Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
|
|
- Andra Baldwin
- 5 years ago
- Views:
Transcription
1 Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T
2 Welcome to the 2014/2015 catalog Dear customer, Thank you for your interest in CMT products. Browse our new catalog at your leisure and choose from a wider range of innovative and state-of-the-art woodworking tools, from router bits and sets, saw blades, CNC cutters, cutter heads, chucks, boring bits,, and many more. A detailed list of spare parts on each product category is also provided to guide you through your purchase. We continually strive to develop our technical know-how and invest in research and development, but our priority is customer care. A satisfied customer is worth more than any other achievements, therefore each page of this catalog contains CMT s highest dedication to the professional woodworker. hould you not find a product that is fitting your needs, please let us know. Our highly skilled engineers and operators are eager to design it for you to assist you with your woodworking operations. Thank you for your interest in CMT Orange Tools. Your CMT Team
3 Abbreviations A = Cutting angle α = Hook angle ATB = Alternate top bevel grind B = Bore diameter β = Type of grind C = Bearing diameter COMBI3 = Pin-Hole 2/7/42 + 2/9/46,4 + 2/10/60 COMBI5 = Pin-Hole 2/7/ /8,4/ /14/ /9/ /19/120 COMBI7 = Pin-Hole 2/10/80 + 1/11/85 + 2/11/ /11/ /14/ /14/ /19/120 D = Diameter D2 = Overall diameter = For shank diameter Ø = Diameter d = mall cutting diameter FFT = Flat flat trapezoidal FTG = Flat top grind FWF = Flat with alternate chamfer H = Cutting depth HDF = Hollow ground teeth I = Cutting length I1 = Cutting length I2 = Cutting length Inches = Inches K = Kerf thickness L = Overall length LB = Adjusting length = MATB = Alternate top bevel with chamfer grind MTCG = Triple chip grind (trapezoidal) with chamfer = Millimeters P = Plate thickness PTFE = Non-stick industrial coating, black and orange R = Radius R1 = Radius = RPM = Round per minute = hank diameter T1 = Thickness / Maximum joint thickness TCG = Triple chip grind (trapezoidal) V = purs Z = Number of teeth = On request = olid tungsten carbide
4 s PRODUCT PAGE Universal assembly supports for chucks 190 CNC chucks 190 ~ 194 Precision collets Cutter arbor MK2 chucks 197 olid carbide spiral bits 198 ~ 204 CNC straight cutters 205 ~ 213 CNC profiled cutters 213 ~ 217 lot & mortise bits 218 ~ 224
5 aw blades Precision chucks and collets The ideal accessories for machining centres, point-to-point machines and CNC routers. - extreme precision and reliability; - perfect tool centering; - defect-free rotation; - made from extremely high resistant steel; - precision grinding on all jointed parts; - extreme high rotation performance >= 15 HP RPM; - interchangeable collet clamps with radial grooves for secure parallel tool clamping; - wide clamping tolerance (-0.7); - right or left-hand rotation chucks with self clamping threads; - clamping nut with Woodruff radial grooves for c-spanners; - practical withdrawal sleeves with double differential threads for the chuck spindle; - for very efficient sizing on extreme unprecedented high feed speed; - excellent finishing quality on the workpiece and longer tool life; - sturdy design with reduced height to increase the work space between the machine and the piece; - safe and fast tool setup; - central hexagonal low profile for easy tool clamping through a c-spanner; - designed and tested in collaboration with the most renowned machining and CNC router construction centres; - delivered in a smart professional packaging. Universal assembly supports for chucks 183 DECRIPTION D Universal assembly supports for chucks HK-F HK Universal assembly supports for chucks IO IO For HK-F63 and IO30 chucks CMT now offers new universal assembly supports for HK-F63 and IO30 chucks. Thanks to the bidirectional roller bearings, which clamp the tooolder to the flange, the system offers the highest protection to the tool taper and clamps are no longer needed. The special bidirectional roller bearing clamps the tooleft-hand rotationolder to the flange, offering the highest protection to the tool taper. D HK chuck for ER32 precision collets new DECRIPTION For Homag, Eima from 9/94, Dubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines. HK-F63 Clamping nut without bearing ER HK-F63 Clamping nut with bearing ER * * uitable for right-hand and left-hand rotation. 190
6 IO30 chucks for ER32 precision collets Retaining stud IO 30 ER32 Ø For Biesse machines Retaining stud IO 30 ER32 Ø For Biesse machines with Omlat engine, Bulleri, Busellato, CM and IMA machines Retaining stud IO 30 ER32 Ø12, For Alberti and Masterwood machines. IO30 chucks for ER32 precision collets Retaining stud IO 30 ER32 Ø8, For Morbidelli and CM machines. aw blades Ø Retaining stud IO 30 ER32 Ø8, For Morbidelli and CM machines (with aluminium flange already assembled Ø69,5). * Retaining stud and aluminium flange DECRIPTION 55 Ø50 Ø69,5 Ø69,5 aluminium flange
7 aw blades Chucks for ER32 precision collets /100 MK2/MK3 tapered shank MK2/M30x1,5 ER MK3/M30x1,5 ER Chucks for ER32 precision collets For machines with P Leuco system. Retaining stud Ø25x55 ER32 P LEUCO Clamping nuts for chucks with ER32 collets M40x1,5 Ø C-panner for ER32 precision collets DECRIPTION DECRIPTION Clamping nut without bearing For /100/200/250/300/400 chucks Clamping nut with bearing For /100/200/250/300/400 chucks C-panner for ER32 precision collets
8 HK chucks for ER40 precision collets new DECRIPTION HK-F63 Clamping nut without bearing ER HK-F63 Clamping nut with bearing ER * * uitable for right-hand and left-hand rotation. For Homag, Eima, IMA from 9/94, Dubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines. aw blades IO30 chucks for ER40 precision collets For Biesse machines For Biesse machines with Omlat engine, Bulleri, Busellato, CM and IMA machines For Alberti and Masterwood machines. Retaining stud Retaining stud Retaining stud IO30 ER40 Ø IO30 ER40 Ø IO30 ER40 Ø12, Clamping nuts for chucks with ER40 precision collets M50x1,5 Ø C-spanner for ER40 precision collets DECRIPTION Clamping nut without bearing For /211/221/310 chucks Clamping nut with bearing For /211/221/310 chucks DECRIPTION C-panner for ER40 precision collet
9 aw blades HK chuck for DIN6388 precision collet DECRIPTION HK-F63 HK chuck with bearing nut DIN * pare parts Clamping nut with bearing * uitable for left-hand rotation too. For Homag, Eima from 9/94, Dubus, Weeke, Biesse, CM, Morbidelli & Masterwood machines. DIN6388 precision collets inches / / inches / Clamping nuts M48x2 Ø DECRIPTION Clamping nut without bearing Clamping nut with bearing For chuck C-panner for DIN6388 & ER DECRIPTION C-panner for Usag
10 Precision collets ,5 3 new TECHNICAL DETAIL: - replaceable td ER11 collets (from 1 to 7) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. 184.xxx xxx new , , TECHNICAL DETAIL: - replaceable td ER20 collets (from 3 to 12,7) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. 27, new TECHNICAL DETAIL: - replaceable td ER16 collets (from 1 to 10) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. TECHNICAL DETAIL: - replaceable td ER25 collets (from 6 to 16) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. 184.xxx xxx aw blades Per mandrini serie /100/200/250/300/400 TECHNICAL DETAIL: - replaceable td ER32 collets (from 3 to 20) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. new , , Per mandrini serie /211/221/310 TECHNICAL DETAIL: - replaceable td ER40 collets (from 4 to 25) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. new ,
11 aw blades Cap nuts for CNC machines Ø20x14 F.1 M30x1,5 38 spanner Ø20x14 F.1 M30x1,5 2 M33x3 Cap nuts for router machines x7gg IO30 retaining studs Internal thread For machines with M33x3 threaded spindle nose. Ø20x14Fx M30x1, Internal thread Cutter arbor with HK tapered shank For machines with 1-1/8 x7 threaded spindle nose. Ø20x14Fx M30x1, DECRIPTION D1 D2 Retaining stud for /201 Biesse chucks Retaining stud for /211 Biesse, Omlat, Bulleri, Busellato, CM and IMA chucks Retaining stud for /221 Alberti-Masterwood chucks 9 12, Retaining stud for /251 CM - Morbidelli chucks 6,5 8, Retaining stud for P and Leuco chucks M D HK-F63 Ø30x HK-F63 Ø35x HK-F63 Ø40x For Homag, Eima from 9/94, Dubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines. 100 tandard D Flange Optional Cutter arbor with IO30 tapered shank D For Biesse machines. pare parts for chucks DECRIPTION IO 30 Ø30x M6x25 TCEI screw teel flange for with Ø30 arbors - Male M teel flange for with Ø35 arbors - Male M teel flange for with Ø40 arbors - Male M DECRIPTION Optional teel flange for with Ø30 arbors - Female teel flange for with Ø35 arbors - Female teel flange for with Ø40 arbors - Female F F F 196
12 aw blade arbor with parallel shank 97, pare parts D Pin Hole L /M6/48 97, M6x10 TCEI screw allen key allen key aw blades Collet chucks clamp with MK2 tapered shank 123 MK2/Ø20x14Fx Collets for 123 chucks 31 3 Clamping nuts C-spanner M30x1,5 Ø , , DECRIPTION DECRIPTION Clamping nut Type Usag c-spanner ,
13 Tel (0) Terätoimitus Lehtinen Oy Tupalankatu LAHTI Finland
2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre Tools with ore Router its & ets Cutters & Chucks its for Hand aws Accessories Catalogue English edition 2016/2017 THE WIET TOOLING RANGE Overall Rating 10! Top Performing Router its 1994 Welcome to
More informationHSK-F63 Clamping nut without bearing ER HSK-F63 Clamping nut with bearing ER * To be used with collet
abre Tools with ore Router its & ets Kinetic ust Extractor KINETIC UT EXTRACTOR 992 Removes MF & Chipboard dust from the workpiece ECRIPTION Kinetic ust Extractor for chucks with IN6388/EOC25 collets 100
More informationCNC router cutters & chucks
CNC router cutters & chucks Products Page Universal assembly supports for chucks 176 CNC chucks 176~180 Precision collets 180-181 Cutter arbor 182-183 MK2 chucks 183 olid carbide spiral bits 184~190 CNC
More information2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre & ets Cutters & Chucks ndustrial owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing 1994 Welcome to the 2016/2017 catalogue ear Customer,
More informationCatalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s ndustrial pare parts isplay cabinets WOO CHOCE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B T Welcome to the 2014/2015 catalog ear customer,
More informationWelcome to the 2016/2017 catalogue
Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our catalogue and choose from a wider range of innovative and state-of-the-art woodworking
More informationTHE WIDEST TOOLING RANGE CATALOGUE ENGLISH EDITION 2018
THE WET TOONG RANGE CATAOGUE ENGH ETON 2018 aw Blades Jig aw Blades abre aw Blades Tools for Multi-Cutters Tools with Bore & Knives Router Bits & ets CNC Router Cutters & Chucks ndustrial owel rills Bits
More informationDowel Drills and Boring Bits
owel rills and Products Page XTreme owel rills 145 ~ 147 2 Flute owel rills 148 ~ 149 4 Flute owel rills 150 ~ 152 olid Carbide Twist rills and Adaptors 153 4 Flute owel rills for Through Holes 154 2 Flute
More information2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre Router its & ets Cutters & Chucks owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing Router its 1994 Welcome to the 2016/2017 catalogue
More informationClamping systems 9.2
9. Clamping systems Clamping systems Clamping system produced in the form of collet chucks, clamping arbors, hydro sleeves and special sleeves. Clamping elements are designed for precise locating of tools
More informationBits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
More informationDowel drills. Adaptors 250. Drill holders 251. X-Treme dowel drills 254. Solid carbide twist drills 259. Dowel drills 260
owel drills Adaptors 250 rill holders 251 X-Treme dowel drills 254 Solid carbide twist drills 259 owel drills 260 Countersinks for dowel drills 266 owel drills for through holes 269 Hinge boring bits 270
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8
ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationWelcome to the 2016/2017 catalogue
Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our new catalogue and choose from a wider range of innovative and state-of-the-art
More informationDisplay cabinets. Saw blades. & Knives. Tools with bore. Router Bits & Sets. CNC Router Cutter & Chucks. Industrial.
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationClamping Tools
Clamping Tools 800-544-8436 www.guho.com Universal CNC Boring Chuck 21030 - Series 80 AB* No. A D For Weeke, Maka, Reichenbacher, etc. SK 30 1 90 50 1-13 21030-0-13002-0 For Biesse up from 9/92, Masterwoo
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationPLANING, FINGER JOINTING
6 POWERLOCK, PLANING, FINGER JOINTING PowerLock 188 Planing cutterheads 199 Planing mill cutters 212 Finger jointing cutters 216 Hydro-programme 219 6 Tool system PowerLock for planing- and moulding machines
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationDESCRIPTION. Display cabinets with: 240 HW router bits (S=Ø8mm), 60 spare parts (saw blades at your choice)
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationCUTTER BLOCKS. Knives HSS & Carbide Tipped
C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationMachine Tool Accessories
Machine Tool Accessories 33-00 Fiber Adapter Bushing Used to downsize the bore for smaller shank diameters. Bushings are not recommended for production routing. They should be used only as a temporary
More informationFacing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More informationSlot Cutters. Slot Cutter Arbors. without arbor 822 CARBIDE TIPPED. the only ORANGE one. pag /1/99 1:22 PM Page 28
pag 28-47 4/1/99 1:22 PM Page 28 Slot Cutters without arbor 822 CARBE TPPE These three wing carbide tipped CMT Slot Cutters feature anti-kickback three wing blade design and CMT trademark orange Teflon
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationMachine Tools MILLING PROCESS. BY LAKSHMIPATHI YERRA Asst.professor Dept.of Mechanical Engg.
Machine Tools MILLING PROCESS BY LAKSHMIPATHI YERRA Asst.professor Dept.of Mechanical Engg. FIG. 1 Typical parts and shapes produced by various cutting processes Fig. 2 Schematic illustration of milling
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationorder online at
F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved
More informationSpindle Tooling. Wobble Saw. RT Adjustable Grooving Rabbeting Cutterhead. 150 Spindle Tooling WOBBLE SAW AG00701
Spindle Tooling Wobble Saw WOBBLE SAW RT Adjustable Grooving Rabbeting Cutterhead AG00701 Titman s Wobble Saw is the traditional answer to the problem of cutting various widths of grooves in timber, chipboard
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationHC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationThe Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology
The Leitz power package for window and door production on CNC controlled machines RipTec ripple technology HSC technology Combined window tool systems Light metal alloy tools, coated drills and router
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationHSK63F HSK63F FC1 COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT COLLET CHUCKS HSK63F WITHOUT BALL BEARING COLLET NUT
HSK63F COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT Collet chucks with hollow taper shank V DIN 69893-6 FORM F Suitable for spring collets manufactured to DIN 6388 or DIN 6499 Ball bearing collet
More informationBSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
More information.01 undercut. Ø.187 locating dowel hole (Ø.1875 x.50 pin included)
Mold Components 1 SPRUE BUSHINGS Made of AISI 6150 material; precision ground; polished I.D. Hardened to Rc 46-50 Dowel pin hole in head for locating (pin included) Radius under head with undercut to reduce
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationCHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationPrecision Retention Knobs and Setup Equipment
Precision Retention Knobs and Setup Equipment Retention Knobs All mating surfaces are precision ground Manufactured to the highest standards for maximum safety and long life ightening Fixtures Preset tools
More informationChapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
More informationCMT Molding system 8/ / I Router Bits & Sets. Saw blades. Tools with bore & Knives. CNC Router Cutter & Chucks
CMT Molding system aw blades 8/956.852 f the standard selection of molding and mill work you find in today's lumber shops isn't satisfactory to your woodworking tastes, then look to CMT's molding system
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More informationTOOLS FOR PROCESSING SOLID CORE- AND SOLID SURFACE MATERIALS
TOOLS FOR PROCESSING SOLID CORE- AND SOLID SURFACE MATERIALS Cutters, drill bits and circular saw blades for CNC-machines Whether it s acrylic resin panels, compact coatings, mineral materials or epoxy
More informationWorkshop Practice (ME192)
Workshop Practice (ME192) Credits: 3 Contacts: Mail: poddar05@gmail.com Web: http://www.ajourneywithtime.weebly.com Exp 03: To make a pin as given profile from a φ20 mm mild steel rod in a lathe. Material
More informationClamping tools with flange module
Clamping tools with flange module MAPAL clamping tools with flange module are recommended for machining conditions in which radial run-out and angular error on the machine spindle must be compensated.
More informationWORKHOLDING TECHNOLOGIES
ITC WORKHOLDING TECHNOLOGIES Expanding Mandrels and Collet Chucks INDUSTRIAL TOOLS CORPORATION n 54/14, D-II, M.I.D.C., Chinchwad, Pune - 411 019. Tel.: 020-7474394, 7470844 n 302, Vicky Apartment, P.
More informationCAT40 Toolholders ER11
CAT40 ER11 CAT40 & Straight Shank ER11 Collet Chucks (Balanced to G2.5@18,000 RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationK E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More informationTrade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
More informationShaft coupling: compensation of mismatching shaft ends (see page B 117) Flange bearing: linear drive bearing (see page B 96)
Overview Linear Drives At the employment of linear drives, the directly or via a toothed belt driven spindle is the most frequently applied variant. Motor flange bearing End flange bearing (two angular
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationStile & panel router bits 8/970
tile & panel router bits 8/970 These bits can be used for decorative work on solid wood panels and MF materials. Use them in one pass or in combination with CMT s MF panel bits for complex and intricate
More informationEdge Treatment & Grooving Bits
Multi-Profile Bits Thick carbide tips and a sturdy 1 2 shank allow you to produce countless moulding profiles. Produce an endless number of profile designs by varying the height and fence settings and
More informationSAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationOptimus. The New Generation of Saw Blades. 4X Cutting Power Catalog US
Optimus The New Generation of 4X Cutting Power Catalog US OUR COMPANY ISHAD manufactures high quality saw blades for exportation world-wide. Each product complies with the strictest quality control standards
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationHYDRAULIC ZERO-REACH ARBORS. Zero-reach arbors with hydraulic chuck and matching POKOLM accessories
HYDRAULIC ZERO-REACH ARBORS Zero-reach arbors with hydraulic chuck and matching POKOLM accessories HYDRAULIC ZERO-REACH ARBORS ARBOR AND ADAPTER SYSTEMS HYDRAULIC ARBORS AND ADAPTERS: OUTSTANDING TOOL
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationROUTER BITS. Rabbeting Bits. Rabbeting Bits with Bearing Set Comes with interchangeable bearings to cut rabbets of different depths.
32-098 ROUTER BITS 42 32-504 Rabbeting Bits Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards and for letting in back panels. Steel pilots can be removed from bits
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationPIONEER TOOL HOLDING SOLUTIONS
PIONEER N.A., INC. PIONEER TOO HODING SOUTIONS 2018 CATAOG www.pioneerna.com PIONEER DUA CONTACT What is Dual Contact Dual Contact spindle gageline is ground to a controlled dimension to the taper of the
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationThe Durham Woodworking Club. January 31, 2016
The Durham Woodworking Club January 31, 2016 A router is a tool used to rout out (hollow out) an area in the face of a relatively hard workpiece, typically of wood or plastic. The main application of routers
More informationATLANTIC JIG BORER MODEL 4000
ATLANTIC JIG BORER MODEL 4000 THE MACHINE BUILT TO DO TOMORROW'S WORK TODAY! ATLANTIC JIG BORER MODEL 4000 No single feature makes one jig-borer better than another... it takes the proper balance of engineering,
More information