Product overview. ISOMETER Insulation monitoring devices ISOSCAN Insulation fault location systems EDS

Transcription

1 Product overview ISOMETER Insulation monitoring devices ISOSCAN Insulation fault location systems EDS

2 2

3 Find out today what will not happen tomorrow Reporting critical operating states today, so that unwanted incidents such as operational interruptions, costly material damage or even physical injuries do not happen. Safety of power supply To ensure electrical safety for people and electrical installations in an efficient way on a long-term basis, Bender offers insulation monitoring devices for all the key industries. In particular, these devices are used anywhere where a safe power supply is an essential requirement to prevent system failures, eliminate the risk of serious or fatal injuries and to avoid material damage. Top-level productivity and maximum safety for people and the electrical installation With Bender insulation monitoring devices for unearthed power supplies (IT systems) you are already using the technology of tomorrow with respect to reliability, measurement methods and design. Along with precise measurement technology, the ISOMETERs provide many functions for early detection and quality assurance with user-friendly and intuitive operation, reliable evaluation and simple communication. Fast localisation of insulation faults Bender insulation fault location systems enable fast localisation and elimination of insulation faults even during operation. Disconnection of the electrical installation is not required. Portable Bender solutions facilitate the use in large installations with sub-distributions. For more than 70 years, Bender has been a name for advanced technology using the latest Made in Germany measurement technology and outstanding technical expertise. Because of this, Bender offers an exceptionally long warranty period of five years. Contents Unearthed power supply systems 4 IT systems for information ahead of time 5 I nsulation monitoring devices ISOMETER Control and auxiliary circuits 6 Insulation fault location systems EDS...9 Insulation monitoring devices with locating current injector 20 Locating current injectors 2 Insulation fault locators ISOSCAN...22 Main circuits 8 Insulation fault locators with integrated transformer 23 Special applications 0 Accessories Coupling devices 6 Portable equipment for insulation fault location 24 Communication solutions...26 Gateways 7 IT systems used worldwide 28 Measuring instruments 8 Support during all phases 29 3

4 For a high level of operational and electrical system safety: Unearthed power supply systems (IT systems) Modern power supplies require maximum availability, safety and predictive information Given a wide variety of production processes, continuous competitive pressure, the impact of soaring costs and operational availability around the clock, the maximum possible electrical safety for power supplies is required. Although great care has been taken during the design and implementation phases and is continued throughout the maintenance cycle,electrical installations may nevertheless be impaired by factors such as humidity, ageing, dirt, mechanical damage, to mention but a few. Undetected insulation faults can be disastrous and costly, especially when factors such as production failure, repairs, device replacement or even unplanned service work are counted. Increasing availability - reducing costs The key objective of any system operator must be to recognise faults at an early stage and eliminate the cause in an efficient way. To achieve this objective, a possible solution uses unearthed power supplies (IT systems) with insulation monitoring. In IT systems, none of the active conductors is directly connected to earth. Therefore, on the occurrence of an insulation fault, only a small leakage current, essentially caused by system leakage capacitances, can flow. The upstream fuse does not trip, hence continuous power supply and operation is ensured. Prompt information about possible hazards is given by the ISOMETER which continuously monitors the insulation resistance between the system and earth. ISOMETER : A wide variety of solutions for all types of IT systems For the whole range of electrical power supplies, Bender provides appropriate solutions for most applications. Taking all types of system structures and loads into account, ISOMETER s using Bender's patented measuring principles guarantee reliable evaluation of the insulation resistance for: Nominal system voltages AC, DC or AC/DC up to 2 kv System configurations Ph, 3Ph, disconnected loads System leakage capacitances up to 2000 µf Response values from 0.2 kω to 0 MΩ Information advantage through the ISOMETER Principle of operation ISOMETER 4

5 IT systems - information ahead of time ISOMETER s in IT systems are an effective means of damage prevention, they enable increased productivity and optimised maintenance, which in turn lead to considerable reduction in costs. Bender's wide range of products allows the implementation of individual safety solutions and safeguards your investment. Optimised maintenance Recognise and signal insulation deteriorations early Localising faulty circuits automatically Optimising the planning of time and personnel resources Displaying information about the status of the electrical installation at a central location Remote diagnosis via Internet/Ethernet Increased protection against fire Recognising developing insulation faults at an early stage Minimising arcing faults, a frequent cause of fire S eparating areas prone to explosions and fire from the rest of the system by means of isolating transformers and monitoring them separately Improved economic efficiency Avoiding expensive and unscheduled stoppages Reducing personnel expenses and time and costs for maintenance Detecting weak points in the installation Supporting business decisions on investments High operational availabilty ON No interruption to operation in the event of a phase-to-earth fault No control malfunction in the event of insulation faults Electrical installations are kept at a high level of availability Monitoring electrical installations also during standstill Enhanced accident prevention Low touch currents in small and medium-sized installations o malfunctions in case of earth faults in the control circuits of equipment and N machines Higher permissible earthing resistance Higher earthing resistances, permissible, for example, for mobile power supplies 5

6 Maximum operational safety in control and auxiliary circuits ISOMETER IR420-D4 ISOMETER IR25Y-4 ISOMETER IR425 Circuits Control circuits Voltage system Auxiliary circuits Main circuits 3(N)AC AC V, DC V AC/DC V AC AC/DC DC AC V Frequency range fn AC Hz DC DC, AC Hz System leakage capacitance Ce µf Response value Ran kω Response value Nominal system voltage Un Alarm contacts 2 changeover contacts changeover contact 2 changeover contacts Operating principle N/O or N/C operation N/C operation N/O or N/C operation Response time tan (at RF = 0.5 x Ran and Ce = µf) s 6s 2s Start-up delay t 0 0 s 0 0 s Response delay ton 0 99 s 0 99 s Indication LC display Power On LED Installation Alarm LEDs DIN rail Screw mounting Ordering information Nominal voltage Un Supply voltage ) US AC V, Hz DC /AC V AC/DC V, Hz Device version with screw terminals on request. ) Absolute values Accessories 6 designation Art. No. Mounting clip for screw mounting ( piece per device) B Art. No. AC 6 72 V, Hz/DC V IR420-D4- B AC/DC V/DC Hz IR420-D4-2 B = Un IR25Y-4 B AC 6 72 V, Hz/DC V IR425-D4- B AC/DC V/DC Hz IR425-D4-2 B

7 In localised areas, such as machine control systems or safety lighting where space is limited, control and auxiliary circuits provide additional functions, such as command output, interlocking, messaging and measuring. For these circuits, particular emphasis is placed on operational reliability. Example applications AC control circuit with IR420 AC/DC control circuit with IR425 DC control circuit with IR425 7

8 Circuits High system availability in main circuits ISOMETER IR470LY ISOMETER IR470LY2-406 ISOMETER IRDH275(B) ISOMETER IRDH375(B) ISOMETER IR575 Control circuits Auxiliary circuits ISOMETER iso685 ISOMETER iso685p-425 Main circuits Voltage system 3(N)AC AC AC/DC DC Nominal system voltage Un AC, 3(N)AC V ) AC, 3(N)AC V ) AC, 3(N)AC V, DC 0 50 V ) AC V, DC V AC, 3(N)AC V DC V ) AC, 3(N)AC V DC V ) AC, 3(N)AC V DC V AC Hz AC Hz DC, AC 460 Hz DC Hz DC, AC Hz DC, AC Hz DC, AC Hz System leakage capacitance Ce µf µf Nominal voltage range Un expandable (via coupling devices) AGH204S-4/AGH520S Response value Ran kω Installation Communication Frequency range fn LC display AGH50W-4/ AGH204S-4/AGH520S AGH204S-4/AGH520S/ AGH676S AGH50W-4/ AGH50W-4/ AGH204S-4/AGH520S/ AGH204S-4/AGH520S/ AGH676S-4 AGH676S Prewarning display RS-485 interface DIN rail Screw mounting Panel mounting/wall fastening Ordering information Nominal voltage Un Supply voltage US Art. No. AC 230 V IR470LY-40 B AC V, DC V IRDH B AC 24 V IR470LY-40 B DC V IRDH ) B AC 42 V IR470LY-402 B DC V IRDH ) B AC V IR470LY-403 B AC 400 V IR470LY-405 B AC 500 V IR470LY-406 B AC 690 V IR470LY-407 AC 440 V ) ) 3) Supply voltage US Art. No. 2) 3) AC V, DC V IRDH275B-435 2) 3) B DC V IRDH275B-4273) B DC V IRDH275B-4253) B B AC V, DC V IRDH ) 3) B IR470LY-408 B DC V IRDH ) B ) DC V IR470LY-402 B DC V) IR470LY-4023 B DC V IRDH375B-4273) B AC 230 V IR470LY2-406 B AC V ) / DC 0 50 V ) IR ) B AC/DC V iso685-d B AC V, AC V/ DC V AC 6 72 V, DC V IR B AC V, DC V AC/DC 8 30 V iso685p B AC V ) 8 Nominal voltage Un AC V ) / DC V ) AC V, DC V IRDH375B-435 2) 3) AC 0 480/ DC B Absolute values 2) Device versions with GOST certificate available. Device version "Option-W" with increased shock and vibration resistance: Indicated by the letter "W" at the end of the order number.

9 Main circuits provide the power supply for electrical installations or buildings. These circuits include equipment for generating, converting, distributing, switching and consuming electrical energy. From the user's point of view, different types of loads should be distinguished between: pure AC loads (e.g. motors), AC/DC loads containing electronic components (e.g. converters) and pure DC loads (e.g. battery systems). Example applications AC main circuits with one motor AC/DC main circuits with a variable-speed drive COM460IP Coupled IT systems 9

10 Recognising faults at an early stage in specific applications AC, DC or AC/DC medium voltage systems Circuits ISOMETER IRDH275BM-7 Medical locations Photovoltaic ISOMETER IR427 ISOMETER 07TD47 ISOMETER isopv ISOMETER isopv425 ISOMETER isopv685 ISOMETER isopv685pfr Control circuits Auxiliary circuits Main circuits Voltage system 3(N)AC AC AC/DC DC Nominal system voltage Un AC, 3(N)AC/DC kv AC V ) AC 230 V AC 27 V via AGH-PV 3(N)AC V DC 0 00 V ) DC 0 00 V, AC V ) DC V DC V Frequency range fn DC, AC Hz AC Hz AC Hz via AGH-PV DC, Hz via AGH420 DC, Hz via AGH420 DC, Hz via AGH420 DC, Hz Response value Ran kω Installation Indication System leakage capacitance Ce µf LC display Power On LED Alarm LEDs DIN rail Screw mounting Ordering information Nominal system voltage Un ) 2) 0 Supply voltage ) US Art. No. AC V IRDH275BM-7 B AC V, Hz AC V, Hz IR427-2 B ) AC 230 V, Hz AC 230 V, Hz 07TD47 B AC 27 V, Hz AC 27 V, Hz 07TD47-33 B AC V, DC 0 00 V DC V isopv AGH-PV consisting of: isopv-327 (B W), AGH-PV (B W) B W AC V, DC 0 00 V AC V, DC V isopv AGH-PV consisting of: isopv-335 (B W), AGH-PV (B W) B W AC V, DC V AC V, Hz/DC V isopv425-d4-2 with AGH420 B ) DC V DC 8 30 V isopv B DC V DC 8 30 V isopv685pfr-425 B Absolute values Device version with screw terminals on request.

11 Our product range includes a variety of products, such as ISOMETER s for low-resistance DC systems, systems containing AC/DC medium-voltage converters up to 2 kv, mobile generators or disconnected loads. Should you have any questions, please do not hesitate to contact our Technical Sales Department. Standard-compliant solutions for Medical locations Photovoltaic Installations with a low level of insulation Disconnected loads Mobile generators Electric mobility Railway, rolling stock Example applications Monitoring of medium-voltage drives with IRDH275 and coupling device AGH675S-7 Rf Rf Rf Ce <2000µF PV generator unearthed (IT system) with nominal voltage DC 00 V and ISOMETER isopv with coupling device AGH-PV

12 Specific applications Circuits Installations with a low level of insulation Disconnected loads Mobile generators ISOMETER isolr275 ISOMETER IR470LY2-60 ISOMETER IR420-D6 ISOMETER IR423 ISOMETER IR23 Control circuits Auxiliary circuits Main circuits Voltage system 3(N)AC AC AC/DC DC via AGH-LR 3(N)AC V DC 0 00 V ) AC, 3(N)AC V ) Offline AC V AC V Frequency range fn via AGH-LR DC, Hz AC Hz via AGH520S, AGH676S-4 AC Hz AC Hz System leakage capacitance Ce µf Response value Ran kω /23 Installation Indication Nominal system voltage Un LC display Power On LED Alarm LEDs DIN rail Screw mounting Ordering information Nominal system voltage Un Supply voltage US) Art. No. DC V isolr AGH-LR-3 consisting of: isolr (B W), AGH-LR-3 (B W) B W AC V, DC V isolr AGH-LR-3 consisting of: isolr (B W), AGH-LR-3 (B W) B W AC 230 V IR470LY2-60 B AC V IR470LY2-603 B AC 400 V IR470LY2-605 B DC V) IR470LY2-602 B AC 6 72 V, Hz/DC V IR420-D6- B IR420-D6-2 B IR420-D64-2 IR423-D4- B B AC V, DC 0 00 V ) AC V AC V, Hz/DC V AC 6 72 V, Hz/DC V AC V AC V, Hz 2 ) Absolute values AC/DC V, Hz IR423-D4-2 B AC 6 72 V, Hz/DC V IR423-D4W- B W AC/DC V, Hz IR423-D4W-2 B W US = Un IR23P-4-2 B

13 Example applications Monitoring of de-energised loads with IR420-D6 (offline) Monitoring of mobile generators with IR423 3

14 Specific applications Circuits Electric mobility Railway, rolling stock ISOMETER IR55 ISOMETER isoev425 ISOMETER isorw425 Control circuits Auxiliary circuits Main circuits Voltage system 3(N)AC AC AC/DC Nominal system voltage Un DC V DC 0 00 V AC 0 793V ) AC/DC V Frequency range fn AC Hz DC, Hz DC Response value Ran kω Installation Indication System leakage capacitance Ce µf LC display Power On LED Alarm LEDs DIN rail Screw mounting Ordering information Nominal system voltage Un AC V, DC V ) 2) 3) 4 Supply voltage ) US DC 0 36 V Art. No. IR B V4 IR B V4 IR B CV43) IR B CV43) AC V, Hz/DC 0 00 V AC V, Hz/DC V isoev425-d4 with AGH420 B ) AC/DC V AC V, Hz/DC V isorw425-d4w-4 B W2) Absolute values Device version with screw terminal on request. Custom setting possible

15 Example applications Charger Vehicle coupler iso-f HV DC Circuit AC Load enable relay Drive enable relay IMD vehicle Monitoring of unearthed DC drive systems in electric vehicles with IR55 TN-C-S system Source Distribution Installation Feeder Input Vehicle Cable assembly Connector Vehicle inlet DC charger Electric vehicle L L2 L3 N PEN RCD required by IEC Mode 4 IT system PE Load Switch F DC + F DC - F RB Earthing at the source L IMD Control Pilot Function = N CP PP Note: Only one IMD may be active in each interconnected IT system M I n DC 6 ma (Option) Control Pilot Function PE Earthing in the distribution RAE CP PE RPE RA CP Inverter F DCIsolating transformer RESS V = PFC RCD type A DC contactor F DC+ Air condition other consumers = AC on-board charger with electrical separation IMD (Option) = 4 V on-board power system (electrical separated) Electrical Chassis / Protective equipotential bonding RTyre Monitoring of unearthed DC circuits for charging electric vehicles with isoev425 5

16 Accessories Coupling devices AGH50W-4 AGH204S-4 Application Device family Nominal system voltage Un IR470LY AGH675S-7 AGH676S-4 AGH675S-7MV5 AC/3(N)AC/DC 0...7,2 kv AC/3(N)AC 0 2 kv AC, 3(N)AC, DC 0 5,5 kv Extension of the nominal voltage range for ISOMETER s AC 0 50 V, DC V AC V / AC V AC/3(N)AC 0...7,2 kv IRDH275/375 IRDH275BM-7 IR420-D64 Nominal system voltage US Art. No. AC 0 50 V/DC V AC V/0 300 V AGH50W-4 B AGH204S-4 B (N)AC V AGH520S B AGH675S B AGH675S B AC/ 3(N)AC 0 2 kv, Hz AGH676S-4 B AC, 3(N)AC, DC 0 5,5 kv, Hz AGH675S-7MV5-500 B AC, 3(N)AC, DC 0 7,2 kv, Hz 6 AGH520S

17 Gateways System requirements Connection Functions Application COMTRAXX COM460IP COMTRAXX COM46MT COMTRAXX COM462RTU FTC470XDP COMTRAXX CP700 BMS-Ethernet-Gateway BMS-Ethernet-Gateway BMS-Modbus/RTU-Gateway BMS-PROFIBUS DP-Gateway Condition Monitor/Gateway Protocol input BMS BMS BMS BMS BMS, Modbus/RTU/TCP Protocol output Ethernet, Modbus/TCP Ethernet, Modbus/TCP Modbus/RTU PROFIBUS DP Ethernet, Modbus/TCP Indication LCD/LED LED LCD/LED LED 7 colour LCD Alarm messages, 2), 2, 3) Measured values, 2), 2, 3) Device parameter setting ) Alarm list ), 3) History memory ) ) Diagrams ), 3) Visualisation ) ) notification ) ) Device tests, 2) Data logger ) BMS 4) 4) ), 2) ) screw-type terminal screw-type terminal screw-type terminal screw-type terminal pluggable screw terminals Output RJ 45 RJ 45 screw-type terminal 9-pin SUB-D RJ 45 Supply voltage US AC/DC V AC 6 72 V, DC 6 94 V AC/DC V AC / DC V AC/DC V DC 24 V Internet Explorer, Opera, Firefox etc. with Silverlight plugin Browser Internet Explorer, Opera, Firefox etc. Internet Explorer, Opera, Firefox etc. with Silverlight plugin Ordering information Supply voltage/frequency range US Supply voltage/frequency range US for UL applications Power consumption Art. No. AC/DC V 5), Hz AC V, ma, Hz/ DC V, 0 35 ma 5 40 VA, 3.8 W COM460IP B AC 6 72 V, Hz/DC 6 94 V AC 6 72 V, ma, Hz/ DC 6 94 V, ma 4 VA COM460IP-24V B AC/DC V 5), Hz AC V, ma, Hz/ DC V, 6 2 ma VA, 2.4 W COM46MT B AC/DC V 5), Hz AC V, ma, Hz/ DC V, 0 35 ma VA, 2.4 W COM462RTU B AC/DC V FTC470XDP B DC 24 V/± 25 % typ. W, max. 26 W CP7006) B Available functions on the web server Accessible by means of a PC using a browser Available via protocol 3) On the device's own LC display 4) Limited device parameter setting 5) Absolute values 6) Device version with GOST certificate available. ) 2) 7

18 Accessories Measuring instruments Input current μa 0 20 ma μa 0 20 ma Dimensions (mm) 72 x x x x 96 Device family IR470LY IR470LY2-6 IRDH275/375 IRDH275B/375B IRDH575 Ordering information Scale Input current Dimensions Midscale (SKMP) 72 x 72 mm 20 kω μa 96 x 96 mm Division 0 20 ma 96 x 96 mm 20 kω μa 96 x 96 mm.2 MΩ 0 20 ma 8 20 kω 72 x 72 mm 20 kω Art. No B S-42 B B S-42 B B S-42 B B B S-42 B

19 Insulation fault location system EDS Fast localisation of insulation faults Fast localisation and elimination of insulation faults is required by DIN VDE (VDE ):. The IRDH575 in combination with the EDS system is a modular system to solve this problem. The application areas for EDS systems are highly diverse. They are operated/used for main and control circuits in, for example: Power stations Hospitals Paper industry Shipbuilding Oil and natural gas industry Traffic engineering Mining, open-cast mining Industrial plants Rolling mills Mechanical engineering Advantages of an insulation fault location system EDS isconnection of the electrical D installation is not required, insulation fault location takes place during operation ombination with portable C insulation fault location systems EDS3090/3090PG and EDS309/309PG Fast localisation of faulty circuits Reduced maintenance and repair costs I nformation about the location of the fault is centrally displayed COM460IP COM460IP Application example 9

20 Insulation monitoring devices ISOMETER with locating current injectors ISOMETER IRDH575 Application Nominal system voltage Un Supply voltage US Main circuit Control circuit Un (B) 3AC/AC V DC V (B version) Un (B) 3AC/AC V/DC V (version IRDH575B-4227, IRDH575B-4235) Un (B2) 3AC/AC V DC V (B2 version) Un (B2) AC V DC V (version IRDH575B-435, IRDH575B2-435, IRDH575B-4235) AC V DC V (version IRDH575B-435, IRDH575B2-435, IRDH575B-4235) DC 9,2 72 V (version IRDH575B-427, IRDH575BW-4227) DC 9,2 72 V (version IRDH575B-427, IRDH575BW-4227) 0/25/50 ma /2,5 ma ma kω Locating current Installation ISOMETER isomed427p Response values kω 0 MΩ kω 0 MΩ LC display 4 x 20 characters 4 x 20 characters Medical locations Un max AC V Us = Un Alarm relay 3 changeover contacts 3 changeover contacts changeover contact Interface/protocol RS-485 (BMS) RS-485 (BMS) RS-485 (BMS) Address range DIN rail Screw mounting Panel mounting/wall fastening Ordering information Nominal system voltage Un AC V AC V AC V DC V DC V DC V AC V, Hz Supply voltage US 4) Art. No. DC 9,2 72 V IRDH575B-4272) B AC V/DC V IRDH575B-435 B DC 9,2 72 V IRDH575B-4227) B AC V/DC V IRDH575B-4235 B DC 9,2 72 V IRDH575B2-427 B AC V/DC V IRDH575B2-435 B = Un isomed427p-2 B Measuring voltage Um 0 V for version for use in control circuits. Device version with GOST certificate available. 3) Absolute values 4) Device Option-W with increased shock and vibration resistance : Indicated by the letter W at the end of the order number. ) 2) 20

21 Locating current injectors for existing installations in combination with an existing insulation monitoring device Application Circuits Control circuits ISOSCAN PGH47 ISOSCAN PGH473 ISOSCAN PGH474 Stationary Stationary Stationary (med. locations) Main circuits Voltage system 3(N)AC AC AC/DC AC, 3(N)AC V DC V AC, 3(N)AC V DC V AC, 3(N)AC V DC V DC Nominal voltage Un max Response value Ran kω Installation System leakage capacitance Ce µf DIN rail Screw mounting Panel mounting/wall fastening Ordering information Circuits Main circuit Main circuit, med. locations Control circuit ) Locating current 25/0 ma ma 2.5/ ma BMS bus address range Supply voltage US AC Art. No. AC 230 V PGH47 B AC V) PGH47-3 B DC V) PGH47-2 B DC V) PGH47-23 B AC 230 V PGH47E B AC 230 V PGH474 B AC 230 V PGH474E B AC 230 V PGH473 B AC V) PGH473-3 B DC V) PGH473-2 B Absolute values 2

22 Insulation fault locators ISOSCAN EDS460-D/DG) EDS46-D Main circuit EDS490-D EDS49-D EDS460-L EDS46-L EDS490-L EDS49-L Control circuit US: DC 6 94 V, AC 6 72 V, Hz EDS460-D- EDS460-DG- ) EDS46-L- EDS490-D- EDS490-L- EDS460-L- EDS46-L- EDS490-L- EDS49-L- US: AC/DC V AC Hz EDS460-D-2 EDS460-DG-2 ) EDS46-L-2 EDS490-D-2 EDS490-L-2 EDS460-L-2 EDS46-L-2 EDS490-L-2 EDS49-L-2 Response value 2 0 ma 0.2 ma 2 0 ma 0.2 ma 2 0 ma 0.2 ma 2 0 ma 0.2 ma Residual current indication 00 ma 0 A ) 0 ma A 00 ma 0 A 0 ma A 00 ma 0 A 0 ma A 00 ma 0 A 0 ma A Scanning time < 0 s for up to 080 measuring channels Parameter setting function Indication LC graphical display 7-segment display/led indication Error code indication Number of measuring channels 2 Address range 90 Internal clock (RTC) History memory Alarm relay "Common alarm 2 x changeover contact Alarm relay per channel ) 2 x N/O contact 2 x N/O contact E DS460-DG- particularly for localising insulation faults in DC IT systems with a number of branch circuits with high system leakage capacitances. Residual current indication: 20 ma 2 A Ordering information Circuits Measuring range EDS function RCM function Alarm relay per channel Supply voltage2) US AC 6 72 V, Hz/ DC 6 94 V Control circuit AC/DC V, AC Hz ma 0 ma A AC 6 72 V, Hz/DC 6 94 V 2 x N/O contact 4) 22 EDS46-L- B LC graphical display EDS46-D-2 B segment display/led indication EDS46-L-2 B LC graphical display EDS49-D- B segment display/led indication EDS49-L- B B EDS460-D- B segment display/led indication EDS460-L- B LC graphical display EDS460-D-2 B segment display/led indication EDS460-L-2 B LC graphical display EDS490-D- B segment display/led indication EDS490-L- B LC graphical display EDS490-D-2 B segment display/led indication EDS490-L-2 B AC 6 72 V, Hz/DC 6 94 V LC graphical display EDS460-DG-3) 4) B AC/DC V, AC Hz LC graphical display EDS460-DG-23) 4) B AC 6 72 V, Hz/DC 6 94 V 2 x N/O contact Absolute values Device version with GOST certificate available. Device version "Option-W": with increased shock and vibration resistance. Measuring current transformers on request 7-segment display/led indication LC graphical display 00 ma 0 A 3) B B AC/DC V, AC Hz 2) EDS46-D- EDS49-L-2 AC/DC V, AC Hz LC graphical display EDS49-D-2 00 ma 2 A Art. No. LC graphical display AC 6 72 V, Hz/DC 6 94 V 2 50 ma 7-segment display/led indication AC/DC V, AC Hz Main circuit Indication

23 Insulation fault locators ISOSCAN with integrated measuring current transformers ISOSCAN EDS50 ISOSCAN EDS5 Application Stationary Stationary, Medical locations Voltage system Main circuit Control circuit 3(N)AC AC AC/DC DC acc. to characteristic curve acc. to characteristic curve Response value Ran kω acc. to characteristic curve acc. to characteristic curve Installation Nominal voltage Un max System leakage capacitance Ce µf DIN rail Screw mounting Panel mounting/wall fastening Ordering information ) Response value Circuits Measuring range Control circuit ma 0.5 ma A Main circuit 5 25 ma 5 ma 0 A EDS function RCM function Supply voltage ) US Art. No. AC 7 24 V, Hz/ DC 4 28 V EDS5 B EDS50 B Absolute values 23

24 Portable equipment for insulation fault location Locating current injector PGH Application Nominal system voltage Un Main circuit Control circuit energised offline energised 3AC, AC V DC V 3AC, AC V DC V AC V, DC V US AC 230 V PGH85 PGH86 PGH83 US AC V PGH85-3 PGH86-3 PGH83-3 Locating current IL max. 0/25 ma 0/25 ma /2.5 ma Insulation fault locator EDS95P LC display 3 x 6 characters Evaluating current IΔL ma Response value 0.2 /2 0 ma selectable Measuring clamps PSA mm mm 5 mm PSA3052 PSA365 (optional) PSA3320 PSA3352

25 Complete systems EDS3090 EDS309 Application range Main circuits Control circuits EDS309 components Operating manual Insulation fault locator Terminal connector 4 mm Adapter BNC/4 mm plug for transformers Adapter BNC-PS2 for WF transformers, optional Plug-in power supply unit for EDS95P Locating current injector Power supply cable for PGH8... Safety measuring lead, black Safety measuring lead, green/ yellow Safety claw grip, black Safety claw grip, green/yellow Coupling device, optional (EDS3096PV only: included with delivery) Measuring clamps 20 mm Measuring clamps 52 mm Measuring clamps 5 mm, optional EDS set, optional Measuring clamps Aluminium case with carrying strap PGH8 with accessories for Device type EDS95P with accessories EDS3090 EDS95P PSA3020 PSA3052 PSA365 EDS3090PG EDS95P PGH AGE85 PSA3020 PSA3052 PSA365 EDS3090PG-3 EDS95P PGH AGE85 PSA3020 PSA3052 PSA365 EDS309 EDS95P PSA3320 PSA3352 EDS309PG EDS95P PGH PSA3320 PSA3352 EDS309PG-3 EDS95P PGH PSA3320 PSA3352 EDS3092PG EDS95P PGH83 PGH PSA3320 PSA3020 PSA3352 PSA3052 EDS3096PG EDS95P PGH AGE85 PSA3020 PSA3052 PSA365 EDS3096PG-3 EDS95P PGH AGE85 PSA3020 PSA3052 PSA365 EDS3096PV EDS95P PGH AGE85 2 x PSA3052 Ordering information Main circuits Control circuits with EDS without EDS with EDS without EDS EDS460/490 Nominal voltage Un AC V, Hz/DC V AC V, Hz/DC V AC V, Hz/DC V EDS46/49 AC V, Hz/DC V Supply voltage US EDS3090 B EDS3090PG B AC V, Hz EDS3090PG-3 B AC 230 V, Hz EDS3096PG B AC V, Hz EDS3096PG-3 B EDS309 B AC 230 V, Hz EDS309PG B AC V, Hz EDS309PG-3 B EDS3092PG B EDS3096PV B AC V, Hz/DC V AC V, Hz/DC V AC 230 V, Hz AC V, Hz/DC V AC 230 V, Hz AC V, Hz/DC V Art. No. AC 230 V, Hz 25

26 Bender monitoring systems seamless communication Modern communication Due to the fact that increasing demands are placed on communication capability, data transparency and flexibility, the use of modern fieldbus and network technologies has become a must. Hence, operating, warning and fault messages via the Web or the network, for example, substantially contribute to increasing the transparency of power supply systems, and also allow a fast reaction to critical operating states. In addition, important messages can be transferred via SMS or s to the mobile phones or laptops of service personnel. Early information about the location and cause of a fault allow time and cost-efficient deployment of service personnel and can avoid equipment failure or damage to expensive devices. Web server Visualisation Electrical Safety Management The term "Electrical Safety management" means that Bender provides coherent solutions for the electrical safety of power supplies in all areas. Carefully matched products and systems with innovative measuring techniques, communication solutions for the visualisation of data from Bender monitoring systems as well as easy connection to fieldbus systems and to SCADA systems (Supervisory Control and Data Acquisition) provide the maximum possible safety, economic efficiency and transparency. The range of products is completed by comprehensive services, which extend right through the whole service life of the products. System overview Integrated functions Solution for BACnet Report Parameter Modbus/TCP... Solution for OPC Ethernet CP700 COM460IP COM460IP ext. BMS bus Modbus RTU MK2430 MK800 MK800 MK800 PEM TM MK800 COMTRAXX COMTRAXX PEM ATICS-4-XXXA-DIO ATICS U2 U M I3 KNX/LON U3 BMS bus BMS bus BMS bus BMS bus BMS bus ATICS-2-XXA-ISO ATICS U2 U M I3 Digital In/Out 26 ProfiBus-DP Digital In/Out Modbus RTU U3 T IL RISO

27 COM460IP BMS-Ethernet-Gateway that is used to convert data from the Bender-BMS bus into TCP/IP protocols. COM462RTU The BMS-Modbus/RTU gateway COM462RTU contains a Modbus/RTU slave that converts BMS data for a Modbus master. MK800 Universal alarm indicator and test combination for optical and acoustic signalling of alarm messages from BMS capable Bender monitoring systems. MK2430 Universal alarm indicator and test combination for optical and acoustic signalling of alarm messages from BMS capable Bender monitoring systems. CP700 Condition Monitor for Bender BMS devices and universal measuring devices. 27

28 IT systems used worldwide For all IT systems (unearthed systems) the standard IEC : Protection for Safety - Protection against electric shock applies. According to chapter an Insulation Monitoring Device (IMD) shall be provided to indicate a first insulation fault by an audible and/or visual signal in all cases where an IT system is used for reasons of continuity of supply. Additionally it is recommended that the first fault should be eliminated with the shortest practicable delay. In practice this can be realized e.g by an Insulation Fault Location Systems (IFLS) according to IEC :2009. Area of application Application field General Electrical Installations Typical device Standards and regulations Main Circuits iso685,irdh275, IRDH375, IRDH575, EDS460, EDS3090 IEC :2005, modified -Low-voltage electrical installations Part 4-4: Protection for safety Protection against electric shock, EN 5078:997 Electronic equipment for use in power installations, IEC 6203:2003 Electronic equipment for use in power installations, IEC 6800 series Adjustable speed electrical power drive systems Auxiliary and (Control circuits) IEC :20/A:202 (Clause 557), IR420, IR425, iso685, EDS46, HD :203 Low-voltage electrical installations EDS309 Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits Verification iso685, IRDH275,IRDH375, IRDH575 IEC : ,Low voltage electrical installations verification, IEC :2005, modified Low-voltage electrical installations Part 4-4: Protection for safety Protection against electric shock Energy and Utilities Auxiliary circuits IR420, IR423, IR425, iso685 HD :203 Low-voltage electrical installations Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits Wind turbines IR425, iso685, IRDH575, EDS460 IEC 6400-: A: 200 Wind turbines Part : Design requirements, IEC :2006 Wind turbines Part 2: Design requirements for small wind turbines Photovoltaic isopv, isopv425, isopv685, EDS460, EDS3096PV IEC : Part 7-72: Requirements for special installations or locations - Solar photovoltaic (PV) power supply Renewable Energies Resistance welding IEC 6235-:2008); Resistance welding equipment Part : Safety requirements for design, manufacture and installation (Production) Machinery, Cranes iso685, IRDH275, IRDH375, IRDH575, EDS460, EDS3090, isolr275, iso685pfr IEC : Safety of machinery Electrical equipment of machines Part : General requirements, IEC : Safety of machinery Electrical equipment of machines Part 32: Requirements for hoisting machines, IEC :2009, modified Safety of machinery Electrical equipment of machines Part 33: Requirements for semiconductor fabrication equipment Medical applications Group 2 locations isomed427p, 07TD47, IR426- IEC :2002- Electrical installations of buildings D47, EDS46 Part 7-70: Requirements for special installations or locations Medical locations Data Center Power Supplies isorw425 ETSI EN V.. (203-0) Environmental Engineering (EE); Earthing and bonding of 400 VDC data and telecom (ICT) equipment Electric vehicle IR , IR , IR , IR , iso65c ISO6469 Charging isoev425, IR55-320, IR IEC :204 Electric vehicle conductive charging system Part 23: DC electric vehicle charging station Manufacturing E-Mobility Ships Oil, Gas, Mining, Ships Offshore 28 IEC series Electrical installations in ships. IEC series Mobile and fixed offshore units electrical installations Fixed installations IR25, IR470, IRDH265, IRDH365, IRDH275, IRDH575, EDS460 EN 5022-:20 + A:20 Railway applications Fixed installations Electrical safety, earthing and the return circuit Part : Protective provisions against electric shock, EN :200 Railway applications Fixed installations Electrical safety, earthing and the return circuit Part 2: Provisions against the effects of stray currents caused by d.c. traction systems, CLC/TS 50562:20 Railway applications Fixed installations Process, measures and demonstration of safety for electric traction systems Rolling stock isorw685, isorw425 EN 5055:2007 Railway applications Electronic equipment used on rolling stock, EN 5053:204 Railway applications Rolling stock Protective provisions relating to electrical hazards Railway IMD, IFLS iso685, IRDH275, IRDH375, IRDH575, EDS460, EDS3090 Iso685, IRDH275, IRDH375, IRDH575, EDS460, EDS46, EDS3090 Electrical safety in low voltage distribution systems up IMD s, IRDH575, EDS460, to 000 V a.c. and 500 V EDS46, EDS50, EDS5, d.c. Equipment for testing, EDS3090, EDS309 measuring or monitoring of protective measures IEC : Corrigendum Part 8: Insulation monitoring devices for IT systems, IEC :2009 Part 9: Equipment for insulation fault location in IT systems IEC, :204 Part 5: Functional safety requirements for insulation monitoring devices in IT systems

29 Support at all stages All-round service for your installation: Remote, by phone, on-site S o on c ti vices f de g & Project scheduling Ma int ena nce tion Installa ars for min Regular se to proaches p a d e t n user-orie solutions plementation dards al im practic e of the latest stan dg or a knowle ruenberg G e tr n e c ing In the train you. ar e location n m m o &C From planning to modernisation Our know-how and our expertise is at your disposal in all project phases. Furthermore, our first-class service ensures you the maximum safety for your electrical installations. The service we offer range from telephone support through repairs to on-site service with state-of-the-art measuring devices and professional employees. Convincing benefits: n High availability of your installation by responding faster to fault messages n Automatic control, analysis, correction, readjustments/updates are possible n Competent assistance on changing settings and with updates n Regular checking of your installations/power quality/monitoring devices n Significant cost reduction by reduced downtimes and shorter service times o i t a s i n r e Operation Many service activities, fault clearance, but also analysis and inspections, can be carried out by remote maintenance no technician needs to be on-site, saving you time and money. M od & iss io io at er nin Op n Competent service for maximum safety and high availability of your installation Expa nsio n& n ele Expansion & M ode rni sa tio ning & Concept Plan &M na te ain nc 29

30 Bender your contact for electrical safety Product overview Product overview Residual current monitoring Power Quality AC, pulsed DC and AC/DC sensitive residual current monitors RCM, RCMA, RCMB Electronic measuring and monitoring relays Multi-channel, AC, pulsed DC and AC/DC sensitive residual current monitoring systems RCMS Product overview ISOMETER Insulation monitoring devices ISOSCAN Insulation fault location systems EDS 30

31 3

32 Distributed in Australia exclusively by: Captech Pty Ltd 3/40 Edina Road Ferntree Gully, VIC 356 Ph: E: