SCORE SHEET - THINNING SHEAR
|
|
|
- Amberlynn Hall
- 5 years ago
- Views:
Transcription
1 SCORE SHEET - THINNING SHEAR Thinning Shear Your Comments Cut and Feel 100 Scissors cut entire length of blade pts if shear does not cut 1/2" or more -30 pts if shear does not cut 1/4" or more -20 pts if cut is ragged over 1/2". -10 pts if cut is ragged under 1/2" Tension and feel of cut 30-0 pts blade falls around perfect -5 pts: blade falls more than 11 or less than pts: blade falls to 12 or not at all up to -20 pts for the "feel" of too tight or loose -30 "cut" feels smooth not rough 30 Edge Work 40 No excess metal removal 20-5 pts: removed too much metal from back of edge -5 pts: removed too much metal from tip of shear -10 pts: created a syckle edge Edged through 10-5 pts: not edged through along 1/2" or less -10 pts: not edged through along 1/2" or more Edge angle pts: edge angle under degrees
2 SCORE SHEET - THINNING SHEAR Thinning Shear Your Comments -10 pts: edge angle over degrees Hone Lines pts: not honed through to edge -10 pts: hone line is not even, 50% wider or narrower than the rest -10 pts: hone line has multiple angles or rounded -10 pts: hone on spine for over 1/4" Convexing smooth convex not beveled -10 highly polished no scraches Finish and Apperance pts: tips overlap too much or too little -5 pts: handles not aligned -10 pts: tips too pointy or scratchy -10 pts: blemishes and scratches anywhere -5 pts: bumper not placed correctly 250
3 SCORE SHEET - RIGHT-HANDED SLIDE CUTTING SHEAR Right-Handed Slide Cutting Shear Your Comments Cut and Feel 100 Scissors cut entire length of blade pts if shear does not cut 1/2" or more -30 pts if shear does not cut 1/4" or more -20 pts if cut is ragged over 1/2". -10 pts if cut is ragged under 1/2" Tension and feel of cut 30-0 pts blade falls around perfect -5 pts: blade falls more than 11 or less than pts: blade falls to 12 or not at all up to -20 pts for the "feel" of too tight or loose -30 "cut" feels smooth not rough 30 Edge Work 40 No excess metal removal 20-5 pts: removed too much metal from back of edge -5 pts: removed too much metal from tip of shear -10 pts: created a syckle edge Edged through 10-5 pts: not edged through along 1/2" or less -10 pts: not edged through along 1/2" or more Edge angle 10
4 SCORE SHEET - RIGHT-HANDED SLIDE CUTTING SHEAR Right-Handed Slide Cutting Shear Your Comments -10 pts: edge angle under degrees -10 pts: edge angle over degrees Hone Lines pts: not honed through to edge -10 pts: hone line is not even, 50% wider or narrower than the rest -10 pts: hone line has multiple angles or rounded -10 pts: hone on spine for over 1/4" Convexing smooth convex not beveled -10 highly polished no scraches Finish and Apperance pts: tips overlap too much or too little -5 pts: handles not aligned -10 pts: tips too pointy or scratchy -10 pts: blemishes and scratches anywhere -5 pts: bumper not placed correctly 250
5 SCORE SHEET - LEFTY SLIDE CUTTING SHEAR Lefty Slide Cutting Shear Your Comments Cut and Feel 100 Scissors cut entire length of blade pts if shear does not cut 1/2" or more -30 pts if shear does not cut 1/4" or more -20 pts if cut is ragged over 1/2". -10 pts if cut is ragged under 1/2" Tension and feel of cut 30-0 pts blade falls around perfect -5 pts: blade falls more than 11 or less than pts: blade falls to 12 or not at all up to -20 pts for the "feel" of too tight or loose -30 "cut" feels smooth not rough 30 Edge Work 40 No excess metal removal 20-5 pts: removed too much metal from back of edge -5 pts: removed too much metal from tip of shear -10 pts: created a syckle edge Edged through 10-5 pts: not edged through along 1/2" or less -10 pts: not edged through along 1/2" or more Edge angle pts: edge angle under degrees
6 SCORE SHEET - LEFTY SLIDE CUTTING SHEAR Lefty Slide Cutting Shear Your Comments -10 pts: edge angle over degrees Hone Lines pts: not honed through to edge -10 pts: hone line is not even, 50% wider or narrower than the rest -10 pts: hone line has multiple angles or rounded -10 pts: hone on spine for over 1/4" Convexing smooth convex not beveled -10 highly polished no scraches Finish and Apperance pts: tips overlap too much or too little -5 pts: handles not aligned -10 pts: tips too pointy or scratchy -10 pts: blemishes and scratches anywhere -5 pts: bumper not placed correctly 250
7 SCORE SHEET - GERMAN TYPE CORRUGATED BEVEL German Type Corrugated Bevel Your Comments Cut and Feel 100 Scissors cut entire length of blade pts if shear does not cut 1/2" or more -30 pts if shear does not cut 1/4" or more -20 pts if cut is ragged over 1/2". -10 pts if cut is ragged under 1/2" Tension and feel of cut 30-0 pts blade falls around perfect -5 pts: blade falls more than 11 or less than pts: blade falls to 12 or not at all -20 pts for the "feel" of too tight or loose -30 "Cut" feels smooth not rough 30 Edge Work 40 No excess metal removal 20-5 pts: removed too much metal from back of edge -5 pts: removed too much metal from tip of shear -10 pts: created a syckle edge Edged through 10-5 pts: not edged through along 1/2" or less -10 pts: not edged through along 1/2" or more Edge angle pts: edge angle under degrees
8 SCORE SHEET - GERMAN TYPE CORRUGATED BEVEL German Type Corrugated Bevel Your Comments -10 pts: edge angle over degrees Hone Lines pts: not honed through to edge -10 pts: hone line is not even, 50% wider or narrower than the rest -10 pts: hone line has multiple angles or rounded -10 pts: hone on spine for over 1/4" Corrugation pts: over 1/2" not corrugated through to edge -5 pts: not even along bevel -5 pts: too course under 40t per inch Finish and Appearance pts: tips overlap too much or too little -5 pts: handles not aligned -10 pts: tips too pointy or scratchy -10 pts: blemishes and scratches anywhere -5 pts: bumper not placed correctly 250
Chisels. A set of Dovetail Paring chisels from Blue Spruce Toolworks (www.bluesprucetoolworks.com).
7 Chisels CHISELS MAKE UP A LARGE AND IMPORTANT part of the woodworker s tool kit. The apparent simplicity of a chisel a blade on a stick belies the numerous variations on that theme. At the very least,
Ball-Joint Scrapers Steel Blade Carbide Blade 05K K21.04
Ball-Joint Scrapers Steel Blade Carbide Blade 05K21.01 05K21.04 The Veritas Ball-Joint Scraper is based on a tool originally made by L.S. Starrett Tool Company but out of production for many years. Originally
THE BLADESHARPENER OWNERS MANUAL
THE BLADESHARPENER OWNERS MANUAL Photo shows knife in 100mm flip over. All parts will interchange. Note: Wedge attachment left of photo and sharpening stones are not included. 1 BLADESHARPENER WITH FLIPOVER
UBC LIBRARY: CIRCULATING BOOK REPAIR PROCEDURES
UBC LIBRARY: CIRCULATING BOOK REPAIR PROCEDURES AUGUST 2011 1. BOOK TERMINOLOGY...3 2. BOOK REPAIR TRIAGE LEVELS (1-3)...4 WEB RESOURCES... 4 BOOKS... 5 3. REPAIR PROCEDURES LEVEL 1...6 1. DRY CLEAN/SURFACE
Square Edge Jig SE-77 (SE-76)
Square Edge Jig SE-77 (SE-76) PLANE IRONS WOOD CHISELS Max width 77 mm (3") Max thickness 9 mm (⅜") SE-77 is a further development of SE-76. The jig now has an adjustable side. Positioning of Machine Grinding
Knife Jig SVM-45 (60533)
Knife Jig SVM-45 (60533) KNIVES Min length of blade 60 mm (2 "). CARVERS DRAW KNIVES Positioning of Machine Note The height of the bench must not be too high when grinding knives. 550 650 mm (22 26") is
Turning an End Grain Lidded Box
Turning an End Grain Lidded Box by Michael Stafford Copyright 2006 All Rights Reserved 1 Turning an End Grain Lidded Box Turning an end grain lidded box differs from face grain bowl turning primarily in
McCue Bumper Installation Instructions
McCue Bumper Installation Instructions McCue 8" Bumper Tools Required: Saw with 10-12" blade Tape measure Flat head screwdriver Phillips screw driver Pencil or chalk line Drill with Philips driver bit
Page 1 of 5 Application Engineering Note Proc. 001 Interlock Armor and Corrugated Steel Tape Cables Pulling Grip Installation Procedure Rev.
Page 1 of 5 Scope: The scope of this procedure is to describe how to properly install a cable pulling grip on an Optical Cable Corporation interlocked armor (ILA) and corrugated steel tape (CST) fiber
MAT MASTER TM SYSTEMS
FrameCo MAT MASTER TM SYSTEMS #14225 BEVEL MOUNT CUTTERS Welcome and thank you for purchasing a FrameCo Mat Master System. Through these instructions we will endeavour to show you the benefits of the system
Hubble Space Telescope Paper Model Directions Downloads, patterns, and other information at:
Hubble Space Telescope Paper Model Directions Downloads, patterns, and other information at: www.hubblesite.org/go/model Materials: model pattern printed onto cardstock/coverstock instructions printed
Gently slide the roundnose chisel on the tool rest and into the grinding wheel. Like you practiced, pivot the chisel to grind the bevel.
Set the roundnose chisel, bevel down on the tool rest. Slide the chisel forward until the center of the chisel touches the grinding wheel (Figure 24-21). With the machine "OFF" prac-tice pivoting the roundnose
TURNING TOOLS CARVING TOOLS
Multi Jig SVS-50 (37592) TURNING TOOLS Square and skew chisels with straight or curved edges. Max width 32 mm (1¼"). Parting tools Beading tools Roughing gouges Max width 50 mm (2"). CARVING TOOLS Gouges,
Making Bassoon Reeds (Eryn Oft Style, using Rieger 1A shape GSP cane)
Hand- Gouge, Fold, and Bevel: 1. Soak cane and twine for 1 hour. Making Bassoon Reeds (Eryn Oft Style, using Rieger 1A shape GSP cane) 2. Wrap 400- grit wet/dry sandpaper around a wine cork and sand inside
EZESHARP Blade Sharpener OWNERS MANUAL
EZESHARP Blade Sharpener OWNERS MANUAL Photo shows knife in 100mm flip-over. All parts will interchange. Note: Wedge attachment (left of photo) for multipurpose use We Supply a wide selection of Dexter,
tools cutters 524 orderline: larsson side cutters, larsson end cutters tools
cutters larsson side cutters, larsson end cutters Side Cutters: 999 720 Diagonal cutters, pointed jaws (3054) flush cut for wire Ø 0.35-1.00mm 29.75 999 721 Diagonal cutters pointed jaws (3055) regular
HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC
HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC 3c-H-101 HEALTHCO Precision Straight Tip Tweezer 9.0 mm -.355 in. l-h-109 HEALTHCO High Precision Straight
Side Rabbet Plane 05P44.01
Side Rabbet Plane 05P44.01 U.S. Des. Pat. D596,475 The side rabbet plane is a specialty plane used for cleaning up or trimming the sidewalls of rabbets, dadoes or grooves to ensure a perfect fit with the
SCULL HANDLES AND GRIPS INSTRUCTION BOOKLET
SCULL HANDLES AND GRIPS INSTRUCTION BOOKLET Contents Section I: Scull Grip Replacement: Fixed Handle or 10 cm Length Adjustment System Refer to this section if you need to replace the grips on your fixed
Top Polishing Instructions
Top Polishing Instructions Materials Needed: For 2014 - Recommend Metabo PE12-175 7" Polisher NSI Solutions 300 grit turbo pad NSI Solutions 500 grit turbo pad NSI Solutions 1000 grit turbo pad NSI Solutions
The Cribbage Guy Guide to Templates
The Cribbage Guy Guide to Templates This is a quick guide to creating a cribbage board from one of our electronic templates. Getting Your Template When you purchase your electronic template from us at
Mixed Metal Heart Author: Patti Bullard Ph.D.
Mixed Metal Heart Author: Patti Bullard Ph.D. Mixed Metal Heart Difficulty: Easy The beauty of mixed metals paired with a traditional heart shape is sure to bring joy to the jewelry maker as well as the
Exterra Installation Guide
Exterra Installation Guide Installing the foam padding Please review this installation guide before you begin installing the floor. If you have any questions, please call us at 800-428-5306 any time Monday
Woodworking Boot Jack
Woodworking Boot Jack Name: Date: Description: Students will create boot jacks from wood supplied by the shop. The proper tools used for this project will be listed and demonstrated for proper use by the
Guild of Oregon Woodworkers Shop Safety Test
Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the
Traditional Wall Mounted Potfiller
TOOLS NEEDED FOR INSTALLATION 1/4 hex wrench (provided in installation kit) 3/32 hex wrench (provided in installation kit) Pencil or marker PTFE tape Small level, or carpenters square Power Drill with
Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12
XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated
Written, with illustrations, to help the beginner to novice learn to sharpen and start their own highly profitable business.
This booklet was written in an effort to guide the novice sharpener to get started, It is not intended as a replacement for 1 on 1 training. Contact me at: scissortek@hotmail.com or 315-246-4620 to schedule.
MAT MASTER TM SYSTEMS
FrameCo MAT MASTER TM SYSTEMS #14225 BEVEL MOUNT CUTTERS Welcome and thank you for purchasing a FrameCo Mat Master System. Through these instructions we will endeavour to show you the benefits of the system
Bolt-On Fender Flares Nissan Titan XD (16-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included Extrusion 30.5ft (Bolt-On look flare only) QTY U CLIP.6mm 6 Nuts
SAFETY TIPS. Always unplug the Revolution XT from its power source before removing it from the water bath or when performing any maintenance.
SAFETY TIPS Always unplug the Revolution XT from its power source before removing it from the water bath or when performing any maintenance. Always wear safety glasses when the saw is in operation. NEVER
Operator s Manual. Onion King 500N 501N 502N 503N ENGLISH
Onion King 500N 501N 502N 503N Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions.
Dusty Harp Pickup for lever harps
q P10 for 24 30 string harps q P20 for 32 40 string harps Dusty Harp Pickup for lever harps Installation Kit Contents and Diagram of Pickup A. Pickup Element B. Grommet C. Pickup Harness D. Jack E. F.
The Original Wing Mailer Care & Operation
Care & Operation Since its invention in the 1880 s, the hand-operated original has been the mainstay of newspaper mailrooms, the tried-and-true workhorse that can be used on its own or as a back-up for
Explanation Drawings of Counterweights Assembly
Explanation Drawings of Counterweights Assembly (1) At first, make bend lines on the template and then cut the center of the cutting lines as much as possible. (2) Do not immediately apply paste. Check
MOTOR & BULK HEAD. A Manual for Repair and Maintenance Technicians
MOTOR & BULK HEAD A Manual for Repair and Maintenance Technicians CAUTION This manual is designed to help technicians who are already experienced in workshop procedures and know how to handle tools. Only
Hand Tools. 1. Marking Out Tools
Hand Tools 1. Marking Out Tools Steel Rule Used for measuring Measure twice, cut once, golden rule of woodwork Rule should begin from the edge of the metal Millimetres are used, nothing else will do 10mm
DEKKA TAPE HEAD MODEL 22, 23 & 215 OPERATION & SERVICE MANUAL /07/06
DEKKA TAPE HEAD MODEL 22, 23 & 215 OPERATION & SERVICE MANUAL 69-01-5 12/07/06 DEKKA 22 / 23 / 215 TAPE H EAD 2 TABLE OF CONTENTS Figure 1 - DEKKA 22 (2") Tape Head Mounting Layout...4 Figure 2 - DEKKA
GENERAL NOTES: Page 1 of 9
Laminating A Zia Into A Turning Blank by W. H. Kloepping, Jan. 2009 This describes how a zia (the New Mexico state symbol) can be laminated into a turning blank. Materials needed: Square Turning Block
Basic steps to time the Gammill quilting machine s rotary sewing hook
Basic steps to time the Gammill quilting machine s rotary sewing hook 1.) Turn the machine off and unplug it. 2.) With the needle bar in the raised position, remove the bobbin and bobbin case. 3.) Remove
The Archer Bow Press OPERATING INSTRUCTIONS Partridge Woods Elk Rapids, MI
The Archer Bow Press OPERATING INSTRUCTIONS 8203 Partridge Woods Elk Rapids, MI 49629 www.bowforcearchery.com 1 MAINTENANCE AND FINE TUNING Horizontal Pulling Bar The Horizontal Pulling Bar has a break-in
Inlay String Thicknesser
Inlay String Thicknesser 05P32.10 The Veritas Inlay String Thicknesser is used to scrape veneer or inlay string to a desired thickness. Unlike a conventional scraper, the sole of this tool does not bear
T he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The
Double-Hung Replacement System Installation The Pozzi Collection PID001 (12/03) T he Double-Hung Replacement System replaces the sash and balance system of an older double-hung window. The frame of the
Thorvie Instructions Always wear eye protection and do not wear loose clothing when operating machinery. FOR AV- 41 ICE AUGER MACHINE
FOR AV- 41 ICE AUGER MACHINE 1. Please study video and all instructions before proceeding to grind. For Mora, Jeffy and Eskimo blades use the 6 brown resin bond wheel. Mount with washer and left-hand nut
MUDGUN Drywall Finishing System
Watch the demonstration video online at hydetools.com MUDGUN Drywall Finishing System Quick Start Guide Hyde Tools, Inc. / A Hyde Group Company / 800-872-4933 / custrelations@hydetools.com / hydetools.com
Bullnose Plane 05P42.01
Bullnose Plane 05P42.01 Patent Pending The Veritas Bullnose Plane, perfect for cleaning up machine-cut joints, will be one of the most useful hand joinery tools you ll ever own. Designed for maximum versatility,
BASIC DAFO ADJUSTMENTS
Our goal is to have each DAFO fit your patient right out of the box. Some minor adjustments may be necessary to assure long term comfort. The following are some simple adjustments that will help fine tune
RTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
Gouge Jig SVD-186 (SVD-186)
Gouge Jig SVD-186 (SVD-186) TURNING TOOLS Bowl gouges Spindle gouges Turning cutters CARVING TOOLS Curved gouges Spoon-shaped gouges Back bent gouges Down bent gouges Curved V-tools Max tool width 36 mm
SCREEN MAKING PROCESS
Silkscreening is highly suitable for home printing, whether it is a series on paper, a set of T-shirts, team jackets or vinyl printing on plastic. It is possible to temporarily create a home print shop
Technicians of Terror. This is the air valve we make to use with our air
These are pictures of our scissor prop. Technicians of Terror http://www.halloweenfear.com/scissorprop.html props. This is the air valve we make to use with our air This pictures the duel door closer cylinders
Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades
Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades by Duane Strosaker Choosing the Wood Two 3/4" pieces of Sitka spruce laminated with epoxy for an unfeathered one-piece paddle. For
Virgil Barnes Purdue University
MIRROR-FINISH? STAINLESS STEEL TUBES FOR GAS CHERENKOV CALORIMETRY Virgil Barnes Purdue University With Alvin Laasanen and Matthew Barrett NLC meeting, SLAC, January 2004 OUTLINE Overview Description of
(2) 25mm x 20mm x 5mm Adhesive Backed Foam Pads. 100mm x 50mm x 1.0mm Adhesive Backed Foam. (2) Spacer Plates. Passenger/Right Side Frame Mounting
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Frame Mounting 16 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting 8 12mm Hex Nuts 1 Driver/Left Side Top Support 2 10-1.50mm
By Laurie Pessetto. Skill Level: This is a simple pattern and easy to sew. The challenge if using a plush fabric will be the nape.
By Laurie Pessetto Stuffed animals are a favorite comfort toy and playmate. This 25 dinosaur is cuddly, and yet sturdy enough to stand alone. The fabric is stretchy, soft and smooth with a nice feel. Pick
Plug-n-Show Stake Down Pixel Tree Kit 16 strips of 25 pixels Assembly Instructions
www.lightorama.com Plug-n-Show Stake Down Pixel Tree Kit 16 strips of 25 pixels Assembly Instructions Read all instructions before you start Kit assembly! STEP 1. Check that all parts are included Parts
Tool Rest SVD-110 (60483) Positioning of Machine
Tool Rest SVD-110 (60483) TURNING SCRAPERS Round nose Square end Curved CARVING SCORPS AND INSHAVES CABINET SCRAPERS HOLLOWING TOOLS SCREW DRIVERS Positioning of Machine Grinding direction: away from or
CARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
MACHINE SEW HOW TO POT HOLDER. Project
GET TO KNOW YOUR ING BY TRYING OUT THE VARIOUS STITCHES AVAILABLE, THEN TURN YOUR STITCH SAMPLER INTO A USEFUL. CUSTOMIZE YOUR PROJECT BY CHOOSING YOUR OWN FABRIC AND MATCHING OR CONTRASTING THREAD COLOURS.
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
Zenterra TM Installation Guide
Zenterra TM Installation Guide Installing the foam padding Please review this installation guide before you begin installing the floor. If you have any questions, please call us at 800-428-5306 any time
CarBee-Sharp. Construction
CarBee-Sharp Congratulations on your purchase of the new CarBee-Sharp multi-head pocket carbide sharpener. CarBee-Sharp is the most convenient sharpener you will ever own. CarBee-Sharp is so small and
Improving Edge Quality in Film Applications with Tangent Shear Slitting
Improving Edge Quality in Film Applications with Tangent Shear Slitting Presented by: Sean Craig General Manager, Maxcess-Tidland Date: October 17, 2017 What is Fracture Mechanics? The study of how things
Max Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont
Flying Model Parts List Max Launch Abort System Prod. No. 3014 A 11820 - Body Tube 3.5 Diam x 5.5" Long B 11824 - Orange Capsule Base Shoulder Ring C 16032 - Laser-cut Ring motor mount rear D 16033 - Laser-cut
Lapping Plate 05M20.20
Lapping Plate 05M20.20 U.S. Des. Pat. D593,140 Lapping is the process of rubbing two surfaces together with an abrasive and a lubricant to improve the quality of at least one of the surfaces. Although
Catalog October Speedi-Sleeve The quickest and most economical way to repair worn shafts
Catalog 457027 October 2005 Speedi-Sleeve The quickest and most economical way to repair worn shafts Table of Contents The Speedi-Sleeve concept...3 SPEEDI-SLEEVE, the quickest and most sensible way to
Tool Geometry And the Cutting Edge. By Lyndal Anthony Photography by Joan Overhouse
Tool Geometry And the Cutting Edge By Lyndal Anthony Photography by Joan Overhouse "Insanity is doing the same thing over and over again but expecting different results. Quote first appears in the book
Installation Instructions. Oakmont Folding Doors
Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free
3555 Scarlet Oak Blvd. St. Louis, MO FAX:
I. INSTALLATION TOOLS A. Utility Knife B. Scissors C. Sand Paper and/or File D. Fabric Tucking Tools (available from Fabric Wall) 1. Rocker Tool 2. Flat Blade with round edge 3. Bent Blade with round edge
Drop Spine Box. Tricia Morris. Design by: 2006 Craft TV Weekly, Inc.
Drop Spine Box Design by: Tricia Morris 1 Think inside the box! In a marathon of gluing, folding and smoothing, Tricia shows how to make a Drop Spine Box. The steps are many, but the reward is great! So
Follow the numbered instructions that correspond to an illustration below:
Folded Christmas Star Materials needed: Colored or white paper X-acto knife and cutting mat or scissors Ruler Patience and practice :) Instructions Follow the numbered instructions that correspond to an
PT50A Industrial, PT50B & PT50C Sharp
Instructions For Use of Your PT50A Industrial, PT50B & PT50C Sharp Edge Sharpness Tester manufactured by Pictured PT50B Thank you for purchasing a PT50 Series Sharp. From now on you will know with precision
Fortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
Model 750 Illustrated Installation Instructions Contractors Wardrobe
Model 750 Illustrated Installation Instructions Contractors Wardrobe DESIGNERS MANUFACTURERS 26121 Avenue Hall Valencia, CA 9155 (661) 257-77 Fax: (661) 257-4907 Toll Free: (800) CW-DOORS (800) 29-6677
Making a Greenland Paddle - New Zealand style
Making a Greenland Paddle - New Zealand style ~by Sandy Ferguson The following describes how to make a paddle reasonably easily and with as little wastage as possible. This could be your first Greenland
September 10, 2009 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
September 10, 2009 Page 1 PRODUCT FEATURES BASIC USES/RELATED USES Interior decorative tile. Architectural tile for decorative wall surfaces, backsplashes and other applications. Custom architectural and
CAUTION- SAVE THESE INSTRUCTIONS This product is for household use, or equivalent.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, dropped into water. Return this sewing machine to the nearest authorized
WOODWORKING GUIDE: BASIC JOINERY
WOODWORKING GUIDE: BASIC JOINERY Close isn't really good enough. A perfect fit is what counts. When building furniture, there are many ways to construct joints. The simplest are those that use mechanical
How to Mitre Mouldings
How to Mitre Mouldings About Window and Door Mouldings Mitre cuts are a basic operation in most moulding installation. Mitre cuts are typically 45 degree angles, however many installations require minor
Casting Tool Kit, from Jewelry Television. Introduction. Tools That Come With The Casting Kit
Tools That Come With The Casting Kit 1. 2. 3. 4. Stone Setting Pliers Pin Vise Prong Lifter 80mm Brass Gauge 5. 6. 7. 8. Tweezer Burnisher Prong Pusher Ring Clamp Casting Tool Kit, from Jewelry Television
Storing, Handling, and Cutting Steel Panels
Storing, Handling, and Cutting Steel s Storing Specifically check your quantities, colors, and lengths All materials should be used as soon as possible Steel bundles should be stored indoors with enough
Cardstock Gift Card Holder
Give gift cards a personal touch with a beautifully decorated holder! This embroidery design is specially digitized for cardstock, with light and open stitching. Sparkling metallic thread and a sleek closure
Planer Blade Attachment SVH-320
Planer Blade Attachment SVH-320 (60517) HSS PLANER BLADES Copes with any length. Min width (a) 13 mm (½"). Tungsten carbide blades cannot be ground. MITRE GUILLOTINE BLADES Positioning of Machine Grinding
1 SELECT suitable material. It takes time to cut a cab. Don t waste it on rubbish.
7 July 09 CUTTING A STANDARD CABOCHON A Standard Cabochon or CAB is an oval or round stone with one flat side and the other side having an even curved dome shape. Top of Cab It will have a narrow bevel
Instruction Manual. Banner Grip -banner stretching frame. Manual Version Sept27, Any size made: by Graphic size, OD Size, Live Area -1 or 1,000!
Instruction Manual Banner Grip -banner stretching frame Above: Open frame to reveal clamps pulling banner tight. Above: Closed frame to conceal all mounting hardware, NICE! Manual Version Sept27, 2012
ÉTude. Ann Van Hoey s. by Andrea Marquis
Ann Van Hoey s ÉTude Géométrique by Andrea Marquis The work of Belgian artist Ann Van Hoey consists of sculptural earthenware vessels and a line of bone-china dinnerware that she designs for the European
Turkey Football Panel
Turkey Football Panel PROJECT TITLE: Turkey Football Turkey Football Panel A Stained Glass Project DESIGNED BY: Jeanne Baruth for Diamond Tech SKILL LEVEL: (Adult 1-5 1 being the easiest, 5 being difficult)
You should have received the following contents in the package:
Greetings, and thank you for purchasing a center stand for your V-Strom from Murphs! We strive to provide quality products at a fair price, and hope you agree we do it well. Whether you purchased a stand
Technical Tips. Using Bundle Breaker (rotary corrugated applications) In General, bundle breaker rule is determined based on the following criteria:
Technical Tips 080215_BBarticle Using Bundle Breaker (rotary corrugated applications) Bundle Breaker: a mechanical device designed specifically to separate ganged, multiout sheets after they have been
Preliminary Version. Working with the Blade of the Opus1 Gouger Robin Driscoll October 2003
Preliminary Version Working with the Blade of the Opus1 Gouger Robin Driscoll October 2003 One of the most interesting aspects of the Opus1 Gouger is the multitude of adjustments that are now easily in
Small Plow Plane. U.S. Des. Pat. No. D591,579
Small Plow Plane U.S. Des. Pat. No. D591,579 The Veritas Small Plow Plane is a joinery plane, perfect for cutting grooves, such as used for drawer and box bottoms, cabinet backs, and frame-and-panel construction.
Restoration Project / Cable upright Photographic Journal Page 27
Restoration Project / Cable upright Photographic Journal Page 27 Photo 51: With the case work done, keytops are the next project to tackle. I had neglected to get a good before picture of the keys, but
Colori. Part I Geometry
Colori Part I Geometry 1 2 Determine the size of your cane. TOOLS & MATERIALS FOR BUILDING A CANE: - photocopy paper - ruler - pen or a black marker - color markers (optional) - pasta machine - clay of
Chirping Bird. Have the students draw a bird or give them a pattern of a bird to cut out.
Chirping Bird Category: Physics: Sound & Waves, Force & Motion Type: Make & Take Rough Parts List: 1 Straw 1 Bamboo skewer or 1/8 dowel 1 Nail 1 Bookmark or small stiff paper 1 File folder or stiff paper
UNDERSTANDING THE IMPORTANCE OF PUNCH LENGTH AND CUP DEPTH
WHITEPAPER UNDERSTANDING THE IMPORTANCE OF PUNCH LENGTH AND CUP DEPTH { Manufacturing tablets to a uniform hardness, weight, and thickness requires tablet press punches of consistent length. We will describe
Hybrid Diamond Hone. Knife Sharpener Model 25 INSTRUCTION MANUAL
INSTRUCTION MANUAL Hybrid Diamond Hone Knife Sharpener Model 25 Read instructions before use. It is essential that you follow these instructions to achieve optimal results. IMPORTANT SAFEGUARDS When using
PRACTICAL STITCHES. Threading. Thread knotting
Threading PRACTICAL STITCHES As sewing is based on needlework, the first lesson should be in threading and handling the needle. Thread dark thread into the needle against a light background and light thread
A Beginner s Guide to Changing Guitar Strings. Written by Joshua Kukorlo
A Beginner s Guide to Changing Guitar Strings Written by Joshua Kukorlo SNAP! Your B string just broke and you begin to freak out. Now what? If you ve never changed the strings on your guitar before this
Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver.
Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver. He started by roughing out the block with a roughing
Care of Bonsai Tools
Technical Care of Bonsai Tools Written, Illustrated, and First Published in the 1960's by John Patrick of the New Orleans Bonsai Society First Reprinted in the Journal in March, 1987 Edited by Norman Haddrick