1.4 Section LAMPHOLDERS AND INLINE SWITCHES. Design. Scame by VLM

Transcription

1 LAMPHOLDERS AND INLINE SWITCHES Design The most important component in our projects isn t the new CAD-CAM technology - it s the human element! Scame by VLM 60 61

2 LAMPHOLDERS AND INLINE SWITCHES GENERAL DESCRIPTION' As part of its commercial programme, aimed at improving and further extending the services already supplied to its trading partners, SCAME PARRE S.p.A has entered into a collaborative agreement with VLM S.p.A of Buccinasco (Milan). The objective of this understanding is the assembly and distribution of a range of lampholders, switches and in-line switches. These products are already known in the market as the best currently available and they are being offered with an extremely favourable quality/price ratio. Their technical characteristics are described in this section. The packaging has been designed to meet the needs of wholesale distributors. Service and delivery is of the usual high standard. VERSIONS The following versions are available: - : for incandescent lamps (-) for fluorescent lamps (G5-G23) for halogen lamps (G4-GX5 3-GY6.35-R7s) - Switches press switches pull switches slide in-line switches foot switches - Ceiling accessories COUPLING B22 REFERENCE STANDARDS International Standard IEC European Standard EN Edison screw lampholders International Standard IEC European Standard for tubular fluorescent lamps and starterholders International Standard IEC European Standard EN Miscellaneous lampholders Part 1: General requirements and tests Norma Internazionale IEC Norma Europea EN Switches for appliances Part 1: General requirements CEI Switches for appliances Part 1: General requirements G4 GZ4 GX5,3 GY6,35 R7s Rx7s Rx7s-24 Rx7s-26 Rx7s-32 G5 G23 PLASTIC CANDLES Reference standard EN (IEC 60238) CANDLE LAMPHOLDERS - in thermoplastic material - metal bracket COUPLING BRACKET FIXING WITH PACK QTY. NUMBER Fixing thread: M10 x 1 CANDLE DRIP COVER h 70 mm h 85 mm - in thermoplastic material - available in white or ivory Nipple and screw 50/ S Plastic thread 50/ ES Nipple and screw 50/ S Plastic thread 50/ ES COUPLING HEIGHT COLOUR PACK QTY. NUMBER h 70 mm h 85 mm 50/ CR70A 50/ CR70B 50/ CR85A 50/ CR85B Thermoset lampholders: left, with coupling, partly threaded skirt and metal nipple; right, with coupling, fully threaded skirt and moulded thread. Metal lampholder Detail of locking screw and earth terminal. Slide in-line switch, with neutral connection for flat cable. Fixing thread: M10 x 1 Nipple and locking screw 62 63

3 Reference standard EN (IEC 60238) Reference standard: EN (IEC 60238) THERMOSETTING - Cable 2.5mm 2 (max) COUPLING SKIRT CAP* COLOUR PACK QTY. NUMBER THERMOSETTING - Cable 2.5mm 2 (max) COUPLING SKIRT CAP* COLOUR PACK QTY. NUMBER 50/300 i /300 i B Smooth 50/300 i T and earth terminal Smooth 100/600 i /600 i B 100/600 i G 100/600 i GB 50/300 i G 50/300 i GB 50/300 i /300 i B 100/600 i /600 i B Threaded /600 i G 100/600 i GB Threaded 50/300 i T and earth terminal Partly threaded 50/300 i G 50/300 i GB 50/300 i /300 i B 50/300 i T and earth terminal B (*) Entry: M10 x 1 Partly threaded 100/600 i /600 i B 100/600 i G 100/600 i GB B (*) Entry: M10 x 1 50/300 i G 50/300 i GB SHADE RING -Reference standard EN To be used with threaded skirt lampholders -Lampshade holding ring COUPLING DIMENSIONS COLOUR PACK QTY. NUMBER In thermoplastic Ø 48x8mm 50/ Ø 48x8mm 50/ B Ø 58x13mm Ø 65x12mm 50/ N 50/ B 50/ N 50/ B SHADE RING - Reference standard EN To be used with threaded skirt lampholders - Lampshade holding ring COUPLING DIMENSIONS COLOUR PACK QTY. NUMBER Ø 43x15mm 50/ In thermoplastic Ø 43x15mm 50/ B Ø 43x8,5mm 50/ B 64 65

