HONG JI PRECISION MACHINERY LTD.

Size: px

Start display at page:

Download "HONG JI PRECISION MACHINERY LTD."

Owen Bradford
5 years ago
Views:

Professional Manufacturer of Deep Hole Drilling Machine STANDARD ACCESSORIES OPTIONAL ACCESSORIES Paper filter Magnetic separator Chip and oil separator system High-pressure oil pump Auto lubrication

Cutting oil Gundrill Guide bushing Whip guide insert Automatic Voltage stabilizer Fully guard Gundrill grinder Air condition Oil mist collector Bag filter housing Centrifuge We reserve the right to

1 Professional Manufacturer of Deep Hole Drilling Machine STANDARD ACCESSORIES OPTIONAL ACCESSORIES Paper filter Magnetic separator Chip and oil separator system High-pressure oil pump Auto lubrication system Spindle motor loading monitor Outer oil tank / Oil level gauge Transformer Leveling screws & block Tool box / work light / alarm light Mechanical / Electrical operation manual Oil cooler Cutting oil Gundrill Guide bushing Whip guide insert Automatic Voltage stabilizer Fully guard Gundrill grinder Air condition Oil mist collector Bag filter housing Centrifuge We reserve the right to modify the design and specifications without notice in advance. HONG JI PRECISION MACHINERY LTD No.93, Aly. 46, Ln. 388, Sec. 2, Xinan Rd., Wuri Dist., Taichung City 44, Taiwan TEL: FAX: hongji.drill@msa.hinet.net http : // Agent THAILAND BRANCH TAIWAN HONG JI PRECISION MACHINERY CO., LTD. 9/2 GP.7 BANGNA-TRAD RD., BANGCHALONG BANGPLEE SAMUTPRAKARN THAILAND TEL: FAX: HONG JI PRECISION MACHINERY LTD.

STseries Deep Hole Drilling Machine ST3000 Bed Type HRC60 3 2 Y ST3000 This machine is suitable for drilling water line of big plastic moulds,

All axes are harden slide ways made by cast iron and done surface hardness to HRC60 to offer a stable performance as drilling big holes with

Even drilling holes in high position of Y-axis, performance is still stable and accurate.

Worktable Travel Speed X Y Table cross travel (X) Spindle vertical travel (Y) Drilling feed Spindle rpm,000mm 800mm 0-250mm/min High pressure

2 STseries Deep Hole Drilling Machine ST3000 Bed Type HRC Y ST3000 This machine is suitable for drilling water line of big plastic moulds, oil channel of spindle sleeve for heavy-duty turning machine and parts of hydraulic press machine. All axes are harden slide ways made by cast iron and done surface hardness to HRC60 to offer a stable performance as drilling big holes with 3000mm length. Equipped with 2 meters width of main column and sub-column to support Y-axis movement. Even drilling holes in high position of Y-axis, performance is still stable and accurate. Specification Model ST-3000 Controller Drilling Capacity Spindle number Drilling diameter Drilling depth (Z) ø5-ø40mm 3,000mm 200x3000mm Worktable Travel Speed X Y Table cross travel (X) Spindle vertical travel (Y) Drilling feed Spindle rpm,000mm 800mm 0-250mm/min High pressure pump 0~80kg/cm² 30~00L/min,500L Worktable Table dimensions Maximum loading weight,200x3,000mm 20,000kgs 2 2 meter wide column Other Optional function Machine weight (Kg) Machine dimensions (including accessories) Milling&Tapping 38,000kgs 3700x200x3300mm HONG JI PRECISION MACHINERY LTD. 2

ST series Deep Hole Drilling Machine Bed Type 特性 Features : 此型數控深孔鑽孔機專門加工大型模具水道孔模具頂出孔及射梢孔

types of machines with control are designed for drilling waterlines, ejector pin holes of large

FC-32 castings have been stress relived and annealed.

