IW SERIES IRONWORKERS DURMA
|
|
- Randolf Brown
- 6 years ago
- Views:
Transcription
1 IW SERIES IRONWORKERS BETTER PARTS BETTER PROFITS
2 IW SERIES IRONWORKERS STANDARD EQUIPMENT Swing Away Stripper Punching Station Section Cutting Angle Cutting Flat Bar Shearing Notching Twist and Drop Punch Holder Touch and Cut Back Stop Angle Mitering & Flat Bar Station Angle Station Large Throat and Gauging Table Channel Web Punching Bending Attachment IWS CAPACITIES Tons Five Stations Single Cylinder Operation IW CAPACITIES Tons Five Stations Dual Cylinder Operation
3 IW SERIES SINGLE CYLINDER IRONWORKERS PUNCHING STATION SECTION CUTTING The punch station is designed with versatility in mind. The design of the bolster plate, makes it possible to perform a wide range of punching. This includes the punching of flat bar, flange, angle, and channel. The station comes standard with quick change punch and die holders, as well as a swing away stripper. Also included are x & y coordinate gauge stops. This feature is useful for repetitive work. This station comes standard with blades for cutting solid round and square stock. Alternatively, it can be equipped with easily removable blades for cutting tees, channel, and I-beam profiles. There is also an adjustable hold down for clamping the profile during the cutting process. ANGLE CUTTING FLAT BAR SHEARING Blades are four sided and easily installed and rotated. The cavity is designed in such a way to allow the mitering of angles (IWS Multi only). An easy adjustable hold down provides for proper clamping of the material while it is being sheared. Shown with special Z aperture on 45 M. An easily adjustable hold down ensures proper clamping of the plate. An entry feed table has adjustable guides and stops to make sure the material is accurately placed under the cutting blades. The blades are manufactured in such a way that allows cutting of a wide range of material thickness at a low rake angle and without the need for adjustment.
4 IW SERIES SINGLE CYLINDER IRONWORKERS NOTCHING TWIST AND DROP PUNCH HOLDER This station comes standard with rectangular notching blades which allow side notching, therefore allowing notching of unlimited widths. Vee notching blades can easily be installed, and are available as an option. A twist & drop style punch holder provides for fast, easy, and accurate tool changes. SWING AWAY STRIPPER TOUCH & CUT ELECTRICAL BACK STOP A swing away style punch stripper allows proper stripping of the part. It is easily moved away for greater access to the punch and die area. 39 Back stop with electrical touch and cut feature that aligns to all shearing stations.
5 IW SERIES DUAL CYLINDER IRONWORKERS PUNCHING STATION WITH LARGE GAUGING TABLE In the dual cylinder models, two foot pedals and two power cylinders allow for two operators to be operating the machine at the same time. Another advantage to this series, is the punch cylinder cycles straight up and down instead of at an arc. This provides for better punch and die alignment. In fact actually provided for a punch press station in which you can mount a wide variety of punching applications. The punch station is designed with versatility mind. The design of the bolster plate, makes it possible to perform a wide range of punching. This includes the punching of flat bar, flange, angle, and channel. The station comes standard with quick change punch and die holders, as well as a swing away stripper. Also included are x & y coordinate gauge stops. This feature is useful for repetitive work. ANGLE CUTTING Blades are four sided and easily installed and rotated. The cavity is designed in such a way to allow the mitering of angles (IWS Multi only). An easy adjustable hold down provides for proper clamping of the material while it is being sheared. Shown with special Z aperture on 45 M. ANGLE MITERING ANGLE STATION The angle station allows mitering at 45 degrees. The capacity is less than the 90 degree mitering capabilities. The angle cavity is equipped with an easily adjustable hold down to increase sheared blank quality.
6 IW SERIES DUAL CYLINDER IRONWORKERS ANGLE MITERING & FLAT BAR STATION LARGE THROAT & GAUGING TABLE It is possible to miter the leg of an angle at 5 degrees in the flat bar shear station. A large throat and gauge table is standard on the dual cylinder models. The table is equipped with recessed measuring scales calibrated to the center line of the punch. Side and rear gauge stops are also included. A larger throat is available as an option and a 24 throat is standard on the 120 ton models. SWING AWAY STRIPPER CHANNEL WEB PUNCHING A swing away style punch stripper allows proper stripping of the part. It is easily moved away for greater access to the punch and die area. The specially shaped punch station bolster allows punching holes in the web of profiles.
7 IW SERIES DUAL CYLINDER IRONWORKERS FLAT BAR SHEARING NOTCHING An easily adjustable hold down ensures proper clamping of the plate. An entry feed table has adjustable guides and stops to make sure the material is accurately placed under the cutting blades. The blades are manufactured in such a way that allows cutting of a wide range of material thickness at a low rake angle and without the need for adjustment. This station comes standard with rectangular notching blades which allow side notching, therefore allowing notching of unlimited widths. Vee notching blades can easily be installed, and are available as an option. TOUCH & CUT ELECTRICAL BACK STOP PRESS BRAKE ATTACHMENT (OPTIONAL) 39 Back stop with electrical touch and cut feature that aligns to all shearing stations. It is possible to mount a bending attachment to the punch station. A large single vee or a four vee for thinner material is available.
8 IW SERIES IRONWORKERS SPECIFICATIONS IW Series 45 45D 55 55DT 80 80DT 110DT 165 DT Punching Tons Inch Punch Capacity Inch Throat Depth Inch Maximum Stroke Length Inch Strokes Per Minute Quat Table Size Inch 17x 6 17 x 6 21 x 9 21x x x 20 21x x 20 Table Height Inch Optional Equipment Largest Hole Inch Single Vee Press Brake Inch Multi-Vee Press Brake Inch Pipe Notching Inch Flat Shearing Flat Bar (Max Thickness) Inch Flat Bar (Max Width) Inch Blade Length Inch Angle Flange Trim Inch Working Height Inch Angle Shearing At 90 Shearing Inch 3x3x5/16 3x3x5/16 4x4x3/8 4x4x3/8 5x5x1/2 5x5x1/2 6x6x1/2 8x8x3/4 At 45 Miter Shearing Inch 2x2x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 3x3x1/4 Working Height Inch Bar Shearing Round Bar Inch Square Bar Inch Working Height Inch Optional Equipment U- Profit Shear Inch T- Profit Shear Inch I- Profit Shear Inch Notching Material Thickness Inch Rectangular (Width) Inch Rectangular Notch (Depth) Inch Vee Notcher (Side Depth x Thickness) mm Optional Equipment Triangular Notch (Thickness) Inch Triangular Notching Width Inch Triangulat Notching Depth Inch Technical Data Motorpower HP Oil Capacity Gallon Net Weight (Approx.) lb Machine Dimension (Approx.) Inch 62x57x56 62x57x61 66x68x70 82x70x80 82x70x80 92x70x80 104x70x89 127x43x90 Packing Dimension (Approx.) mm 63x28x58 63x28x72 67x28x72 83x32x72 83x32x82 93x32x82 104x32x92 43
9 AIMS FOR CONTINUOUS DEVELOPMENT s large investment in machining centers and production equipment, as well as its ISO-certified factories totaling 1,350,000 square feet and 1,000 employees, make one of the world s largest, efficient and most contemporary facilities in the world. In order to offer customer solutions and further develop patents, the Durma Research and Development center opened in Fifty engineers were added over the last two years. Designed and engineered with modern technology, Durma products are equipped with high quality and proven readily available components. Established in 1956, Durma has vast experience in building and supplying quality products. With over 60,000 machines delivered worldwide, Durma has earned a reputation as a supplier of innovative value oriented solutions. Your partner today, tomorrow, and forever.
for impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80
for impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80 HYDRAULIC STEELWORKERS COMPACT 50, 65, 80 The Compact 50, 65 and 80 are universal and compact hydraulic steelworkers. They are equipped
More informationIRONWORKERS MSIW50S MSIW66S MSIW60D MSIW71D MSIW93D
IRONWORKERS MSIW50S MSIW66S MSIW60D MSIW71D MSIW93D MSIW126D MSIW126DX MSIW192DX MSIW126D R SINGLE AND DUAL CYLINDER MACHINES 50-192 TON CAPACITY 5 STATIONS HEAVY DUTY CONSTRUCTION COMPLETELY INTEGRATED
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com C. '..-...p
More informationPII140 IRONWORKER PII140
14824 Rockbridge Road Little Rock, AR 72206 Toll Free 800-643-5839 Fax 501-897-4090 www.smfmachinetools.com sales@smfmachinetools.com IRONWORKER 6 1 5 4 2 STANDARD FEATURES 1. Mechanical Stripper Attachment
More informationSMF & MACHINE TOOLS, INC
SMF & MACHINE TOOLS, INC 800-643-5839 METAL WORKING EQUIPMENT Local 501-897-1110 Fax 501-897-1110 14824 Rockbridge Road Little Rock, AR 72206 www.smfmachinetools.com sales@smfmachinetools.com P II 0 IRONWORKER
More information14824 Rockbridge Road Little Rock, AR Toll Free Fax
14824 Rockbridge Road Little Rock, AR 72206 Toll Free 800-643-5839 Fax 501-897-4090 www.smfmachinetools.com sales@smfmachinetools.com IRONWORKER STANDARD FEATURES 1. Urethane Stripper Attachment keeps
More informationENGLISH (mm) BENDICROP SERIES
ENGLISH (mm) BENDICROP SERIES BENDICROP SERIES Metalwork companies need to perform simple bending work. GEKA has designed the BENDICROP MODELS which, apart from including L, B, A, I, cutting stations,
More informationDCB-DM SERIES BANDSAWS DURMA
BETTER PARTS BETTER PROFITS STANDARD EQUIPMENT Hydraulic Vice Synchronized Cutting Arm & Clamp System Bilateral 60 Angled Cut Digital Readout of Turn Table Motorized Turn Table Electronic Variable Cutting
More informationDCB-S SERIES BANDSAWS DURMA
DCBS SERIES BANDSAWS BETTER PARTS BETTER PROFITS DCBS SERIES BANDSAWS STANDARD EQUIPMENT Twoway 45 Angle Adjustable Clamp Hydraulic Vice Electronic Variable Cutting Speed Adjustment with Inverter Bimetal
More informationCNC SYSTEMS PUNCHING SHEARING MARKING. Trilogy Machinery, Inc.
The CNC Systems from SUNRISE are plate, angle and channel positioning systems with user-friendly interfaces. Many options are available factory-installed on Dual-Cylinder Ironworker or Punching Machines
More informationTrade of Metal Fabrication. Module 1: Basic Fabrication Unit 6: Universal Ironworker Phase 2
Trade of Metal Fabrication Module 1: Basic Fabrication Unit 6: Universal Ironworker Phase 2 Table of Contents List of Figures... 5 List of Tables... 5 Document Release History... 6 Module 1 Basic Fabrication...
More informationFBS FLEXIBLE BENDING SYSTEMS DURMA
FBS FLEXIBLE BENDING SYSTEMS BETTER PARTS > BETTER PROFITS FBS FLEXIBLE BENDING SYSTEMS FEATURES -1- Unique Box Frame Construction (Dependent Tons, Stroke, Daylight & Gap) Stress Relieved Frame Large Gaps-Strokes-Daylight
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationWELDING POSITIONING EQUIPMENT
WELDING POSITIONING EQUIPMENT It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT designs
More informationSCOTCHMAN INDUSTRIES MODEL FI M IRON WORKER
SCOTCHMAN INDUSTRIES MODEL FI-8510-20M IRON WORKER NOVEMBER 2012 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 5 2.0 SAFETY PRECAUTIONS 6 2.1 WARRANTY 7 3.0 WARNING LABELS 8-9 4.0 INSTALLATION
More informationTu r n y o u r p r e s s b r a k e o r p u n c h p r e s s i n t o a h o l e p u n c h i n g p r o f i t c e n t e r.
Tu r n y o u r p r e s s b r a k e o r p u n c h p r e s s i n t o a h o l e p u n c h i n g p r o f i t c e n t e r. U n i P u n c h M o d u l a r To o l i n g Works with existing presses Multiple holes
More informationTOOLS/ werkzeugtechnik
TOOLS werkzeugtechnik EDITORIAL In October 2006, ips-werkzeugtechnik took over the punching technology segment of DE-STA-CO Europe & Co. Werkzeugtechnik, which has earned us a new strategic position on
More informationMODEL 50514CM IRONWORKER
MODEL 50514CM IRONWORKER PRINTED FEBRUARY 2015 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 5 2.1 WARRANTY 7 3.0 WARNING LABELS 8 4.0 INSTALLATION & SET UP 10-21
More informationMODEL 5014TM IRONWORKER
MODEL 5014TM IRONWORKER PRINTED JUNE 2014 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 4 2.0 SAFETY PRECAUTIONS 4 2.1 WARRANTY 5 3.0 WARNING LABELS 6 4.0 INSTALLATION & SET UP 8 4.1 Physical
More informationYale Environmental Health & Safety 135 College Street, Suite ehs.yale.edu Page 2
Yale Environmental Health & Safety Equipment/Task Name: Equipment/Task Hazard Class: Shop Name: IRONWORKERS 4 http://ehs.yale.edu/forms-tools/toolclassification-matrix Shop Hazard Class: Purpose An ironworker
More informationHydraulic Swing Beam Shear POWERcut
RAS Reinhardt Maschinenbau GmbH RAS : Much more than just power! A concept for all requirements Do you often find burrs on the cut pieces, because you forgot to adjust the blade clearance properly? Are
More informationMC-40 CNC PUNCH. Efficient, Quality Bus Bar Production
Jin FangYuan CNC Machine Company., Ltd (JFY) is one of the premier fabrications machine tool builders in Asia. Annually, they produce over,000 CNC fabricating machine tools. M & E Values, Inc. is proud
More informationunittool punch & die co., INC. 28XX punches and dies H&O DIE SUPPLY, INC
CATALOG XX-94 28XX punches and dies unittool punch & die co., INC. Unittool punch & Die 28XX TOOLING TERMS: NET 30 DAYS. F.O.B. OUR PLANT, ST. CATHARINES, ONT. PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
More informationStrongman Metal Tools Price list February 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list February 2018 PLEASE NOTE PRICES
More informationWELDING POSITIONING EQUIPMENT. JMT offers quality machine tools for all your sheet metal fabrication needs.
WELDING POSITIONING EQUIPMENT JMT offers quality machine tools for all your sheet metal fabrication needs. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT sells and services
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationCOMPANY HISTORY CONTENTS. Di-Acro Metal Fabricating Equipment
COMPANY HISTORY Di-Acro Metal Fabricating Equipment Metal fabrication equipment has been our specialty for more than 60 years! We are proud to continue the traditional craftsmanship and quality that our
More informationMS HYDRAULIC GUILLOTINE SHEAR
MS-25-10 HYDRAULIC GUILLOTE SHEAR MS-25-10 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationSwing Beam Shear SMARTcut / PRIMEcut
RAS Reinhardt Maschinenbau GmbH The perfect cut The RAS SMARTcut and RAS PRIMEcut swing beam shears combine all the features and benefits you expect from the latest shearing technology. Clean and square
More informationDesign and Analysis of Press Tool Assembly
Design and Analysis of Press Tool Assembly Raveendra M.Tech Student ABSTRACT Press working may be defined as a chip less manufacturing process by which various components are made from sheet metal. This
More informationSeries 8 Mark II. Universal Vertical Band Saw
Series 8 Mark II Universal Vertical Band Saw Capacity 18 x 22 Marvel Series 8 Mark II Universal Tilt-Frame Vertical Band Saw The Marvel Series 8 Mark II has a capacity of 18 x 22 (18 diameter round) with
More informationMaintenance Manual Original Instructions - IW6004
Maintenance Manual Original Instructions - IW6004 Maintenance Manual 1 General Operator and Supervisor Information Signal Word Definition Signal Word Panel 2 Maintenance Precautions Maintenance Schedule
More informationHydraulic NC Guillotine & NC Panbrake Package Deal
Product Brochure K059 METALMASTER HG-2504 & PB-830T Hydraulic NC Guillotine & NC Panbrake Package Deal Ezy-Set NC-89 Guillotine - 2500 x 4mm, NC Ezy Touch Screen Panbrake 2500 x 4mm Page 1 of 6 Specifications
More informationBasic steps to time the Gammill quilting machine s rotary sewing hook
Basic steps to time the Gammill quilting machine s rotary sewing hook 1.) Turn the machine off and unplug it. 2.) With the needle bar in the raised position, remove the bobbin and bobbin case. 3.) Remove
More informationHIGH SPEED CUTTING QUANTITY Excellence in cutting
HYDRAULIC SWING SHEAR MS7-4x2500 HIGH SPEED CUTTING QUANTITY Excellence in cutting STANDARDS: - Swing beam shesrs with Euro design - ESTUN E21s NC Controller System - Motorized blade gap adjustment - 600mm
More informationOperations Manual. Serial Number: Original Instructions - IW7503
Operations Manual Serial Number: Original Instructions - IW7503 Operations Manual 1 General Declarations of Conformity Company Profile Warranty Machine Identification Operator and Supervisor Information
More informationMEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905
MJ MEREEN-JOHNSON 400 Series Fixed Arbor Dip Chain Multiple Rip Saws Setting the Standard Since 1905 400 SERIES MULTIPLE RIP Setting the Standard Guaranteed Glue Joint Accuracy Minimal Maintenance High
More informationBest MATERIALS.com Discount Warehouse
Best MATERIALS.com Discount Warehouse Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not
More informationLockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
More informationOPERATOR S MANUAL MODEL 207 WORK SAFELY AT ALL TIMES WITH QUALIFIED OPERATORS ONLY. QUALIFIED OPERATORS NAME SHIFT DA TE
OPERATOR S MANUAL WORK SAFELY AT ALL TIMES WITH QUALIFIED OPERATORS ONLY. MODEL SERIAL# We, the undersigned, have read and understand the OPERATOR S MANUAL. QUALIFIED OPERATORS NAME SHIFT DA TE Safety
More informationBENDER/BRAKE. Model: CB-24 CB-30 OPERATION MANUAL
BENDER/BRAKE Model: CB-24 CB-30 OPERATION MANUAL Save This Manual You will need the manual for the safety warning and precautions, assembly instructions, operating and maintenance procedures, parts list
More informationENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel malco tool book better ideas for the real world. S5R Compact 5 in. (127
More informationANGLE AND FLAT BAR LINE ABL-74T
ANGLE AND FLAT BAR LINE ABL-74T ABL-74T The ABL-74T is our most economical, entry level machine for punching and shearing angle and flat bar. It has a combination of features requested by our customers.
More informationTURN METAL INTO MONEY With our range of HAND POWERED METAL WORKING MACHINES THINK OF THE POSSIBILITIES IF YOU COULD MAKE THESE:
TURN METAL INTO MONEY With our range of HAND POWERED METAL WORKING MACHINES THINK OF THE POSSIBILITIES IF YOU COULD MAKE THESE: MULTI BEND SYSTEMS *Bend: *Bend: Mild Mild Steel, Steel, Stainless Stainless
More informationProductive CNC punching with affordable configurations for all fabrication shops. Available Options:
Machine Specifications Working Range CP 750............................... 30" 80" CP 1000.............................. 40" 80" CP 1250.............................. 50" 80" Maimum sheet length.................................
More informationSCOTCHMAN INDUSTRIES MODEL DO M IRONWORKER
SCOTCHMAN INDUSTRIES MODEL DO-8514-20M IRONWORKER JULY 2012 TABLE OF CONTENTS SECTION DESCRIPTION PAGE # 1.0 INTRODUCTION 5 2.0 SAFETY PRECAUTIONS 6 2.1 WARRANTY 7 3.0 WARNING LABELS 8 4.0 INSTALLATION
More informationSPECIFICATIONS MS-10-5 MS Cutting capacity (Rated 80,000 PSI Tensile) Cutting length 62 in "
MS-25-10 STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere in the stroke the ram returns to "up" position. Two
More informationDanly Die Sets CATALOG DIE SETS. Quality & performance Quick delivery Precision Components
Danly Sets TM CATALOG DIE SETS Quality & performance Quick delivery Precision Components 1 TM Danly Sets www.anchordanly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On Danly Sets
More informationDURMA BANDSAWS HB & DCB SERIES
DURMA BANDSAWS HB & DCB SERIES BETTER PARTS BETTER PROFITS The Company As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands and recognizes the challenges,
More informationMETALMASTER HG-3216VR. Hydraulic NC Guillotine - Variable Rake x 16mm Mild Steel Shearing Capacity. Product Brochure
Product Brochure S9615 METALMASTER HG-3216VR Hydraulic NC Guillotine - Variable Rake 3200 x 16mm Mild Steel Shearing Capacity Page 1 of 5 Right View Front View Side View Rear Guarding 3 Safety Electronic
More informationHYDRAULIC IRONWORKER MHM 70. Operation Manual
HYDRAULIC IRONWORKER MHM 70 Operation Manual MIHO HYDRAULIC IRONWORKER This MIHO Ironworker has been developed to give you, the user, a reliable long service- low maintenance machine tool. These machines
More informationSERVING WESTERN CANADIAN METAL MANUFACTURING AND FABRICATION INDUSTRIES
SERVING WESTERN CANADIAN METAL MANUFACTURING AND FABRICATION INDUSTRIES Catalogue 312 CNC Turret Punch Presses 20 and 30 metric ton Hydraulic press drives 39 x 39 to 60 x 100 blank size Thick and thin
More information# in 1 Metal Worker Auxiliary Operating Instructions
340 Snyder Avenue, Berkeley Heights, NJ 07922 www.micromark.com MMTechService@micromark.com Tech Support: 908-464-1094, weekdays, 1pm to 5 pm ET #86556 3 in 1 Metal Worker Auxiliary Operating Instructions
More informationHow to use. Use example. Non-scratch sheet prevents die marks. Tight-knit super fiber provides a working life of many hundreds cycles.
How to use Small to Medium dies Fix Kizu-non on the die shoulder with masking tape. Should not be crinkled. *Cut Kizu-non with scissors for desired length. Large dies Fix Kizu-non on each die shoulders.
More informationOperating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
More informationSTANDARD STANDARD PRODUCT CATALOG SHEET METAL MACHINERY SHEET METAL MACHINERY
STANDARD STANDARD SHEET METAL MACHINERY SHEET METAL MACHINERY PRODUCT CATALOG Standard Sheet Metal Machinery, Inc., is incorporated in Lisbon, Iowa USA. The company speciaizes in sales and service of machinery
More informationSeamers, Folding Tools & Brake
Hand Seamers with Die-Cast Zinc Jaws S5 Compact 5 (127 mm) Jaws with Big 2 (51 mm) Bending Depth Hand Seamers with Forged Steel Jaws Seamers, Folding Tools Not for use with steel S9 Big 9 (229 mm) Jaws
More informationMetal Working Processes
Metal Working Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 CLASSIFICATION OF MANUFACTURING PROCESSES TOPIC OUTLINE What is Sheet Metal? Sheet Metalworking
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More information40 & 50 Foot PS-1 Box Car Assembly Instructions
40 & 50 Foot PS-1 Box Car Instructions Push the #2100 coupler/stirrup assembly onto the ends of the metal floor. Slide them into the slots and slightly lift the ends (wings), then press firmly on the front
More informationALWAYS disconnect the power source before using the Betterley UNA-GAUGE with any power tool or machine!
Betterley UNA-GAUGE Thank you for purchasing the Betterley UNA-GAUGE. You will find the UNA-GAUGE provides quick adjustments and alignment of most tools and machinery with extreme accuracy. The versatile
More informationContents. Contents G BEND Bending G MASTER Bending G HD Bending 8-11 G PRO - Bending. 4 The company 6 Why Boschert Gizelis?
Hajlítás és Vágás Contents 4 The company 6 Why Boschert Gizelis? Contents 8-11 G BEND Bending 4 The company 12-15 G MASTER Bending 6 Why Boschert Gizelis? 16-19 G HD Bending 8-11 G PRO - Bending 20-23
More informationTENSILKUT ENGINEERING
TENSILKUT ENGINEERING For Accurate Test Specimens Manufacturer of equipment for the accurate preparation of physical test specimens since 1955 SIEBURG INTERNATIONAL, INC. 1901 Clydesdale Street, Maryville,
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from RAIMANN: FlexiRip is synonymous with flexible ripping The original Jrion from Raimann stands for
More informationNUMBER 1 Di-Acro Hand Notcher
OPERATOR S MANUAL & INSTRUCTIONS NUMBER Di-Acro Hand Notcher Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 373 Progress Street N.E. Canton, Ohio 705 330-55-9 330-55-00 (fax) Revised 0/0 Sale or distribution
More informationDOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION
DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION P99-1 R-10C SINGLE END COPING SYSTEM Designed for a dedicated and accurate coping center with single or multiple part capability. Operation
More informationThe Fine-Art of Sheet Metal Bending
The Fine-Art of Sheet Metal Bending Introduction...... 1 Bend allowances........2 Reverse engineering the k-factor........ 4 Principle types of bending........ 5 Tips and tricks....... 7 Other common types
More informationProfiform 200 Profiform 320. Operating manual
Profiform 200 Profiform 320 Operating manual Profiform 200 / Profiform 320 Operating manual Page 1 Table of contents 1. General information Page 2 2. Profile of the Profiform sheet metal working machines
More informationDi-Acro 36 Power Shear
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro 36 Power Shear Di-Acro, Incorporated PO Box 9700 Canton, Ohio 44711 3713 Progress Street N.E. Canton, Ohio 44705 330-455-1942 330-455-0220 (fax) Revised 01/02 Sale
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II SHEET METAL FORMING PROCESSES Sheet metal Process in detail Cutting (Shearing) Operations Manufacturing Technology In this operation, the work piece is stressed beyond
More informationTOOL DESIGN - MANUFACTURING DESIGN SPECIFICATIONS FOR TOOLING AND EQUIPMENT SECTION H - DIE DESIGN TABLE OF CONTENTS. H.1 General...
TABLE OF CONTENTS H.1 General...Page 2 H.2 General Die Layout...Page 2 H.3 General Die Features...Page 2 H.4 Specific Die Type Features...Page 5 H.5 Special Punches and Die Bushings...Page 6 H.6 Wire E.D.M...Page
More informationShay Tender Frame Fabrication
Shay Tender Frame Fabrication Nelson Riedel Nelson@NelsonsLocomotive.com Initial:3/15/03 Last Revised: 06/05/2004 This page shows additional detail on the tender frame members and some of the processes
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II SHEET METAL FORMING PROCESSES Sheet Metal Introduction Sheet metal is a metal formed into thin and flat pieces. It is one of the fundamental forms used in metalworking,
More informationSLW 6 Channel Letter Brake. User Guide. Operation and Mounting Instructions
SLW 6 Channel Letter Brake User Guide Operation and Mounting Instructions Scope This document describes the operation and mounting instructions for the SLW 6" Channel Letter Brake. Please read all instructions
More informationFUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Dies & Processes-SD
FUNDAMENTAL MANUFACTURING PROCESSES Sheet Metal Stamping Dies & Processes-SD SCENE 1. SD20A, CGS: Dies & Die Functions white text, centered on background FMP BKG, motion background SCENE 2. SD20A, SME4311,
More informationBEAST THE. Tube and Pipe Notcher Operating Instructions. Notches In Bends Straight Notches. Angled Notches. Offset Notches
Copyright (c) 2007 J D SQUARED INC. www.jd2.com THE BEAST Tube and Pipe Notcher Operating Instructions Notches In Bends Straight Notches Angled Notches PATENT PENDING Offset Notches Assembly After unpacking
More informationMETAL SHEAR SPECIALISTS MS-25-5 HYDRAULIC GUILLOTINE SHEAR
MS-25-5 HYDRAULIC GUILLOTE SHEAR MS-25-5 HYDRAULIC GUILLOTE SHEAR STANDARD Low speed electric motor & low hydraulic working pressure ensures long life. If the remote foot-pedal control is released anywhere
More informationHolemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationDesign and Analysis of Progressive Die for Chain Link Plate
Design and Analysis of Progressive Die for Chain Link Plate Md Inaithul Rehaman #1, P Satish Reddy #2, Matta Manoj #3, N.Guru Murthy #4 ME Department, Prasiddha College of Engg and Technology, Anathavaram
More informationMIL-STD B (SH) UPDATE
MIL-STD-2042-5B (SH) UPDATE Method 5A1 Insert Equipment and materials (to be added to table 5A1-I) Pliers 3.2.2.2 Cable and fiber preparation for Fiber Systems International backshells. Step 1: Ensure
More informationACCURL Genius Guillotine Shears. Model : MS8-13x3200. (Excellent cut, Perfect speed)
ACCURL Genius Guillotine Shears Model : MS8-13x3200 (Excellent cut, Perfect speed) Excellent cut, perfect speed. ACCURL CNC Hydraulic Guillotine Shear can cut all kind of metal sheet to maintain the highest
More informationNo. 412, 414, 416 Operations Manual
No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket
More informationAMP MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: Your Global Source for Wire Processing Perishable Tooling
AMP MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: CLS CLS IV CLS IV + IV-A AM-4 STRIPPER Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More information$42, $46, Product Brochure For S961. Features
HG-3212VR - 3200 x 12mm Mild Steel Shearing Capacity 1-Axis Ezy-Set NC-89 Go-To Control & Hardened Ballscrew Backgauge ORDER CODE: MODEL: Ex GST Inc GST $42,500.00 $46,750.00 S961 HG-3212VR Shearing Capacity
More informationCARPENTER MACHINE SERIES
CARPENTER MACHINE SERIES THIS SECTION CONTAINS BLADES FOR THE FOLLOWING MACHINE SERIES: 47C M-77 72A-S M93 / M97 / M98 / M99 72B Your Global Source for Wire Processing Perishable Tooling www.lakesprecision.com
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationTHE CLASSIC ONE-TWO PUNCH
THE CLASSIC ONE-TWO PUNCH TOP BENDERS TUBE, PIPE AND PROFILE BENDING MACHINERY TB80 Top Bender Scan this QR Code now to watch TB80 Top Bender in action! 3 Tube Capacity 1Year Limited WARRANTY WARRA Additional
More informationPunching 3/16" diameter round hole in up to 3/16" thick (flat strip metal).
Wrought Iron Handicrafts, Inc. 3950 10 th Ave NW Rochester MN 55901-1336 507-289-0836 phone 800-456-7738 phone info@metalcraftusa.com email The ultimate dream machine for fabricators and ornamental metal
More informationModule 3 Selection of Manufacturing Processes
Module 3 Selection of Manufacturing Processes Lecture 4 Design for Sheet Metal Forming Processes Instructional objectives By the end of this lecture, the student will learn the principles of several sheet
More informationThe ultimate affordability in valve seat machining
The ultimate affordability in valve seat machining SG7 cylinder head seat & guide machine Light Weight Work Head The SG7 has a light weight work head for extremely fast and accurate centering for the ultimate
More informationCONTENTS PRECAUTIONS BEFORE STARTING OPERATION PREPARATION FOR OPERATION CAUTIONS ON USE OPERATION
CONTENTS PRECAUTIONS BEFORE STARTING OPERATION ------------------------------------- 1 PREPARATION FOR OPERATION 1. Adjustment of needle bar stop position ---------------------------------------------------------
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationAKS has partnered with many high-quality machinery sales dealers and has an extensive service and support network.
Advanced Kiffer Systems, Inc. (AKS), a subsidiary of Kiffer Industries, is headquartered in Cleveland, OH, and has been at the forefront of manufacturing high-quality machinery for over 100 years since
More informationAXIOM Classic Trim. Assembly and Installation Instructions
AXIOM Classic Trim Assembly and Installation Instructions 1. GENERAL 1.1 Description Axiom Classic Trim is a perimeter trim system designed for use with a variety of Armstrong suspension systems. Classic
More informationHEAVY DUTY WEIGH FEET KIT. Installation Instructions
HEAVY DUTY WEIGH FEET KIT Installation Instructions PUBLISHED BY Gallagher Group Limited Kahikatea Drive, Private Bag 3026 Hamilton, New Zealand www.gallagher.co Copyright Gallagher Group Limited 2010.
More informationHydraulic Clamp Carrier. Installation & Operation Manual
Hydraulic Clamp Carrier Installation & Operation Manual Hydraulic Clamp Carrier Installation & Operation Manual Quick Machinery Company 8272 Peninsula Drive Kelseyville, CA 95451 phone: (707) 272-6719
More information