4 Reference Standard EN (IEC 60238) Reference standard EN (IEC 60238) THERMOSETTING RESIN - T230 C - 2 holes for screw fixing - Screw terminals - Cable: 4mm 2 (max) COUPLING SUPPORT FIXING (mm) COLOUR PACK QTY. NUMBER / 14, /200 i B for 7.2x8.2 slot or 10.5 hole ( * ) i /304T Clip for 39x36 profiled hole 20/200 i /306 for 41x36 profiled hole i /306L FOR LIGHTING CHAINS internal with earth screw i /311T Bracket external with earth screw 20/200 i /313T plastic thread M10x1 i /348 ( *) earth terminal - IPX4 if assembled with gasket - Max. lamp power: 40W - Perforating contacts for flat cable 5x13mm H05RNH2-F 2x1.5mm 2 - Screws that cannot be unscrewed Fix the inside gasket using silicon glue * Gasket not included CERAMIC - T270 C - Unscrewing brake - Screw terminals - Cable section 1.5-4mm 2 Lampholder* Inside gasket IPx3 - IPx N COUPLING DESCRIPTION DIMENSIONE(mm) COLOUR PACK QTY. NUMBER E40 Lampholder with mounting bracket and brake Ø max 70,5 Ø min 53,8 h tot 77,5 10 i B1 E B BRASS PLATED METAL - T210 C - Screw terminals - Cable: 2.5mm 2 (max) - With locking screw - With tube stop - Golden colour EARTH COUPLING SKIRT CAP* TERMINAL COLOUR PACK QTY. NUMBER Threaded (*) Entry: M10 x 1 SHADE RING - Reference standard EN To be used with threaded skirt lampholders - Lampshade holding ring NO 50/300 i YES 50/300 i T COUPLING DESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER Brassed metal Ø 58,5x15mm 50/500 i SURFACE MOUNTING LAMPHOLDER - Reference standard: EN (IEC ) - Protection degree: IP20 - Wall installation - Double insulation e - Suitable for being installed on usually flammable surface Max 60W 1 i F

5 FOR HALOGEN LAMPS Reference standard: EN FOR FLUORESCENT LAMPS Reference Standard EN FOR LOW VOLTAGE HALOGEN LAMPS - Type of coupling: G4/GZ4/GX5.3/GY Made of steatite - Push-in terminals - Cable: Teflon-Fep 150mm FIXING DIMENSIONS HOLES PACK QTY. NUMBER Ø 17x10,2mm N 2 x 3,3mm 100/1000 i FOR FLUORESCENT TUBES - T110 C - Made of polycarbonate - For fluorescent tubes Ø 16 mm - Push fit - Push-in terminals - Recommended stripping 8 ± 1 mm - Phosphor bronze contacts - Rigid or prepared flexible conductor 0.5-1mm 2 G5 2A - 250V - T110 C 100/1000 i B FOR HALOGEN LAMPS - WITH BRACKET - Type of coupling: R7s - Made of steatite - Bracket with central hole and slots - Cable: Teflon-Fep 200mm Assembling indications: DIMENSIONS CENTRAL HOLE SLOTS PACK QTY. NUMBER 140mm Ø 4,5mm N 2 (4,2x14,2mm)* 20/200 i ,5mm Ø 3,4mm N 2 (4,2x9,2mm) 20/200 i ,5mm Ø 3,4mm N 2 (Ø 4,2mm) 20/200 i C * Profiled FOR HALOGEN LAMPS - Type of coupling: R7s/RX7S/RX7S-24/RX7S-26/RX7S-32 - Made of aluminium and steatite - With fixing nut: M14 X 1 - Cable: Teflon-Fep 200mm C FOR FLUORESCENT LAMPS - T140 C 4W = 136,0mm 6W = 212,2mm - Made of polyester glass-fibre filled - Push fit - Push-in terminals - Recommended stripping 8 ± 1 mm - Phosphor bronze contacts - Rigid or prepared flexible conductor 0.5-1mm 2 8W = 288,4mm 13W = 517,0mm G23 2A - 250V - T140 C 50/500 i B DIMENSIONS FIXING HOLE PACK QTY. NUMBER Ø 19x24,8mm Ø 14mm 50/500 i Mounting profiles and material thickness B Thickness: 0,6-1,2mm B Thickness: 0,7-1mm

6 Switches SINGLE POLE SWITCHES Reference Standard EN CEILING ACCESSORIES PRESS SWITCHES - T125 C - Single pole press switches - Push in terminal - Also for inductive current - With locknut - NTR 1119/IMQ - Cable: 1mm 2 (max) DESCRIPTION SHANK COLOUR PACK QTY. NUMBER CYLINDRICAL CEILING ROSE DESCRIPTION COLOUR PACK QTY. NUMBER 2 (1) A / 250V M10 x 1 h8 mm 100 i B M10 x 1 h12 mm 100 i B h Thermoplastic 50/ B 50/ N PULL SWITCHES - T125 C - Single pole switch with cord and white handle grip DESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER / 20 i B 2 A / 250V with bracket 20 i /327B with vertical bracket 20/200 i /328B Dimensions: 15x11,5x27,5 (mm) - Fixing Ø 3,2 mm CONICAL CEILING ROSE DESCRIPTION COLOUR PACK QTY. NUMBER Thermoplastic B N SLIDE IN-LINE SWITCHES - Single pole slide in-line switches - With neutral connection for flat cable - Screw closed cover - ASEV approved - White, black or straw-coloured - Cable: 0.75mm 2 (max) DESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER 20 i B 2 A / 250V 55x24x15 mm 20 i N 20 i P SPHERICAL CEILING ROSE DESCRIPTION COLOUR PACK QTY. NUMBER Thermoplastic 50/ B 50/ N FOOT SWITCHES - Single pole foot switch - With neutral and earth terminals - Clip together case - Also for inductive current - White, black or straw-coloured - Cable: 0.75mm 2 (max) DESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER Ceiling Rose Decoration 20/160 i B 2 (1) A / 250V Ø 50x22,7 mm 20/160 i N 20/160 i P 70 71

7 Switches ART S ART ES ES ART B1 ART ART B ART /304T ART ART , , ART /306L ART /311T ART C ART Ø ,5 53, ,8 17, ART /348 ART ART B ART B ,5 31, ,