FCC DoC TEST REPORT. TESTED : Sep. 01 to 02, 2010 APPLICANT : LOGITECH FAR EAST LTD.

Transcription

1 FCC DoC TEST REPORT REPORT NO. : FD990901E04 MODEL NO. : Y-R0016 RECEIVED : Sep. 01, 2010 TESTED : Sep. 01 to 02, 2010 ISSUED DATE : Sep. 07, 2010 APPLICANT : LOGITECH FAR EAST LTD. ADDRESS : #2 Creation Rd. 4, Science-Based Ind. Park Hsinchu Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 18 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF, NVLAP, NIST or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: FD990901E04 1 Report Format Version 3.0.2

2 Table of Contents 1 CERTIFICATION SUMMARY OF TEST RESULTS MEASUREMENT UNCERTAINTY GENERAL INFORMATION GENERAL DESCRIPTION OF EUT GENERAL DESCRIPTION OF TEST MODE DESCRIPTION OF SUPPORT UNITS CONFIGURATION OF SYSTEM UNDER TEST EMISSION TEST RADIATED EMISSION MEASUREMENT LIMITS OF RADIATED EMISSION MEASUREMENT TEST INSTRUMENTS TEST PROCEDURE DEVIATION FROM TEST STANDARD TEST SETUP EUT OPERATING CONDITIONS TEST RESULTS PHOTOGRAPHS OF THE TEST CONFIGURATION INFORMATION ON THE TESTING LABORATORIES APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB...18 Report No.: FD990901E04 2 Report Format Version 3.0.2

3 1 CERTIFICATION PRODUCT : 2.4GHz Cordless keyboard BRAND NAME : Logitech MODEL NO. : Y-R0016 TESTED : Sep. 01 to 02, 2010 TEST SAMPLE : ENGINEERING SAMPLE APPLICANT : LOGITECH FAR EAST LTD. STANDARDS : FCC Part 15, Subpart B, Class B ANSI C CISPR 22: 1997, Class B ICES-003: 2004, Class B The above equipment (Model: Y-R0016) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample s EMC characteristics under the conditions specified in this report. PREPARED BY :, DATE: Sep. 07, 2010 ( Carol Liao, Specialist ) TECHNICAL ACCEPTANCE :, DATE: Sep. 07, 2010 ( Ray Yeh, Deputy Manager ) APPROVED BY :, DATE: Sep. 07, 2010 ( May Chen, Deputy Manager ) Report No.: FD990901E04 3 Report Format Version 3.0.2

4 2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks FCC Part 15 Subpart B, Class B Conducted Test NA Not Applicable CISPR 22: 1997, Class B ICES-003: Class B Radiated Test PASS Meets Class B Limit Minimum passing margin is db at MHz NOTE: The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B (g). Also the limits of ICES-003: 2004 and CISPR 22 are same. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR : This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz-18GHz) Value 4.00 db 2.44 db Report No.: FD990901E04 4 Report Format Version 3.0.2

5 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. 2.4GHz Cordless keyboard Y-R0016 POWER SUPPLY DC 2.8V from rechargeable battery POWER CORD DATA CABLE SUPPLIED I/O PORT ASSOCIATED DEVICES NOTE: NA NA NA rechargeable battery x 1 1. The EUT must be supplied with a rechargeable battery as following table: BRAND Maxell MODEL ML2032 OUTPUT POWER 2.8V 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. 3.2 GENERAL DESCRIPTION OF TEST MODE The EUT was tested under following test mode: Test Mode Mode 1 Description Normal mode Report No.: FD990901E04 5 Report Format Version 3.0.2

6 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID 1 PERSONAL COMPUTER 2 MONITOR DELL E228WFPc DELL DCSM F84QL1S FCC DoC CN-OX765G P-0C2M FCC DoC 3 PRINTER EPSON LQ-300+ DCGY FCC DoC 4 MODEM ACEEX IFAXDM MOUSE DELL M056UOA FOROOBSN FCC DoC 6 2.4GHz Transceiver Logitech C-U0007 NA CCAI10LP0020T1 No. Signal cable description 1 NA m braid shielded wire, terminated with VGA connector via metallic frame, with two cores m braid shielded wire, terminated with DB25 and centronics connector via metallic frame, w/o core m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame, w/o core m foil shielded wire, terminal by frame, USB Connector. 6 NA Note: The power cords of the above support units were unshielded (1.8m). Report No.: FD990901E04 6 Report Format Version 3.0.2

7 3.4 CONFIGURATION OF SYSTEM UNDER TEST 3. PRINTER 1. PC 2. MONITOR 4. MODEM 6 Wireless TEST TABLE 5. MOUSE EUT Note: The item 6 is 2.4GHz Transceiver Report No.: FD990901E04 7 Report Format Version 3.0.2

8 4 EMISSION TEST 4.1 RADIATED EMISSION MEASUREMENT LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: ) ICES-003: 2004 (Class A: Section 5.4)(Class B: Section 5.5) FOR FREQUENCY BELOW 1000 MHz (47 CFR Part 15 Subpart B) FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) uv/m dbuv/m uv/m dbuv/m Above FOR FREQUENCY BELOW 1000 MHz (CISPR 22) FREQUENCY (MHz) Class A (at 10m) Class B (at 10m) dbuv/m dbuv/m Note: The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B (g) and ICES-003 clause 7. Also the limits of ICES-003: 2004 and CISPR 22 are same. LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz FREQUENCY (MHz) Class A (dbuv/m) (at 3m) Class B (dbuv/m) (at 3m) PEAK AVERAGE PEAK AVERAGE Above Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dbuv/m) = 20 log Emission level (uv/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: FD990901E04 8 Report Format Version 3.0.2

9 FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement used in the device or on which the Range (MHz) device operates or tunes (MHz) Below Above th harmonic of the highest frequency or 40 GHz, whichever is lower TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL ADVANTEST Spectrum Analyzer U July 16, 2010 July 15, 2011 PSA Sevies Spectrum MY E4446A Analyzer UK6 May 12, 2010 May 11, 2011 HP Pre_Amplifier 8449B 3008A01922 Sep. 25, 2009 Sep. 24, 2010 ROHDE & SCHWARZ Test Receiver ESVS /002 Nov. 28, 2009 Nov. 27, 2010 SCHAFFNER(CHASE) Broadband Antenna CBL6112B 2798 Apr. 29, 2010 Apr. 28, 2011 Schwarzbeck Horn_Antenna BBHA9120-D1 D123 Sep. 21, 2009 Sep. 20, 2010 Schwarzbeck Horn_Antenna BBHA Sep. 30, 2009 Sep. 29, 2010 RF Switches MP59B Aug. 31, 2010 Aug. 30, 2011 RF Cable 8DFB STBCAB-001 Aug. 31, 2010 Aug. 30, 2011 Software ADT_Radiated_ V NA NA NA CT Antenna Tower & Turn Table NA NA NA NA CORCOM AC Filter MRI /019 NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) and Spectrum Analyzer (model: E4446A) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Open Site No. B. 4. The VCCI Site Registration No. is R The FCC Site Registration No. is The CANADA Site Registration No. is IC 7450G-2. Report No.: FD990901E04 9 Report Format Version 3.0.2

10 4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C (section 8), CISPR 22 (section 10) and ICES-003: 2004 (section 4). a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10-meter open field site. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters (3 meters -above 1GHz) away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference antenna DEVIATION FROM TEST STANDARD No deviation Report No.: FD990901E04 10 Report Format Version 3.0.2

11 4.1.5 TEST SETUP EUT& Support Units 80cm Ant. Tower 10m 3m-above 1GHz Turn Table 1-4m Variable Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration EUT OPERATING CONDITIONS 1. Turn on the power of all equipment. 2. Set the EUT under typical use condition. 3. PC sends "H" messages to monitor, and displays H messages on its screen. 4. PC sends "H" messages to modem. 5. PC sends "H" messages to printer, and the printer prints them on paper. 6. Repeat steps 2-5. Report No.: FD990901E04 11 Report Format Version 3.0.2

12 4.1.7 TEST RESULTS TEST MODE Mode 1 INPUT POWER DC 2.8V from rechargeable battery FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, 120kHz ENVIRONMENTAL CONDITIONS 25 deg. C, 68 % RH, 1015 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) QP H QP H QP H QP H QP H QP H REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990901E04 12 Report Format Version 3.0.2

13 TEST MODE Mode 1 INPUT POWER DC 2.8V from rechargeable battery FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Quasi-Peak, 120kHz ENVIRONMENTAL CONDITIONS 25 deg. C, 68 % RH, 1015 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) QP V QP V QP V QP V QP V QP V REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990901E04 13 Report Format Version 3.0.2

14 TEST MODE Mode 1 INPUT POWER DC 2.8V from rechargeable battery FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Peak (PK) / Average (AV), 1MHz ENVIRONMENTAL CONDITIONS 25 deg. C, 68 % RH, 1015 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) PK H AV H PK H AV H REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990901E04 14 Report Format Version 3.0.2

15 TEST MODE Mode 1 INPUT POWER DC 2.8V from rechargeable battery FREQUENCY RANGE MHz DETECTOR FUNCTION & BANDWIDTH Peak (PK) / Average (AV), 1MHz ENVIRONMENTAL CONDITIONS 25 deg. C, 68 % RH, 1015 hpa TESTED BY Andy Ho No. ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Freq. (MHz) Emission Level (dbuv/m) Limit (dbuv/m) Margin (db) Antenna Height (m) Table Angle (Degree) Raw Value (dbuv) Correction Factor (db/m) PK V AV V PK V AV V REMARKS: 1. Emission level(dbuv/m)=raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: FD990901E04 15 Report Format Version 3.0.2

16 5 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST Report No.: FD990901E04 16 Report Format Version 3.0.2

17 6 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025: Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Tel: Fax: Hsin Chu EMC/RF Lab: Tel: Fax: Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: Fax: Web Site: The address and road map of all our labs can be found in our web site also. Report No.: FD990901E04 17 Report Format Version 3.0.2

18 7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: FD990901E04 18 Report Format Version 3.0.2

19 CONSTRUCTION PHOTOS OF EUT Page 1

20 Page 2

21 Page 3

22 Page 4

23 Page 5

24 Page 6

25 Page 7

26 Page 8

27 Page 9

28 Page 10

29 Page 11

30 Page 12

31 Page 13