ECONOMY FINGER JOINT BIT. Model:601 SERIES FEATURES: Specification: Item No. A B C D /8 1-1/2 1/2 1-1/2 FINGER JOINT BITS.
|
|
- Sharleen Daniel
- 5 years ago
- Views:
Transcription
1 ECONOMY FINGER JOINT BIT Model:601 SERIES Make professional finger joints with this bit. This bit can be used for jointing wood edge to edge or end to end. The actual joint produced with this bit is stronger than the wood itself. Bearing 3/ /8 1-1/2 1/2 1-1/2 FINGER JOINT BITS Model:602 SERIES Make professional finger joints with this bit. This bit can be used for jointing wood edge to edge or end to end.
2 /2 15/16 1/2 1-3/4 ADJUSTABLE FINGER JOINT ASSEMBLY Model:602 SERIES Cut from 1-5 fingers in one pass or more in multiple passes. 5 finger cutters, 1 bottom cutter, ball bearing guide, shims, spacers & washers, mounted on 1/2" shank arbor. Item No. CUTTING LENGTH SHANK SHANK LENGTH BEARING /64 1/2 1-1/2 28mm Item No. Sequence No. Item Speification Q ty ARBOR WITH NUT SHANK SIZE AS REQUIREMENT SPINDLE OD 8mm BALL BEARING 28mm OD x 8mm ID x 9mm T FINGER SLOT-CUTTER ABUTTING-EDGECUTTER mm SPACER 40mm OD. 8mm BORE mm KERF 39.6mm OD. 8mm BORE mm KERF 16mm OD x 8mm ID x 3.4 mm T 5 1 7
3 mm SHIM mm SHIM mm SPACER 12.5mm OD x 8mm ID x 0.10 mm T 12.5mm OD x 8mm ID x 0.05 mm T 16mm OD x 8mm ID x 1.50 mm T LOCK MITRE BITS Model:603 SERIES Lock miter gives strong mechanical joint and increased gluing surface. Set cutter height in router table so that inter-lock is centered to your stock /2 1/2 1/4 1-1/ /4 3/4 1/2 1-1/ /4 1-1/16 1/2 1-3/ /2 1-1/2 1/2 2 GLUE JOINT BIT SET Model:604 SERIES
4 These bits are perfect for gluing up boards for wide projects. will provide a strong joint due to the increased glue area. E M /2 1-1/8 1/2 1-1/2 5/16 1/ /2 1-1/8 1/2 1-1/2 5/16 1/4 DRAWER LOCK BITS Model:605 SERIES Run drawer fronts flat on router table and the sides vertically against your fence to produce locking joints.
5 /16 3/4 1/4 1-1/ /16 3/4 1/2 1-1/2 TONGUE & GROOVE BITS (STRAIGHT) Model:606 SERIES Stronger than dowels and biscuits. Use these bits for edge-joining panels, table tops or any other glue-up project /16 1 1/4 1-1/ /8 1 1/2 2 TONGUE & GROOVE BITS (WEDGE) Model:607 SERIES Stronger than dowels and biscuits. Use these bits for edge-joining panels, table tops or any other glue-up project.
6 /16 1 1/4 1-1/ /8 11 1/2 2 TONGUE & GROOVE BITS (WEDGE) Model:608 SERIES Stronger than dowels and biscuits. Use these bits for edge-joining panels, table tops or any other glue-up project /2 1-3/16 1/2 1-1/2 TONGUE & GROOVE BITS (WEDGE) Model:608 SERIES
7 Stronger than dowels and biscuits. Use these bits for edge-joining panels, table tops or any other glue-up project /2 1-3/16 1/2 1-1/2 ECONOMY TONGUE & GROOVE ASSEMBLY Model:609 SERIES Oversized cutters cut both the tonque and groove for 3/4" stock cleanly. No need for a fence! Ball bearing guides let you follow the material. Bearing 22mm /8 1/4 1/4 1-1/ /8 1/4 1/2 1-1/2 REVERSIBLE GLUE JOINT ASSEMBLY
8 Model:610 SERIES This single cutter set makes the grooved edge. Simply replace the middle cutter ("B") with the bushing supplied to make the tongue edge. Great for select grade cabinet lining materials, panelling, etc. Suitable for 1/2" to 3/4" timber. Supplied in 1/2" shank. Cutters are 3-wing with 2mm thick tungsten tips. E /32 3/4 1/2 1-1/2 3/16 "V" TONGUE & GROOVE SET Model:611 SERIES Attractive "V" paneling created with this router bit set gives you a perfect match every time. Set comes complete with spacers allowing you to produce "v" paneling. *Bearing 5/8" /2 1-1/ /8 1 1/2 1-1/2
9 DRAWER LOCK BITS Model:612 SERIES This bit will form a strong joint between the sides and front of a drawer. Drawer fronts are formed horizontally, flat on table surface. Drawer sides are formed vertically against the fence of the table. E F /2 1/4 1-1/4 5/32 3/ /2 1/2 1-1/2 5/32 3/ /2 1/2 1-1/2 5/32 1-3/4 ADJUSTABLE FINGER JOINT ASSEMBLY Model: Cut from 1-5 fingers in one pass or more in multiple passes. 5 finger cutters, 1 bottom cutter, ball bearing guide, shims, spacers & washers, mounted on 1/2" shank arbor.
10 Item No. A B C D E M Bearing /8 1-3/8 1/2 1-1/2 1/2 3/8 1/4 5/32 7/8 1-1/8 1-3/8 Item No. Item Specification Q ty Arbor with nut Shank size as requirement spindle OD 8mm Ball bearing 22mm OD x 8mm ID x 7mm T Ball bearing 28.5mm OD x 8mm ID x 7mm T Ball bearing 34.92mm OD x 8mm ID x 7mm T Finger slot-cutter 47.6mm OD x 8mm Bore 4mm KERF mm spacer 16mm OD x 8mm ID x 5.1mmT mm shim 12.5mm OD x 8mm ID x 0.05mmT mm spacer 16mm OD x 8mm ID x 1.0mmT 2 GLUE JOINT BIT SET Model:604 SERIES
11 These bits are perfect for gluing up boards for wide projects. will provide a strong joint due to the increased glue area. E M Bearing /4 1-1/4 1/2 1-1/2 5/16 1/4 5/ /4 1-1/4 1/2 1-1/2 5/16 1/4 5/ /4 1-1/4 1/2 1-1/2 5/16 1/4 5/ /4 1-1/4 1/2 1-1/2 5/16 1/4 5/8 RAISED PANEL V JOINT BITS Model:613 SERIES
12 This bit will produce a strong joint for edge gluing boards for raised panels. It will not leave the dark lines like standard finger joint bits because all of it is joing surfaces are at an angle and not vertical. E M R /8 1-37/64 1/2 1-1/2 5/32 3/16 80 WAVY JOINT BITS Model:614 SERIES Waves formed in material accommodate more surface glue, creating a solid joint. Specially formulated carbide is ideal for fabricating solid surface materials. E M /8 1-13/16 1/2 1-1/2 37/64 1/8 GLAZING BAR OVOLO JOINT SET Model:651 SERIES
13 This pair of cutters can be used to make rule joints or glazing bar joints. R A 1-3/16 5/8 1/4 1-1/4 3/ B 1-3/16 3/8 1/4 1-1/4 3/8
ROUTER BITS. Rabbeting Bits. Rabbeting Bits with Bearing Set Comes with interchangeable bearings to cut rabbets of different depths.
32-098 ROUTER BITS 42 32-504 Rabbeting Bits Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards and for letting in back panels. Steel pilots can be removed from bits
More informationnew Saw blades Flooring router bits B - 024B Lock miter set 8/955 Tools with bore & Knives Router Bits & Sets
Flooring router bits new aw blades 822.023B - 024B CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They can easily and smoothly run through solid
More informationEdge Treatment & Grooving Bits
Multi-Profile Bits Thick carbide tips and a sturdy 1 2 shank allow you to produce countless moulding profiles. Produce an endless number of profile designs by varying the height and fence settings and
More information86N80.10 Economy Dovetail Jig
86N80.10 Economy Dovetail Jig IMPORTANT: Before using your dovetail jig, it should be securely fastened to a workbench. For a temporary setup, attach the jig to a piece of ¾ thick plywood or MDF long and
More informationDESCRIPTION. Display cabinets with: 240 HW router bits (S=Ø8mm), 60 spare parts (saw blades at your choice)
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
More informationRouter Bits. Router Bits. WoodPecker. Router Bits. Router Bits. Straight Bits 1/4 Shank, 2 Flutes. Rail & Stile - Raised Panel Door Set, 3 Pcs
Rail & Stile - Raised Panel oor Set, 3 Pcs Premium industrial quality, suitable for working in natural woods and man made materials (MF). Unique cutting angles and chip limiter body ensures safe, clean
More informationDisplay cabinets. Saw blades. & Knives. Tools with bore. Router Bits & Sets. CNC Router Cutter & Chucks. Industrial.
