Air-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air

Transcription

1 5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air L L 2N L 3NVS (p. 2 40) L 7,9 cm 2 leads and reservoirs. The hollow chambers or central holes are used Flanged plate for end closing of profiles (p. 5-3) Compressed-air intake or discharge at the flanged plate, connection piece, or connection screw fitting (p. 5-4) Air-tight connecting of profiles with longitudinal end connectors or T-connectors (p. 5-6, 5-5) The use of the heavy-duty profiles is preferable in the case of more demanding leak-tightness requirements (e.g. for underwater applications) 8,8 cm (p. 2 41) 9 cm 2 cm 2 9 cm N 4NVS (p. 2-43) 33 cm (p. 2 45) 29 cm 2 29 cm

2 Air-supply elements MGE (2x x) Flanged plate For sealing the ends of the hollow chambers. This enables 4 the profiles to be used as a compressed-air lead For compressed-air introduction or removal when screw plugs are replaced by pneumatic screw fittings 5 Profile machining: thread cutting in the central holes x Flanged plate: diecast aluminum Nm Scope of delivery: Incl. fastening material (FS), screw plug, seals 13 G1/ 2" Nm FS2 x xFS2 Flanged plate: aluminum 16 Scope of delivery: Incl. fastening material (FS), 2 x spacer, 3 x screw plug, seals 18 G1/ 2" x 4x Nm x x Flanged plate: diecast aluminum Scope of delivery: Incl. fastening material (FS), 4 x spacer, screw plug, seals 21 G3/ 4" Notice: Only suitable for light profiles and

3 5-4 MGE 13.1 Air-supply elements G3/8" Connection piece Connection screw fitting -1/4" G1/2" Connection piece For compressed-air intake or discharge at any point on the profile G3/8" for connection at central hole G1/2" for connection at hollow chamber Suitable for light and standard profiles Profile machining: blind hole ; blind hole ø 21 mm (drilling jig , p. -3) ø21 Nm G3/ 8" (A, B) M6x16 Connection piece FS G3/8" x Connection piece diecast aluminum Scope of delivery: Incl. fastening material, seals (A, B) Accessories: Seals A, B (p. 5 6) ø65 45 G1/ 2 Nm 27 M6x16 Connection piece FS G1/2" x Connection piece diecast zinc Scope of delivery: Incl. fastening material, seal (A) Accessories: Seal A (p. 5 6) (A) G1/4" Connection screw fitting -1/4" For screw fitting in central hole Profile machining: Nm ,5 Connection screw fitting -1/4" Scope of delivery: Incl. seal Connection screw fitting: steel; galvanized Seal: PVC, hard

4 Air-supply elements MGE Seal for end-to-end connection of profiles carrying compressed air Profile machining: through hole D (, ); blind hole LF () Required accessories: Longitudinal end connector for profile connection (p. 3-56) D Seal: PUR Scope of delivery: Seal, 2 x spacer D Scope of delivery: Seal, 2 x spacer x LF x Scope of delivery: Seal, 4 x spacer Note: Only suitable for light profile

5 5-6 MGE 13.1 Air-supply elements Longitudinal end connector 45 Pneu T-connector 45 Pneu, seal Longitudinal end connector 45 Pneu for end face mechanical and pneumatic connections of two 45x45 or 45x45L profiles to convert the central bore into a compressed-air line T-connector 45 Pneu for mechanical and pneumatic connections of two 45x45 or 45x45L profiles at a angle to convert the central bore into a compressed-air line Profile machining: in central bore; blind hole DI9.8; blind hole ø 21 mm (drilling jig , p. -3) 827 4x Nm Nm M max = 1 Nm M6x18 FS2 Longitudinal end connector FS 45 Pneu x, 2xFS2 Longitudinal end connector: diecast aluminum Scope of delivery: Incl. fastening material, sealing rings ISO4032 M6 2x Nm Nm M max = 1 Nm FS3 M6x18 T-connector FS 45 Pneu xFS3 T-connector: diecast aluminum Scope of delivery: Incl. fastening material, seals (A, B) for standard and light profiles (A, B) l ø Seal for connection piece and T-connector l Seal l (mm) A For standard profiles B For light profiles NBR