These types of machines also can be equipped with second spindle for milling & tapping and rotary

分度盤 rotary table 銑攻主軸 Spindle for milling & tapping 全罩板金 Fully guard 型號 Model 規格 Specification 控制器

Drilling depth (Z) 2,000mm,500mm X軸 Table cross travel (X) 2,200mm,600mm Travel Y軸 Spindle vertical

0-250mm/min 0-250mm/min Speed 主軸轉速 Spindle rpm 切削油壓 0~00kg/cm² 0~00kg/cm² 出油量 30~00L/min 30~00L/min 油箱

0,000kgs Milling & Tapping (銑/攻牙) Milling & Tapping (銑/攻牙) 工作台工作台尺寸 Table dimensions Worktable 最大載重

3 ST series Deep Hole Drilling Machine Bed Type 特性 Features : 此型數控深孔鑽孔機專門加工大型模具水道孔模具頂出孔及射梢孔寬厚高剛性立柱採用FC-32煉製並經退火處理提供機台穩定加工特殊快速刀具裝卸設計大幅增加工作效率另可加裝銑攻牙主軸及分度盤提升機台複雜加工運用的能力 ST2000 / ST500 These types of machines with control are designed for drilling waterlines, ejector pin holes of large injection molds. The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed. Special quick tool-changing design to increase work efficiency many times. These types of machines also can be equipped with second spindle for milling & tapping and rotary table to increase machines' capacity for complex processes. 分度盤 rotary table 銑攻主軸 Spindle for milling & tapping 全罩板金 Fully guard 型號 Model 規格 Specification 控制器 Controller ST-500 主軸數 Spindle number 鑽孔範圍 Drilling diameter ø3-ø25mm(ø5-ø40mm) ø3-ø25mm(ø5-ø40mm) 鑽孔深度 Drilling depth (Z) 2,000mm,500mm X軸 Table cross travel (X) 2,200mm,600mm Travel Y軸 Spindle vertical travel (Y),200mm,000mm W軸 Column-moving travel (W) (Option) 500mm 400mm 速度進給速 Drilling feed 0-250mm/min 0-250mm/min Speed 主軸轉速 Spindle rpm 切削油壓 0~00kg/cm² 0~00kg/cm² 出油量 30~00L/min 30~00L/min 油箱鑽孔能力 Drilling Capacity 行程高壓油泵 High pressure pump 3 ST-2000,500L,500L,600x2,600mm,300x,800mm 5,000kgs 0,000kgs Milling & Tapping (銑/攻牙) Milling & Tapping (銑/攻牙) 工作台工作台尺寸 Table dimensions Worktable 最大載重 Maximum loading weight 其他功能 Optional function 其他其他配件 Optional accessories Rotary table (分度盤) Rotary table (分度盤) Other 機台重量 Machine weight (kg) 23,000kg 9,000kg 機台尺寸 Machine dimensions (including accessories) 700x7000x3500mm 6800x6300x3500mm HONG JI PRECISION MACHINERY LTD. 4

STseries Deep Hole Drilling Machine Bed Type XW ST200 This type of

and coolant oil offered enough as drilling.

The worktable can cross moving, so it is suitable for drilling

Special quick tool-changing design to increase work efficiency many

Milling function Tapping function W Wortable & W axis Fully guard

pressure pump Worktable Other Model Spindle number Drilling diameter

travel (Y) W Column-moving travel (W) (Option) Drilling feed Spindle

4 STseries Deep Hole Drilling Machine Bed Type XW ST200 This type of machine with four axes is designed for drilling medium size molds and irregular workpieces. With well chip-removing system and oil cycle, chips don't obstruct and coolant oil offered enough as drilling. Worktable is with X-axe and W-axe. The worktable can cross moving, so it is suitable for drilling irregular workpieces. Special quick tool-changing design to increase work efficiency many times. Milling function Tapping function W Wortable & W axis Fully guard Specification Controller Drilling Capacity Travel Speed High pressure pump Worktable Other Model Spindle number Drilling diameter Drilling depth (Z) X Table cross travel (X) Y Spindle vertical travel (Y) W Column-moving travel (W) (Option) Drilling feed Spindle rpm Table dimensions Maximum loading weight Optional function Machine weight (kg) Machine dimensions (including accessories) ST-200 ø3-ø25mm(ø5-ø40mm),200mm,000mm 800mm 400mm 0-250mm/min 0~00kg/cm² 30~00L/min,500L,000x,200mm 5,000kgs Milling&Tapping 2,000kg 5800x4200x3000mm 5 HONG JI PRECISION MACHINERY LTD. 6

STseries Deep Hole Drilling Machine Knee Type ST000 This machine with controller is designed for the production of

Hardened and ground Main slide ways to hardness HRC 50.

This machine also can be equipped with W axis to reduce leading time for set up work piece and work efficiently.

Model Spindle number Drilling diameter Drilling depth (Z) Table cross travel (X) Table vertical travel (Y) Drilling feed

5 STseries Deep Hole Drilling Machine Knee Type ST000 This machine with controller is designed for the production of waterlines, heat and ejector pin holes of injection molds, hydraulic manifold and heat-exchangers which require multi hole drilling. Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust. Hardened and ground Main slide ways to hardness HRC 50. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface. This machine also can be equipped with W axis to reduce leading time for set up work piece and work efficiently. W W axis Fully guard Specification Controller Drilling Capacity Travel Speed High pressure pump Worktable Optional X Y W Model Spindle number Drilling diameter Drilling depth (Z) Table cross travel (X) Table vertical travel (Y) Drilling feed Spindle rpm Table dimensions Maximum loading weight Optional function Table forward & backward travel (W) Table dimensions Machine dimensions (including accessories) ST-000 ø3-ø25mm,000mm 500mm (600mm) 350mm 0-250mm/min 0~00kg/cm² 30~60L/min,200L 600x,000mm,000kgs Milling&Tapping 20mm 600x,200mm 5400x3600x2500mm 7 HONG JI PRECISION MACHINERY LTD. 8

STseries Deep Hole Drilling Machine Knee Type ST500 These types of

smooth and convenient for feed rate adjust.

3 spindles design 6 spindles design Fully guard Specification Model

number Drilling diameter Drilling depth (Z) ø3-ø25mm 500mm 2 / 3 / 4 /6

500mm 300mm 500mm 300mm Speed Drilling feed Spindle rpm 0-250mm/min

0~00kg/cm² 30~00L/min,400L~600L Worktable Table dimensions Maximum

6 STseries Deep Hole Drilling Machine Knee Type ST500 These types of machines with controller and multi-spindles are designed for mass-production. Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust. Machine can be equipped with auto-fixture related to workpieces. 3 spindles design 6 spindles design Fully guard Specification Model ST-500 ST-500B / ST-500D / ST-500G Controller Drilling Capacity Spindle number Drilling diameter Drilling depth (Z) ø3-ø25mm 500mm 2 / 3 / 4 /6 ø3-ø5mm 500mm Travel X Y Table cross travel (X) Table vertical travel (Y) 500mm 300mm 500mm 300mm Speed Drilling feed Spindle rpm 0-250mm/min 0-250mm/min 0~8,000 High pressure pump 0~00kg/cm² 30~60L/min,000L 0~00kg/cm² 30~00L/min,400L~600L Worktable Table dimensions Maximum loading weight 600x,000mm 500kgs 600x,000mm 500kgs Other Optional fixture Machine dimensions (including accessories) Workpiece fixture 4500x3200x2500mm Workpiece fixture 4700x3400x2500mm 9 HONG JI PRECISION MACHINERY LTD. 0

SL series Automatic Workpiece- Feeding System MASS- PRODUCTION Type The

workpieces on the conveyer. Then all work will be done automatically.