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
More informationORDERING INFORMATION Product numbers are simple to understand by following the Product Order Code interspersed through the catalog.
3 F reeborn Tool Company is proud to present its latest collection of high quality Carbide and T-Alloy tipped shaper cutters. We are confident that here you will find numerous solutions to your woodworking
More informationULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
More informationSlot Cutters. Slot Cutter Arbors. without arbor 822 CARBIDE TIPPED. the only ORANGE one. pag /1/99 1:22 PM Page 28
pag 28-47 4/1/99 1:22 PM Page 28 Slot Cutters without arbor 822 CARBE TPPE These three wing carbide tipped CMT Slot Cutters feature anti-kickback three wing blade design and CMT trademark orange Teflon
More informationProject 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
More informationSpokane Hardware Supply, Inc.
Decorative Hardware Hinges Router Bits Cabinet Organizers Furniture Components STRAIGHT BITS, CARBIDE TIPPED - SINGLE, PLUNGE CUT Optimum chip clearance. Specially designed tip for fast plunge cutting.
More informationRouter Bits. Router Bits. Router Bits. Router Bits. Dovetail Bit. Glue Joint Bit, 2 Flutes. 45º Lock Mitre Joint Bits, 2 Flutes. Butterfly Spline Bit
outer its ovetail it Tool no ia Shank a Length 1044-12 1/2" 1/4" 1/2" 14º 2 1/4" outer its Glue Joint it, 2 Flutes Tool no ia Shank a Length 1494-25 1" 1/4" 3/4" 14º 2 1/4" Template all earing -12 Lock
More informationALWAYS disconnect the power source before using the Betterley UNA-GAUGE with any power tool or machine!
Betterley UNA-GAUGE Thank you for purchasing the Betterley UNA-GAUGE. You will find the UNA-GAUGE provides quick adjustments and alignment of most tools and machinery with extreme accuracy. The versatile
More informationEntry & Interior Door Router Bit Set Instruction Manual
800.527.11 Entry & Interior Door Router Bit Set Instruction Manual C.M.T. UTENSILI S.p.A. Italy - Pesaro 61020 Chiusa di Ginestreto Via Della Meccanica Tel. +39 0721 48571 Fax +39 0721 481021 www.cmtutensili.com
More informationAdjustable Box Joint Jig. Richard Hicks on 8/24/2015. Box or Finger Joints
Adjustable Box Joint Jig Richard Hicks on 8/24/2015 Box or Finger Joints Adjustable Box Joint Jig Richard Hicks on 8/24/2015 Box Joints are also called Finger Joints Because they have interlocking fingers
More informationCopyright MLCS 1
Copyright 2007. MLCS 1 WORKING WITH BOX JOINTS Box joints (AKA "Finger Joints") provide a simple, yet equally effective, alternative to dovetail joinery. In particular, they serve well for applications
More informationORDERING INFORMATION Product numbers are simple to understand by following the Product Order Code interspersed through the catalog.
3 F reeborn Tool Company is proud to present its latest collection of high quality Carbide and T-Alloy tipped shaper cutters. We are confident that here you will find numerous solutions to your woodworking
More informationCarbide-Tipped Bowl & Tray Bits
Carbide-Tipped Bowl & Tray Bits SE / ShAnK Radius SE0 / / / -/ SE / / / -/ SE / / -/ SEB / / / -/ SBE0 bearing Radius SE / / / -/ SE -/ / / -/ SEB -/ / / -/ Bearing supplied on shank for template routing.
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationCopyright 2007 MLCS 1
Copyright 2007 MLCS 1 REFERENCE GUIDE and SPECIFICATIONS: Edge Guides: This 12 Dovetail Template comes complete with 2 Edge Guide Sets one set for Half Blind and one set for Rabbeted Half Blind Dovetails.
