IPS ID 92*14* Series. 40 Series. 28 Series. 30 Series. 40 Series. Catalog 1816 Introduction, En México llame. . Nextel.

Transcription

1 Catalog 86 Introduction, En México llame. Nextel ID 92*4* I 20 Series 2-20 p34 40 Series p p p34z 2-26 p p p p p p20 28 Series p p p p p p p p p p p p p Series p p p p p p p30 40 Series p p p p p p8-040 p p p p p9-40 p p9-080 p p80-00 p p p p p20 0

2 Catalog 86 Introduction, En México Llam.NexTel ID 92*4* Series I p2-088 p2-089 p p23-20 p p24-24 p p2-28 p p23-40 p p 2-22 p p26-60 p26 4 Series 0 Series p p p p p27 Houston, TX77066

3 Catalog 86 Introduction, en México llame 8.NexTel ID 92*4*72847 Shaft & Clamp I 3-06 p3 3-0 p 3-4 p7 3-2 p p p3 3-0 p 3-4 p p p6 Linear p p p p p79 Conduit -046 p -040 p -04 p2-083 p p p -080 p 3-02 p79-20 p -60 p -62 p3-08 p2-2 p2-6 p2-22 p3-082 p3-042 p3-08 p3 2

4 Catalog 86 Introduction, En México llame NexTel ID 92*4*72847 Miscellaneous Door 2-02 p p p39 I 2-03 p p p p p p p p33-06 p p82 T-Slot Coverings 2-0 p p p p p p p p44 2- p4 2-2 p44 2- p4 2-6 p4 2-4 p p p8 4-0 p8 Slide Safety Enclosures p p p38 A40709 A4070 A407 A p p43 A4070 A40706 A4076 A p p p83 A4073 A40704 A40707 A40708 Panel Gussetts p p3 2-0 p p p p Z4 p Z4 p42 3 Houston, TX77066

5 Catalog 86, En México llame 8.Nextel High Strength Aluminum ID 92*4*92847 Mechanical Properties Profile Finish All structural profiles are prime aluminum, mill-certified with metallurgical properties of 600-T, 606-T6, 6063-T6 or 60-T specifications. Yield (0.2 limit) Rm min. 240 N/mm 2 (3,000 psi) Tensile strength Rm min. 260 N/mm 2 (38,000 psi) Note: Cross sectional thickness variations of the profiles may influence yield and tensile strength. Elongation for 2 in. long specimens: 600-T (thickness up thru 0.24 in.), 606-T6 (up thru in.), 60-T (up thru 0. in.) - 8% min 600-T (thickness 0.2- in.), 606-T6 (0.2 in. and over) - 0% min Elasticity E approximately 70,000 N/mm 2 (0,0 kpsi) Brinell Hardness approximately 7 HB 2./87. The molecular structure of the 600-T alloy is generally stable in an ambient temperature range of: -40ºC to +200ºC -40ºF to +392ºF Extreme temperature fluctuations may change the mechanical properties. Clear anodizing: AA M0, C22, A3, Clear Black anodizing: AA M0, C22, A34, Black Minimum depth: 0.00mm ( in.) Surface hardness: approximately 20 HV, outer surface exposed Custom anodizing and protective finishes available Tolerances Defined Rest Points Outer dimensions depending on size ± ( )mm. Extrusions conforming to DIN 7 6 specifications and to blueprints. Twist per 300mm ( ft.) length not to exceed 0.2 and total twist over 6m (20 ft.) length not to exceed.. Flatness 0.0mm (0.004 in.) per 2mm ( in.) of width. Straightness 0.32mm (0.02 in.) per 300mm ( ft.) of length and not exceeding 3mm (0.2 in.) over 6m (20 ft.) of extrusion. Maximum bow 3mm (0.2 in.) over 6m (20 ft.) All 40, 30, 28, and 20 series profiles have a face to T-slot slope. Preload in the material elastic range results in a vibration safe connection because the T-slot lips are pulled flush with the connecting surface. The high quality material used insures the profile T-slot will remember its original shape if disassembly is required, making all profiles completely reusable. Profile Series Preload Range mm mm mm mm 4

6 Catalog 86, En México llame Standard Size Increments.NexTel ID 92*4*72847 Constant size increment permits combination of all sizes and use of common accessories. 40 Series 30 Series 28 Series 20 Series Typical Dimensions T-slot System High accuracy of T-slots up to 80x40 Profile mm from 80x80 Profile mm T-slot and pilot hole center to center tolerances are ±0.2mm 40 Series 30 Series 28 Series 20 Series N

7 Catalog 86 by Part Number ID 92*4*72847Nextel Part # Page Description Moment of Inertia Section Modulus Section I X (cm 2 ) (cm 4 ) (cm 4 ) (cm3) (cm3) Weight (kg/m) x40 Support x36 Post x40 Standard x40 Clamp x40 Bi-Clamp x40 Quarter Round x40-4 Standard x40 Standard x80 Support x80 Standard x20 Standard x20 Standard x40 Bi-Slot Corner x80 Standard x40 Standard x40 Tri-Slot Corner x40 Bi-Slot Midframe x40 Tri-Slot x40 Mono-Slot x40 Light x x x40 Light x40 Heavy x40-4 Heavy x6 Heavy x40 Heavy x80 Heavy x00 Heavy x20 Heavy x28 Heavy x40 Heavy x80 Heavy x40 Heavy Square x20, 20 Series x28 Quad-Slot x x30 Quarter Round x30 Bi-Slot Corner x40, 20 Series x x x x4, 20 Series x x x x x28 Tri-Slot x28 Bi-Slot Corner x28 Bi-Slot Midframe x6 Open-Slot x6 Tri-Slot x6 Bi-Slot x6 Quad-Slot x4 Light x x60 Light x

8 Catalog 86, En México llame 40 Series 8.Nextel ID 92*4*72847 Typical Servicing Dimensions Servicing for Standard Fastening Set 40 (20-002, SS, 20-04) requires M8x6 tap and 7mm access hole through the profile. American Fastening Set (2-003) requires /6-8 tap. Servicing for Universal Fastening Set 40 (20-004, 2-004) requires bore 20mm x 6mm deep into the slot. Pneumatic Universal Fastening Set (20-0) requires bore 20mm x 6mm deep. 7

9 Catalog 86, En México llame 40 Series 8..NexTel ID 92*4*72847 Profile for general engineering structures, weight optimized. Basic fasteners: Standard & Heavy profile: , , ,2-003,2-004 Light profile: 20-04, 20-0, Al, clear or black anodized Clear Black Profile 40x40 Light cut off max. 6M B pkg of 6 at 3M ea B3 pkg of 6 at 6M ea B6 Profile 40x40 Standard cut off max. 6M B pkg of 6 at 3M ea B3 pkg of 6 at 6M ea B6 Profile 40x40 Heavy cut off max. 6M -040 pkg of 6 at 3M ea pkg of 6 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 40x40 pc 8-83 Secure End Cap 40x40 pc 8-93 Profile 40x40 Heavy Square Heavy duty profile for engineering structures where T-slots are not desirable. A 28x28 profile can slide into the inside cavity. Accessories, such as hinges, may be attached anywhere with required machining. Attachment to T-slot of a 40 series profile requires machining (9-04) and fastening set (20-04). Al, clear anodized Fastening set includes: aluminum block, M8 x 20 BHCS, flat plate, spring tension pin 8 x Profile 40x40 Heavy Square cut off max. 6M -40 pkg of 6 at 6M ea Saw cut necessary for cut to length 9-00 Fastening Set Pfl 40x40 Heavy Sq set Service to mount Fast. Set each 9-04 End Cap 40x40 Heavy Square pc

10 Catalog 86, En México llame 40 Series 8.Nextel Universal Fastening Set on 40x40 Bi-Slot Corner profile 2 Connecting three 40x40 Quarter Round profiles using Corner Connector and Connector Cap 8-82 (p. 70) ID 92*4* , 4 Connecting two 40x40 Quarter Round profiles using miter cut and 90 miter connector 20-28Z (p.62) General engineering structures, weight optimized. Particularly useful where smooth, aesthetic appearance is desired. Use Light Standard Fastener (20-04). Profile uses Flat Plate Fastener (20-028) Al, clear or black anodized Clear Black Profile 40x40 Bi-Slot Corner cut off max. 6M B pkg of 6 at 3M ea B3 pkg of 6 at 6M ea B6 Profile 40x40 Bi-Slot Midframe cut off max. 6M B pkg of 6 at 3M ea B3 pkg of 6 at 6M ea B6 Profile 40x40 Tri-Slot cut off max. 6M B pkg of 6 at 3M ea B3 pkg of 6 at 6M ea B6 Profile 40x40 Mono-Slot cut off max. 6M pkg of 6 at 3M ea pkg of 6 at 6M ea Profile 40x40 Quarter Round cut off max. 6M Saw cut necessary for cut to length 9-00 End Cap 40x40 pc 8-83 Secure End Cap 40x40 pc 8-93 End Cap 40x40 Quarter Round pc

11 Catalog 86 8.Nextel ID 92*4* Series Profile 40-4º for octagonal structures Profile 40x40x4 used in 4 Corner Elements (p.7) and with 40x40-4 Connector (p.70) Profile 40-60º for hexagonal structures x40-4 suitable for gusset applications or placing profiles at 4 angle within a structure and can be used for polygonal shaped structures. Profile, R40/80 are ideal for constructing cases, tables and angled bases Al, clear or black anodized Clear Black Profile 40x40-4 Standard cut off max. 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B Profile 40x40-4 Heavy cut off max. 6M B pkg of 9 at 3M ea B3 pkg of 9 at 6M ea B6 Profile 40-4 cut off max. 6M 0-04 pkg of 4 at 3M ea pkg of 4 at 6M ea Profile cut off max. 6M pkg of 4 at 3M ea pkg of 4 at 6M ea Profile R40/80-30º cut off max. 6M Profile R40/80-4º cut off max. 6M 0-08 Profile R40/80-60º cut off max. 6M Profile R40/80-90º cut off max. 6M Saw cut necessary for cut to length 9-00 End Cap 40x40-4 pc End Cap 40-4 pc 8-84 End Cap pc

12 Catalog Series 8.Nextel ID 92*4* Profile 6x80 on Bearing Units 6 2 Profile 6x60 used for electronic mounting 3 Mounting element for Profile 6x40. See page 74. Profile 6x60 used in pneumatic training station (photo courtesy of National Technology Transfer, Inc.) Light construction and support for such items as valves, limit switches, and heavy duty handle (see handles ). Profile 6x80 can be used as base plate on Bearing Units 6. Large surface area of the 6x60 with 8mm and mm T- slots provides convenient attachment of multiple accessories. Ideal as a fixture plate for pneumatics, electrical valves and switches. Profile 6x60 should not be used as a structural member Al, clear or black anodized Clear Black Profile 6x40 cut off max. 6M B pkg of 0 at 3M ea B3 pkg of 0 at 6M ea B6 Profile 6x80 cut off max. 6M 0-08 pkg of 0 at 3M ea pkg of 0 at 6M ea Profile 6x60 cut off max. 6M 0-6 pkg of 0 at 3M ea pkg of 0 at 6M ea Saw cut necessary for cut to length on 6x40 & 6x Saw cut necessary for cut to length on 6x End Cap 6x40 pc 8-8 End Cap 6x80 pc

13 Catalog Series Nextel ID 92*4*72847 General engineering structures, weight optimized and -080 are suitable for construction of linear slides with roller systems; they can also be used for compressed air piping. Basic fasteners: Standard & Heavy profile: , , , 2-003, Light profile: 20-04, 20-0, Al, clear or black anodized Clear Black Profile 80x40 Light cut off max. 6M pkg of 8 at 3M ea pkg of 8 at 6M ea Profile 80x40 Standard cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Profile 80x40 Tri-Slot Corner cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Profile 80x40 Heavy cut off max. 6M -080 pkg of 8 at 3M ea pkg of 8 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 80x40 pc 8-84 Secure End Cap 80x40 pc

14 Catalog 86 8.Nextel ID 92*4* Series Suitable as clamping and mounting surface (fixturing), vertical structural support, general heavy duty structures. Also used as header for bearing block assemblies for Linear System 4 or 2. Suitable for multiple channel compressed air piping. Al, clear anodized Profile 20x40 Standard cut off max. 6M0-20 pkg of 4 at 3M ea pkg of 4 at 6M ea Profile 20x40 Heavy cut off max. 6M-20 Profile 60x40 Standard cut off max. 6M 0-64 Profile 60x40 Heavy cut off max. 6M -40 pkg of 4 at 3M ea pkg of 4 at 6M ea Saw cut necessary for cut to length End Cap 20x40 pc End Cap 60x40 pc

15 Catalog 86 8.Nextel ID 92*4* Series and -28: General engineering structures, heavy duty applications. 60x28 is suitable as clamping and mounting surface (fixturing) used as header for bearing block assemblies for Linear System 4 or and -24: General engineering structures with very high loads or wide spans. Useful as load bearing corner or post. Suitable for multiple channel compressed air piping. Al, clear anodized Profile 40x00 Heavy cut off max. 6M -00 pkg of 8 at 3M ea pkg of 8 at 6M ea Saw cut necessary cut to length Profile 60x28 Heavy cut off max. 6M -28 pkg of at 3M ea pkg of at 6M ea Saw cut necessary cut to length Profile 80x80x40 Corner per meter -084 Saw cut necessary cut to length Profile 20x20x40 Corner per meter -24 Saw cut necessary for cut to length End Cap 40x00 pc End Cap 60x28 pc

16 Catalog 86 8.Nextel ID 92*4* Series General engineering structures, heavy duty applications. For construction of linear slides with roller systems, can also be used for compressed air piping. Al, clear or black anodized Clear Black Profile 80x80 Standard cut off max. 6M B pkg of 4 at 3M ea B3 pkg of 4 at 6M ea B6 Profile 80x80 Heavy cut off max. 6M -088 pkg of 4 at 3M ea pkg of 4 at 6M ea Saw cut necessary for cut to length Profile 80x20 Standard cut off max. 6M 0-22 pkg of 4 at 3M ea Profile 80x20 Heavy cut off max. 6M -22 pkg of 4 at 3M ea pkg of 4 at 6M ea Saw cut necessary for cut to length End Cap 80x80 pc 8-8 Secure End Cap 80x80 pc 8-9 End Cap 80x20 pc

17 Catalog Series 8.Nextel ID 92*4*72847 General engineering structures with very high loads or wide spans. For construction of guides and slides with the Linear System 4 and 2. Suitable for multiple channel compressed air piping. The -089 center area of the profile can be used to house electrical or air lines, or as a manifold for pressurized air (0 psi maximum). A support bearing can be pressed into the center diameter to hold shafts or spindles for rotary or linear motion. Al, clear anodized Profile 60x80 Standard cut off max. 6M 0-60 Profile 60x80 Heavy cut off max. 6M -60 pkg of 2 at 3M ea pkg of 2 at 6M ea Profile 80x80 Extra Heavy cut off max. 6M -089 Saw cut necessary for cut to length End Cap 60x80 pc

18 Catalog 86 Post 8.Nextel ID 92*4* Profile 36x36 fits in cavity of 6x6 profile to create telescoping post for work stations and tables. 6x6 profile suitable as corner post for tables, frames and machine guarding. Hollow square interior accommodates door and access panel counterweights. 0x0 and 0x80 profiles suitable as leg support for 0x9 Conveyor Profile. Use Standard Fastener 0 (20-0) and Flat Plate Fastener (20-028). Al, clear anodized Profile 36x36 Post cut off max. 3M0-036 Profile 6x6 Post cut off max. 6M-06 pkg of 4 at 3M ea pkg of 4 at 6M ea Profile 0x0 cut off max. 6M0-0 pkg of 9 at 3M ea pkg of 9 at 6M ea Profile 0x80 cut off max. 6M0-80 pkg of 6 at 3M ea pkg of 6 at 6M ea Saw cut necessary for cut to length Secure End Cap 6x6 pc 8-99 End Cap 0x0 pc

19 Catalog 86 8Nextel ID 92*4* Series for general engineering structures. Widely used in automotive industry for constructing framework for assembly and conveyor lines. Compatible with all Bosch hardware Al, clear anodized Profile 4x4 Light cut off max. 6M pkg of 6 at 3M ea pkg of 6 at 6M ea Profile 4x4 cut off max. 6M 4-04 pkg of 6 at 3M ea pkg of 6 zt 6M ea Profile 4x60 Light cut off max. 6M Profile 4x90 cut off max. 6M pkg of 8 at 3M ea pkg of 8 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 4 For covering exposed end of 4 series profiles. Glass-filled nylon, black Description Unit Weight Part # End Cap 4x4 pc 9 g 7-83 End Cap 4x90 pc 8 g 7-84 End Cap 4x60 pc g

20 Catalog 86 30, 28 and 20 Series 8.Nextel ID 92*4* , 28 and 20 series T-slots are smaller than 40 series T-slots requiring different hardware. All hardware designed for use with 30, 28 or 20 series profiles are designated with the appropriate series number at the end of the description. Inventory Cart Mobil Parts Bin Rack Safety Guards and Partitions 29 Printer Stand

21 Catalog Series 8. Nextel ID 92*4* Servicing for Standard Fastener 28/30 (20-003) 3 Servicing for Universal Fastener 30 (20-008) and for Butt-Fastener M6 (20-02) Connecting three 30x30 Quarter Round profiles using Corner Connector 30 (22-0) and Radius Connector Cap 30 (22-) Corner connector 30 (see page 70) 4 For general structures, safety guard and partition frames, light duty enclosures and industrial peripherals Al, clear or black anodized Clear Black Profile 30x30 cut off max. 6M pkg of 6 at 3M ea pkg of 6 at 6M ea Profile 30x30 Quarter Round cut off max. 6M B Profile 30x30 Bi-Slot Corner cut off max. 6M Profile 30x60 cut off max. 6M pkg of 8 at 3M ea pkg of 8 at 6M ea Profile 60x60 cut off max. 6M pkg of 4 at 3M ea pkg of 4 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 30x30 pc End Cap 30x60 pc End Cap 60x60 pc

22 Catalog Series 8.Nextel ID 92*4* Servicing for Standard Fastener 28 (20-003) Safety guard and partition frames, light duty enclosures and industrial peripherals such as parts racks, etc. Also suitable for interior design and other commercial applications. Al, clear or black anodized Clear Black Profile 28x28 Quad-Slot cut off max. 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B6 Profile 28x28-4 cut off max 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B Profile 28x28 Tri-Slot cut off max. 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B6 Profile 28x28 Bi-Slot Corner cut off max. 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B6 Profile 28x28 Bi-Slot Midframe cut off max. 6M B pkg of 2 at 3M ea B3 pkg of 2 at 6M ea B6 Saw cut necessary for cut to length 9-00 End Cap 28x28 pc End Cap 28x28-4 pc

23 Catalog 86 8Nextel ID 92*4* Series Safety guard and partition frames, light duty enclosures and industrial peripherals such as parts racks, etc. Also suitable for interior design and other commercial applications. Al, clear or black anodized Clear Black Profile 28x6 Open-Slot cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Profile 28x6 Tri-Slot cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Profile 28x6 Bi-Slot cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Profile 28x6 Quad-Slot cut off max. 6M B pkg of 8 at 3M ea B3 pkg of 8 at 6M ea B6 Saw cut necessary for cut to length 9-00 End Cap 28x6 pc

24 Catalog Series 8.Nextel ID 92*4*72847 Safety guard and partition frames, light duty enclosures and industrial peripherals such as tool hangers, etc. Also suitable for interior design and other commercial applications. Al, clear Clear Profile 28x28 Qtr Round cut off max. 6M Profile 28x28 Tool Hanger cut off max. 6M Light Profile 6x6 Light cut off max. 6M 0-06 Saw cut necessary for cut to length

25 Catalog Series 8.Nextel ID 92*4* series profiles can be used for light duty enclosures and miniature modeling. Also useful as an accessory extrusion where small profiles are needed. mm T-slot requires 20 series hardware. Al, clear anodized -2 Servicing for Std. Fastener 20 (20-02) 3 Servicing for Univ. Fastener 20 (20-040) Profile 20x0 cut off max. 3M 2-20 pkg of 32 at 3M ea Profile 20x20 cut off max. 3M pkg of 32 at 3M ea Profile 20x40 cut off max. 3M 2-24 pkg of 6 at 3M ea Profile 40x40, 20 Series cut off max. 3M pkg of 8 at 3M ea Profile 20x60 cut off max. 3M 2-26 Profile 20x80 cut off max. 3M 2-2 Profile 80x4 cut off max. 3M 2-08 Saw cut necessary for cut to length 9-00 End Cap 20x0 pc End Cap 20x20 pc End Cap 20x40 pc 8-83 End Cap 40x40, 20 Series pc End Cap 20x60 pc End Cap 20x80 pc 8-83 End Cap 80x4 pc

26 Catalog Nextel Guarding and Enclosure 40x40 Clamp Profile ID 92*4* Proper assembly of bi-clamp profile 2 Recommended penetration of the panels into the clamp profiles 3-4 examples Edging profile used as door handle on sliding door x 40 clamp profiles suitable for construction of guards, enclosures, swinging and sliding doors. Accommodates corrugated mesh, sheet metal and plastic panels up to 9. mm thick. Clamped panel adds rigidity to the frame. Bi-clamp profile designed for use as inner post in subdivided panels of large guarding, sliding and swinging doors. Clamp profiles are serviced for screws on 200 ±2 mm centers. Shipped complete with clamping strip (0-0) and M6x6 SHCS. In addition to being a part of 40x40 clamp profiles, edging profile can also be used as a handle or stiffener for panels. Al, clear anodized Profile 40x40 Clamp cut off max. 6M 0-04 pkg of 6 at 3M ea pkg of 6 at 6M ea Profile 40x40 Bi-Clamp cut off max. 6M Edging Profile cut off max. 6M 0-0 pkg of 0 at 3M ea pkg of 0 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 40x40 pc 8-83 Secure End Cap 40x40 pc

27 Catalog 86 32x8 Picture Frame Profile 8. Nextel ID 92*4* Profile 32x8 Mono-slot mitre cut at 4 used on a framed door 2 Assembly of 90 Mitre Connector MD (order Mitre Bracket and set screw separately) 3 Panel dimensions Z Picture frame guarding and enclosures. Accepts panel 0mm (3/ 8 ) thick without using gasket, 6mm (/4 ) thick with Panel Gasket 0 (2-08). Recess for magnetic or foam tape to provide tight seal for noise or dust protection. Easy assembly with 90 Mitre Connector MD (20-28Z). Al, clear anodized Weight 0.94 kg/m Loctite Thread Locker No. 262 recommended to secure setscrews. End cap can not be used with this profile. Profile 32x8 Mono-Slot cut off max. 6m 2-03 Profile 22x32 Light cut off max. 6m Profile 32X22 Slot Saw cut necessary for cut to length 9-00 Panel Gasket 0 cut off max. 2m Mitre Connector MD pc 20-28Z Mitre Bracket pc

