T F E. Effective. Feb iconplastics.com.au. Icon Weatherseal

Transcription

1 T F E sales@iconplastics.com.au Effective Feb 2017 iconplastics.com.au W Icon Weatherseal

2 Capabilities Icon Plastics is a privately owned and operated Australian business employing approximately 250 staff. Operating for over 50 years the internal strengths and opportunities have cemented Icon s place in the Australian plastics conversion market. Both viable and diversified, Icon is in good stead to continue growing in the future. icon Australia 2 sites in Hallam (head office) Seaford Doveton Brisbane Offices: South Australia New South Wales Tasmania Western Australia South Africa Icon s ability to meet customer requirements and quality expectations have earnt us the reputation of a supplier that can be counted on. Brisbane Size Equipment 11,000 m2 1 Extruders 2m to 90mm [twin screw PVC] 17 Injection moulding [15 tonne up to 50 tonne] Tool Room Assembly

3 With warehouses and representation in all Australian states, USA, Europe, South America, Asia and New Zealand and exporting to 28 countries and quality accreditations including Quality TS-1949:2008 and ISO9001:2008, Icon Plastics clearly has the capacity and experience to deliver from the simple to the complex; the small to large; the local to global! Employing approximately 250 staff at 4 manufacturing locations in Victoria and Queensland Quality ISO 9001 Automotive TS 1949 Hallam Size Equipment 11,000 m2 2 Injection moulders [up to 1,500 tonnes] 25Lt Blow moulders 2 Vertical 5T - 80T 17 Extruders [1/4 inch up to inch] Doveton HASAP TGA APPROVED Co-Extrusion capabilities Dual (twin) material injection moulding Assembly Tool Room Size Equipment 2,000 m2 11 Extruders Exclusive Tube Extrusion Seaford HASAP TGA APPROVED Size Equipment,000 m2 14 Blow moulders [5Lt] 2 Injection blow machines 2 Preformer machines 7 Injection moulding [up to 400 tonnes] 2 Liquid Silicone Rubber [up to 200 tonnes] Screen printing and pad printing Assembly

4 ICON WEATHERSEAL --- DOOR SEALRANGE Illustration Features Part No. Barcode Length Colour Inn/ Ship/ Cu.ft IPDS 1 Plastic Door Seal The IPDS 1 Plastic Door sweep type made of a flexible extrusion of PVC. for sliding and swinging doors. The installation is simple and does not require the door to be removed. IP-720 IP Brown 0 0 SEALING GAP: mm - 10mm PRODUCT LENGTH: 91m (can be cut to desired length) INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. Can also be screw mounted if required. (Screws not included) SEAL MATERIAL: PVC (Brown and ) IPDS 2 20mm Econo Door Seal The IPDS 2 Econo Door sweep type made of a Aluminium extrusion and EVA material. for sliding and swinging doors. IP-501 IP Bronze Silver 0 0 SEALING GAP: mm - 1m PRODUCT LENGTH: TION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. Can also be screw mounted if required. (Screws not included) SEAL MATERIAL: EVA material (Black) IPDS 2A 40mm Econo Door Seal The IPDS 2A Econo Door sweep type made of a Aluminium extrusion and EVA material. for sliding and swinging doors. IP-502 IP Bronze Silver 0 0 SEALING GAP: 1mm -m PRODUCT LENGTH: TION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. Can also be screw mounted if required. (Screws not included) SEAL MATERIAL: EVA material (Black) IPDS Compact Door Seal The IPDS Compact Door sweep type made of a Aluminium extrusion and PVC medium soft material. for sliding and swinging doors. IP Bronze 0 SEALING GAP: mm - 1m PRODUCT LENGTH: TION METHOD: Screw-on for direct installation.(screws included) Surface must be smooth, clean, flat and dry. SEAL MATERIAL: PVC medium soft Material (Black) 1

5 ICON WEATHERSEAL --- DOOR SEALRANGE Illustration Features Part No. Barcode Length Colour Inn/ Ship/ Cu.ft IPDS 4 Plastic Brush Door Seal The IPDS 4 Plastic Brush Door Seal is a Surface mounted sweep type made of a PVC extrusion and PP Brush material. for sliding and swinging doors. It is especially suitable for rough textured floor surface such as Slate or un-even tiles IP-04 IP Brown 0 0 SEALING GAP: 10mm -20mm PRODUCT LENGTH: TION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. Can also be screw mounted if required. (Screws not included) SEAL MATERIAL: PP Brush material (Black) IPDS 5 Compact Brush Door Seal The IPDS 5 Compact Door sweep type made of a Aluminium extrusion and PP Brush material. for sliding and swinging doors. It is especially suitable for rough textured floor surface such as Slate or un-even tiles IP Silver 0 SEALING GAP: 10mm - 20mm PRODUCT LENGTH: TION METHOD: Screw-on for direct installation. (Screws included) Surface must be smooth, clean, flat and dry. SEAL MATERIAL: PP Brush Material (Black) IPDS 11Automatic Hinged Door Seal The IPDS 11 & Automatic Hinged Door Seal is a Surface mounted Automatic lifting type made of an Aluminium extrusion and PVC material. for swinging doors. IP-51 IP Bronze Silver LOCATION: Door bottom edge. SEALING GAP: mm - mm PRODUCT LENGTH: 91m (can be cut to desired length) INSTALLATION METHOD: Screw-on installation. (Screws included) SEAL MATERIAL: PVC Material (Black) IPDS 11 Special - Seal weather seal tape P The IPWS 11 Special-Seal is a Self-adhesive surface mounted weather seal made of IP-1 IP Brown a flexible extrusion of EPDM Rubber. This weather seal is suitable for domestic and commercial doors or windows. LOCATION: Door and Window jambs. SEALING GAP: mm - m PRODUCT LENGTH: (can be cut to desired length) INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: Extrusion EPDM Rubber (Brown, and ) 2

6 ICON WEATHERSEAL --- WEATHER SEAL RANGE Illustration Features Part No. Barcode Length Colour Inn/ Ship/ Cu.ft IPDS Multi - Seal weather seal tape The IPWS Multi-Seal is a Self-adhesive surface mounted weather seal made of a flexible extrusion of Closed Cell Foam. IP IP-2102 IP Brown This weather seal is suitable for domestic and commercial doors or windows. LOCATION: Door and Window jambs. SEALING GAP: 2.m - 4.8mm PRODUCT LENGTH: (can be cut to desired length) INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: Closed Cell Foam (Brown, and ) IPWS 8 Brush Seal weather seal tape The IPWS 8 Brush-Seal is a Self-adhesive surface mounted weather seal made of a flexible extrusion of PP brush material. This weather seal is suitable for domestic and commercial doors or windows. IP LOCATION: Door and Window jambs. SEALING GAP: mm - m PRODUCT LENGTH: (can be cut to desired length) INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: PP Brush () IPWS 4 Econo - Seal weather seal tape The IPWS 4 Econo-Seal is a Self-adhesive surface mounted weather seal made of a flexible extrusion of Open Cell Foam. This Multi Purpose seal is suitable for domestic doors or windows. IP-102 IP-1102 IP-401 IP-1401 IP-402 IP-1402 IP LOCATION: Edges and jambs SEALING GAP: Up to mm - mm LOCATION: Door and Window jambs. SEALING GAP: mm - mm PRODUCT LENGTH: 2. - (can be cut to desired length) INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: Open Cell Polyurethane Foam ( and ) IPWS 5 Handy Seal The IPWS 5, and 7 Handy Seal is a Self-adhesive surface mounted seal made of a flexible extrusion of Closed Cell Foam. This multiple use seal is suitable for a multitude of domestic and commercial applicatios. and does not require any door or windows etc. to be removed. IP-2810 IP IP M M 10M Black Black Black LOCATION: Ideal for roofing purlins or battens. SEALING GAP: Up to 4.m INSTALLATION METHOD: Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: Closed Cell polyethylene Foam ()

7 ICON WEATHERSEAL --- WEATHER SEAL RANGE Illustration Features Part No. Barcode Length Colour Inn/ Ship/ Cu.ft IPWS 9Flexi-Seal Sealing Tape The IPWS 9 Flexi-Seal is a self-adhesive surface mounted seal made of a flexible extrusion of Closed Cell Foam. This multiple use seal is suitable for a multitude of domestic roofing and outdoor applications. IP M LOCATION: Ideal for roofing purlins or battens. SEALING GAP: Up to 4.m Self-Adhesive tape on back for direct adhesion. Surface must be smooth, clean, flat and dry. SEAL MATERIAL: Closed Cell polyethylene Foam () IPGF 1 Gap Filler Rod The IPGF 1 Gap Filler Rod is a flexible extrusion of Close Cell Foam. This backing rod is suitable for domestic and commercial applicatios where deeps gap or cracks need to be filled in conjunction with a caulking product. IP-810 IP-819 IP-817 IP m x 10mm x mm x mm x 10m SEALING GAP: Up to 1m PRODUCT LENGTH: As per below chart. INSTALLATION METHOD: Press or squeeze into Gap or crack. SEAL MATERIAL: Extruded Close Cell Polyurethane Foam ()

8 Icon Weatherseal Icon Plastics Pty Ltd ABN Registered Office Hallam South Road Hallam, VIC 80 Australia PO 87 Narre Warren VIC 805 Australia Tel: Fax: Queensland Office 8-10 Hinkler Court Brendale, QLD 4500 Tel: Fax: Seaford Branch 2 Klauer Street Seaford, VIC 198 Tel: Fax: Sales Tel: Sales Fax: icon@iconplastics.com.au