More informationCUTTER BLOCKS. Knives HSS & Carbide Tipped
C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on
More informationEssential BOX JOINT JIG
Essential BOX JOINT JIG Home in on precise finger joints with this table saw sled. By Ken Burton The box (or finger) joint is a remarkably strong, interlocking corner joint that can be quickly made on
More informationPopular Woodworking Magazine. Router Fence for a Table Saw. (1 of 7)02/09/
Router Fence for a Table Saw http://www.popularwoodworking.com/features/fea19.html (1 of 7)02/09/2005 11.15.18 Your table saw is a router table and jointer just waiting to happen. Replace one of the saw's
More informationPost & Rail Crossbuck
Post & Rail Crossbuck 1. Getting Started 6. Crossbuck Be sure to call underground prior to digging Assemble gates (if necessary) and decide where they will be located Stake out the fence line Space and
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationSpindle Tooling. Wobble Saw. RT Adjustable Grooving Rabbeting Cutterhead. 150 Spindle Tooling WOBBLE SAW AG00701
Spindle Tooling Wobble Saw WOBBLE SAW RT Adjustable Grooving Rabbeting Cutterhead AG00701 Titman s Wobble Saw is the traditional answer to the problem of cutting various widths of grooves in timber, chipboard
More informationSilverware Chest Plan
Silverware Chest Plan 05L14.01 Introduction 1. Measure the space required for your cutlery before beginning this project to be sure that it will fit in the drawers and top compartment. The best way to
More informationEDP# Model 26 MAINTENANCE INSTRUCTIONS AND PARTS LIST. Better By . :;]- ~, Iiii. McMINNVILLE, TENNESSEE D AC
EDP# 040 Model MAINTENANCE INSTRUCTIONS AND PARTS LIST Better By Design@). :;]- ~, Iiii McMINNVILLE, TENNESSEE 70 D AC 5-47-555 PARTS LIST: Stand & Table ITEM PART ITEM PART NO. NO. DESCRIPTION IOTY. NO.
More informationWoodline USA Woodline Spacer Fence System
Woodline USA Woodline Spacer Fence System MADE IN THE USA Includes: (1) ¼ Spacer Fence (1) 3/8 Spacer Fence (1) ½ Spacer Fence (1) Hardware Package (1) 3 Piece Brass bar set (2) Setup Blocks Visit Us Online
More information15 Dovetail Jig. Instruction Manual. Part # 3452
15 Dovetail Jig Instruction Manual Part # 3452 CAUTION: Please read, understand, and follow all manufacturers instructions, guidelines and owners manuals that come with your power tools. Peachtree Woodworking
More informationCHAPTER 8. Through Dovetail Procedures
CHAPTER Through Dovetail Procedures 52 Chapter D4 User Guide THROUGH DOVETAIL PROCEDURES Chapter Foreword In these instructions for using the Leigh Dovetail Jig, we have recommended using certain cutters
More informationStile & panel router bits 8/970
tile & panel router bits 8/970 These bits can be used for decorative work on solid wood panels and MF materials. Use them in one pass or in combination with CMT s MF panel bits for complex and intricate
More informationComplete Dovetail Jig Instructions
Complete Dovetail Jig Instructions 15 18 4 3 1 12 13 8 19 17 16 6 14 5 9 11 10 2 9 PARTS LIST - Complete Dovetail Jig Introduction Your new dovetail jig will cut Full Through Dovetails and three varieties
More informationMolding. The molder head (Figure 5-1) is a heavy steel disc that is mounted on the 5/8" molder/dado arbor, then onto the Mark V s main spindle.
Molding Molding operations are performed with the Mark V in the table saw mode. The molder head accessory enables you to add professional detail to almost any project. With it you can shape edges and surfaces,
More informationHalf-Blind Isoloc Joint Procedures
ISOLOC - CHAPTER 6 Half-Blind Isoloc Joint Procedures 6- Always use scrap boards to practice and test for fit. Rip the boards to width to suit the chosen template. The pin boards should not be less than
More informationRouter Table. In a recent article, I wrote about the router table I built for the Center. 5 Essential Jigs for the
5 Essential Jigs for the Router Table Great fixtures and fences offer better control and new possibilities BY PETER SCHLEBECKER In a recent article, I wrote about the router table I built for the Center
More informationCongratulations on your purchase of the Divided Light Door Set. This set will help you create beautiful cabinet doors with true divided light panels.
Divided Light Door Set User Instructions Congratulations on your purchase of the Divided Light Door Set. This set will help you create beautiful cabinet doors with true divided light panels. Following
More informationPROJECT PLAN TOOL CHEST
BUILD IT WITH ROCKLER PROJECT PLAN TOOL CHEST FEATURING ROCKLER S BUILD QUESTIONS? Go to www.rockler.com or call 800-279-4441 Stock # Item 63420 1/4" x 24" x 30" Baltic Birch Plywood 63446 1/2" x 24" x
More informationButt Two pieces of wood meeting with flat sides adjoining usually at right angles. Some type of connector is needed to prevent movement.
Wood Connections There are basically five different types of connectors: Interlocking (carpentry joints), Dowel, Metal Connectors, Special Formed Connectors and Adhesives. I Interlocking (Carpentry Joints)
More informationUser Manual. CMT650 Kitchen Worktop Jig CMT Part no:
User Manual CMT650 Kitchen Worktop Jig www.cmtuk.com Part no:200650 www.axminster.co.uk CMT650 Index of Contents... Page No. Index of Contents...02 What s in the Box.........03 What else you will need...
More informationHinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74
Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it
More informationTools for the toughest demands. Overview of router bits. A handy guide
Tools for the toughest demands Overview of router bits A handy guide Festool router bit selection This guide provides information on the extensive selection of Festool router bits. You will find bits for
More informationMODEL H-9 HEAVY DUTY BENCH-TYPE UNDERCUTTER INSTRUCTIONS
MODEL H-9 HEAVY DUTY BENCH-TYPE UNDERCUTTER INSTRUCTIONS CAPACITY: Between centers - 32" long x 12" diameter. Between roller V- supports - 35" long x 17" diameter. Maximum armature weight - 200 lbs. SAW
More informationSECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
More informationCMT Enlock Jig Owner s Manual
Thank you for purchasing the CMT Enlock Jig. This jig will simplify joinery in your shop, and on the job site. Please read the instructions thoroughly before using the Enlock Jig. Router requirements A
More informationWelcome to the 2016/2017 catalogue
Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our new catalogue and choose from a wider range of innovative and state-of-the-art
More informationRouter Table-Mate. Everything you'd want in a router table for just $50.
Router Table-Mate Everything you'd want in a router table for just $50. Commercially made router tables are everywhere these days. Some of them come with more gizmos and gadgets than a 59 Edsel. By the
More informationRouter bit cabinet August Home Publishing Co.
Router bit cabinet 2011 ugust Home Publishing Co. Feature Project Router Bit Cabinet Dovetail keys at the corners reinforce the joints to make a stronger cabinet. Plus, a clear, plastic door panel lets
More informationTraditional Undermount: S Method (Undermount):
TOOLS REQUIRED 15.1 TOOLS REQUIRED The installation of Corian shape product must be a precise and exacting process to ensure that a good fit is always created. Using the correct tools is essential. In
More informationUser Guide: Setting Up and Using Rail & Stile Sets
User Guide: Setting Up and Using Rail & Stile Sets Table of Contents Important Safety Information... 3 Prepare the Project Wood and Size Work Pieces... 4 Make Test Cuts and Setup Blocks before Cutting
More informationMachine Cut Through Dovetails
Machine Cut Through Dovetails The dovetail is a classic joint that many craftsmen consider to be the hallmark of quality joinery. But the traditional method of cutting dovetails by hand requires skill
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More informationREINFORCING THE CORNERS OF FLAT FRAMES
REINFORCING THE CORNERS OF FLAT FRAMES There are a number of different methods that may be used to join flat frame sides together. As most Woodworkers know, end grain glue joints are not nearly as strong
More informationModel W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
More informationSpecial Joints FMT PRO CHAPTER 7. m IMPORTANT SAFETY NOTE. Angled Joints Through Tenons Bridle Joints Asymmetric Tenons Haunched Joints Doweling
MORTISE & TENON ROUTING PROCEDURES47 FMT PRO CHPTER 7 Special Joints ngled Joints Through Tenons ridle Joints symmetric Tenons Haunched Joints Doweling efore using your Leigh FMT Pro you must have completed
More informationWhile one of the most
Plans NOW www.plansnow.com TOOLS & TECHNIQUES SERIES While one of the most useful tools for cutting joints is a dado blade, selecting which type to buy can be a little bit confusing. To simplify it, all
More informationParts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli
EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original
More informationWHITESIDE MACHINE. Carbide Tipped. Router Bits. Drills. Hole Saws HOLE SAWS. More! MADE IN THE USA CT STRAIGHTS SOLID CARBIDES SPIRALS
WHITESIDE MACHINE Router Bits Carbide Tipped Drills CT STRAIGHTS SOLID CARBIDES SPIRALS FORM BITS THREE WING DRILLS Hole Saws HOLE SAWS MADE IN THE USA & More! ESTABLISHED IN 1970 CATALOG #48 About the
More informationMiter Saw Super Stand
Quality Power Tool Accessories OWNER S MANUAL Miter Saw Super Stand Models 2875/2875XL IMPORTANT Read and understand all safety guidelines and instructions carefully before operating. GENERAL INFORMATION
More informationBUILDING A STORM DOOR
BUILDING A STORM DOOR BY NEAL BARRETT Illustrations by George Retseck If you're in the market for a storm door, you probably know that there are many styles and models available. However, most of them
More informationCarcase Construction. Choosing and making the right joints. by Tage Frid
Carcase Construction Choosing and making the right joints by Tage Frid Furniture construction is broken down into two main categories: frame and carcase. In frame construction, relatively narrow boards
More informationPost & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS
Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More informationFitting Guide. Measuring your walls
Fitting Guide Measuring your walls Once you have decided where you are fitting your panels you need measure the width and the height of each wall you are fitting onto. Our panels can be laid vertically
More informationWhile creating a two-wall
Ready-To-Assemble Cabinets Outfit your shop in a weekend or less. By Gary Lombard with Jim Harrold 32 woodcraftmagazine.com Aug/Sept 2013 While creating a two-wall or larger shop (or a kitchen, for that
More informationCopyright 1998 KDE Technologies
Modular Computer Corner Desk Unit Copyright 1998 KDE Technologies http://members.tripod.com/~kdetech/ 1. Introduction 2. Plans Sheet one - Isometric Sheet two - Top Detail / Corner Unit Sheet three - Leg
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationTongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com
Tongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com A tongue and groove cabinet door is made up of at least 5 pieces. Two horizontal rails (blue), two vertical styles (green), and one
More informationWARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: ,
WARNING: Read these instructions before using the machine DOVETAIL JIG MODEL NO: CDTJ12 / CDTJ24 PART NO: 6462170, 6462175 OPERATION & MAINTENANCE INSTRUCTIONS LS0111 INTRODUCTION Thank you for purchasing
More informationThe WoodWorker s Edge
The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to
More informationTechnical Manual. Tenth Edition, Copyright Compiled by: The Woodworking Technical staff at MLCS Ltd.
Technical Manual Tenth Edition, Copyright 2009 Compiled by: The Woodworking Technical staff at MLCS Ltd. Toll Free/24 hr Ordering 1-800-533-9298 Local Number/Showroom 1-215-938-5060 Fax 1-215-938-5070
More informationVariable joint spacers (VJS)
Variable joint spacers (VJS) Instructions for the variable joint spacer (VJS) Gifkins Dovetail has a system that makes it possible to cut variable sized dovetails on a fixed template! With variable joint
More informationExtendable Large Dovetail Jig
Extendable Large Dovetail Jig Instruction Manual Part # 3458 CAUTION: Please read, understand, and follow all manufacturers instructions, guidelines and owners manuals that come with your power tools.
More informationDesign Update /29/2006
Design Update 3 -- 8/29/2006 Since our first design we ve made many minor changes to key areas of the prayer bench, especially the folding hinge geometry. The general design remains the same, though the
More informationFrom the Original Woodworker s Notebook
From the Original Woodworker s Notebook By Ronald Woodhull VERTICAL MITER FIXTURE A NOTE ON SAFETY Safety is the responsibility of all woodworkers. Do not attempt any project or procedure without all safety
More informationorder online at
F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved
More informationPlease read this owner s manual before use and keep it at hand for reference.
From the makers of INCRA JIG! Split fence design Micro adjustable Universal dust collection port Adjustable fence gap Compatible with all INCRA joint-making accessories CONTENTS CONTENTS Assembly........................
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationCONTINUOUS SAMPLING SYSTEMS
For over 0 years, Mobile s OVERSHOT WIRELINE CONTINUOUS SAMPLING SYSTEM has been recognized as the leading method for obtaining continuous samples while drilling in cohesive soils - fast, effective, hollow
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM MATERIALS AND MANUFACTURING IV
UNIT: Safety NO. OF DAYS: 20 KEY LEARNING(S): Safe and proper use of tools and machines UNIT : How do I safely work in materials and manufacturing lab & How to apply machines and tools? 3.4.10. D2. Diagnose
More informationPivot-Door Downdraft Cabinet Plans
Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router
More informationWays to get the most out of your
5 Ways to get the most out of your router table When you mount a router on a table, you expand your shop s potential. To help you take advantage of this potential, we assembled five router table techniques
More informationBASE, COLUMN, ARM AND TABLE
SPARE S LIST Item No. 700000 Article No. 84-2265 IMPORTANT INSTRUCTIONS It is most important that the above illustration be studied prior to the assembly of the saw blade and arbor or the assembly of the
More informationNext-Generation Router Table
Next-Generation Router Table Make more accurate cuts with a flat, solid-surface top. by John English 2 AmericanWoodworker.com 9 Key Features 1. Hinged Top. Bit changes are much easier. 2. Pivot Control.
More informationDrill Press Storage Cart
Drill Press Storage Cart Richard Hicks on July 22, 2013 Drill Press Storage Cart Drill Press Storage Cart My Inspiration ShopNotes Issue 128 Changes Used casters instead of wheels Didn t build the drill
More informationSPUNKY ASSEMBLY MANUAL
SPUNKY ASSEMBLY MANUAL Please read the tips section at the back of this manual regarding the use of laser cut parts. The proper removal and preparation of these parts is important. When laser cut, some
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationCopyright WilkerDos.com Dining Table. Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.
Copyright WilkerDos.com 2017 Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.com) Layout & Shopping List Page 2 of 12 Layout & Shopping List Item Quantity Description
More informationBRACKET FIX SYSTEM FITTING INSTRUCTIONS
Whether building a new staircase or replacing old banisters, the patented Bracket Fix stair balustrading system will enable you to complete the work quickly and easily. The Richard Burbidge patented Bracket
More informationManual feed. Leitz Lexicon Edition 7
Manual feed Leitz Lexicon Edition 7 Explanation of abbreviations A a e a p APL APT AL AM AS b B B BEM BEZ BH CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel raising
More informationGreene & Greene. Mailbox. by Seth Keller. Signature details create an elegant box. 2 AmericanWoodworker.com
Greene & Greene Mailbox by Seth Keller Signature details create an elegant box. 2 AmericanWoodworker.com We needed a new mailbox, but I couldn t find an off-the-shelf version that I liked. So I decided
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationHardware Cabinet. Part 3
Hardware Cabinet Part 3 The vertical dividers are the next task on the cabinet and a bit of a trick to get right. The horizontal dividers are only ½ thick pine spanning the 31 width of the cabinet and
More informationFramework joints FABRICATION - WOOD JOINTS. Corner joints. Tee joints. Worksheet 15a. Cable Educational Ltd
FABRICATION - WOOD JOINTS The word: fabricate means to join together. Most wooden products are held together with adhesive. Adhesive works very well when the edge of a piece of wood is being glued to the
More informationFabrication Manual 01/2012
10.1. TYPES OF FRAMES DuPont Corian must be supported on a strong perimeter frame that will keep it level for the useful life of the top. Varying lay-outs and overhangs place different challenges on our
More informationPRACTICAL TASK MANUAL
6706-28 Level 2 Diploma in Wood Machining for Joinery Manufacture PRACTICAL TASK MANUAL July 2014 Version 1.0 Contents Candidate details 2 Unit assessment overview 3 Practical task completion record 3
More informationTimberflex & Flexboard Technical Guide
Timberflex & Flexboard Technical Guide A bendable substrate material that can be formed first and laminated last Patent #5,618,601; #5,232,762; #5,824,382 Doors Larger radius and small doors are easily
More informationSPECIALTY MOULDING BITS. Model:351 SERIES FEATURES: Two flutes, 1/4" & 1/2" shank. Give your furniture and cabinets a special look with this molding
SPECIALTY MOULDING BITS Model:351 SERIES Two flutes, 1/4" & 1/2" shank Give your furniture and cabinets a special look with this molding bits. These give your door casings, trim, baseboards, and pilasters
More informationCROTCH-GRAINED CHESS TABLE. Walnut, Poplar
3 CROTCH-GRAINED CHESS TABLE Walnut, Poplar 11 MAKING THE CHESS TABLE This piece is designed around a set of angles taken from the playing pieces, angles echoed in the fat dovetails holding the stretchers
More information