDeck Staging System
Installation Instructions for the AlphaDeck Staging System Step 1 - Preparation A. Before setting up your system, determine the location where the stage will be installed and locate all the parts you will
NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TM X-10 Type 1F HIGH SECURITY ELECTRONIC LOCK Table of Contents Introduction... 1 Basic Tools and Materials Needed... 1 Lock Parts for Installation... 1 Installation Kit Contents...
INSTALLATION INSTRUCTIONS Accessory MOTORCYCLE BED P/N 08L26-SJC-100A Application 2010 RIDGELINE Publications No. AII 42145 Issue Date AUG 2009 PARTS LIST Left tube 2 Washers 2 Well nuts Right tube (with
TOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
Digital Radiation Screen - Introduction
Digital Radiation Screen - Introduction This Digital Radiation Screen design is intended to be used to screen a digital sensor from direct sunlight and wind. The digital thermometer used in this case is
TOYOTA MOTOR EUROPE CA Products Division Tel : Fax :
TOYOTA MOTOR EUROPE CA Products Division Tel : + 32 2 745 26 77 Fax : + 33 2 745 26 99 Ordering part numbers Comments Part Numbers Wooden floor one hatch PZ449-D3C42-11 one hatch with carpet PZ449-D3C42-01
OPERATOR ADAPTER APCABVA
OPERATOR ADAPTER APCABVA Installation Instructions for Allen-Bradley Bulletin 1494V (Variable Depth) 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
BLUEMOTION UXP, CDP, SD
Feed and Support Kit Contents FEED KIT CONTENTS: - One () 7 Feed Cord - One () 4 Canopy - One () Grommet - One () Threaded Barrel - One () 7 Swedged Suspension Cable - One () Y-Cable Assembly with Cable
#27541 Mobile Laptop. Charging Station. Assembly Instructions
1 #27541 Mobile Laptop Charging Station Assembly Instructions #27541 Mobile Laptop Charging Station Part Drawing Description Qty Part Drawing Description Qty Hardware List P-1 Left Leg Welded 1 EA A Phil
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
Hawko LED Flex & Accessories Installation Instructions
LED Flex & Profiles Hawko LED Flex & Accessories Installation Instructions Contents Installation of IP20 LED Flex 4 Installation of IP67 LED Flex 6 Mounting Channel Installation 8 Mounting Clip Installation
INSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
Height Adjustable Benching End Panel and Utility Pole
Height Adjustable Benching End Panel and Utility Pole Tools required: END PANEL Jig Saw Power Drill END PANEL WITH UTILITY POLE Bit Holder Long #2 Square Drive Bit 5mm Hex Drive Bit UTILITY POLE Level
WORKSURFACE ASSEMBLY
WORKSURFACE ASSEMBLY Notes: Worksurfaces should be installed last. This provides easy access to Core/Walls. For Double Sided configurations, repeat the following sequences for the opposite side of the
Locks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
METALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
KINEX benching Installation Guide
KINEX benching Installation Guide Index KINEX Installation Guide SINGLE RUN SINGLE RUN Assembly Components... Assembly Outline...5 DOUBLE RUN Assembly Components...8 Assembly Outline...9 Assembly Instructions
How to install the Kreg Bench Klamp System with Klamp Plate on a workbench
How to install the Kreg Bench Klamp System with Klamp Plate on a workbench Posted by Vince M, www.zonetravaux.fr http://www.zonetravaux.fr/2014/01/pince-plaque-serrage-kreg-etabli/ I built my workbench
CrossOver X25 Lock Installation Need another copy of these installation sheets? You can download one at
CrossOver X25 Lock Installation Need another copy of these installation sheets? You can download one at www.crossoverlock.com/supportcenter.htm 1 Back view of installation Major lock parts 1. Rear handle
BX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
Exploded Diagram /1/23
& Exploded Diagram www.firstdegreefitness.com 2018/1/23 Upper Frame Assembly A048 Seat Assembly A078 60806 60809 10097 A039 Lower Frame Assembly 10041 1 Nyloc Nut M10 10082 3 Washer M10x21x2 10097 1 Nut
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
TRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS
is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing
Universal flat-panel mount
I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate
HQ Pole Upgrade Kit for HQ Adjustable Table and HQ QuilTable Assembly Instructions 1
HQ Pole Upgrade Kit for HQ Adjustable Table and HQ QuilTable Assembly Instructions QF09775 The pole upgrade kit can be used with or without the QF09700 HQ Precison-Glide track upgrade kit. What s Included
INSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets
TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
RASCH / SAFIX. Release Numbering at RASCH / SAFIX. Structure of families with additional functions. Summary of the forms
RASCH / SAFIX Release 2008 Automatic Search System of Fastenings RECHNERUNTERSTÜTZTES AUSWAHLSYSTEM FÜR SCHNELLEFESTIGER SYSTÈME AUTOMATIQUE DE RECHERCHE DE FIXATIONS Numbering at RASCH / SAFIX Structure
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Furniture Solutions: 68 Shipstation with Storage Shelf Model Numbers: PB001 (D9001, D9010N, D9021, D9030, D9032/D9033, D9098, RC4054) Introduction This document provides the Pitney
OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
Incandescent Lampholders: Edison Screw and Bayonet Cap
: Edison Screw and Bayonet Cap Table of Contents E14 22.223 22.230 E12 22.228 22.231 [08]..10 E17 E27 22.317 [08] 12 22.318 [08] 12, 13 2010-2012 This page is only valid in connection with the general
SW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
MOTORIZED STANDARD SHADE WITH CABLES Installation Instructions
Tools Needed Drill Measuring Tape Pencil 2 Level Plumb Line ¼ Masonry Drill Bit Hammer Linesmans Pliers Cable Cutters Phillips & Flat-Head Screw Driver 11/32 Socket or Open End Wrench 5/32 Allen Wrench
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
ASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
7878 K940. Checkpoint Antenna. Kit Instructions. Issue B
7878 K940 Checkpoint Antenna Kit Instructions Issue B Revision Record Issue Date Remarks A July 7, 2009 First issue B Nov2013 Revised the Checkpoint installation procedures for 7878 and 7874 scanners Added
TOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT General Applicability All 2012 and newer Tacoma models
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
MantelMount. TM1A Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount TMA Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS TM Thank you for choosing the MantelMount television wall mount. Please read this entire manual before
Sapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
Calf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
Flat Panel TV Cart Instruction Manual SKU: STAND-TV02D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv02d
COWO. Customer Wall Outlet. 1 General. 2 Kit content. 3 Handling of the box. TC-1203-IP Rev A, Apr
COWO I N S T A L L A T I O N I N S T R U C T I O N TC-1203-IP Rev A, Apr 2017 www.commscope.com Customer Wall Outlet 1 General Customer Wall Outlet 2 Fiber for max. 2 bend reduced fibers, 2 SC-adapters
STANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
Customer Notice: Congratulations again on your SawStop purchase, and thank you! -SawStop Tualatin, OR
Customer Notice: Congratulations on the purchase of this Sliding Crosscut Attachment. As the owner of a SawStop saw, you are familiar with our high standards for quality, fit and finish. Different from
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
Installation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
HOSTESS TROLLEY U.K.
SERVICE MANUAL HOSTESS TROLLEY U.K. 0312 200 15110 - HL6200DB (Mahogany) 0312 200 15210 - HL6200LB (Teak) 0312 200 15227 - HL6200GO ( Golden Oak) Service Hints Technical Data Wiring Diagram Exploded Views
Baby Grande with Crank, Housing, and Side Rails Installation Instructions
Baby Grande with Crank, Housing, and Side Rails Installation Instructions Tools Needed Hardware Provided (per shade) Hardware Needed Drill 3/8 Metal Drill Bit ¼ Masonry Drill Bit Measuring Tape Pencil
Interactive Monitor Arm
Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods
Installation Instructions: OFC Gas Grip
Installation Instructions: OFC Gas Grip Made in Germany Innovations: 2 gas cables installed in the handlebars Maintenance-free For universal use* Use of top-quality materials Long service life 6 bearings
CAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
INSTALLATION INSTRUCTIONS
SC4 / SC5 LC4 / LC5 CURVED ARMS SEE NOTE #5 & #6 FIXTURE HEAD FIXTURE INSTALLATION 1) TURN OFF POWER. 2) ADJUST FIXTURE HEAD TO THE DESIRE POSITION AND SECURE WITH (2) BUTTON HEAD SCREWS. 3) MAKE WIRE
HAPPY CHICKEN TRACTOR
HAPPY CHICKEN TRACTOR www.thelittlechickenfactory.com Consumer Assembly Instructions 2014 Six-foot unit Picture of six-foot unit shade/rain cover not shown NEW HANDLE INSERT INTO FRAME HOLES WHILE ASSEMBLING
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable