PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
|
|
- Marilyn Miles
- 5 years ago
- Views:
Transcription
1 PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL (800) info@lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800) info@lorchem.com Page 1
2 Quick Couplers Brass Couplers, designed for 4000 PSI and extended durability. Affordable and rugged all in one. Case Lot Part No /4" FPT Case of 200 Couplers /8" FPT Case of 200 Couplers /2" FPT /4" MPT Case of 200 Couplers /8" MPT Case of 200 Couplers /2" MPT Precision brass design Stainless-steel band for increased durability (except 1/2") Unrestricted free-flow 4000 PSI max Case Lot Part No Description Case of 200 Couplers, 1/4" FPT Case of 200 Couplers, 3/8" FPT Case of 200 Couplers, 1/4" MPT Case of 200 Couplers, 3/8" MPT Steel Nipples, hardened steel combined with zinc yellow chromate plating holds up to the harshest environments. Case Lot Part No /4" FPT Case of 200 Nipples /4" x 1/8" FPT Zinc-plated Hardened steel 4000 PSI max /8" FPT Case of 200 Nipples /2" FPT /4" MPT Case of 200 Nipples /8" MPT Case of 200 Nipples /2" MPT Case Lot Case of 200 Nipples, 1/4" FPT Case of 200 Nipples, 3/8" FPT Case of 200 Nipples, 1/4" MPT Case of 200 Nipples, 3/8" MPT Stainless-Steel Quick Couplers SS 1/4" MPT Stainless-steel Couplers SS 3/8" MPT Stainless-steel Couplers /4" MPT Stainless-steel Nipples /8" MPT Stainless-steel Nipples SS 1/4" FPT Stainless-steel Couplers Chemical-resistant 303 stainless-steel 6000 PSI SS 3/8" FPT Stainless-steel Couplers /4" FPT Stainless-steel Nipples /8" FPT Stainless-steel Nipples O-Rings O-Rings for AP, Hansen, Foster, Parker, and other quick-coupler brands. Buna to 210 F, EPDM to 280 F and Viton to 300 F and aggressive chemicals. QC EPDM Part No Old No QC Size /8" /4" /8" QC Buna Part No Old No QC Size /4" /8" /2" QC Viton Part No Old No QC Size /4" /8" /2" 147
3 Quick Connective Couplers - Foster Precision performance Unrestricted bore for free flow Resists plug deformation when pressure spikes occur and withstands pump pulse Quick Couplers - 11,000 PSI Snaptite Quick Sockets and Plugs are precision-built for extreme high pressure. 11,000 PSI max -40 F to 250 F Zinc chromate Coupler, 1/4" Socket, Male, Brass Coupler, 1/4" Socket, Female, Brass Coupler, 3/8" Socket, Male, Brass Coupler, 3/8" Socket, Female, Brass Coupler, 1/2" Socket, Female, Brass Coupler, 1/4" Plug, Male, Steel Coupler, 1/4" Plug, Female, Steel Coupler, 3/8" Plug, Male, Steel Coupler, 3/8" Plug, Female, Steel Coupler, 3/8" Plug, Male, S/S Coupler, 3/8" Plug, Female, S/S Coupler, 1/2" Plug, Male, Steel Coupler, 1/2" Plug, Female, Steel /4" FPT Socket /4" MPT Socket /8" FPT Socket /4" FPT Plug /4" MPT Plug /8" FPT Plug /8" MPT Plug /4" SEAL, U-Pack /8" SEAL, U-Pack Couplers - Quick Connective Pressure Rating Service Steel Plug Brass Plug Stainless-steel Series PSI PSI PSI 1/8" /4" /8" /2" /4" /8" MPT Brass Coupler Socket /4" MPT Brass Coupler Socket /4" FPT Brass Coupler Socket /8" Stainless-Steel MPT Coupler Socket /4" Stainless-Steel FPT Coupler Socket /8" Stainless-Steel FPT Coupler Socket /2" Stainless-Steel FPT Coupler Socket /8" MPT Plugs, Steel, Zinc-plated /8" FPT Plugs, Steel, Zinc-plated /4" MPT Plugs, Steel, Zinc-plated /4" FPT Plugs, Steel, Zinc-plated /4" MPT Plugs, Hardened Stainless-Steel /4" FPT Plugs, Hardened Stainless-Steel /2" MPT Plugs, Hardened Stainless-Steel /2" FPT Plugs, Hardened Stainless-Steel Twist Seal Couplers Allows U.S.-standard hose to connect to Eu ro pe an (22mm) fittings. Internal O-ring seal Machined-brass body High-impact plastic knob 7.8 GPM max flow (Not threaded) 3600 PSI max pressure 302 F max temperature Not threaded /4" FPT /8" FPT /4" MPT /8" MPT /8" QD Plug /8" QD Plug Plugs are made of heavy-duty machined-brass for a safe and leak-free connection /4" FPT /8" FPT /4" MPT /8" MPT O-rings, Viton O-rings (Viton) 148
4 Twist Seal Couplers Double Shut-Off Couplers and Plugs Couples U.S.-standard pipe threads to 22mm Eu ro pe an fittings found on imported pressure washers. Internal O-ring with back ring seal assures no-leak operation Oversized high-impact plastic knob Machined-brass body 7.8 GPM max flow 4000 max pressure 302 F max temperature 3.9 to 4.2 oz weight Quick disconnect without drips and leaks Indispensable for in-plant multiple station systems Machined-construction brass, zinc-plated steel or stainless-steel Sockets PA 1/4" FPT PA 3/8" FPT PA 1/2" FPT PA 1/4" MPT PA 3/8" MPT PA 1/2" MPT PSI /8" FPT Socket (Brass) /4" FPT Socket (Brass) /8" FPT Socket (Stl Zinc) /8" FPT Socket (Brass) /2" FPT Socket (Brass) /2" FPT Socket (Stainless-Steel) /4" FPT Socket (Brass) /8" FPT Plugs (Brass) /8" FPT Plugs (Brass) /2" FPT Plugs (Brass) /8"" FPT Plugs (Steel / Zinc) 2250 Foster Double Shut-Off Quick Couplers Plugs PA 1/4" FPT PA 3/8" FPT PA 1/2" FPT PA 1/4" MPT PA 1/2" MPT O-rings O-rings, 22 mm viton Back Ring, 2.4 x 9.3 Extended Twist Seal Coupler PSI: 3600 GPM: 11 Temperature: 300 F Double O-ring seal Machined-brass body High-impact plastic knob Coupler 1/4" FPT x 22 mm F Plug 1/4" FPT x 22 mm M Part No Replacement O-rings RN013 O-ring 1/8" Nitrile RN110 O-ring 1/4" Nitrile RN112 O-ring 3/8" Nitrile RN114 O-ring 1/2" Nitrile RV110 O-ring 1/4" Viton RV112 O-ring 3/8" Viton RV114 O-ring 1/2" Viton Nitrile up to 210 F RN115 O-ring 3/32" Nitrile (for kit 1) Quick Couplers - Brass Designed for 4000 PSI and extended durability. EPDM O-rings as standard. Affordable and rugged all in one. Part No Description Description Coupler 1/4" Socket FPT Coupler 1/4" Socket MPT Coupler 3/8" Socket FPT Coupler 3/8" Socket MPT Coupler Socket, Double Shut Off, 1/4" FPT Brass Coupler Plus, Double Shut Off, 1/4" FPT Brass Use Viton for 230 F and above 149
5 Swivels - 90 Excellent for car wash booms and hose reels. Remarkable value, comparable to best swivels made. Gun Swivel Made of corrosion-resistant material and stainless-steel, self-lubricated bearings, the new gun swivel offers highest-quality Swissmade craftsmanship. Forged-brass body 4000 PSI 225 F Nitrile O-ring 4000 PSI 250 F temperature 30 RPM /8" M x 3/8" F /8" F x 3/8" F /2" M x 1/2" F /2" F x 1/2" F /2" M x 3/8" F /8" F x 3/4" M w/ 3/8" inside thread Repair Kit Swivels Right Angle swivel rotation 3000 PSI max pressure (brass) 5000 PSI max pressure (stainless-steel) Swivel Stainless-steel 3/8" Swivel Brass 3/8" Swivel Brass 1/2" Repair Kit 3/8" for and Repair Kit 1/2" for Swivels - Stainless-Steel, High-Pressure and Economy Brass 10.5 GPM max flow (stainless-steel) 7.8 GPM max flow (brass) 320 F max temperature (stainless-steel) 195 F max temperature (brass) Highly resistant to harsh chemicals Live swivel at full pressure 6 oz weight Gun Swivel DGV 1/4" NPTF Gun Swivel DGV 3/8" NPTF Swivels A 3/8" MPT x FPT* A 3/8" FPT x FPT* /8" FPT x FPT, Brass Seal Kit Rebuild Kit *Long body style Swivels - Stainless-Steel /8" MPT x FPT /8" FPT x FPT Seal Kit Rebuild Kit Swivels even at 3000 PSI Brass housing Stainless-steel flow-through bolt Close-tolerance fit ensures leakproof seal Teflon ring provides free swivel Swivels even at 4000 PSI 200 F max temperature All stainless construction Teflon swivel ring Rebuildable 3/8" in and out PSI Swivel, Stainless-Steel 1/4" M x F Swivel, Stainless-Steel 3/8" M x F Swivel, Brass 3/8" M x F Repair Kit for and
6 Swivels Ball Bearing Swivels freely even at maximum pressure level noted below. MPT x FPT all sizes Brass and stainless-steel materials PSI /4" /4" /8" /8" /4" Repair Kit Swivels Stainless-Steel Ball Bearing Hardened, stainless-steel body Nitrile Buna seals 3500 PSI max pressure 180 F max temperature M x F NPT thread Ball-bearing design ensures free swivel action under pressure Suitable for extended-wear application /4", 6.8 GPM Repair Kit for /8", 10.6 GPM Repair Kit for /2", 27.0 GPM Repair Kit for Adapters Brass Part No Old No FPT x MPT /8" x 1/8" /4" x 1/8" /4" x 1/4" /8" x 1/8" /8" x 1/4" /8" x 3/8" /2" x 1/4" /2" x 3/8" /2" x 1/2" /4" x 1/2" /4" x 3/4" Bushings Brass Part No Old No MPT X FPT /4" x 1/8" /8" x 1/4" /8" x 1/8" /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" Hex Couplings Brass Part No Old No FPT /8" /4" /8" /2" /4" Hex Couplings - Reducing Brass /4" x 1/8" F /8" x 1/4" F /2" x 1/4" F /2" x 3/8" F /4" x 1/2" F Hex Nipples Double Brass /8" x 1/8" M /4" x 1/4" M /8" x 3/8" M /2" x 1/2" M /4" x 3/4" M " x 1" M JIC Swivels /4" Barb x 1/4" JIC FPT, Brass /2" Barb x 1/2" JIC FPT, Brass /4" Barb x 3/4" JIC FPT, Brass /2" JIC FPT x 3/8" MPT, Steel /2" JIC FPT x 1/2" MPT, Steel Nipples Brass /8" Close /4" Close /8" Close /2" Close /4" Close /8" x 1-1/2" /8" x 2-1/2" /4" x 1-1/2" /4" x 2" /4" x 2-1/2" /8" x 1-1/2" /8" x 2-1/2" /8" x 3" /2" x 1-1/2" /2" x 3" /4" x 2" /4" x 3" Close Nipple 151
7 Hex Reducing Nipples Brass Male Branch Tees Brass Part No Description Part No Description Part No Description Part No Description /4" x 1/8"M /2" x 1/4"M /4" /2" /8" x 1/8"M /2" x 3/8"M /8" /8" x 1/4"M /4" x 1/2"M Elbows 90 Brass Street Tees Brass /8" FPT /4" FPT /8" FPT /2" FPT /4" FPT /4" /8" /2" /4" /4" x 1/4" MPT /8" x 3/8" MPT /2" x 1/2" MPT /2" JIC x 3/8" MPT /2" JIC x 1/2" MPT Reducing Elbows /4" FPT x 1/8" FPT /8" FPT x 1/4" FPT /4" x 1/8" MPT /8" x 1/8" MPT /8" x 1/4" MPT /2" x 3/8" MPT Female Crosses Brass Extruded /4" /2" /8" /4" Check Hose Barbs JIC x Pipe Nipples Part No Size /2" JIC x 1/4" FPT /2" JIC x 3/8" FPT /2" JIC x 3/8" MPT /2" JIC x 1/2" MPT Street Elbows Brass 1/4" MPT x 1/4" barb Brass body Buna or Viton check ball Check Hose Barb Viton Check Hose Barb Buna JIC Nipples Brass /8" M x F /8" M x F /4" M x F /4" M x F /8" M x F /8" M x F /2" M x F /2" M x F /4" M x F /4" M x F Extruded or Forged Tees Brass /8" F /2" F /4" F /4" F /8" F /2" JIC x 1/4" MPT /2" JIC x 3/8" MPT /2" JIC x 1/2" MPT /2" JIC x 3/4" MPT /2" JIC x 1/2" FPT /2" JIC x 3/8" FPT /2" JIC x 1/4" FPT /2" JIC x 3/4" FPT /4" JIC x 3/4" Pipe MPT /2" JIC x 3/4" GHF
8 Hose Barbs Brass Swivel Hose Barbs Low Pressure 90 Barb x MPT Barb x MPT Part No Old No Barb x MPT /4" x 1/8" /4" x 1/4" /8" x 1/4" /8" x 3/8" /8" x 1/2" /2" x 1/4" /2" x 3/8" /2" x 1/2" /8" x 3/8" /8" x 1/2" Barb x MPT /8" X 1/4" /4" X 1/8" /4" x 1/4" /4" x 3/8" /4" x 1/2" /8" x 1/8" /8" x 1/4" /8" x 3/8" /8" x 1/2" /8" x 3/4" /2" x 1/4" /2" x 3/8" /2" x 1/2" /2" x 3/4" /8" x 3/8" /8" x 1/2" /8" x 3/4" /4" x 1/2" /4" x 3/4" Barb x FPT /4" X 1/4" 300 PSI max pressure 210 F max temperature Brass MPT base with steel hose barb Orificed Hose Barb Inexpensive way to create suction on inletside of pump Used in-line from float tank to pump One-piece, machined-brass 3/8" MPT x 5/8" barb Drain Cocks Hex Head Plugs Swivel easily at low pressure to eliminate twists and tangles in chemical or water lines /4" x 1/4" /8" x 3/8" /2" x 1/2" Standard orifice 5/32" drill up to 3/8" to fit your need Orificed Hose barb /4" Fuel Drain w/ Tee Handle /4" Fuel Drain w/ Barb and Tee Handle Push-N-Lock Barbs Normally requires no clamps Barb x Barb Part No Old No Barb x MPT /4" x 1/8" /4" x 1/4" /4" x 3/8" /8" x 1/8" /8" x 1/4" /8" x 3/8" /8" x 1/2" /8" x 3/4" /2" x 1/4" /2" x 3/8" /2" x 1/2" /2" x 3/4" /8" x 3/8" /8" x 1/2" /8" x 3/4" /4" x 1/2" /4" x 3/4" Barb x Barb /4" x 1/4" /8" x 3/8" /2" x 1/2" /8" x 5/8" /4" x 3/4" Hex Socket Head Plugs Pipe Thread Hex Nuts /8" /4" /8" /2" /4" A 1/8" A 1/4" A 3/8" A 1/2" /8" /4" /8" /2" /4" 153
9 Garden Hose Fittings MGH = male garden hose FGH = female garden hose Heavy-duty, machined-brass fittings Hose Clamps WARNING: LOW-PRESSURE USE ONLY! Not for use on pressure washer discharge hose Swivel Fittings 3/4" FGH /4" MPT /8" MPT /2" MPT /2" FPT (S-1) /4 FGH Swivel w/ 1/2" MPT Strainer /4" FPT (S-2) /4" FGH (S-3) /2" Barb /8" Barb /4" Barb Garden Hose Quick Couplers Female Hose Coupler Male Hose Plug Garden Hose Accessories Garden Hose Washer Filter Screen Washer (30-mesh) Solid Fittings /4" MGH x 3/8" MPT /4" MGH x 1/2" MPT /4" MGH x 3/4" MPT /4" FGH x 1/2" FPT /4" FGH x 3/4" FPT /4" FGH x 1/2" MPT /4" FGH x 3/4" MPT /4" FGH x 3/4" FGH (Stainless-Steel) Hose Barb Fittings /8" Barb x 3/4" MGH /2" Barb x 3/4" MGH /8" Barb x 3/4" MGH /4" Barb x 3/4" MGH /8" Barb x 3/4" FGH /2" Barb x 3/4" FGH /8" Barb x 3/4" FGH /4" Barb x 3/4" FGH Stainless-steel band and housing Worm gear tensions Nylon Speedi-Clamp tightens with a snap Releases with a twist Part No Old No Band OD Min-Max mm 5/16" mm 5/16" mm 5/16" H8 1/2" H10 1/2" H12 1/2" H16 1/2" H32 1/2" Red Spring Clamp Green Spring Clamp * X 1/4" ID Speedi-Clamp * X 3/8" ID Speedi-Clamp * X 1/2" ID Speedi-Clamp *50/pk Zinc-plated Heavy Wall Steel Pipe Fittings Up to 6000 PSI working pressure (18,000 PSI burst) Attractive zinc-plated protective coating U.S.-standard taper pipe threads Adapters Steel Part No Old No MPT x FPT Working Pressure /4" x 1/4" /4" x 3/8" /8" x 3/8" /8" x 1/2" /2" x 1/2" /2" x 3/4" /4" x 3/4"
10 Hex Coupling Steel Street Tee Steel Part No Old No FPT x FPT Working Pressure /4" x 1/4" /8" x 3/8" /2" x 1/2" /4" x 3/4" 5000 Reducing Couplings /8" x 1/4" /2" x 3/8" /2" x 1/4" /4" x 1/2" 4000 Part No Old No FPT x MPT Working Pressure /4" /8" /2" /4" 3000 Elbow Steel Hex Nipple Steel Part No Old No FPT x FPT Working Pressure /4" x 1/4" /8" x 3/8" /2" x 1/2" /4" x 3/4" /8" x 1/4" /2" x 1/4" /2" x 3/8" /4" x 1/2" 6000 Part No Old No FPT x FPT Working Pressure /4" x 1/8" /4" x 1/4" /4" x 3/8" /8" x 3/8" /8" x 1/2" /2" x 1/2" /2" x 3/4" /4" x 3/4" 4000 Working Pressure /2" JIC x 3/8" MPT /2" JIC x 1/2" MPT /2" JIC x 1/4" MPT /2" JIC x 3/4" FPT 5000 Street Elbow Steel Tee 3 Connects Part No Old No MPT x FPT Working Pressure /4" x 1/4" /4" x 3/8" /8" x 3/8" /8" x 1/2" /2" x 1/2" /2" x 3/4" /4" x 3/4" 3000 Elbows - 45 Part No Old No FPT Working Pressure /4" /8" /2" /4" 3000 Part No MPT /4" Cross 4 Connects Part No FPT x FPT /8" x 3/8" /4" x 1/4" Part No Old No FPT Working Pressure /4" /8" /2" /4"
11 Reducing Bushing Steel Pipe Street Elbows Part No Old No MPT x FPT Working Pressure /8" x 1/4" /2" x 1/4" /2" x 3/8" /4" x 1/2" 6000 Part No Old No MPT x FPT /4" /8" /2" /4" Hex Pipe Plugs Steel Pipe Tees Working Pressure /4" /8" /2" /4" 6000 Part No Old No FPT x FPT x FPT /4" /8" /2" /4" Pipe Nipple Zinc Merchant Coupling Part No Old No Length x MPT Working Pressure " x 1/4" " x 1/4" " x 1/4" " x 3/8" " x 3/8" " x 3/8" " x 1/2" 6000 Part No Old No FPT x FPT /4" /8" /2" Banded Coupling Part No Old No Length x MPT Working Pressure " x 1/2" " x 1/2" T 5" x 1/2" " x 3/4" " x 3/4" " x 3/4" " x 3/4" 6000 Galvanized Pipe Fittings Pressed-steel fittings external galvanized for excellent chemical re sis tance Ideal for supply line (city water pressure) applications (working pressure rating 125 PSI) NOT recommended for high-pressure piping applications. Part No Old No FPT x FPT /4" /8" /2" /4" Elbows - 90 Part No Old No FPT x FPT /4" /8" /2" /4" 156
12 Filter - The Big One Larger, heavier, and with more filtering area than competitors filters. Corrosion-resistant plastic Stepped 1/4" and 3/8" hose barb Weighted to hold on to bottom of tank With Check Valve Without Check Valve Chemical Filter - Brass 50-mesh, stainless-steel screen. Removable mesh for easy cleaning. Heavy-duty, one-piece brass body holds the filter on the bottom of tank. 1/4" hose barb Stainless-steel check ball X With Check Valve X Without Check Valve Chemical Strainer - Plastic Polypropylene and brass construction. 