K AS-Interface. K Test input

Transcription

1 U RL.-/... Reflection light beam switch with polarisation filter RL.-/... with terminal compartment K Detection range up to 8 m, optional 4 m K Compact construction K Light/dark switch RL--ASI/3 K Sensitivity adjuster and light-/dark switch RLK-/6 RLK-/3/6 RL-/3/47/6 RL-/3/49/6 RL-/47/6 RL-/49/6 K Pre-fault indication and output RLK-/6 RLK-/3/6 RL-/3/47/6 RL-/3/49/6 RL-/47/6 RL-/49/6 K AS-Interface RL--ASI/3 K Test input RLK-/6 RLK-/3/6 RL-/3/47/6 RL-/3/49/6 RL-/47/6 RL-/49/6 For suitable cable sockets, reflectors and mounting aids refer to chapter "accessories". Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet

2 Technical Data RL.-/... Ordering code Effective detection range Threshold detection range 4 m (with C0-2 reflector) 8 m (with C0-2 reflector) Reflector distance Light type Red, alternating light Light source LED Angle of divergence approx. 2 Diameter of the light spot approx. 0 at a distance of 400 approx. at a distance of 0 m Ambient light limit Lux Standard conformity EN Approvals CE USA UL Kanada CSA Function display LED green, lights up when light beam is free\flashes when falling short of the stability control Controls sensitivity adjuster Controls Light/dark switch Operating voltage via AS-i network V DC V AC/DC Ripple 0 % No-load supply current 40 ma Power consumption 3 VA Signal output 2 pnp antivalent, short-circuit proof, protected against reverse polarity npn, pnp synchronised-switching, short-circuit proof, protected against reverse polarity relay, alternator AS-Interface Switching type Light/dark ON, switchable light/dark switching Switching voltage max. 0 V AC 30 V DC Switching current max. 2 A max. 200 ma Switching frequency Hz 0 Hz 0 Hz (max. 00 Hz with 3 slaves) Response time 2 ms Output of the pre-fault indication pnp Data bit D Test input Emitter deactivation Data bit D3 Ambient temperature C Storage temperature C Protection degree IP6 Connection type terminal compartment Housing Terluran GV Light exit Glass Mass 00 g 90 g RL-/47/6 RL-/49/6 RLK-/6 RLK-/3/6 RL-/3/47/6 RL-/3/49/6 RL--AS-I RL--AS-I/3 Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet 2

3 RL.-/... Diagrams Characteristic response curve RL(K) Characteristic response curve RL(K)/3 Offset Y [mm] H8 Distance X [m] x C0-2 H60 H60 F2000 y Offset Y [mm] x y H8 C0-2 H60 H60 F2000 Distance X [m] Relative received light strength Reflector type: H8 (8 x 8) 9.0 m RL(K) C0_2 (ø = 84 mm) 8. m H60 (6 x 4) 7.0 m F2000 (Foil, 0 x 0) 4.0 m H60 (6 x 8 mm) 3.4 m Stability control > 3 00 Stability control Stability control < 3 H8 C0-2 H60 H60 F x Distance X [m] 3 Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet

4 Dimensions and Electrical Connection RL.-/... Dimensions Dispaly LED Dispaly LED Light/dark switch Sensitivity adjuster Emitter Receiver PG 9 Electrical Connection Test /47 /49 AS-i Test (+) (-) 2 Option: ~/+UB ~/0 V RLK 3 4 NO NC 6 C = Light ON, = Dark ON Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet 4

5 RL.-/... AS-Interface Parameters Slave profile: IO code =, ID code = F Parameter bit Bit Type device function Meaning at Host level P0 parameter none none P parameter inversion of D0 = light on (D0 = with receiver lit)(light-dark switching) 0 = dark on (D0 = 0 with receiver lit) P2 parameter none none P3 parameter none none Data bit Bit Type device function Meaning at Host level D0 input sensor function = receiver lit (at P = ) 0 = receiver not lit (at P = ) 0 = receiver lit (at P = 0) = receiver not lit (at P = 0) D input warning = sufficient stability control (> 3-fold) or receiver not lit (delay time until setting to : < s); 0 = insufficient stability control (delay time until setting to 0: < 2 s) D2 input functional readiness = device ready for operation 0 = device not ready for operation D3 output test function none Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet

6 RL.-/... Pepperl+Fuchs Group Tel.: Germany (06 2) USA (330) 4 3 Singapore Internet 6