CROSS SECTIONS OF PATIO DOORS

Transcription

1 CROSS SECTIONS OF PATIO DOORS MOUNTING OPTIONS FOR A SINGLE DREAMSCREEN OPTION A Attach the housing to a 1 x 2 rectangular aluminum tube that is attached to the stile (frame) of the fixed patio door panel. The tube may need grooves to clear patio door track and header Height Patio Header Inside sliding door panel Fixed door panel 1 x 2 aluminum tubing housing Patio track OPTION B Mount the directly to the fixed panel frame (applicable to 2, 3 and 4 Panel doors). OPTION C When both door panels are moveable but only one of the panels are screened. The bug sweep allows both panels To open. The height measurement is the same as OPTION A Housing Housing Height 1 x 2 rectangular aluminum tubing Full length Bug Sweep Patio Screen Track SEE TOP VIEWS ON NEXT PAGE

2 TOP VIEWS OF 2 PANEL PATIO DOORS The must be mounted opposite the moving door panel OPTION A Fixed door panel Magnet 1 x 2 rectangular aluminum tube Housing OPTION B 1 x 2 rectangular aluminum tube Housing Magnet OPTION C Magnet Housing Option D, Both door panels are operable OPTION D Full height flexible bug sweep attached to the 1 x 2 tube 1 x 2 rectangular aluminum tube is self supported at the top and bottom with angle clips, the tube is not attached to the patio door panel

3 TOP VIEWS OF 3 AND 4 PANEL PATIO DOORS The must be mounted opposite the moving door panels 3 PANEL DOOR Sliding Panel 1 x 2 alum tube spacer Guide rail Housing 3 PANEL DOOR guide rail Housing 4 PANEL DOOR Guide rail s Housing s Housing Other mounting locations can be used, s can adapt to nearly any application. Shown are examples of common installations.

4 FLUSH MOUNTING DIAGRAM FLUSH MOUNT (Inside of the door frame) CROSS SECTION FOR EITHER SINGLE OR DOUBLE DOORS FOR IN-SWINGING OR FOR OUT-SWINGING DOORS Frame Header Thresholds can me held in place using 1 ¾ Either polyurethane or silicone caulk against the guide rail, OR flat head screws thru the top of the threshold. Upper Guide Rail height Opens Lower Guide Rail Flat Threshold Installation shown is very typical and the flat threshold adapts perfectly 11/16 Hinge Existing Threshold Caulk behind the guide rail to support The threshold TOP VIEW OF A SINGLE DOOR FLUSH MOUNT ENTRY DOOR Pull Rail Jamb and Magnet (5) #6 x ¾ flat hd screws (2) #8 x 2 ½ or 3 mounting Screws 1

5 FACE MOUNTING DIAGRAM FACE MOUNT (on the face of the door frame) CROSS SECTION FOR EITHER SINGLE OR DOUBLE DOORS FOR IN-SWINGING OR FOR OUT-SWINGING DOORS Face of the door frame Thresholds can me held in place using 1 ¾ frame header Either polyurethane or silicone caulk against the guide rail, OR flat head screws thru the top of the threshold. Upper Guide Rail height Opens Installation shown is very typical and the flat threshold adapts perfectly 11/16 Lower Guide Rail Flat Threshold Existing Threshold Caulk behind the guide rail to support The threshold

6 FACE MOUNTING DIAGRAMS FOR DIFFERENT TYPES OF MOLDING FOR EITHER IN-SWINGING OR OUT-SWINGING DOORS FOR EITHER SINGLE OR DOUBLE DOORS (AS SHOWN) Installation on Colonial Type Molding Jamb Single Jamb Pull Rail Jamb, Jamb Support & Magnet Screen Housing (5) #6 x ¾ round head screws Installation on Colonial Type Molding Double (2) #8 x 2 ½ or 3 pan head screws (per housing) Molding Shim Installation on Cove or Curved Molding Molding shims or equivalent are required To support the housing(s) and jamb magnet Molding Shim TYPES OF FACE MOUNTS AT THE DOOR HEADER Upper Guide Rail Height Height Single Double Single or Double Colonial Molding Colonial Molding Cove or Curved Molding