diameter Drilling depth (Z) Drilling feed Spindle rpm Fixture device Other

7 SL series Automatic Workpiece- Feeding System MASS- PRODUCTION Type The machine offers mass production in drilling single size of round bar. Job-doing efficiently. With auto-loading and unlaoding system, operator just needs to put workpieces on the conveyer. Then all work will be done automatically. Block of conveyer is made by high-quality plastic material can prevent the damage from oil and crash. Auto loading & Unloading system Model Controller Spindle number Drilling diameter Drilling depth (Z) Drilling feed Spindle rpm Fixture device Other design SLA series / NC 4 ø3-ø5mm 00-,000mm 0-250mm/min 0~8,000 0~00kg/cm² 30~00L/min,600L / Hydraulic clamping Automatic loading&unloading SLA-000D SLA-200D HONG JI PRECISION MACHINERY LTD. 2

8 SL series Economicl and High-accuracy Type Model Controller Spindle number SL series / NC ~4 These types of machines are economical and suitable to drill many kinds of round bars. Equipped with the motor in the rear of machine, the motor drives workpiece counter-rotating to increase concentricity. Using manual three-jaw chuck to fix round bars, also be equipped with hydraulic chucks per job. Drilling diameter Drilling depth (Z) Drilling feed Spindle rpm Fixture device Other design ø2-ø6mm / ø3-ø2mm / ø0-ø25mm / ø20-ø50mm 300 / 500mm /,000mm /,500mm / 2,000mm 0-250mm/min 0~00kg/cm² 30~00L/min 800L~,400L Manual chuck /Hydraulic chuck Workpiece counter-rotating HMI control panel Clamping & Rotating system Hydraulic clamping system SL-500B SL-500 SL HONG JI PRECISION MACHINERY LTD. 4

9 SL series High-Production and high-efficiency Type Model Controller Spindle number Drilling diameter Drilling depth (Z) Drilling feed Spindle rpm SLY series / NC ~4 ø3-ø5mm/ ø0-ø25 00-,000mm 0-250mm/min 0~8,000 With four sipndles, the machine offers mass production, job-doing efficiently. With hydraulic collects, operator just needs to put workpiece on the rack then workpieces will be fixed auotmatically. Equipped with the motor in the rear of machine, the motor drives workpiece counter-rotating to increase concentricity. Fixture device Other design 0~00kg/cm² 30~00L/min,600L / Hydraulic clamping Automatic loading&unloading Precision spindle Hydraulic clamping system Filtration system Clamping system Precision spindle SLY-500B SLY-000D 5 HONG JI PRECISION MACHINERY LTD. 6

Customized Gun Drilling Machine Special Purpose Machine (SPM):

spindles Third Angle Fifth Angle First Angle Second Angle

Accessories: Fixture unit for gundrill Operation manual Tool

travel Electricity Grinding head motor Light Machine power

70 mm 220v/380v, 2phase /4HP / HP 60 w (max.

10 Customized Gun Drilling Machine Special Purpose Machine (SPM): Machines also can be customized according to your required production. Gundrill Grinder The angle of gun drill SLY-300Z with 8 spindles Third Angle Fifth Angle First Angle Second Angle Chamfering Forth Angle SLA-200D with robot system Standard Accessories: Fixture unit for gundrill Operation manual Tool box x set x set x set Model Grinding range(option) Table cross travel Electricity Grinding head motor Light Machine power rating Grinding head GD25 / GD50 Ø2 ~ 25 mm (Ø20 ~ 50 mm) 70 x 70 mm 220v/380v, 2phase /4HP / HP 60 w (max.) /4HP / HP 2900 rpm (50HZ); 3400 rpm (60HZ) Net weight 50 kg Gross weight 70 kg Machine dimensions (L x W x H) 600 x 450 x 600 mm 7 HONG JI PRECISION MACHINERY LTD. 8

Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E

YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX