Sliding Door System Terra ST.1060.TE

Size: px

Start display at page:

Download "Sliding Door System Terra ST.1060.TE"

Cynthia Hill
5 years ago
Views:

1 Sliding Door System Terra ST.1060.TE

2 BASIC SYSTEMS SLIDING SCHIEBETÜRSYSTEM DOOR SYSTEM PROTEC TERRA Sliding Door System TERRA ST.1060.TE 2 3

BASIC SYSTEMS SLIDING DOOR SYSTEM TERRA Sliding Door System TERRA ST.1060.

Thereby static load on other components is significantly reduced.

A floor recessed rail is available optionally. Door weight max.

Partly polished, completely polished or PVD coated finishing (copper, gold or black) is available on

3 BASIC SYSTEMS SLIDING DOOR SYSTEM TERRA Sliding Door System TERRA ST.1060.TE The visible wheels of the Terra system stand on the floor rail and bear the entire weight of the door. Thereby static load on other components is significantly reduced. The floor rail can either be screwed or glued to the floor. A floor recessed rail is available optionally. Door weight max. 135 kg Standard finish is decorative satin stainless steel. Partly polished, completely polished or PVD coated finishing (copper, gold or black) is available on request. Feel free to contact us, if you want to learn more about the Terra system. Ceiling Floor rail measurements: Optional: recessed floor rail Floor rail: Fixed with screws or glue Floor For Terra systems with the rails flush-mounted to the 4 floor, the floor rollers are supplied suitably tailored! 5

4 BASIC SYSTEMS SLIDING SCHIEBETÜRSYSTEM DOOR SYSTEM PROTEC TERRA Sliding Door System TERRA ST.1060.TE 6 7

5 BASIC SYSTEMS SLIDING DOOR SYSTEM TERRA Sliding Door System TERRA ST.1060.TE 8 9

Fastening with angle (in the scope of supply): no visible screws from the front! ST.4040.

3060.TE Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available.

6 R8 GUIDE PROFILE FOR TERRA SYSTEMS, ONE-PART ONE-PART GUIDE PROFILE INSTALLATION OPTIONS Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends can be closed with a welded lid of stainless steel, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) If installation is onto a wall or glass, the holes on the guide profile are covered with clip lids. Fastening with angle (in the scope of supply): no visible screws from the front! ST.4040.TE Wall / ceiling guide profile, one-part The guide profile is divided from a length of 3 metres! One-part guide profile One-part guide profile Wall fastener for one-part guide profile Glass fastener for one-part guide profile Stopper for one-part guide profile Variant 3: ST.2100.TE wall fastener Variant 4: ST.2176.TE.S glass fastener Delivery includes clip lid ST.2100.TE Incl. distance spacer sleeve, wall distance in accordance with customer information ST.2176.TE.S ST.3060.TE Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Wall angle for one-part guide profile Lid for one-part guide profile Mirror-finished surfaces ST.2100.TE wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! For a closed front side (welded) Mirror finished as part of manufacture ST.2100.TE.W ST.4060.TE Price: 45 % surcharge per component / system One-part guide profile One-part guide profile 10 11

(e.g. niche area) Mirror-finished surfaces ST.2100.TE.S wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available.

7 TWO-PARTS GUIDE PROFILE FOR TERRA SYSTEMS WITH MWE SOFT STOP TECHNOLOGY GUIDE PROFILE INSTALLATION OPTIONS, TWO-PARTS WITH MWE SOFT STOP TECHNOLOGY Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends are closed with a welded lid as standard, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) Advantage of a two-piece guide profile: no visible screws from the front! Advantage of a two-piece guide profile: no visible screws from the front! ST.4053 Wall / ceiling guide profile, two-parts, for MWE soft stop technology R8 Door Türblattbreite leaf width // The guide profile is divided from a length of 3 metres! Two-parts guide profile Two-parts guide profile MWE soft stop technology for Terra systems Variant 3: ST.2100.TE.S wall fastener Variant 4: ST.2176.TE.S glass fastener MWE standard: The delivery of the two-part guide profiles takes place with the lids welded for closed front sides. Caution: Max. door leaf weight 75 kg ST.3660 Incl. fasteners, dampers, catches and grid plates Glass fastener for two-parts guide profile Wall fastener for two-parts guide profile Caution: Please indicate if closed front sides are not necessary (e.g. niche area) Mirror-finished surfaces ST.2100.TE.S wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! If the wall distance cannot be compensated for, it can be installed onto glass without a distance spacer. Advantage: small gap dimensions! Incl. distance spacer sleeve, glass distance in accordance with customer information Inc. rosette, spacer sleeve, screw and wall plug, wall distance in accordance with customer information Mirror finished as part of manufacture ST.2176.TE.S ST.2100.TE.S Price: 45 % surcharge per component / system Two-parts guide profile Two-parts guide profile 12 13

8 MANUFACTORY MWE stands for high quality and great attention to detail. Our philosophy and mission is to provide products that keep up with the spirit of the time. We keep meeting the highest requirements in terms of design, quality and functionality. Top MWE technology combined with excellent customer relationship management results in Quality built on passion! Click here to browse through our catalogues and magazines: Doors Ladders Showers Door pulls 14 15

Sliding Door System Terra Akzent ST.1064.TA. Premium Edition

Sliding Door System Terra Akzent ST.1064.TA PREMIUM SYSTEMS SLIDING DOOR SYSTEM TERRA AKZENT Sliding Door System TERRA AKZENT ST.1064.TA 2 3 PREMIUM SYSTEMS SLIDING DOOR SYSTEM TERRA AKZENT Sliding Door