PRODUCT CATALOGUE and PRICE LIST 2015

Transcription

1 M E T A L A P P L I C A T I O N S PRODUCT CATALOGUE and PRICE LIST 5 G r a t i n g s f o r i n d u s t r y, l o g i s t i c s a n d a r c h i t e c t u r e

2 For metal professionals who want to accomplish more in less time Welcome to MEA Metal Applications, a leading supplier of gratings and sliding hardware. As part of the MEA Group, we work closely with professionals from commerce, manufacturing, construction and logistics. It is a partnership that has allowed us to understand their needs and requirements. This long-standing and extensive practical knowledge is the strong foundation on which we develop products that will help to make your work significantly faster, easier and simpler. Durable quality, expert advice The range of MEA gratings includes standard and special gratings, MEAstep stair treads and landings, plus the MEAstep staircase construction kit. Our gratings offer long-term protection against corrosion thanks to one of the most modern hot-dip galvanising technologies in Europe (compliant with DIN EN ISO 46). Our technical customer service department remains at your service to assist with your projects especially also for queries concerning special gratings.

3 Contents Industrial gratings P. 4 Industrial gratings SP P. 5 MEAstep XSL P. 6 MEAstep XSL landings P. 8 MEAstep staircase construction kit P. 9 MEAstep standard stair treads P. 0 MEAstep standard stair treads SP P. 0 Standard gratings P. Garage gratings P. 3 Grating sheets, untreated, ungalvanised P. 4 Frames P. 5 Slip-resistant nosing, non-galvanised P. 6 Accessories for gratings P. 7 Special gratings P. 9 Functional stainless steel gratings P. 23 I N T R O D U C T I O N 03 Important information about the 5 price list All prices are recommended retail prices and valid until Unless stated otherwise, prices are per piece (retail price = usually pallet). The VAT applicable in each instance must be added to the list prices printed on this price list. Our General Terms and Conditions apply exclusively. The currently valid General Terms and Conditions can be found at We will be pleased to forward these to you on request. When using our products, please observe the information in our brochures and in the installation and assembly instructions. We reserve the right to make changes that reflect technical progress. There is no right of return for custom-fabricated products. Delivery Delivery within D, AT and CH is free of charge for orders with a net goods value of 0. EUR and over. For orders below 0. EUR: a low-quantity surcharge of 75. EUR applies. LPT (logistics, packaging, transport): 3 cents per kg, with a minimum of 5. EUR per order. Delivery times Normally 3-5 days. Some items that are not regular stock items may entail longer delivery times. Please ask us! OUR CUSTOMER SERVICE EXISTS FOR YOUR BENEFIT Germany Czech Republic MEA Metal Applications GmbH Sudetenstrasse 8655 Aichach T +49 (0) F +49 (0) E info.gitterroste@mea.de MEA Metal Applications s.r.o. Domažlická ul. č Plzeň T F E info.cz@cz.mea.de France Romania MEA Métal Applications France S.A.S.U. Avenue Jean Prouvé 8 Saint-Dié-des-Vosges T F E info.f@fr.mea.de MEA Metal Applications SRL Str. Valcele, Nr. A, jud. Cluj, RO 4050 Dej T F E info.ro@mea.de Visit us on the internet at: V a l i d f r o m

4 Material Group IR Industrial gratings Pressure-locked grating, with flat-iron surround, overall height 30 mm, hot-dipped galvanised, bar-in-bar press-lock bonding. A maximum deflection of /0 of the span, however not than 4 mm, will take place under loading. Wheel load for a 0 x 0 mm load contact area. Supporting bar (SB) short direction, mesh size 0 mm Grating outer dimensions SB Permissible distributed load kn/m 2 Permissible wheel load kn x 0 4, 3,96 9, , x ,8 3,7, , x 0 2,6 2,64 2, , 000 x 6, 2,26 4, , x 900,95,98 6, , x 000 *,52 8, ,30 00 x 000,52 9, ,85 0 x 000,52 2, ,40 0 x 000,52 26, , 000 x 0 62,22 5,95 4, , 000 x ,2 4,76 6, , 000 x 0 3,74 3,96 9, , x 24,30 3,40 22, , x 900 7,92 2,97 24, , x 000 *,76 2,29 27, ,30 00 x 000,76 2,29 30, ,55 0 x 000,76 2,29 32, ,00 Underlined dimension is supporting bar direction *Designed for safety-assured installation, Supporting bar height / thickness Note MEA Industrial gratings 000 x 000 safety-assured installation. Complies with the recommendations of trade associations and DIN Supporting bar (SB) long direction, mesh size 0 mm Grating outer dimensions SB Permissible distributed load kn/m 2 Permissible wheel load kn A feature of MEA installation safety: An interlocking of adjacent gratings ensures that the supporting bar always rests on the substructure. Any risk of liability is ruled out: No danger of accidents due to incorrectly inserted gratings. Utility patent protection 0 x x x 000 x x x 000 * 000 x 0 0 x x x 000 x x x 000 * 000 x 0 3,78,76,76,76,76,76,76 5,67,52,52,52,52,52,52 0,87 2,29 2,29 2,29 2,29 2,29 2,29,3 9,2,0 2,7 4,5 6,2 8,9 2,5 4,3 6,7 9,4 22, 24,7 27,4 32, ,90 34,90 38, 44,30 49,80 55,30 66,40 4, 47, 52,80 60,00 67,90 75,30 90,00 Underlined dimension is supporting bar direction *Designed for safety-assured installation, Supporting bar height / thickness 4 Valid from

5 Industrial gratings Material Group IR Pressure-locked grating, with flat-iron surround, overall height 30 mm, hot-dipped galvanised, bar-in-bar press-lock bonding. A maximum deflection of /0 of the span, however not than 4 mm, will take place under loading. Wheel load for a 0 x 0 mm load contact area. Industrial grating, supporting and filler bars slip-resistant, without frame Grating outer dimensions SB Permissible distributed load kn/m 2 Permissible wheel load kn x 000,52 5, , x 000,52 8, ,60 0 x 000,76 2,29 32, , Industrial grating without frame, mesh size 30/0 mm Grating outer dimensions SB Permissible distributed load kn/m 2 Permissible wheel load kn x 6, 2,26, , 000 x 000 *,52 23, ,40 Industrial gratings SP Material Group IR Welded pressure-locked grating, with flat-steel surround, total height 30 mm, hot-dipped galvanised. Mesh size 34/38 mm Grating outer dimensions SB x 0 9, , x 600, , x 0 3, , x 5, , x 900 7, , x 000* 8, , x 00 2, , x 0 2, , 000 x 0 27, , x 00 36, , 000 x 44, , x 30 5, , x 0 3, , x 600 5, , 000 x 0 8, , x, , x , , x 000*, , x 00 30, , x 0 32, , x 0 37, , 000 x 00 49, , 000 x 6, ,0 000 x 30 75, ,90 Underlined dimension is supporting bar direction, Supporting bar height / thickness; *Please note: the supporting bars must rest on the substructure. Any confusion regarding the supporting bar direction during installation must be avoided. Valid from

6 Material Group ST MEAstep XSL MEAstep XSL combines lightness with safety and strength. An extremely attractive appearance has been achieved through a re-designed load-bearing structure. Filler bar at right angles to the direction of travel even for mesh size 30/0. Suitable for accessways to factory equipment and machinery Compliant with DIN and DIN EN ISO for.5 kn, respectively 5.0 kn/m 2, applied across an area of 0 x 0 cm Suitable for all other applications and specifically also for emergency exit stairs! Compliant with DIN (category T and T2) DIN EN 99-- Eurocode : (Actions on load-bearing structures) for 2.0 kn applied across an area of 5 x 5 cm, respectively 5.0 kn/m 2 Slip resistance classification R (R3 possible) Grating stair tread, mesh size 0, to DIN Length Width (w) SB n /,5 3, ,0 600 /,5 3, ,40 0 /,5 4, ,40 0 /,5 4, , /,5 4, , /,5 4, , /,5 80 5, , /,5 5, , 900 /,5 5, , /,5 80 6, , 000 /,5 5, , /,5 6, , /,5 80 6, , 00 /,5 7, ,00 0 /,5 7, ,30 0 /,5 7, , 0 /,5 80 8, , 300* /,5 6, ,30 * Not a stock item; please ask us with regard to delivery time. 300* 400* 400* 0 0* /,5 /,5 /,5 /,5 /, , 6,7 9,8 9,8 0, ,60,30 5,30 5,0 53,60 Supporting bar height / thickness Grating stair tread, supporting and filler bars slip resistant, mesh size 0, to DIN Length Width (w) SB n /,5 4, , Important information Custom dimensions and lengths of up to 3 metres possible. If necessary, please get in touch with the customer service department Supporting bar height / thickness /,5 /,5 6,2 7, ,30 39, 6 Valid from

7 MEAstep XSL Material Group ST Grating stair tread, mesh size 30/0, to DIN Length Width (w) SB n /,5 4, , 600 /,5 4, ,80 0 /,5 4, ,80 0 /,5 5, ,90 /,5 5, , /,5 /,5 /,5 /,5 80 6, 6,6 6,4 6, ,90 37,0 38,60 40,80 MEAstep XSL Patent No * /,5 80 7, , /,5 7, , 000 /,5 7, , 000 /,5 80 8, ,90 00 /,5 8, , 0 /,5 8, ,60 0 /,5 9, , 0 /,5 80 0, ,00 300* /,5 0, ,30 300* 400* 400* 0 0* /,5 /,5 /,5 /,5 /, ,6,5 2,4 2,3 3, ,30 69,90 73, 75,40 78,80 * Not a stock item; please ask us with regard to delivery time. Supporting bar height / thickness Anti-slip nosing b 55 Ø3 R6,5 R6, n 30 Important information Custom dimensions and lengths of up to 3 metres possible. If necessary, please get in touch with the customer service department. Valid from

8 Material Group ST MEAstep XSL landings To complement our new MEAstep XSL range, we have now also developed a matching solution for landings and intermediate landings. Here again ease of use, safety and sturdiness are integral to our standards. This results in a very uniform and appealing mesh pattern for the user. Thanks to a low weight, their installation and fitting are just as easy as the installation of the MEAstep XSL. The continuous, uniform mesh pattern (available in mesh sizes 0 and 30/0) gives the staircase builder unlimited and completely new design options. The attractive appearance is compelling across the entire range. Stair treads and landings from MEA Metal Applications GmbH with a uniform mesh pattern in the size 30/0. MEAstep XSL landings and intermediate landings are fabricated from S 2 JR steel and hotdip galvanised to DIN EN ISO 46 in a full-immersion process. In addition to standard sizes such as 600 x 000, x 000, 000 x 000 and 0 x 000 the MEAstep XSL design is available in practically every conceivable shape and size, with but also without an anti-slip nosing. Put us to the test! Important information Custom dimensions and lengths of up to 3 metres possible. If necessary, please get in touch with the customer service department. 8 Valid from

9 MEAstep staircase construction kit Material Group TS The MEAstep staircase kit for exterior and interior use offers outstanding benefits and remarkable innovations. All steel parts are hot-dip galvanized to DIN EN ISO 46; all bolts, nuts, washers and other small parts have been given a special coating and offer excellent corrosion protection. Every MEAstep staircase construction kit includes a single-sided balustrade (able to be fitted to both sides), MEAstep XSL treads, standard, tread width 000 mm x depth mm, mesh size 0, all the required accessories, assembly parts, installation instructions, stackable special pallet box 2.40 m x 0.80 m. MEAstep staircase construction kit Design Type 76, ,00 Type 2 37, ,00 Type 3 3, ,00 TS Bracing strut Length , , , , 000 7, ,28 0 7, ,30 0 8, ,43 MEAstep Type MEAstep Type 2 MEAstep Type 3 Note Alternative designs, i.e. anti-slip tread, tread widths from 600 mm,600 mm, mesh width 30/0 are also possible. Prices on request. Valid from