7mm hose barb w/ Check Valve w/o Check Valve Chemical Line w/ Filter 6-foot long, 1/4" clear vinyl tubing X Chemical Line/ Filter w/ Check Valve (Brass Filter) X Chemical Line/ Filter w/ Check Valve (Plastic Filter) X Chemical Line/ Filter w/o Check Valve (Plastic Filter) Filters - Heavy-Duty In-Line In-Line Filter - Green-Cap The Original Green-Cap! 6 GPM max flow 40-mesh stainless screen Diecast metal housing/ plastic cap 1/2" FPT inlet 1/2" MPT outlet Two 1/4" side ports 145 PSI max pressure Green Cap Filter Replacement Screen Replacement Cap Replacement O-Ring In-Line Filter - All Metal Die-cast aluminum body and cover Black anodized finish 38-mesh screen 170 PSI max pressure 195 F max temperature 6.6 GPM max flow 1/2" female x male All Metal Line Filter Replacement Filter Filters - Clear Bowl Low-profile style MPT inlet and outlet White nylon body Clear bowl Stainless-steel screen L: 3", W: 1-3/4", H: 2-3/8" /4", 40-Mesh Screen /4", 80-Mesh Screen /8", 40-Mesh Screen /8", 80-Mesh Screen /2", 40-Mesh Screen /2", 80-Mesh Screen Mesh Replacement Scrn Mesh Replacement Scrn 1/2" female x male 50-mesh screen 8 GPM max flow 145 PSI max pressure 140 F max temperature Unbreakable reinforced nylon cap Filter With Auxiliary (bypass) Port Replacement Filter 157
13 In-Line Can-Type Filters and Parts In-Line ClearView Filter 40- or 80-mesh filtration Heavy-duty molded plastic with stainless-steel screen Hanger tab standard on 3/8", 1/2" and 3/4" Choose black or clear filter cans 40-Mesh Filters Black, 3/8" Black, 1/2" Black, 3/4" Black, 1" Black, 1-1/4" Black, 1-1/2" Clear, 3/8" Clear, 1/2" Clear, 3/4" Clear, 1" Clear, 1-1/4" Clear, 1-1/2" 80-Mesh Filters Black, 1/2" Black, 3/4" Black, 1" Black, 1-1/4" Black, 1-1/2" Clear, 1/2" Clear, 3/4" Clear, 1" Clear, 1-1/4" Clear, 1-1/2" In-Line Can-Type Filter Parts 3/8", 1/2", 3/4" Gasket Viton Gasket Bowl Standard Black Bowl Clear Mesh Screen Mesh Screen /8" Top with Tab /2" Top with Tab /4" Top with Tab In-Line Can-Type Filter Parts 1", 1-1/4", 1-1/2" Gasket Viton Gasket Mesh Screen 1" Mesh Screen 1-1/4" Mesh Screen 1-1/2" Mesh Screen 1" Mesh Screen 1-1/4" Mesh Screen 1-1/2" " Filter Top /4" Filter Top Bowl Black 1", 1-1/4", 1-1/2" Bowl Clear 1", 1-1/4", 1-1/2" Stainless-steel screen Combination 1/2" / 3/4" hose barb Y-Trap Strainer Brass bodies and cap FPT inlet and outlet Stainless-steel 50-mesh cylinder screen 170 PSI max pressure 194 F max temperature Check/Foot Valve Includes backflow check and perforated screen, prevents damage to pump or control valves. Removable stainless-steel screen Spring-loaded check valve Cast-brass bodies FPT outlet Suction Foot Valve - ST35/35R Stainless-steel screen Combination 1/2" / 3/4" hose barb Weighted to hold at bottom of tank or source Weighted to hold at bottom of tank or source /8" NPT x 3/4" GH /8" NPT x 3/4" GH w/ 1/4" Bypass /2" NPT x 3/4" GH /2" NPT x 3/4" GH w/ 1/4" Bypass Part No Old No FPT /4" /8" /2" /4" " /2" Foot Valve/ Check and Screen /4" Brass Spring Check Valve " Brass Spring Check Valve /2" Brass Spring Check Valve " Brass Spring Check Valve With Check Valve Without Check Valve 158
14 Tank Screen/Strainer Stainless-steel screen 40- or 50-mesh PVC base attaches to nipple or tubing Use for tank drain or chemical line Part No Old No Mesh FPT /4" /8" /2" /2" /4" /4" " /2" In-Line High-Pressure Nozzle Filters Protect your turbo nozzle from damage caused by debris in the water flow. Filter and Parts - High-Volume Molded plastic housing. 3/4" FPT inlet and outlet 125 PSI max pressure 12 GPM max flow at 50 micron 10 GPM max flow at 5 or 20 micron Clear-view sump 14-1/2" tall x 5-1/2" port to port Housing Only X Mounting Bracket/Hardware Replacement O-Ring Pleated polyester/polypropylene core Recommended for large flow, low-pressure applications (up to 60 PSI) Ultra Fine Filter Elements Micron, 10 GPM Micron, 10 GPM Micron, 12 GPM Recommended for maximum filtration with reduced flow requirements (up to 130 PSI) /4" MPT outlet 300 F max 100-mesh screen 5000 PSI max Part No Old No Material Inlet Outlet Brass 1/4" FPT 1/4" MPT Brass 1/4" QC 1/4" MPT SS 1/4" QC 1/4" MPT Brass 1/4" MPT 1/4" MPT Replacement filter for / Replacement filter for / Synthetic String Wound Elements Micron, 4 GPM Micron, 5 GPM Micron, 6 GPM Fuel Filters In-line, disposable /4" In/Out, Plas tic /4" In/Out, Metal /8" In/Out, Plastic 159
15 Clear Bowl Fuel Filter Aluminum housing Non-replaceable 120-mesh stainless-steel screen 1/4" x 1/4" Clear acrylic bowl Complete Unit Fuel Filter / Water Separator Fuel Filter / Water Separator The Max fuel system protector. 10 micron filtration Spin-on convenience Water-separation chamber 1/4" FPT inlet/outlet Easy-drain water/sediment bowl Complete Unit Element Plastic Bowl 10 micron filtration Spin-on convenience Water-separation chamber 1/4" FPT inlet / outlet Easy drain water / sediment bowl General Fuel Filter Element Can type 10 GPH max flow 10 micron filtration Inexpensive replacement Wool felt element Complete Unit * Element Only *Order 24 for a full case Element Blue Top Filter Racor Filter Funnel 3.9 GPM Telfon-coated, stainless-steel filter Separates free water and contaiminates from gasoline/diesel/kerosene Housing, 5" 1/2" F-F Housing, 5, 1" F-F Housing, 10", 1/2" F-F Housing, 10", 3/4" F-F Cartridge, 10" Poly Thread (Disposable) Cartridge, 5" Poly Thread (Disposable) Cartridge, 10" Nylon Mesh (Washable) Cartridge, 5" Nylon Mesh (Washable) Racor Filter Funnel 160
SS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationPart No. Original Part No. Original MPT No. FPT No. Description. Part No. Original Part No. Original MPT No. FPT No. Description
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationCOUPLERS, FITTINGS & FILTERS
Quick Couplers Precision brass design Unrestricted free flow 4000 PSI Brass Couplers, designed for 4000 PSI and extended durability. Affordable and rugged all in one. 826169 1/4" FNPT 826176 3/8" FNPT
More informationBP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationLegacy Rawhide Hose HOSE & HOSE REELS. Rawhide 1-Wire 4000 PSI Black Hose. Rawhide 1-Wire 3000 PSI Smooth Non-Marking Hose
Legacy Rawhide Hose Superior abrasion-resistant cover hose for use with hot or cold water pressure washer All standard 3/8" rawhide assemblies include: One solid end and one swivel end 8" molded vinyl,
More information' x 3/8" ID 275 F ' x 3/8" ID 275 F 4000
Landa Tuff-Skin Hose For use with hot or cold water pressure washers There is no other high-pressure hose as tough as Landa s Tuff-Skin hose. When tested to ISO 6945 / DIN 20024, the Tuff-Skin has proven
More informationHOSE & HOSE REELS Landa Tuff-Skin Hose For use with: hot or cold-water pressure Washer Greater Oil Resistance: Certified Burst Protection:
Landa Tuff-Skin Hose For use with: hot or cold-water pressure Washer T here is no other high-pressure hose as tough as Landa s Tuff-Skin hose. When tested to ISO 6945 / DIN 20024, the Tuff-Skin has proven
More informationFitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. x h Hub Sanitary 0321612
More informationHYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
More informationSERVICE INSTRUCTIONS Model 9670 Lubricant Pump
TM TM SERVICE INSTRUCTIONS Model 9670 Lubricant Pump 9670 DESCRIPTION Model 9670 Lubricant Pump is designed to pump light to heavy oils directly from the original container. This design features a 10:1
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More information00238 R4 BODY, BOLT ON TORQUE TUBE PRODUCT LINE: 916/18 DATE: 12/4/06
0 0 SH CAP SCREW, /-0 NC X / G PLAIN 00 NUT, NYLOCK, /-0 NC ZINC 00 HH CAP SCREW, /- NC X G ZINC 0 O-RING, -N0, -/ OD X / SECTION 00 WHEEL DRIVE MOTOR WITH KEY 0 00 GEAR, WHEEL DRIVE MOTOR 0 WASHER, /
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationLanda Tuff-Skin Hose HOSE & HOSE REELS. Tuff-Skin 2-Wire 6,000 PSI Hose. Tuff-Skin 1-Wire 4,000 PSI Hose
Landa Tuff-Skin Hose For use with: hot or cold water pressure washers There is no other high-pressure hose as tough as Landa s Tuff-Skin hose. When tested to ISO 6945 / DIN 20024, the Tuff-Skin has proven
More informationAir Hose Products.
Air Hose Products 1.1 Bulk Red Air Hose 1.2 Jackhammer Hose Assemblies 1.3 Air Tool Hose Assemblies 1.4 Hot Air Blower Hose 1.5 Yellow Wire Braid Air Hose Assemblies and Fittings 1.6 Air Hose Fittings
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationOperating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
More informationMTM Hydro's Italian SG Spray gun Series. MTM Hydro Foam Cannons: The Industry Standard in Cleaning
FOAM CANNONS KITS MTM Hydro's Italian SG Spray gun Series No more fighting with your hose to keep it from slamming into your car. The all new SGS28 Spray Gun boasts a best-in-class Stainless Steel Swivel
More informationDF-Series Pneumatic Couplings
Interchange Data: Parker 20-Series Manual Interchange (F-Series) Parker 30-Series Automatic Interchange (D-Series) Foster 3, 4, 5, and 6 Series Hansen 1000, 400, 500 (F-Series) Hansen 3000, 4000, 5000,
More informationM-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
More informationHT-Series Hydraulic Couplings
Interchange Data: Interchangeable to ISO16028 Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series 'A', Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Materials: Machined
More informationFITTINGS AND HOSES TOOL
FITTINGS AND HOSES INGERSOLL-RAND FITTINGS AND HOSES The Ingersoll-Rand line of ruggedly convenient hose reels and recoil hoses are pressurerated for optimized pneumatic performance, even in the toughest
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationParts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters
MP-1070A Rev. 9 Invensys Energy Metering 80 Liberty Boulevard DuBois, PA 15801 Telephone (814) 371-8000 FAX (814) 375-8460 Parts List 4 Model T-18 and T-27 Mark II Turbo-Meter Parts List 4 MODEL T-18 and
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationHOTSY High-Pressure Hose
HOSE & HOSE REELS HOTSY High-Pressure Hose For use with: hot or cold-water pressure washer here is no other high-pressure hose as tough as HOTSY s Tuff-Skin hose. When tested to ISO 6945 / DIN 20024, the
More informationRiser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
More informationGP ONE SPLIT DECK 9/4/2012 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
GP ONE SPLIT DECK PAGE G & P ONE GRINER SPLIT DECK SUB ASSEMBLY PARTS BREAK DOWN 4 2 24 20 2 6 0 36 24 7 27 2 2 25 3 32 2 24 28 24 8 7 24 5 2 25 2 20 2 4 3 2 34 5 26 22 2 27 35 22 3 30 6 9 29 8 29 2 9
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More information00278 R1 AXLE, FOR 1-1/8" FREE WHEEL HUBS
00 ACTUATOR VALVE, O-RING PORTS 00 C-CLIP, /" 00 SPRING, VALVE SPOOL RETURN 00 COLLAR, / ID 00 WASHER, / USS, ZINC 00 HH CAP SCREW, /- NC X -/ G ZINC 0 FITTING, 0-- 00 O-RING, - FITTING 000-BO RELIEF VALVE,
More informationQuick-Drain Installation Requirements Large Volume Drainage Models
Quick-Drain Installation Requirements Large Volume Drainage Models Installation of the Quick-Drain-QFLV and Quick-Drain-HFLV Fluid Management Systems is a straightforward process. These installation instructions
More informationMade in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS
Made in USA Valves VALVES FOR INSTRUMENTATION & PROESS SYSTEMS SSP Fittings orp. Table of ontents FloLok Product Overview... 3 FloLok Selection Guide... 11 Two-Way Ball Valves... 12 Three-Way Ball Valves...
More informationH4670/42192 Submersible Trash Pump
SERVICE MANUAL H4670/42192 Submersible Trash Pump Serial Code GLW Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 99916070 REV
More informationPLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
More informationBINKS TROPHY AIR SPRAY GUN
BINKS TROPHY AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationSherwin-Williams CONTRACTOR SERIES pressure washers Belt Drive Pressure Washers
PARTS BOOK Sherwin-Williams CONTRACTOR SERIES pressure washers Belt Drive Pressure Washers WARNING Always wear proper face protection when operating this machine. These pressure washers operate at very
More informationPARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
More information400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
More informationAccessories Catalog. May 2006 Catalog AC605
Accessories Catalog May 2006 Catalog AC605 Discount Limited Warranty For ninety days after the date of purchase, Discount Hydraulic Hose.com warrants the products in this catalog to be free from defect
More informationGRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationSeries 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om
Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment
More informationBeaded Hose Barbs 4601 (430292) 4603 (430392) 2 2 Pg. 83. Pg. 86 Beaded Hose Barb x MB 1-HS 2-MB. Pg. 85 Beaded Hose Barb x MB 1-HS 2-MB
Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 72-hour salt spray requirement. For
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationFitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. h x h x h Hub Sanitary
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationW1265V, W1265B, W1265CV PARTS DIAGRAM
Trail Warrior Quick Split -Ton Log Splitters Parts Breakdown W65V, W65B, W65CV PARTS DIAGRAM 37 3 30 37 5 5b 37 34 4 36 4 44 3 6 3 0 4 3 6 35 38 5 9 46 3 40 38 35 40 43 43 4 40 39 7 6 8 9 7 6 35 49 63
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationMODELS: CC3730TE / CC3740TE
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....
More informationSTONE EXTREME /29/2013 PART NUMBER
STONE EXTREME 700 PART NUMBER 005 STONEKOR LLC -800-6-059 customerservice@stonekor.com www.stonekor.com 9 0 6 0 6 5 0 8 6 5 7 STONE EXTREME 700 5 5 7 7 6 0 MACHINE: 005 5 5 8 7 8 9 0 9 STONEKOR LLC -800-6-059
More informationMODEL 1500, 2500 & 2700 MANUAL CONTROLS. Service Manual
MODEL 1500, 2500 & 2700 MANUAL CONTROLS Service Manual MODEL 1500, 2500 & 2700 MANUAL CONTROLS Manual Drive Assembly 1 11 2 6 7 9 10 8 PARTS LIST Item No. Quantity Part No. Description 1........... 1............
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationAir Accessories. Packaged. Distributed by:
Packaged Air Accessories Bushings Circle Clamps Couplers Coupler / Plug Sets Crosses and Tees Gauges Hex Nipples Hose Accessory Kits Hose Barbs Hose Repair Kits Manifold Assemblies Plugs Push Lock Sets
More informationEXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationJARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins
Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...
More informationPURESTREAM SYSTEM - ASSEMBLY GUIDE
PURESTREAM SYSTEM - ASSEMBLY GUIDE VISIT OUR WEBSITE : www.cagpurification.com our installment procedure videos in the PURESTREAM Piping section. NECESSARY TOOLS FOR INSTALLATION We suggest the use of
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS LT1 DISHWASHER ML-104239 LT1 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. D (June 2017) F-18581 Rev. D (June 2017) - 2 - HOBART 2017 Table
More informationMiniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More information240 Owner s Manual & Parts Book
0 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-188 Serial #:083-88, 0, 07-... Date --0 Contents Description Page To The Owner, Maintenance Safety Precautions
More informationMAASS Model J and JC Style PITLESS ACCESSORY OPTIONS
MAASS Model J and JC Style PITLESS ACCESSORY OPTIONS MADE in the USA PA Option with #370 Pressure Relief Valve PA (PITLESS ACCESSORY) OPTION Now available for Maass 1 Model J or JC Style Adapters, a 1/2
More informationCENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
More informationGOLIATH GUILLOTINE PIPE SAW
GOLIATH GUILLOTINE PIPE SAW 98-037 i TUBE & PIPE CUT-OFF MACHINES Mod. Goliath Guillotine Ser.No. E.H. WACHS COMPANIES 100 Shepard St. Wheeling Il. 60090 Patent Pending Part Number: 98-037 Revision No:
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationSECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationM-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #
M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationSuper Closeout Deals
Super Closeout Deals Fastronix dealers as well as the general public are welcome to purchase items from our Super Closeout Deals page. You will find a wide assortment of products PRICED TO MOVE! If you
More informationWESTERN STYLE STEEL. LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket
LATERAL COUPLER SET GALVANIZED Includes Band and Latch Assembly and Square Back Gasket 2" WBLCR200 3.00 lbs $ 29.48 3" WBLCR300 4.50 25.22 4" WBLCR400 6.00 41.85 *1" Outlet Standard, 3 4 " Available upon
More informationPrepare Base Assembly. (If pump is pre-assembled on base, go to step#8.)
F L Instructions Maxim 3000 Turbo Flush Installation INTRODUCTION Satellite portable restrooms and accessories must be assembled according to approved assembly procedures. Avoid variations in assembly
More informationLPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationAUTOMATIC ACCESS VALVES & FITTINGS
AUTOMATIC ACCESS VALVES & FITTINGS PIERCING VALVES SPLIT AIR CONDITIONER VALVE SACV2-04 2 WAY VALVE: 1 /4" inlet x 1 /4" flare outlet SACV3-04 3 WAY VALVE: 1 /4" inlet x 1 /4" flare outlet with 1 /4" access
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSpray Guns & Wands High-Pressure Spray Guns
TeeJet, Arag, and Hypro spray guns, wands, and tips. From small spot sprayers to highpressure tree sprayers, we have a spray gun for you. These spray guns can handle flows up to 30 gallons per minute and
More informationClocking a TD-04 Turbo Compressor Housing. Appendix A : AWIC Silicone and Tubing Fitting
Clocking a TD-04 Turbo Compressor Housing Appendix A : AWIC Silicone and Tubing Fitting Revision A: 7-13-2015 Tools: Metric Sockets (10, 12, 14, 17mm) 5mm Hex Key Large Internal Snap Ring Pliers 3/8 Socket
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationHigh Pressure LPG Hose 350 psi maximum working pressure. UL Listed E-350 sized for shipment by UPS.
High Pressure High Pressure LPG 350 psi maximum working pressure. UL Listed. 7132-25354E-350 sized for shipment by UPS. Size Size O.D. Spiral/Braid Wt./100 ft. Standard Reel Size 7132-25354 1/4" 0.610
More informationTWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
More informationThe Multi-Clamp System
Multi-Clamp The Multi-Clamp Multi-Clamp The MULTI-CLAMP SYSTEM enables you to route single line runs, multiple runs of the same line diameters, or multiple runs of various diameters. Multiple line runs
More informationParts Manual October 2014 Part Number
Flush Cut Hydraulic Hand Saw HS-0-F-0 0.00 -.03in³ (0GPM) ` Parts Manual October 04 Part Number 80309 www.diamondproducts.com Table Of Contents Saw Dimensions Blade Flange.. General Safety...3 Hand Saw
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: C Approved By: Quality Engineer Date: 201-1-9 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationlimiting factor on the thread type used.
1 Definition The diameters, threads per inch (TPI) and thread pitch, etc. are necessary to completely identify a thread. In a shop, specialty gauges are required to accurately gauge or identify threads.
More informationParts Manual October 2014 Part Number
Flush Cut Hydraulic Hand Saw HS-4-F-8 4.00 -.89in³ (8GPM) ` Parts Manual October 04 Part Number 803005 www.diamondproducts.com Table Of Contents Saw Dimensions Blade Flange.. General Safety...3 Hand Saw
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More information