28 Catalog 86 Profile 32x8 Bi-Slot 8. Nextel ID 92*4* Assembly of panel frame using 32x8 Bi-slot for use on Rolling Door Guide Profile (2-022) 3 2 Frame for panels 8mm thick without gasket or 6mm thick with Panel Gasket 8 (2-06) 3 Milling of 8mm slot is required for Fastener (20-32) when using 8mm slot for panels Frame for holding panels with Clamp Spring (22-032) or Panel Gasket 0 (2-08) Suitable for guarding, sliding doors and enclosures. Panel up to 9mm thick may be clamped using clamp spring. Number of clamps depends on panel size and load. Panel gaskets 2-06 and 2-08 can be used to secure 6mm (/4 ) panel in T-slots. Al, clear anodized Weight 0.67 kg/m Fastening Set: St, galvanized Weight 9g Clamp Spring: St Weight 4g Profile 32x8 Bi-Slot cut off max. 6M pkg of 0 at 3M ea pkg of 0 at 6M ea Saw cut necessary for cut to length 9-00 End Cap 32x8 pc Fastening Set for 32x8 Bi-Slot Pfl set Clamp Spring pc

29 Catalog 86 Rolling Door Guide. 8.Nextel ID 92*4* Length of vertical door frame member: B = A - 2 mm. For 6mm panel with panel gasket 8 (2-06): C (panel height)= B + 6 mm. For 8mm panel without gasket: C (panel height) = B + 23 mm 2-3 Connection methods for assembling the Door Guide to 40 series profiles 4 Attaching the 32x8 framed door to the Door Guide Profile. Mitre connection of 32x8 Bi-Slot profile (2-032) for door frame is NOT recommended. See page 23 for detail of door frame. Excellent solution for large doors with removable door panels for maintenance. Example: case packers, material handling and packaging installations, enclosures for large machinery. Profile: Al, clear anodized. Weight.78 kg/m Guide Insert: Roller Insert: UHMW, white Roller: Delrin, black with M6x6 Flat point set screw Housing: Al, anodized Weight 4 g Pin: Stainless Steel Rolling Door Guide Profile cut off max. 4M Saw cut necessary for cut to length 9-00 Guide Insert Set set Roller Insert Set set UHMW Guide Profile cut off max 3.M

30 Catalog 86 Sliding Door Guide 8.Nextel ID 92*4* Series 2-02 B = A - mm for removable doors B = A - 0mm for non-removable doors /30 Series To guide light duty panels as sliding windows and access ports for safety guards and enclosures. Installation onto 40, 30 or 28 Series profiles is accomplished without fasteners by snapping into T-slot. Design of lower guide reduces friction of sliding panels. Design of upper guide facilitates easy, lift-out removal of door without disassembly of structure. Al, clear anodized Three tracks for panels up to 6.4mm (/4") thick Weight: 2-02, kg/m 2-03, kg/m Sliding Door Guide 40, Upper cut off max. 3M 2-02 pkg of 0 at 3M ea Sliding Door Guide 40, Lower cut off max. 3M 2-03 pkg of 0 at 3M ea Stiffener/Handle Profile Sliding Door Guide 30/28, Upper cut off max. 3M 2-04 pkg of 0 at 3M ea Sliding Door Guide 30/28, Lower cut off max. 3M 2-0 pkg of 0 at 3M ea Saw cut necessary for cut to length 9-00 Designed as a combination handle and stiffener for sliding panel doors /4 thick. Panels snap into the profile slot and may be additionally secured by an adhesive or fastener. Al, clear anodized Weight 0.93 kg/m Stiffener/Handle Profile cut off max. 3M 2-0 pkg of 0 at 3M ea Saw cut necessary for cut to length

31 Catalog 86 Panel Extrusion Nextel ID 92*4*72847 Extrusion for mounting 34mm (.34") thick insulation panels onto 40 series profiles. Extrusion can be serviced to mount on profile using T-slot nuts. Can also be mounted with double sided tape. Al, clear anodized Weight 0.48 kg/m Panel Extrusion 40 cut off max. 6M 2-08 Saw cut necessary for cut to length 9-00 Panel Holder Profile designed for panels 3-6mm thick. Built-in seal for splash guard applications. Can be used for 40, 30 and 28 series profiles. Rigid PVC base, with vinyl lip seal Weight 0.6 kg/m Description Unit Color Part # Panel Holder Profile cut off max. 3M black 2-06B cut off max. 3M gray 2-06G Saw cut necessary for cut to length 9-00 Mesh Clamp Length = A- mm Length = B - 33mm Wire Mesh Size: A x B less 6 to 0 mm Position for clearance of Std. Fastener Captures wire mesh panel up to.mm thick. Excellent for constructing safety guards when mesh needs not be removable. Installation onto 40, 30 or 28 series profiles is accomplished without fasteners by pressing into T- slot. Support stanchion becomes integral part of panel frame. Al, clear anodized Profile is tapped M6 every 200mm ± 2mm. Includes clamp strip and M6x6 flat point set screws. Weight 0.3 kg/m Mesh Clamp Profile cut off max. 4M 2-00 pkg of 0 at 4M ea Saw cut necessary for cut to length

32 Catalog Nextel ID 92*4*72847 Rack Angle (9 ) M 4 Mounting dimensions 2 Inserting rack angle into 40 series T-slot 3 Rack Angle is secured in T-slot with set screw M6x2 4 Panel is attached to Rack Angle with M or M6 screw and clip nut Non-removable panels can be attached to the blank Rack Angle with double-sided tape 2-0M Used for attaching standard 9" rack or other panel to 40 series profile (30 and 28 series profiles permited, rack angle must be inserted from profile end). Clip nuts for panel mount snap into square holes. Blank Rack Angle can be machined to mount any accessories (see /4 Turn Receptacle). Al, clear anodized Complete with M6x2 flat point set screws. Weight: 2-09M 0.62 kg/m 2-0M 0.63 kg/m Clip Nut 9" Rack Angle cut off max M 2-09M Rack Angle, Blank cut off max M 2-0M Saw cut necessary for cut to length 9-00 Square nut with clip attachment for 9" Rack Angle. Nut snaps into square holes for attaching panels and accessories. St, zinc plated Weight g * Due to almost identical geometric and dimensionsal shape of M and #0-32 UNF threads, standard #0-32 screws will fit in M Clip Nut. Clip Nut M* pc Clip Nut M6 pc

33 Catalog 86 Clamp Bar 8. Nextel ID 92*4*72847 For attachment of 40 series profiles to base plates and other parts. Must be used in pairs to accomplish proper clamping of the profile. Not recommended for use on linear applications. Al, clear anodized Weight.24 kg/m Clamp Bar Profile cut off max. 2M 2-0 Saw cut necessary for cut to length 9-00 Gusset Profile Can be cut and machined for custom gussets and support structures. Anodizing on request. For standard gusset brackets see page 74. Al, mill finish Weight 4.84 kg/m Gusset Profile cut off max.3m 20-02Z4 Saw cut necessary for cut to length L-Bracket Profile Can be cut and machined for custom floor mounting or other types of brackets. Anodizing on request. For standard floor mounting brackets see page 82. Al, mill finish Weight 7.2 kg/m L-Bracket Profile cut off max. 3M 2-07Z4 Saw cut necessary for cut to length

34 Catalog 86 UHMW Slide Bar 8. nextel ID 92*4*72847 UHMW slide bar 28/30 between two profiles UHMW slide strip on a parallel application Durable, low-friction material, selflubricating and easily machined. Provides a smooth gliding surface on a wide range of applications, from linear systems to adjustable work surfaces. Use Slides Bars and for 40 series profiles, for 28 and 30 profiles. Slide Strip 2-40 can be used with all 40, 30 and 28 series profiles. UHMW, white UHMW, black antistatic (2-420B) UHMW Slide Bar 40x40 cut off max. 3M UHMW Slide Bar 40x0 cut off max. 3M UHMW Slide Bar 40x0, Antistatic cut off max. 3M 2-420B UHMW Slide Bar 28/30x8 cut off max. 3M UHMW Slide Strip cut off max. 3M Saw cut necessary for cut to length