10 Material Group ST MEAstep standard gratings Pressure-locked grating treads, with double perforated anti-slip nosing, bolt-on stringers, anti-slip classification R to DIN 530, hot-dipped galvanised, bar-in-bar press-lock bonding. Permissible point load.5 kn, load contact area 00 x 00 mm, maximum deflection l/300 but no larger than 6 mm as per DIN EN ISO Grating stair tread, mesh size 0 mm, to DIN Length Width (w) SB n in mm /,5 3, , /,5 4, , /,5 80 4, , 0 4, ,40 0 5, , , ,00 4, , 5, , 80 6, , /2 6, , 900 /2 6, , /2 80 7, , 000 /2 6, , /2 7, , /2 80 8, , Detail: Supporting bar is supported laterally. Extremely safe since bearing bars are supported directly! /2 40/2 40/2 Supporting bar height / thickness 80 8,5 9,5 0, ,30 34, 38, Materialgruppe ST MEAstep standard gratings SP Welded pressure-locked grating treads, with double perforated anti-slip nosing, bolt-on stringers, antislip classification R0 to DIN 530, hot-dipped galvanised. Permissible point load.5 kn, load contact area 00 x 00 mm, maximum deflection l/300 but no larger than 6 mm as per DIN EN ISO Grating stair tread, mesh size 34/38 mm, to DIN Length Width (w) SB , , , , , ,90 5, , 5, ,90 6, , 000 7, , 000 8, , , , /2 8, , /2 9, , 0 40/2 0, , Supporting bar height / thickness 0 Valid from

11 Standard gratings Material Group NR Pressure-locked grating, mesh size 30 x 30 mm, with U-profile surround. Grating fullimmersion hot-dipped galvanised, foot trafficable, every intersection load bearing through bar-in-bar press-lock bonding. Matching hot-dipped galvanised frames on page 5. Grating without frame, mesh size 0 mm, height mm Frame outer dimensions x 0 2, , x 300 2, ,0 600 x 400 3, ,80 0 x 400 3, , x 300 3, , x 400 4, , x 0 5, ,90 x 600 6, , x 400 4, , 900 x 0 5, , 000 x 300 4, , x 400 5, , 000 x 0 6, , x 600 6, ,00 00 x 400 5, , 00 x 0 7, ,40 0 x 0 7, ,90 0 x 600 9, ,80 Grating without frame, mesh size 0 mm, height mm Frame outer dimensions x 0 6, , x 600 7, , 900 x 0 6, , 000 x 0 7, , 000 x 600 8, ,90 0 x 0 9, ,40 0 x 600 0, ,30 Note The supporting bar is in each instance identified by the underlined dimension. The grating outer dimensions will always be approx. 0 mm smaller than the frame outer dimensions. Valid from

12 Material Group NR Standard gratings Pressure-locked grating, mesh size 30 x 30 mm, with U-profile surround. Grating fullimmersion hot-dipped galvanised, foot trafficable, every intersection load bearing through bar-in-bar press-lock bonding. Matching hot-dipped galvanised frames on page 6. Grating without frame, mesh size 0 mm, height 30 mm Frame outer dimensions x 0 8, , x 600 0, ,30 00 x 0 9, , 0 x 0 0, , 0 x 600 2, ,90 Pressure-locked grating, mesh size 30 x 0 mm, with U-profile surround. Grating fullimmersion hot-dipped galvanised, foot trafficable, every intersection load bearing through bar-in-bar press-lock bonding. Matching galvanised frames on page 5. Grating without frame, mesh size 30/0 mm, height mm Frame outer dimensions x 0 3, , x 300 3, , x 400 4, ,90 0 x 400 5, , x 300 4, , x 400 5, , x 0 7, ,90 x 600 8, , x 400 6, , x 0 8, , x 300 5, , x 400 7, , x 0 8, , x 600 0, ,60 00 x 400 7, ,0 00 x 0 9, ,90 00 x 600, ,0 0 x 0 0, , 0 x 600 2, , Note The supporting bar is in each instance identified by the underlined dimension. The grating outer dimensions will always be approx. 0 mm smaller than the frame outer dimensions. 2 Valid from

13 Standard gratings Material Group NR Pressure-locked grating, mesh size 30 x 0 mm, with U-profile surround, grating fullimmersion, hot-dipped galvanised, foot trafficable, every intersection load bearing through bar-in-bar press-lock bonding. PMatching galvanised frames on page 5. Grating without frame, mesh size 30/0 mm, height mm Frame outer dimensions x 600 4, ,0 Expanded metal grating without frame 0 x mm, total height mm, full-immersion hot-dipped galvanised. Offset supporting bars make this suitable for a mm MEA frame. Matching galvanised frame on page 5. Grating without frame, expanded metal, height mm Frame outer dimensions x 400 3, ,90 Garage gratings Materialgruppe NR Pressure-locked grating, mesh size 30 x 30 mm, with U profile, full-immersion hot-dipped galvanised, every intersection load bearing through bar-in-bar press-lock bonding. Matching galvanised frames on page 6. Grating without frame, mesh size 0 mm Frame outer dimensions SB Zulässige Radlast kn x 300 /,5 5,, , x /,5 4, 3, ,0 0 x 0 30/,5 3,40 4, ,0 600 x /,5 4, 7, , x 0 30/,5 9,00 3, ,0 2 x 0 30/,5 9,00 4, , 000 x 2 30/,5 9,00 4, ,80 2 x 2 30/,5 9,00 5, ,60 Supporting bar height / thickness Note The supporting bar is in each instance identified by the underlined dimension. The grating outer dimensions will always be approx. 0 mm smaller than the frame outer dimensions. Valid from

14 Material Group LM Grating sheets, untreated, ungalvanised Pressure-locked grating sheets, height mm Grating outer dimensions SB Mesh x 3000 /2 0 52, ,80 0 x 3000 /2 30/0 69, , Supporting bar height / thickness Pressure-locked grating sheets, height 30 mm Grating outer dimensions SB Mesh x , ,80 0 x /0 77, ,60 0 x , ,60 0 x /0 9, ,0 Supporting bar height / thickness Pressure-locked grating sheets, height 40 mm Grating outer dimensions SB Mesh x /3 0 9, ,0 0 x /3 30/0 47, , Supporting bar height / thickness Additional mesh sizes and supporting bar thicknesses on request Welded pressure-locked grating sheets, height 30 mm Grating outer dimensions SB Mesh x /38 96, , x /38 42, ,60 Supporting bar height / thickness 4 Valid from

15 Frames Material Group NR Hot-dipped galvanised frames for pressure-locked gratings. Separate frames for gratings Mesh size 0 mm, mesh size 30/0 mm and expanded metal Frame outer dimensions Grating height x 0, , x 300, , x 400, ,0 0 x 400, , x 300, ,0 x 400, , x 0, , x 600, , x 400, ,0 900 x 0, , x 300, , x 400, , x 0, , 000 x 600, ,80 00 x 400, ,40 00 x 0, ,80 00 x 600, ,90 0 x 0 2, ,0 0 x 600 2, ,80 Separate frames for gratings, mesh size 0 mm and mesh size 30/0 mm Frame outer dimensions Grating height x 300, ,30 x 0, ,60 x 600, , x 0, , x 0 2, , x 600 2, ,0 0 x 0 2, ,00 0 x 600 2, ,30 Please note! Frames fully exposed to weathering must be set into a suitable mortar, otherwise a risk of corrosion exists! Valid from

16 Material Group NR Frames Hot-dipped galvanised frames for pressure-locked gratings. Individual frames for gratings, mesh size 0 mm Frame outer dimensions Grating height x , , x , ,90 00 x , ,80 0 x , ,30 0 x , ,90 Individual frames for gratings, mesh size 0 mm Frame outer dimensions Grating height x 0 30, ,40 2 x , ,0 000 x 2 30, ,80 2 x 2 30, , 400 x , , 0 x , , 600 x , , Material Group NR Anti-slip nosing, non-galvanised Anti-slip nosing, double perforated, loose, untreated Outer dimensions Material , , , ,60 Please note! Frames fully exposed to weathering must be set into a suitable mortar, otherwise a risk of corrosion exists! 6 Valid from

17 Accessories for gratings Material Group NR To comply with workplace regulations, gratings must be secured against being removed and displacement. Each individual grating must be fastened to the substructure at a minimum of four places. The fixings shown below are suitable for foot trafficable gratings. Galvanised retaining clamp Description with clip and bolt. To secure gratings; protection against displacement and removal.... for mesh size 30/0, bolt length 60 mm 0, ,... for mesh size 30/0, bolt length 80 mm 0, ,... for mesh size /, bolt length 80 mm 0, ,00 for mesh size 30/0 Galvanised retaining clamp Description Suitable for grating securement; protection against displacement and removal. Only suitable for mesh size 0. Bolt length 60 mm, grating height to 30 mm 0, ,0 Bolt length 80 mm, grating height to 40 mm 0, , for mesh size 0 Loose saddle clip 0, ,60 Stainless steel retaining clamp Description with clip and bolt. To secure gratings; protection against for mesh size 30/0 displacement and removal... for mesh size 30/0 0, ,30... for mesh size 0 0, , for mesh size 0 Securing chain Description Securing chain with bracket mm; pair; for the securement of light well gratings 0, ,80 Valid from

18 Material Group NR Accessories for gratings Galvanised double retaining clamp Description with round-top plate and bolts. To join 2 gratings; protection against displacement and removal. Only for mesh size 0. Bolt length 60 mm (grating height to 30 mm). 0, ,90 Galvanised retaining clamp Description with round-top plate and bolt. Suitable for grating securement. Protection against displacement and removal. Only suitable for mesh size 0. Bolt length 60 mm (grating height to 30 mm) 0, ,00 Bolt length 80 mm (grating height to 40 mm) 0, , Bolt length 00 mm (grating height to 60 mm) 0, ,30 Fixings for welded pressure-locked gratings SP * Not a stock item, please ask us with regard to delivery time. Wing clip* Grating fastening, self-piercing bolt* Grating fastening, hook-shaped* Round-top plate with bolt* MEA mounting kits for MEAstep XSL and MEAstep XXL Description Kit : x bolt M2 x mm, 2x washers M2, x toothed lock washer M2, x nut M , ,60 Strength class 8.8 Easy-turn thread Specially coated for maximum corrosion protection Supplied in a heat-sealed plastic bag Kit 2: x bolt M2 x mm, 2x washers M2 x toothed lock washer M2, x nut M ,00 7,00 40,00 60,00 8 Valid from

19 Special gratings Material Group SR The MEA Metal Applications costing process: The prices for special gratings will be based on the following factors: The total surface area that is required to fabricate the desired shape, plus the price for straight or round cuts. Gratings below 0.7 m2 and cuts are subject to surcharges Toe plates, hinges, frames, substructures, locks, grating securing devices etc. can be attached at a surcharge Diagonal cuts Circular cutouts in segments (installation dependent) Right-angled cutouts, round cutouts, diagonal cuts Round grating Please supply MEA Metal Applications with the following information for your desired grating: Surface finish type Mesh size Thickness and height of the supporting bar Type of load (for foot or vehicular traffic; please specify the wheel load for a drive-over grating) Outer dimensions of grating or frame Direction of supporting bar (from support to support) Attachments (as per drawing or sketch) Grating fasteners (with or without) Valid from

20 Material Group SR Special gratings Full-immersion galvanised special gratings in various shapes, also with cut-outs and slip resistant. Load capacities as per MEA load tables. Mesh gratings 0 Mesh pitch and centreto-centre dimension 0 (33/33) Grating surround Frame Supporting bar /m 2-5 pces. /m 2 6- pces. /m 2 l/w/t /m /2 mm ) 3,327 7, 64,80 U Profil* 23/, /2 mm ) 5,400 78,40 7, U Profil* 28/,344 mm ) 7,993 83, 75,60 U Profil* 33/,474 /2 mm ) 2,69 93,80 85, Flat /2 38/,603 40/2 mm ) 23,77 00,80 9,60 U Profil* 43/,732 /2 mm ) 29,4,40 4,00 Flat /2 53/40/3 2,249 /3 mm ) 23,6 94, 85,60 Flat /3 28/,344 mm ) 27,58 97,40 88,60 Flat 33/,474 /3 mm ) 32,6,80 0,60 Flat /3 38/,603 40/3 mm ),332, 3,80 Flat 40/3 43/,732 45/3 mm ) 39,890 40,80 28,00 Flat 45/3 /,86 /3 mm ) 43,928 62,40 47,60 Flat /3 53/40/3 2,249 60/3 mm ) 5,742 9,80 74,40 Flat 60/3 63/40/3 2,8 /3 mm 2) 59,556 8, 89, Flat /3 73/40/3 2,766 80/3 mm ) 67,9 237,60 26,00 Flat 80/3 85//4 4,404 30/4 mm ) 39,802 38,60 26,00 Flat 30/4 33/,474 /4 mm ) 45,005 63,40,60 Flat /4 38/,603 40/4 mm 2),9 7,80 56, Flat 40/4 43/,732 45/4 mm ) 55,24 93, 75,60 Flat 45/4 /,86 /4 mm 2) 60,67 98,00 80,00 Flat /4 53/40/3 2,249 60/4 mm ) 7, ,80 28,00 Flat 60/4 63/40/3 2,8 /4 mm 2) 8, ,80 5, Flat /4 73/40/3 2,766 80/4 mm 2) 97,263 36,80 288,00 Flat 80/4 85//4 4,404 00/4 mm 2) 6,95 49,80 38,60 Flat 00/4 05/40/4 5,092 30/5 mm 2) 5,098 80,80 64,40 Flat 30/5 33/,474 40/5 mm 2) 65,0,00 28, Flat 40/5 43/,732 /5 mm 2) 78,64 292,60 266,00 Flat /5 53/40/3 2,249 60/5 mm 2) 9, ,40 339,40 Flat 60/5 63/40/3 2,8 /5 mm 2) 04,3 39, 5,60 Flat /5 73/40/3 2,766 80/5 mm 2) 2,9 409,00 37,80 Flat 80/5 85//4 4,404 90/5 mm 2),054 0, 436,60 Flat 90/5 95//4 4,7 00/5 mm 2) 42, ,40 478,60 Flat 00/5 05//4 5,092 /5 mm 2) 63, , 552,00 Flat /5 //4 5,780 ) Supporting bars and filler bars optionally available in a slip-resistant design 2) Filler bar optionally available in a slip-resistant design *Surround also optionally available as flat steel Other mesh sizes on request /linear m 4,40 5,00 5,40 7,00 8,00 22,00 5,00 5,40 7,00 8,00,00 22,00 22,,60 39,80 5,40 7,00 8,00,00 22,00 22,,60 39,80 47,80 5,40 8,00 22,00 22,,60 39,80 44,00 47,80 54, Valid from

21 Special gratings Material Group SR Full-immersion galvanised special gratings in various shapes, also with cut-outs and slip resistant. Load capacities as per MEA load tables. Mesh gratings 30/0 Mesh pitch and centreto-centre dimension 30/0 (33/2) Grating surround Frame Supporting bar /m 2-5 pces. /m 2 6- pces. /m 2 l/w/t /m /linear m /2 mm 8,439 99,40 90,40 U Profil* 23/, 4,40 /2 mm,53 07,40 97,60 U Profil* 28/,344 5,00 mm 23,46 2,60 02,40 U Profil* 33/,474 5,40 /2 mm 26,244 27,00 5,40 Flat /2 38/,603 7,00 40/2 mm 28,376 36,40 24,00 U Profil* 43/,732 8,00 /2 mm 34,545 55,80 4,60 Flat /2 53/40/3 2,249 22,00 /3 mm 3,80,00 22,80 Flat /3 28/,344 5,00 mm,892 43,60 30,60 Flat 33/,474 5,40 /3 mm 40,58 66,60 5,40 Flat /3 38/,603 7,00 40/3 mm 43,6 72,40 56,80 Flat 40/3 43/,732 8,00 45/3 mm,39 94,00 76,40 Flat 45/3 /,86,00 /3 mm 52,302 99,40 8, Flat /3 53/40/3 2,249 22,00 60/3 mm 60,6 223,60 3, Flat 60/3 63/40/3 2,8 22, /3 mm 67, ,40 222, Flat /3 73/40/3 2,766,60 80/3 mm 75, , 2,00 Flat 80/3 85//4 4,404 39,80 Füllstab in rutschhemmender Ausführung möglich *Surround also optionally available as flat steel Other mesh sizes on request Mesh gratings / Mesh pitch and centreto-centre dimension / Grating surround Frame Supporting bar /m 2-5 pces. /m 2 6- pces. /m 2 l/w/t /m /linear m /2 mm 2,734 0,40 00,40 U Profil* 23/, 4,40 /2 mm,09 2,60 0,60 U Profil* 28/,344 5,00 mm 29,288 29,60 7,80 U Profil* 33/,474 5,40 /2 mm 34,23 55,60 4,40 Flat /2 38/,603 7,00 40/2 mm 37,680 65,40,40 U Profil* 43/,732 8,00 /2 mm 47,573 6,00 87, Flat /2 53/40/3 2,249 22,00 /3 mm 38,330 46,00 32,80 Flat /3 28/,344 5,00 mm 44,605 5,00 37, Flat 33/,474 5,40 /3 mm 52,36 90,40 73,00 Flat /3 38/,603 7,00 40/3 mm 57,56 93,80 76, Flat 40/3 43/,732 8,00 45/3 mm 64,467 23,80 94,40 Flat 45/3 /,86,00 /3 mm,963 2, 229, Flat /3 53/40/3 2,249 22,00 60/3 mm 83,54 297,, Flat 60/3 63/40/3 2,8 22, /3 mm 96, ,00 293,60 Flat /3 73/40/3 2,766,60 80/3 mm 08,92 369,60 336,00 Flat 80/3 85//4 4,404 39,80 Füllstab in rutschhemmender Ausführung möglich *Surround also optionally available as flat steel Other mesh sizes on request Valid from

22 Material Group SR Special gratings Full-immersion galvanised special gratings in various shapes, also with cut-outs and slip resistant. Load capacities as per MEA load tables. Expanded metal gratings Mesh pitch and centreto-centre dimension 0/ Grating surround Frame Total height /m 2-5 pces. /m 2 6- pces. /m 2 l/w/t /m 2 /linear m mm, 42,60 29,60 U-Profil 28/,344 5,00 Surcharge for special sizes under 0.7m 2 Surcharge for cuts Surface area 0-0,5 m 2 Factor 0,5 m 2 - Price x, Supporting bar height Supporting bar thickness Straight cuts /linear m Round cuts /linear m Minimum charge 0,6-0, m 2 0,26-0, m 2 0,36-0, m 2 - Price x,30 - Price x, - Price x,5-40 mm mm 2-3 mm 4-5 mm 24,00 32,00 36,00 44, linear m/cut 0.5 linear m/cut 0,5 - <0, m 2 - Price x,0 Minimum grating price /piece Material Group ST MEAstep XSL stair treads and landings the new standard for treads MEAstep XSL combines lightness with safety and strength.an extremely attractive appearance has been achieved through a re-designed load-bearing structure. Filler bar at right angles to the direction of travel even for mesh size 30/0. MEAstep XSL: special sizes possible, in addition to stock items. Patent No. EP Valid from

23 Functional V2A stainless steel gratings.430 pickled or electropolished Fabrication range Mesh sizes: 30/0, 22/22, 22/30, 22/44, 22/88, 2, 0, 30/60, 44/22, 44/30, 44/44, 60/0, 60/22, 60/30 Supporting bars: Height 40 mm, thickness mm Surround: Flat-steel surround, also optionally available without surround Terms and conditions: Prices on request Delivery time approx. 3-4 weeks Delivery conditions by agreement Valid from

24 Your partner for MEA products MEA Metal Applications GmbH Sudetenstrasse D-8655 Aichach E 09.5