FCC DoC TEST REPORT. ADDRESS : #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C.

Transcription

1 FCC DoC TEST REPORT REPORT NO. : FD990811E03 MODEL NO. : A-E0001 RECEIVED : Aug. 11, 2010 TESTED : Aug. 13 to 17, 2010 ISSUED DATE : Aug. 20, 2010 APPLICANT : LOGITECH FAR EAST LTD. ADDRESS : #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 31 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. Report No.: FD990811E03 1 Report Format Version 3.0.2

2 Table of Contents 1 CERTIFICATION SUMMARY OF TEST RESULTS MEASUREMENT UNCERTAINTY GENERAL INFORMATION GENERAL DESCRIPTION OF EUT GENERAL DESCRIPTION OF TEST MODE DESCRIPTION OF SUPPORT UNITS CONFIGURATION OF SYSTEM UNDER TEST EMISSION TEST CONDUCTED EMISSION MEASUREMENT LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST INSTRUMENTS TEST PROCEDURE DEVIATION FROM TEST STANDARD TEST SETUP EUT OPERATING CONDITIONS TEST RESULTS(MODE 1) TEST RESULTS(MODE 2) TEST RESULTS(MODE 3) RADIATED EMISSION MEASUREMENT LIMITS OF RADIATED EMISSION MEASUREMENT TEST INSTRUMENTS TEST PROCEDURE DEVIATION FROM TEST STANDARD TEST SETUP EUT OPERATING CONDITIONS TEST RESULTS PHOTOGRAPHS OF THE TEST CONFIGURATION INFORMATION ON THE TESTING LABORATORIES APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB...31 Report No.: FD990811E03 2 Report Format Version 3.0.2

3 1 CERTIFICATION PRODUCT : Logitech Wireless Headset F540 BRAND NAME : Logitech MODEL NO. : A-E0001 TESTED : Aug. 13 to 17, 2010 TEST SAMPLE : R&D SAMPLE APPLICANT : LOGITECH FAR EAST LTD. STANDARDS : FCC Part 15, Subpart B, Class B ANSI C CISPR 22: 1997, Class B ICES-003: 2004, Class B The above equipment (Model: A-E0001) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample s EMC characteristics under the conditions specified in this report. PREPARED BY :, DATE: Aug. 20, 2010 ( Midoli Peng, Specialist ) TECHNICAL ACCEPTANCE :, DATE: Aug. 20, 2010 ( Ray Yeh, Deputy Manager ) APPROVED BY :, DATE: Aug. 20, 2010 ( May Chen, Deputy Manager ) Report No.: FD990811E03 3 Report Format Version 3.0.2

4 2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks FCC Part 15 Subpart B, Class B CISPR 22: 1997, Class B ICES-003: Class B NOTE: Conducted Test PASS Radiated Test PASS Meets Class B Limit Minimum passing margin is db at MHz Meets Class B Limit Minimum passing margin is db at MHz The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B (g). Also the limits of ICES-003: 2004 and CISPR 22 are same. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR : This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.45 db 3.21 db 2.19 db 2.55 db Report No.: FD990811E03 4 Report Format Version 3.0.2

5 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. Logitech Wireless Headset F540 A-E0001 POWER SUPPLY DC 6V from power adapter POWER CORD DATA CABLE SUPPLIED I/O PORT ASSOCIATED DEVICES NOTE: DC output cable (unshielded, 0.85m without core) RCA to RCA Passthrough cable (Unshielded, 1.9m) Mini-USB headset charging cable(shielded, 1.2m) Mini-USB PS3 voice cable(shielded, 1.2m) Mini-USB port x2 RCA to RCA port x1(for XBOX) RCA to RCA port x1(for PS3) AUX IN port x1 Power adapter 1. The EUT must be supplied with a power adapter as following table: BRAND Logitech MANUFACTURY PI ELECTRONICS MODEL AD631MB INPUT POWER AC 100~240V, 50/60Hz, 0.13A DC 6V, 0.85A OUTPUT POWER DC output cable (unshielded, 0.85m without core) 2. For radiated test : The EUT was pre-tested under the following modes: Test Mode Mode A Mode B Description XBOX Mode : XBOX play music AUX Mode : ipod play music Mode C PS3 Mode : PS3 play music From the above modes, the worst case was found in Mode A. Therefore only the test data of the modes were recorded in this report individually. 3. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: FD990811E03 5 Report Format Version 3.0.2

6 3.2 GENERAL DESCRIPTION OF TEST MODE The EUT was tested under following test modes : Conducted test Test Mode Mode 1 Mode 2 Mode 3 Radiated test Test Mode Mode 1 Description XBOX Mode : XBOX play music AUX Mode : ipod play music PS3 Mode : PS3 play music Description XBOX Mode : XBOX play music Report No.: FD990811E03 6 Report Format Version 3.0.2

7 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID 1 TV MONITOR Panasonic TH-L26K10W NA 2 PLAYSTATION. 3 SONY CECHB FCC DoC 3 XBOX Microsoft XBOX 360 NA FCC DoC Logitech Wireless 4 Headset F540 (Headset) Logitech A-R0002 NA NA 5 ipod APPLE A1199 YM712NGUVQ5 FCC DoC No. Signal cable description m Audio cable x m USB cable. 3 NA m USB cable m Audio cable. NOTE: All power cords of the above support units are non-shielded (1.8m). Report No.: FD990811E03 7 Report Format Version 3.0.2

8 3.4 CONFIGURATION OF SYSTEM UNDER TEST USB cable(1.2m) Audio cable(1.9m) Audio cable(1.9m) Adapter (on test table) EUT 1. TV MONITOR 3. XBOX 2. PLAYSTATION. 3 (BOX) (BOX) Audio cable(1.8m) USB cable(1.2m) Wireless 5. ipod 4. Logitech Wireless Headset F540 (Headset) 3. XBOX (Rocker) 2. PLAYSTATION. 3 (Rocker) Report No.: FD990811E03 8 Report Format Version 3.0.2

9 4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: ) CISPR 22: 1997 (section 5) ICES-003: 2004 (Class A: section 5.2) (Class B: section 5.3) FREQUENCY Class A (dbuv) Class B (dbuv) (MHz) Quasi-peak Average Quasi-peak Average NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above TEST INSTRUMENTS DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL Test Receiver ESCS Mar. 09, 2010 Mar. 08, 2011 Line-Impedance Stabilization Network (for EUT) Line-Impedance Stabilization Network (for Peripheral) NSLK Sep. 23, 2009 Sep. 22, 2010 ESH3-Z /004 Oct. 26, 2009 Oct. 25, 2010 RF Cable (JYEBAO) 5DFB COBCAB-001 Nov. 24, 2009 Nov. 23, ohms Terminator 50 3 Oct. 28, 2009 Oct. 27, 2010 Software BV ADT_Cond_V7.3.7 NA NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C Report No.: FD990811E03 9 Report Format Version 3.0.2

10 4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C (section 7), CISPR 22 (section 9) and ICES-003: 2004 (section 4). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150 khz to 30 MHz was searched. Emission levels over 10dB under the prescribed limits could not be reported DEVIATION FROM TEST STANDARD No deviation Report No.: FD990811E03 10 Report Format Version 3.0.2

11 4.1.5 TEST SETUP Vertical Reference Ground Plane Test Receiver 40cm EUT LISN 80cm Note: 1.Support units were connected to second LISN. 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80 from other units and other metal planes Horizontal Reference Ground Plane For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: FD990811E03 11 Report Format Version 3.0.2

12 4.1.6 EUT OPERATING CONDITIONS For Mode 1 1. Turn on the power of EUT. 2. Set the EUT under typical use condition. 3. The support unit 3(XBOX) sends video messages to support unit 1(TV). 4. The support unit 3(XBOX) sends audio messages to EUT via one audio cable and then EUT sends the audio messages to support unit 4(Logitech Wireless Headset F540(Headset)) via wireless. For Mode 2 1. Turn on the power of EUT. 2. Set the EUT under typical use condition. 3. The support unit 5(iPod) sends audio messages to EUT via one audio cable and then EUT sends the audio messages to support unit 4(Logitech Wireless Headset F540(Headset)) via wireless. For Mode 3 1. Turn on the power of EUT. 2. Set the EUT under typical use condition. 3. The support unit 2(PS3) sends video messages to support unit 1(TV). 4. The support unit 2(PS3) sends audio messages to EUT via one audio cable and then EUT sends the audio messages to support unit 4(Logitech Wireless Headset F540(Headset)) via wireless. Report No.: FD990811E03 12 Report Format Version 3.0.2

13 4.1.7 TEST RESULTS(MODE 1) TEST MODE Mode 1 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60 Hz PHASE Line (L) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 13 Report Format Version 3.0.2

14 TEST MODE Mode 1 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60 Hz PHASE Neutral (N) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 14 Report Format Version 3.0.2

15 4.1.8 TEST RESULTS(MODE 2) TEST MODE Mode 2 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60Hz PHASE Line (L) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 15 Report Format Version 3.0.2

16 TEST MODE Mode 2 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60Hz PHASE Neutral (N) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 16 Report Format Version 3.0.2

17 4.1.9 TEST RESULTS(MODE 3) TEST MODE Mode 3 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60Hz PHASE Line (L) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 17 Report Format Version 3.0.2

18 TEST MODE Mode 3 6dB BANDWIDTH 9 khz INPUT POWER 120Vac, 60Hz PHASE Neutral (N) ENVIRONMENTAL CONDITIONS 25 deg. C, 50 % RH, 1014 hpa TESTED BY Eric Lee Freq. Corr. Reading Value Emission Level Limit Margin No Factor [db (uv)] [db (uv)] [db (uv)] (db) [MHz] (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811E03 18 Report Format Version 3.0.2

19 4.2 RADIATED EMISSION MEASUREMENT LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: ) ICES-003: 2004 (Class A: Section 5.4)(Class B: Section 5.5) FOR FREQUENCY BELOW 1000 MHz (47 CFR Part 15 Subpart B) FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) uv/m dbuv/m uv/m dbuv/m Above FOR FREQUENCY BELOW 1000 MHz (CISPR 22) FREQUENCY (MHz) Class A (at 10m) Class B (at 10m) dbuv/m dbuv/m Note: The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B (g) and ICES-003 clause 7. Also the limits of ICES-003: 2004 and CISPR 22 are same. LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz FREQUENCY (MHz) Class A (dbuv/m) (at 3m) Class B (dbuv/m) (at 3m) PEAK AVERAGE PEAK AVERAGE Above Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dbuv/m) = 20 log Emission level (uv/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: FD990811E03 19 Report Format Version 3.0.2

20 FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement used in the device or on which the Range (MHz) device operates or tunes (MHz) Below Above th harmonic of the highest frequency or 40 GHz, whichever is lower Report No.: FD990811E03 20 Report Format Version 3.0.2

21 4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Agilent E4443A MY July 29, 2010 July 28, 2011 Spectrum Analyzer E4443A MY Oct. 31, 2009 Oct. 30, 2010 Agilent N9039A MY Nov. 20, 2009 Nov. 19, 2010 Pre-Selector N9039A MY July 29, 2010 July 28, 2011 Agilent Signal Generator N5181A MY Aug. 12, 2010 Aug. 11, 2011 Mini-Circuits ZFL-1000VH2B AMP-ZFL-01 Nov. 18, 2009 Nov. 17, 2010 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-02 Nov. 18, 2009 Nov. 17, 2010 Mini-Circuits Pre_Amplifier (1~18GHz) ZVA-183-S+ AMP-ZVA-01 Nov. 18, 2009 Nov. 17, 2010 SPACEK LABS (15~40GHz) SLKKa K16 NA NA SCHWARZBECK VULB Sep. 30, 2009 Sep. 29, 2010 Trilog Broadband Antenna VULB Sep. 30, 2009 Sep. 29, 2010 SCHWARZBECK BBHA Sep. 30, 2009 Sep. 29, 2010 Horn Antenna BBHA D-783 Sep. 30, 2009 Sep. 29, 2010 RF CABLE NA RF RF Dec. 24, 2009 Dec. 23, 2010 RF Software ADT_Radiated_ V NA NA NA CT Antenna Tower & Turn Table NA NA NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 10m Chamber No. F. 3. The FCC Site Registration No. is The VCCI Site Registration No. is R-3252 & G The CANADA Site Registration No. is IC 7450H-1. Report No.: FD990811E03 21 Report Format Version 3.0.2

22 4.2.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C (section 8), CISPR 22 (section 10) and ICES-003: 2004 (section 4). a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10 meters chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters (3 meters -above 1GHz) away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference antenna DEVIATION FROM TEST STANDARD No deviation Report No.: FD990811E03 22 Report Format Version 3.0.2

23 4.2.5 TEST SETUP 10m 3m-above 1GHz Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration EUT OPERATING CONDITIONS 1. Turn on the power of EUT. 2. Set the EUT under typical use condition. 3. The support unit 3(XBOX) sends video messages to support unit 1(TV). 4. The support unit 3(XBOX) sends audio messages to EUT via one audio cable and then EUT sends the audio messages to support unit 4(Logitech Wireless Headset F540(Headset)) via wireless. Report No.: FD990811E03 23 Report Format Version 3.0.2

24 4.2.7 TEST RESULTS TEST MODE Mode 1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, 120kHz ENVIRONMENTAL CONDITIONS 23 deg. C, 67 % RH, 1014 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) QP H QP H QP H QP H QP H QP H QP H REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990811E03 24 Report Format Version 3.0.2

25 TEST MODE Mode 1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, 120kHz ENVIRONMENTAL CONDITIONS 23 deg. C, 67 % RH, 1014 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) QP V QP V QP V QP V QP V QP V QP V QP V REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990811E03 25 Report Format Version 3.0.2

26 TEST MODE Mode 1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Peak (PK) / Average (AV), 1MHz ENVIRONMENTAL CONDITIONS 22 deg. C, 72 % RH, 1014 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) PK H AV H PK H AV H REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990811E03 26 Report Format Version 3.0.2

27 TEST MODE Mode 1 INPUT POWER 120Vac, 60Hz FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Peak (PK) / Average (AV), 1MHz ENVIRONMENTAL CONDITIONS 22 deg. C, 72 % RH, 1014 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) PK V AV V PK V AV V REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990811E03 27 Report Format Version 3.0.2

28 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: FD990811E03 28 Report Format Version 3.0.2

29 RADIATED EMISSION TEST Report No.: FD990811E03 29 Report Format Version 3.0.2

30 6 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025: Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Tel: Fax: Hsin Chu EMC/RF Lab: Tel: Fax: Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: Fax: Web Site: The address and road map of all our labs can be found in our web site also. Report No.: FD990811E03 30 Report Format Version 3.0.2

31 7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: FD990811E03 31 Report Format Version 3.0.2

32 CONSTRUCTION PHOTOS OF EUT Page 1

33 Page 2

34 Page 3

35 Page 4

36 Page 5

37 Page 6

38 Page 7

39 Page 8