COMBI COMBI-U11 COMBI-U10 COMBI-V10 COMBI-U6

Transcription

1 UNIVERSAL MACHINING CENTER VERTICAL MACHINING CENTER COMBI COMBI-U11 COMBI-U10 COMBI-V10 COMBI-U6 1

2 Kiheung Philosophy KIHEUNG ENDEAVOURS TO OFFER THE ULTIMATE TO CUSTOMERS THROUGHOUT THE WORLD Since founded in 1968, KIHEUNG has become one of the most advanced and leading machine tool manufacturers with an effort to supply high quality product to customers. KIHEUNG specialized in CNC bed type milling machine, Travelling column boring and milling center, Double column machining center, Simultaneous five axis machining center, Double column 5 axis and vertical turning machine, is determined to enhance the quality by respecting the customer's requirements with the philosophy of " FULL SATISFACTION TO THE CUSTOMER AND ENDLESS SERVICE TO THE CUSTOMER" Through the spirit of mutual co-operation, KIHEUNG is able to ensure the continuous distribution with high quality machine tools designed to satisfy customer's requirements all over the world. Thanking and trusting in your continuous support. 2

3 KIHEUNG DESIGNED UNIVERSAL HEAD The higher productivity can be reached with KIHEUNG s UNIVERSAL HEAD, which is popular all over the world. Any desired angle milling work can be performed by swiveling the head, which reduces the setting time remarkably. KIHEUNG COMBI-U series with UNIVERSAL HEAD and ATC can enhance the productivity, because it can be used for vertical, horizontal and 90 work with one machine. 3

4 BED TYPE UNIVERSAL MACHINING CENTER COMBI- U11 TABLE SIZE / TRAVEL (X-AXIS) 2300/2800/3200 (Y-AXIS) 1400 (Z-AXIS) 1200 SPINDLE 2000rpm FANUC, HEIDENHAIN 4

5 Fanuc 0i NC Unit Fanuc 0i-M adopted as standard for COMBI-U series. Fanuc 0i NC Unit Ballscrew High-precision preloaded double nut ball screw guarantees the accuracy and smooth movement of the axis travel Ballscrew Telescopic Chipcover Telescopic chip cover protects the ground slide way Telescopic Chipcover Linear Scale Linear Scale 5 Linear scale for X,Y,Z axis, which is attached as standard, guarantees positioning accuracy and repeatability accuracy for a long time. Every machine is inspected with laser for backlash and pitch error compensation, meanwhile QC 10 ball bar test for the roundness and geometric accuracy.

6 BED TYPE UNIVERSAL MACHINING CENTER COMBI- U11 OPTIONAL PROTECTION COVER Protection cover prevents chips and coolant water from scattering on the floor. CHIP CONVEYOR SPINDLE ORIENTATION (RIGID TAPPING) HEAD COOLING 6 Lift up chip conveyor.

7 24 TOOL ATC OPTIONAL 24 tools vertical ATC with twin arm gripper is driven by geared motor with cam and cam follower. A2-HEAD A2-head, which enables automatic vertical / horizontal positioning, enhances the productivity for the vertical and horizontal work. 7

8 BED TYPE UNIVERSAL MACHINING CENTER COMBI- U11 TABLE TRAVEL FEED SPINDLE MOTOR DESCRIPTION UNIT Table size (length width) T-slots (number width) No Distance between T-slots Max. permissible load Kg Longitudinal travel Cross travel Height from table to vertical spindle nose Height from table to horizontal spindle nose Axes feedrate /min Rapid feedrate /min Taper (7/24) ISO Speed (High-low 2steps) rpm Distance from column to vertical spindle center Distance from column to horizontal spindle center Spindle drive motor Feed drive motor Nm Coolant pump motor Chip screw motor Lubrication motor Hydraulic clamping motor Oil cooler Approx. machine net weight kg Floor space ( length width height) COMBI-U11 M-HEAD A2-HEAD 2660 / 3140 / / 2800 / ~1185(1200) -85~1115(1200) -5~1195(1200) 0~1200(1200) ~2000 1~ / 22 X : 30, Y : 40, Z : / 24000/ /8440/B The contents of the catalogue are subject to change without prior notice. STANDARD OPTIONAL 8 Fanuc 0i / Heidenhain TNC320 3 axis Linear Scale Hardened and ground slideway for 3 axis(longitudinal, cross and vertical) Cross slideway - X travel 2300 : 4 slideway - X travel 2800 / 3200 : 6 slideway Oil cooler Flood coolant system with tank and pump Telescopic chip cover for X, Y axis Chip screw in the rear of the bed Electronic handwheel Air blow Automatic power off with M function RS232C interface 24 ATC A2-Head Fanuc 31i / Heidenhain itnc530 Spindle orientation for rigid tapping Lift up chip conveyor Preparation of the continuous 4th axis Protection cover Splash guard on the table

9 DIMENSION CROSS TRAVEL A2-HEAD CROSS TRAVEL M-HEAD CROSS TRAVEL The contents of the catalogue are subject to change without prior notice. SPINDLE MOTOR 9 SPINDLE MOTOR : FANUC MOTOR 18i (18.5kw/22kw)

10 BED TYPE CNC UNIVERSAL MILLING MACHINE COMBI- U10 TABLE SIZE / TRAVEL (X-AXIS) 2300/2800/3200 (Y-AXIS) 1050 (Z-AXIS) 850 SPINDLE 2000rpm FANUC, HEIDENHAIN 10

11 SPINDLE MOTOR SPINDLE MOTOR : FANUC MOTOR 18i (18.5kw/22kw) OPTIONAL SPINDLE ORIENTATION (RIGID TAPPING) HEAD COOLING 11

12 BED TYPE CNC UNIVERSAL MILLING MACHINE COMBI- U10 TABLE TRAVEL FEED SPINDLE MOTOR DESCRIPTION UNIT COMBI-U10 Table size (length width) 2660 / 3140 / T-slots (number width) No 8 22 Distance between T-slots 125 Max. permissible load Kg 4000 Longitudinal travel 2300 / 2800 / 3200 Cross travel 1050 Height from table to vertical spindle nose 50~900 Height from table to horizontal spindle nose 60~910 Axes feedrate /min 5000 Rapid feedrate /min Taper (7/24) ISO 50 Speed (Low-High 2steps) rpm 2000(1-540, ) Distance from column to vertical spindle center 1000 Distance from column to horizontal spindle center 1010 Spindle drive motor 18.5 / 22 Feed drive motor Nm X:30 Y:40 Z:22 Coolant pump motor 0.25 Chip screw motor 0.4 Lubrication motor 0.1 Hydraulic clamping motor 1.1 Oil cooler motor 2.25 Approx. machine net weight kg / / Floor space (length width height) 6660/8440/ The contents of the catalogue are subject to change without prior notice. STANDARD OPTIONAL 12 Fanuc 0i / Heidenhain TNC320 3 axis Linear Scale Hardened and ground slideway for 3 axis(longitudinal, cross and vertical) Cross slideway - X travel 2300 : 4 slideway - X travel 2800 / 3200 : 6 slideway Oil cooler Flood coolant system with tank and pump Telescopic chip cover for X, Y axis Chip screw in the rear of the bed Electronic handwheel Air blow Automatic power off with M function RS232C interface Fanuc 31i / Heidenhain itnc530 Spindle orientation for rigid tapping Lift up chip conveyor Preparation of the continuous 4th axis

13 DIMENSION CROSS TRAVEL The contents of the catalogue are subject to change without prior notice. 13

14 BED TYPE CNC UNIVERSAL MILLING MACHINE COMBI- U 6 TABLE SIZE TRAVEL (X-AXIS) 1600 (Y-AXIS) 750 (Z-AXIS) 700 FANUC, HEIDENHAIN 14 COMBI-U6 is designed as economic CNC machine with 12 step manual gear change for spindle and 3 axis movement with CNC

15 TABLE TRAVEL FEED SPINDLE MOTOR DESCRIPTION UNIT COMBI-U6 Working surface (Length Width) T-slots (Number Width) No 5 20 Distance between T-slots 80 Max. permissible load Kg 2000 Longitudinal travel 1600 Cross travel 750 Height from table to vertical spindle nose 50~750 Height from table to horizontal spindle center 60~760 Axes Feedrate /min 4000 Rapid feed /min 8000 Taper ISO 50 No. of spindle speeds No. 12 Speed r.p.m 40~1600 Distance from column to vertical spindle center 700 Distance from column to horizontal spindle nose 710 Spindle drive motor 11 Feed drive motor Nm 12 Coolant pump motor 0.1 Lubrication pump motor 0.1 Hydraulic clamping motor 0.75 T-Rotor pump motor 0.1 Approx. machine net weight Kg 7500 Floor space(width length height) 4760 x 3450 x 3050 Packing size(width length height) The contents of the catalogue are subject to change without prior notice. DIMENSION 15 The contents of the catalogue are subject to change without prior notice.

16 VERTICAL MACHINING CENTER COMBI- V10 TABLE SIZE / TRAVEL (X-AXIS) 2300/2800/3200 (Y-AXIS) 1050 (Z-AXIS) 1100 TOOL MAGAZINE CAPACITY 40EA SPINDLE 6000rpm FANUC, HEIDENHAIN 16

17 SPINDLE MOTOR POWER GRAPH(KW) 4 : 1 [ZF4:1] SPINDLE MOTOR : a i(FANUC) ZF GEAR BOX AUTOMATIC TOOL CHANGER 17

18 VERTICAL MACHINING CENTER COMBI- V10 TABLE TRAVEL FEED SPINDLE MOTOR A.T.C DESCRIPTION UNIT COMBI-V10 Table size (length width) 2660 / 3140 / T-slots (number width) No 8 22 Distance between T-slots 125 Max. permissible load Kg 4000 Longitudinal travel 2300 / 2800 / 3200 Cross travel 1050 Height from table to vertical spindle nose 100~950/100~1200 Axes feedrate /min 5000 Rapid feedrate /min Taper (7/24) ISO BT 50 Speed (Low-High 2steps) rpm 6000(1-1500, ) Distance from column to vertical spindle center 1000 Spindle drive motor 20 / 26 Feed drive motor Nm X : 22, Y : 40, Z : 30 / X : 30 Coolant pump motor 2.6 Chip screw motor 0.4 Lubrication motor 0.1 Hydraulic motor 0.75 Oil cooler motor 2.4 Tool magazine capacity ea 40 Max. tool dia. 230 Max. tool length 350 Max. tool weight kg 20 Tool change time sec 8 Approx. machine net weight kg 21000/23500/25500 Floor space (length width height) 6600/8440/8900 x 4700 x 4070 The contents of the catalogue are subject to change without prior notice. 18 STANDARD Fanuc 31i / Heidenhain itnc tools vertical tool changer ZF gear box Spindle orientation for rigid tapping 3 axis Linear Scale Hardened and ground slideway for 3 axis(longitudinal, cross and vertical) 6 Cross slideway Protection cover Oil cooler Flood coolant system with tank and pump Telescopic chip cover for X, Y axis Chip screw in the rear of the bed Electronic handwheel Air blow Automatic power off with M function RS232C interface Splash guard on the table OPTIONAL Coolant through spindle Lift up chip conveyor Preparation of the continuous 4th axis

19 DIMENSION WORKING VOLUME The contents of the catalogue are subject to change without prior notice.

20 Cat No TEL: ~4 FAX: Web: KIHEUNG MACHINERY CO. LTD 43-1 moon pyung-dong, dae deog-gu, Daejeon, Korea TEL: ~4 FAX: Web: