08_Cutters_en_0313_08_Cutters_en_ :54 Seite 137 Trimmers
|
|
- Vivien Moody
- 5 years ago
- Views:
Transcription
1 Trimmers
2 Cutting Edge According to the dictionary cutting edge means the edge of a cutting tool in contact with the work during a machining operation. And thatʼs the definition we will use. But for cutting edge you might also find explanations like up-to-date or state-of-the-art or leading position, and here we are right again. Those who do pictures themselves, either in a photo lab or with an ink jet printer, need a trimmer.when you consider, what can be produced with your computer using up-to-date printing software business cards, greeting cards, CD inlays and much more a clean and precise cut is the minimum you should grant to your own printout. Trimmers using a rotary blade offer a lot of advantages and are especially safe. Cutting quality is definitely the most important issue, this means a clean and accurate cutting edge. Blade, counter-blade and the guiding of the cutting head are the crucial factors. Additional features like format markings, scales, grid patterns and guide rails make positioning and aligning easy. Cutting length, cutting capacity and table size are the determining factors in choosing the best trimmer. Whether you use the trimmer as a professional tool or just with your hobby: in any case you can find a suitable trimmer on the following pages so trim up your prints. 138
3 hobby cut Safety Trimmer With self-sharpening circular blade in closed plastic housing. Automatic paper clamping at cutting position. Transparent paper-holding strip. Two angle stops with cm and inch scales. Sturdy metal base board with printed fine grid, scales, format and angle markings. 4313: hobby cut 3 Cutting length: approx. 330 mm (13 in.) Cutting thickness: max. 1 mm (0.04 in.) Dimensions (WxHxD): approx. 450 x 85 x 210 mm (17.7 x 3.3 x 8.3 in.) 4314: hobby cut 4 Cutting length: approx. 460 mm (18.1 in.) Cutting thickness: max. 1 mm (0.04 in.) Dimensions (WxHxD): approx. 580 x 85 x 210 mm (22.8 x 3.3 x 8.3 in.) Trimmers 139
4 easy cut Safety Trimmer With ground circular blade placed in a closed plastic housing. Transparent pressure rail for automatic paper clamping at cutting position. Sturdy metal base board with scales, format and angle markings. 4306: easy cut 1 Cutting length: approx. 320 mm (12.6 in.) Max. cutting thickness: 1.0 mm (0.04 in.) Dimensions: approx. 44 x 7 x 19 cm (17.3 x 2.8 x 7.5 in.) 4307: easy cut 2 Cutting length: approx. 450 mm (17.7 in.) Max. cutting thickness: 0.8 mm (0.03 in.) Dimensions: approx. 57 x 7 x 19 cm (22.4 x 2.8 x 7.5 in.) 4303/4103 multi cut Guillotine Cutter Safety trimmer with honed top and bottom blades. Hand pressing rail. Angle guide with cm/inch scale and detachable magnetic back stop. Sturdy base board with cm/inch scale and format markings. 4303: multi cut 3 Cutting length: 340 mm (13.4 in.) Cutting thickness: 1.5 mm (0.06 in.) Table size exterior dimensions: 45 x 28.5 cm (17.7 x 11.2 in.) 4103: multi cut 2 Cutting length: 460 mm (18.1 in.) Cutting thickness: 1.5 mm (0.06 in.) Table size exterior dimensions: 55 x 28 cm (21.7 x 11 in.) 140
5 profi cut Safety Trimmer Self-sharpening circular blade in closed plastic housing. Grinded counter-blade. Automatic paper clamping at cutting position. Transparent paper-holding strip. Angle stop with cm and inch scales and detachable magnetic back stop. Base plate with cm and inch scales and format markings. Provisions for wall mounting. 4317: profi cut 1 Cutting length: 360 mm (14.2 in.) Cutting thickness: 2 mm (.08 in.) Dimensions 555 x 92 x 367 mm (WxHxD): (21.8 x 3.6 x 14.4 in.) 4318: profi cut 2 Cutting length: 510 mm (20.1 in) Cutting thickness: 2 mm (.08 in.) Dimensions 705 x 92 x 367 mm (WxHxD): (27.8 x 3.6 x 14.4 in.) 4319: profi cut 3 Cutting length: 720 mm (28.3 in.) Cutting thickness: 2 mm (.08 in.) Dimensions 915 x 92 x 367 mm (WxHxD): (36 x 3.6 x 14.4 in.) Trimmers 141
6 XL Cut Safety Trimmer Cutter for large-format prints, posters and other large-sized papers. Ground circular blade placed in a closed plastic housing. Ground counter-blade. Automatic paper clamping at cutting position with transparent paper-holding strip. Angle guides on both sides, adjustable back-stop. Metal cutting table with various guides. Provisions for wall mounting. 4323: Cutting length: 92 cm (36.2 in.) Max. cutting thickness: 2.5 mm (0.1 in.) Dimensions: 112 x 38.4 cm (44.1 x 15.1 in.) Weight: 7.2 kg (15.9 lbs.) 4324: Cutting length: 130 cm (51.2 in.) Max. cutting thickness: 2.0 mm (0.08 in.) Dimensions: 150 x 38.4 cm (59.1 x 15.1 in.) Weight: 9.4 kg (20.7 lbs.) 4301 Guillotine Cutter For application photos and passport photos. Incl. extension board with slidable gauge. Cutting length: approx. 15 cm (6 in.) Cutting height: max. 0.3 mm Dimensions (WxHxD): approx x 3.2 x 12.5 cm (8.9 x 1.3 x 4.9 in.) (without gauge) 142
PROFESSIONAL CUTTING MACHINES
PROFESSIONAL CUTTING MACHINES EN CREATE A LASTING IMPRESSION FIRST IMPRESSIONS TO CUT THROUGH THE CLUTTER In a world overflowing with information, it is more important than ever to create a lasting positive
More informationImage + Archiving 129
After Treatment After processing your films, burning image files to a CD, enlarging or printing pictures, there is still something to do. For example, pictures and prints have to be trimmed. Trimmers like
More informationPlaner Blade Attachment SVH-320
Planer Blade Attachment SVH-320 (60517) HSS PLANER BLADES Copes with any length. Min width (a) 13 mm (½"). Tungsten carbide blades cannot be ground. MITRE GUILLOTINE BLADES Positioning of Machine Grinding
More informationCOIL PROCESSING & SHEARING SYSTEMS
COIL PROCESSING & SHEARING SYSTEMS GREEN SOLUTIONS REDUCTION OF RAW MATERIAL COST Cost of material in coil is 15 20 % less than cost of material in blanks REDUCTION OF SCRAP MATERIAL Instead of fixed sized
More informationReg: 2003/026983/07 Vat: BUSINESS MACHINES PRODUCT CATALOGUE.
Reg: 2003/026983/07 Vat: 4340210410 BUSINESS MACHINES PRODUCT CATALOGUE 2013 www.dosptyltd.com Tel: (011) 792 3857 Fax: (011) 792 9732 PO. Box 2411, Cresta, 2118 Email: tanya@dosptyltd.com Protect confidential
More informationQuilt Along Mug Block
Quilt Along Mug Block Rotary Cut, Pieced Block Finished size 12 square, Unfinished size 12 ½ square Overview This block features rotary cut pieces and stitch and flip corners. The text can be computer
More informationHow to make a numeral roll
How to make a numeral roll A numeral roll shows the numerals in order with each numeral in a box. The numeral roll shown here uses color coding to emphasize the family decade. Specifically, the numerals
More informationEPSON Stylus Color 880/880i. Accessories. Printer Specifications. Ink Cartridges. Media. Printing
edge guides output tray extension paper support printer cover ink cartridge clamp thickness lever control panel output tray Media name Size Part number EPSON Photo 4 6 inches Panoramic (8.3 23.4 inches)
More information20 % OFF 30 % OFF NEW. Edition - While Stocks Last. 5025e Electric Stapler. VS15 Electric Paper Drill. CB180 & CB200e Comb Binders.
CELEBRATE 2360-60 Anniversary Shredder Limited Edition desk-side shredder in silver. Photo-cell controlled automatic start and stop. High quality cutting shafts made special hardened steel. Includes permanent
More informationCut-True 16M Manual Paper Cutter
Cut-True 16M Manual Paper Cutter 2/2013 OPERATOR MANUAL FIRST EDITION TABLE OF CONTENTS TOPIC PAGE Specifications 1 Safety Guidelines 1 Assembly 2 Overview 3 Description of Equipment Parts 3-4 Operation
More information05_Leuchtplatten_en_0313_05_Leuchtplatten_en_ :36 Seite 115 Light Boxes
Light Boxes Luminous Surfaces Light is the elixir of life in photography. This not only applies to the light you need when shooting a picture, but in addition to the lighting conditions when viewing the
More informationIW SERIES IRONWORKERS DURMA
IW SERIES IRONWORKERS BETTER PARTS BETTER PROFITS IW SERIES IRONWORKERS STANDARD EQUIPMENT Swing Away Stripper Punching Station Section Cutting Angle Cutting Flat Bar Shearing Notching Twist and Drop Punch
More informationHydraulic Swing Beam Shear POWERcut
RAS Reinhardt Maschinenbau GmbH RAS : Much more than just power! A concept for all requirements Do you often find burrs on the cut pieces, because you forgot to adjust the blade clearance properly? Are
More informationEPSON Stylus COLOR 760. Printer Specifications. Accessories. Printing. Ink Cartridges. Media
edge guides output tray extensions paper support ink cartridge clamp printer cover thickness lever control panel output tray Media name Size Part number EPSON Photo Paper Printer Specifications Letter
More informationSabre Series 2 Inspired Design Precision Engineering
Sabre Series 2 Inspired Design Precision Engineering USER INSTRUCTIONS Thank you for choosing the Keencut Sabre Series 2. Every effort has been made to bring you a precision engineered product with the
More informationEPSON Stylus Photo 780. Accessories. Ink Cartridges. Media. User Replaceable Parts
sheet feeder left edge guide Accessories Ink Cartridges Cartridge Black Color Media Part number T007201 (U.S.) T007311 (Canada) T008201 (U.S.) T008311 (Canada) name Size Part number EPSON 360 dpi Ink Jet
More informationHalf-Cut or Through Cut Always on the Cutting Edge
Half-Cut or Through Cut Always on the Cutting Edge Mimaki s precise and reliable roll cutting plotters (Max. width 76 cm) (Max. width 130 cm) (Max. width 160 cm) PRODUCT GUIDE Terms of use The contents
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationUSER MANUAL. No heat. No electricity. No batteries. Laminator Label Maker Magnet Maker. Sticker Maker. Makes items up to 9 wide. * Use it. anywhere!
MODEL 900 3 1 Use it anywhere! No heat. No electricity. No batteries. Makes items up to 9 wide. * Sticker Maker Laminator Label Maker Magnet Maker 2 * Adhesive cartridge 9 wide, all others 8.5 wide. USER
More informationCustom Stripmaster & Custom Stripmaster Lite Wire Strippers
Custom Stripmaster & Custom Stripmaster Lite Wire Strippers Unique blade design covers a wide range of precision commercial and military stripping applications One-step spring action wire stripping increases
More informationStripmaster Wire Strippers
D Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide
More informationTimber construction. Overview of products and applications. Carpentry portable circular saw HK 132
332 Overview of products and applications 334 Sword saws SSU 200, IS 330 Carpentry portable circular saw HK 132 Hand-held planer PL 205, PL 245 Chain mortiser CM 150 335 337 338 339 Accessories and consumable
More informationCutting guide. No matter what comes under the blade, you always cut a fine figure with Dahle cutting machines.
Cutting guide No matter what comes under the blade, you always cut a fine figure with Dahle cutting machines. My expectation: A precision cut. Through any material. My Dahle. When it comes to cutting,
More informationKnife Jig SVM-45 (60533)
Knife Jig SVM-45 (60533) KNIVES Min length of blade 60 mm (2 "). CARVERS DRAW KNIVES Positioning of Machine Note The height of the bench must not be too high when grinding knives. 550 650 mm (22 26") is
More informationYes No. Item Number. Specifications Required*
LOT 2: Stationery Items Vendors are to tick column 'yes' or 'no' in the below table on ability to supply the required stationery and email this document with the expression of interest to email address:
More informationSCREEN MAKING PROCESS
Silkscreening is highly suitable for home printing, whether it is a series on paper, a set of T-shirts, team jackets or vinyl printing on plastic. It is possible to temporarily create a home print shop
More information6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL
4511 WAYNE AVENUE PHILADELPHIA PA 19144 TEL: 888-800-2663 FAX: 800-582-9643 6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL CONTENTS I. INTRODUCTION TO BOND PCC-6 / MACHINE SPECIFICATIONS II. SAFETY PRECAUTIONS
More informationEPSON Stylus C82. Ink Cartridges. User Replaceable Part. Media. 10/02 EPSON Stylus C82-1. Left edge guide. Right edge guide.
Printer Parts Accessories Left edge guide Paper support Right edge guide Printer cover Output tray Ink Cartridges Cartridge Part number Black T032120 Cyan T042220 Magenta T042320 Yellow T042420 User Replaceable
More informationREAL PAD PRINTERS. Regd. Office: Plot No 86, New Ahirwara, Old Faridabad. (Haryana) Website - https://www.realpadprinters.com, Mob:
Manual Pad Printing Machine RP-1210 M Closed Cup Pad Printing Machine RP-1210 M is a Closed cup system. This essentially means that the ink is stored inside an inverted Cup. The cup is then held to the
More informationSECTOR Series. Maximum Cutting Precision in Minimum Space PRODUCTIVITY AND PRECISION
Edgebanders CNC Machining Centers Vertical Panel Saws Beam Saws Panel Handling Maximum Cutting Precision in Minimum Space SECTOR Series PRODUCTIVITY AND PRECISION The SECTOR Series always ensures clean
More informationOPERATING INSTRUCTIONS FOR MODEL SPR-25 Manual Stencil Printer
OPERATING INSTRUCTIONS FOR MODEL SPR-25 Manual Stencil Printer TABLE OF CONTENTS I. INSTALLATION...3 II. SET-UP...4 III. Z AXIS ADJUSTMENT (Screen Height)...6 IV. X, Y AND Ø ADJUSTMENTS...6 V. SQUEEGEE
More informationPhysical laboratory testing equipment
Zehntner GmbH Testing Instruments Baerenmattenstrasse 3 CH-4434 Hoelstein Switzerland Tel +41 61 953 05 50 Fax +41 61 953 05 51 zehntner@zehntner.com www.zehntner.com Physical laboratory testing equipment
More informationOPERATING INSTRUCTIONS for. Gold-Print TM. Model SPR-10 Screen and Stencil Printer
OPERATING INSTRUCTIONS for Gold-Print TM Model SPR-10 Screen and Stencil Printer TABLE OF CONTENTS INSTALLATION...3 Z ADJUSTMENTS...3 X, Y & Ø ADJUSTMENTS...4 CIRCUIT BOARD POSITIONING...5 ILLUSTRATIONS...6
More informationOPERATING INSTRUCTIONS
ROTTERMANN AG CH-8832 Wollerau Tel. +41/44-687'10'01 Fax +41/44-687'10'11 info@rottermann.com Bevel trimmer ROGAtrim KS4-3p OPERATING INSTRUCTIONS I:\DATEN\TEXTE\7000\GEB_ANL\KS_TSGEB\GB_MAN\EKS4_3P.WPD
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationMartin Yale 7000E Guillotine Cutter
Martin Yale 7000E Guillotine Cutter Blade Leveling Guide Provided By http://www.mybinding.com http://www.mybindingblog.com Blade Removal, Installation and Leveling for the 7000E Disclaimer The following
More informationEBA 430 E EBA 430 EP. Operating Instructions
EBA 430 E EBA 430 EP Operating Instructions EBA 430 E EBA 430 EP Dear customer, Thank you for choosing a paper cutting machine from EBA. With the purchase of this quality product you can be sure you have
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationTrimmers CUT OUT for the way you work
Trimmers CUT OUT for the way you work Portable Lightweight and easy to transport or the business professional who needs a trimmer that is easy to use and lightweight to carry, Swingline s portable trimmers
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationProfessional welding tables
Professional welding tables WELDING TABLES ACCESSORIES STOPS PRESSURERS/CLAMPS/GRIPS BOLTS weldingmaster We are the manufacturers of modular welding tables. Weldingmaster tables are highly innovative products,
More informationJavelin Integra Inspired Design Precision Engineering
Javelin Integra Inspired Design Precision Engineering USER INSTRUCTIONS Thank you for choosing the Keencut Javelin Integra. Every effort has been made to bring you a precision engineered product with the
More informationEPSON Stylus COLOR 300. Accessories. Printer Specifications. User Replaceable Parts. Cartridge. Media. Printing
paper support Accessories edge guides left edge guide lock lever paper thickness lever power switch Ink Cartridge Use only the ink cartridge specified in the table below with the EPSON Stylus COLOR 300.
More informationADVANCED ROTARY CUTTER & TABLE EDGE ADVANCED ROTARY CUTTER
1 ADVANCED ROTARY CUTTER & TABLE EDGE ADVANCED ROTARY CUTTER F D E I INSTRUCTION MANUAL MANUEL D INSTRUCTIONS GEBRAUCHSLANLEITUNG MANUAL DE INSTRUCCION MANUALE DI ISTRUZIONI 2 6 10 14 18 THE WORLD S FINEST
More informationStripmaster Wire Stripper. Specifications Stripping Hole Diameter in Inches (mm) Wire Size AWG
Stripmaster and Stripmaster Lite Wire Strippers One-step stripping enhances productivity Spring-action motion increases leverage and reduces operator fatigue Precision-ground, knife-type blades provide
More informationWALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
More informationAluminium extruded side rails perfectly align with the saw blade.
Triton TWX7 Workcentre A versatile woodworking station that can be fitted with both a router module and a saw table module without additional adjustments TWX7 Workcentre Triton is a brand that is well-known
More informationSpecial Offers. December New! Sharpening machine for domestic knives and scissors.
December 2011 Special Offers! Sharpening machine for domestic knives and scissors. MVM Srl 42015 Correggio (RE) ITALY- Via del Progresso, 14 Tel. (+ 39) 0522 632266 - Fax (+ 39) 0522 642011 Email: mvmsrl@mvmsrl.it
More informationModel SKU # Cut Length Dimensions Price
712 TRIMMERS DAHLE ROLLING TRIMMERS Personal Series The lightweight and portable design of Dahle s Personal Trimmers offers take anywhere convenience. Equipped with a ground self-sharpening blade that
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationINDEX. Effective Dec 01, SC
INDEX BINDERY PAGE BINDING EQUIPMENT AND SUPPLIES... 1-2 BINDERY COVERS...3 LAMINATING EQUIPMENT...4 PAPER TRIMMERS / FOLDERS...4 BINDERY SUPPLIES... 5-6 BINDERY 13 Orders of less than 100 sheets of the
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationW+D 320 FLEXIBLE, SHORT-RUN ENVELOPE PRODUCTION SYSTEM. Vf+C
W+D 320 FLEXIBLE, SHORT-RUN ENVELOPE PRODUCTION SYSTEM Vf+C W+d 320 / Flexible envelope machine the ideal investment For Short-run and in-house envelope production The W+D 320 envelope production system
More informationInstallation Instructions. P/N Edition 1 January EasyCoder E4 Paper Cutter Kit
Installation Instructions P/N 1-960457-01 Edition 1 January 2000 EasyCoder E4 Paper Cutter Kit Feed Power Paper Cutter Description The EasyCoder E4 can easily be fitted with an optional Paper Cutter. The
More informationIMPRESS YOUR CUSTOMERS! With PhotoPrintMe, offer a new photography business in your store.
IMPRESS YOUR CUSTOMERS! With PhotoPrintMe, offer a new photography business in your store. PHOTOPRINTME BRINGS YOU A WORLD OF POSSIBILITIES Did you know that 1.7 trillion photographs were taken in 2017?
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationPRECISION KNIFE SHARPENING SYSTEM USER MANUAL
PRECISION KNIFE SHARPENING SYSTEM USER MANUAL * Knife not included Thank you for purchasing FINO EDGE Precision Knife Sharpening System! A C F J I E B D G H մbox Contents A Heavy-Duty Base Plate with 3
More informationEquipments for drawing and architecture
Equipments for drawing and architecture Square 60 degree Beveled edge, ink-edge and finger lift Length 12 cm 140-01-01 15 cm 140-01-02 20 cm 140-01-03 25 cm 140-01-04 30 cm 140-01-05 35 cm 140-01-06 Square
More informationME 25 ENGLAND. Tel +44 (0) Web 1 Blatchford Road, Horsham, West Sussex RH13 5QR
ENG ME 25 Automatic edge bander me 25 THE INNOVATIVE AUTOMATIC EDGE BANDING MACHINE FOR CRAFT JOINER S SHOPS Stable, steady, with constantly maintained adjustments, thanks to the stainless steel single-block
More informationTechnical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
More informationSaw, Files, Grinders and Brushes
ß 7005-7008 0 Overall length approx. 295, working length approx. 15, trim height approx. 25. 7005 Smooth, hardened cast steel wire, 0,35 Ø. Wire scratch brushes 7007 Brass wire, fine, 0,15 Ø, crimped.
More informationInstruction Manual X97
Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationEPSON Stylus C80. Ink Cartridges. User Replaceable Parts. Media. 1/02 EPSON Stylus C80-1. Paper support. Left edge guide
Printer Parts Accessories Left edge guide Paper support Ink Cartridges Cartridge Part number Printer cover Right edge guide Black Cyan Magenta Yellow T032120 T032220 T032320 T032420 User Replaceable Parts
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationEPSON Stylus Color 480SXU
sheet feeder left edge guide Accessories Ink Cartridges paper support printer cover ink cartridge clamps output tray ink cartridge holders (do not remove) Media Media name Size Part number EPSON 360 dpi
More informationTree protection systems 2.0
r e z t ü h c s m u Die Ba Tree protection systems 2.0 Installation and assembly instructions 2 General information The installation instructions below are merely a recommendation for how to install the
More informationMachines that Mean Business
Machines that Mean Business Everything you need to get the job done Ideal 4300 Manual Guillotine Stand valued at over $300 Until stocks last Attractively priced heavy duty guillotine with numerous safety
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationPole Conversion System For safe and efficient conversion of non-lowering light poles.
Conversion System USER GUIDE: OVERVIEW The Swivelpole Conversion Tool clamps onto the existing non-lowering pole and safely supports the pole during a cold cut with the Ratchet Pipe Cutter, eliminating
More informationCeiling Tile Installations Part 1. Sheetrock Installations Part 2. WolfVision Support 2055 Sugarloaf Circle, Suite 125 Duluth, GA 30097
Ceiling Tile Installations Part 1 Sheetrock Installations Part 2 WolfVision Support 2055 Sugarloaf Circle, Suite 125 Duluth, GA 30097 (877) 873-WOLF support@wolfvision.us 0 EYE Series Mounting Kit Part
More informationQuick Start Guide. Use the [ ] [ ] key to select the installed ink type and press the [ENTER] key. PIG. CMYKLcLm/PIG. CMYKOrGr/DYE CMYKLcLm
Quick Start Guide Unpacking Begin by unpacking the stand. Instructions are included in the box. Then prepare the main unit and install on stand. Make sure that the unit is firmly attached to the stand
More informationBasic steps to time the Gammill quilting machine s rotary sewing hook
Basic steps to time the Gammill quilting machine s rotary sewing hook 1.) Turn the machine off and unplug it. 2.) With the needle bar in the raised position, remove the bobbin and bobbin case. 3.) Remove
More informationCUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS
CUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS UNIQUE BLADE DESIGN ONE-STEP SPRING ACTION STURDY METAL FRAME IDEALIND.COM CUSTOM STRIPMASTER WIRE STRIPPERS The Custom Stripmaster Wire Stripper
More informationSpecifications. Piezoelectric inkjet / Grit roller feed
Roland LEC-300 Printing method / Cutting method Acceptable media Printing/cutting width Ink cartridges Ink curing unit Printing resolutions Acceptable blade tool Cutting speed Blade force Blade offset
More informationSTANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD COMPACT VERSATILE PRECISE SOLID Universal vertical sawing technology UNIVERSAL VERTICAL SAWING TECHNOLOGY The Swiss label symbolises quality, safety,
More informationWritten by Frank Garcia Ver. 2
Written by Frank Garcia frankg670@gmail.com 3-18-2017 Ver. 2 Preparing Copper Or Brass inlay wire. The Copper or Brass wire which is used with this inlay technique is flat. The wire can be purchased from
More informationMACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationDRILL GRINDING ATTACHMENT
DRILL GRINDING ATTACHMENT To suit TM6025Q TOOL AND CUTTER GRINDER OPERATION S MANUAL 1 0º 270º 90º 180º INTRODUCTION Before grinding any cutters, you must set up the attachment to suit the type of cutter
More informationPipe Diameter Part Number Rotary Cutter 6-63mm Rotary Cutter 10-90mm Rotary Cutter mm ips
Installers and installation equipment Installation personnel should be trained and technically competent for this jointing method. Training for installers is available free of charge on request from our
More informationPad printing accessories. Accessories for inks & ink cups. Screened films & plastic plate manufacturing Cleaning Miscellaneous
Pad printing accessories Accessories for inks & ink cups Screened films & plastic plate manufacturing Cleaning Miscellaneous Inhalt Summary Page Adhesive spray KIWO FIX 12 All-purpose gloves 9 All-purpose
More informationfastbook Professional
JUST BEAUTIFUL DESIGN PRODUCTS Book Block System for the Professional Market new up to 18 x 18 Your innovative premium XXL Format Production canvas production Expand your radius in beautiful designed photo
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More information7 NEW PRODUCTS FOR 2017!
NO PRICE INCREASES FOR LoganGraphic.com 7 NEW PRODUCTS FOR! T100 CRAFT MATERIALS CUTTER -PG 5 T50 ROTARY CUTTER -PG 5 W3002 FOAMWERKS CUTTING BOARD PG- 9 table of contents Mat Cutters 2 Specialty Cutting
More informationU Range. Models U 150, U 500, U 1000 PIPE ROTATORS WITH CLAMPING ROLLER SYSTEM (patented) The welding device especially designed for pipe welding
U Range Models U 150, U 500, U 1000 PIPE ROTATORS WITH CLAMPING ROLLER SYSTEM (patented) The welding device especially designed for pipe welding Applications: For clamping, rotation and tilting of pipes
More informationW 40. Automatic Surface Grinding Machine
W 40 Automatic Surface Grinding Machine W 40 Automatic Surface Grinding Machine Sharpness and surface flatness of mincer and emulsifier cutting tools have a great impact on the quality of sausage products.
More informationInstallation Instructions. Materials Needed. Parts Included. Tools You Will Need
Installation Instructions 27 Built In Wall Oven JKP15, JKP18, JKP27, JKP45, JKP56 JKS05, ZEK937, ZEK957 If you have questions, call 800-GE-CARES or visit our website at: www.geappliances.com Before you
More informationELC-2-20R. Electronics. Wire Cutting Lead Forming Wire Bending. view:
ELC-2-20R Electronics Wire Cutting Lead Forming Wire Bending www.simonds-inc.com view: www.youtube.com/simondsinc 9/27/2016 1 For over thirty years Simonds Inc. has been the acknowledged leader in ergonomic
More informationPlexidor Glass Conversion Pet Door Consumer Instructions
Plexidor Glass Conversion Pet Door Consumer Instructions (Rev 1 2012) Instructions for Installing a Plexidor Pet Door into Glass Sliding Glass Patio Doors French Doors Stationary Windows Other Household
More informationXI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
More informationfor all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd
Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More
More informationDevelopment of Turn-milling in Conventional Lathe Machine
Development of Turn-milling in Conventional Lathe Machine Yohanes a,*, Roki Handika b,*, Gusmardani Jefryanto b and Evon Yulianto b a) Laboratory of Technology Production, Department of Mechanical Engineering,
More informationTHE FULL LINE METAL SPECIALISTS
PRECISION METALS THE FULL LINE METAL SPECIALISTS 6917 West 59th Street Chicago, Illinois 60638 Phone 773/586-8503 Fax 773/586-8556 www.ksmetals.com THE USES ARE ENDLESS!!! Hobby, Craft, DIY, Artist, Architecture,
More information1774 Scotch Line Rd. Minden, ON K0M 2K
1774 Scotch Line Rd. Minden, ON K0M 2K0 705-286-0464 www.unimat-1.com UNIMAT & ACCESSORIES PRICE LIST APRIL 2016 Art.No Description USD 160 100 Unimat 1 Basic $299.00 160 141 Unimat Classic $529.00 160
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationKnives for the Veneer and Plywood Industry
Knives for the Veneer and Plywood Industry Knives for the veneer and plywood industry 2 3 Precision and Perfection: For optimal cutting performance, surface consistency and longevity. Our in-depth understanding
More informationGUILLOTINE SHEAR with REDUCER MODELS: S S S S S
Industrivej 3-9 DK-9460 Brovst Denmark Tel.: + 45 9823 6088 Fax: + 45 9823 6144 MANUAL GUILLOTINE SHEAR with REDUCER MODELS: 1300-30S 1500-30S 2000-30S 2500-25S 3000-20S EC declaration of conformity Hereby
More informationOPERATION AND MAINTENANCE HANDBOOK D407270XA
OPERATION AND MAINTENANCE HANDBOOK D407270XA vers. 1.0 Thank you for choosing one of Silca s high quality key cutting machines. This machine has been designed, tested and produced in our factory using
More information