HITEK POWER IP100 SERIES
|
|
|
- Kerrie Lynch
- 5 years ago
- Views:
Transcription
1 ION PUMP POWER SUPPLY The HiTek Power IP100 Series is a range of high voltage power supplies designed to drive a vacuum chamber ion pump where a vacuum in the region of 1x10E-11 Torr is required. The IP100 Series is also suitable for use in mass spectrometers, scanning electron microscopes and high integrity vacuum systems. PRODUCT HIGHLIGHTS 115 W Output Power 90 V to 265 V AC Operation Positive or Negative polarity to order Compact size Lightweight Protection against output short circuit Current monitor Interlock EU RoHS compliant to 2002/95/EC 2018 Advanced Energy Industries, Inc.
2 ELECTRICAL SPECIFICATIONS Output Power Output Voltage Output Current Input Voltage Input Current Polarity Output Ripple Operation Remote Enable 115 W output at 240 V input 5 kv or 7 kv depending on model 80 ma max 90 V to 265 V AC 2 A max Operating Temperature 10 C to 40 C Altitude Humidity 80% Assembly Protection Safety RoHS Current Monitors Positive or negative to order Less than 30 V peak to peak A mains ON/OFF switch, ENABLED indicator lamp and fuse are provided on the front panel. HV Enable and a Current Monitor are provided via a 9-way D-type connector situated on the rear panel. A current monitor is also provided via 4mm banana sockets. The presence of a 24 V supply fed remotely enables the supply. Sea level to 2000 metres (6500 feet) The unit incorporates an air insulated HV assembly to achieve a total weight of less than 1.6 kg (3.5 lb). Robust design ensures that the power supply is immune to output short circuit. An interlock is provided which disables the power supply when the cover is removed. The Series IP100 meets the requirements of the Low Voltage Directive (LVD) 2006/95/EC by complying with BS EN61010 when it is installed as a component part of compliant equipment. It is CE marked accordingly. The Series IP100 meets the requirements of EU Directive 2002/95/EC on the Restriction of use of Certain Hazardous Substances in electrical and electronic equipment (RoHS). Fiber optic transmitter 4mm sockets or 9-way D-type (pins 3 or 4) A series of light pulses, where the frequency is directly proportional to the load current over the range 1μA to 2 ma. 1 ma load gives 30 khz. (Frequency (Hz) = load current x 30E6) ±5%.) A voltage directly proportional to the load current over the range 1 μa to 2 ma. (1 ma load = 4.7V monitor ±5%.) 2 advanced-energy.com
3 MECHANICAL SPECIFICATIONS Dimensions Weight See outline drawing 1.6 kg (3.5 lb) advanced-energy.com 3
4 INTERFACE Mains HV Output Current Monitor IEC320 mains receptable FISCHER 105 series 4mm isolated sockets HV Enable/Current Monitor via a 9-way D-type connector: GROUND 1 6 NO CONNECTION 2 7 MONITOR GND 3 8 MONITOR OUTPUT 4 9 ENABLE 24V - Ve 5 ENABLE 24V + Ve NO CONNECTION NO CONNECTION NO CONNECTION 4 advanced-energy.com
5 ORDERING INFORMATION Model Output Voltage Output Current IP100/ kv 80 ma IP100/ kv 80 ma 1 Please add suffix P (Positive) or N (negative) to the model number for the required polarity. eg: part number for a 7kV positive unit: IP100/702P. For voltages not listed above, please contact our sales team. advanced-energy.com 5
6 ABOUT ADVANCED ENERGY Since 1981, Advanced Energy (AE) has perfected how power performs for its customers. For both end users and OEMs, AE s comprehensive portfolio of standard and custom high voltage components precisely match system specifications to deliver unparalleled energy, quality, and performance. Through close customer collaboration, design expertise, application insight, and world-class support, AE creates successful partnerships and enables customers to push the boundaries of innovation and stay ahead of evolving market needs. PRECISION POWER PERFORMANCE CAUTION: High Voltage Read and understand all documentation before you install, operate, or maintain Advanced Energy high voltage power supplies. Follow all safety instructions and precautions to protect against property damage and serious or possibly fatal bodily injury. Never defeat safety interlocks or grounds. For international contact information, visit advanced-energy.com. HVSales@aei.com Specifications are subject to change without notice. Not responsible for errors or omissions Advanced Energy Industries, Inc. All rights reserved. Advanced Energy, AE, and HiTek Power are U.S. trademarks of Advanced Energy Industries, Inc. ENG-HV-IP
HITEK POWER PSM10 SERIES
HITEK POWER PSM10 SERIES PRECISION SCIENTIFIC POWER SUPPLY MODULES The HiTek Power PSM10 series is a range of versatile high voltage component power supply modules equally suited to both laboratory and
HITEK POWER OL1K SERIES
HIGH VOLTAGE POWER SUPPLY The HiTek Power OL1K Series range of single output high voltage power supplies meets the exacting requirements found in electron and ion beam systems, ion implantation and X-ray
HITEK POWER XR KW X-RAY POWER SUPPLY MODULE
HITEK POWER XR1000 1 KW X-RAY POWER SUPPLY MODULE The HiTek Power XR1000 series is a component power supply for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers,
HITEK POWER OL600W SERIES
600 W HIGH VOLTAGE POWER SUPPLIES The HiTek Power OL600W series range of single output high voltage power supplies meets the exacting requirements found in electron beam, ion beam, and x-ray systems, as
HITEK POWER OL3000 SERIES
3KW HIGH VOLTAGE POWER SUPPLY The HiTek Power OL3000 series range of single output high voltage power supplies was designed as a component power supply for use in a wide range of diverse applications;
HITEK POWER OLH10K SERIES
10KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLH10K Series is a range of high reliability single output high voltage power supplies designed to meet the rigorous requirements of ion and electron beam
2017 Advanced Energy Industries, Inc. HITEK POWER MH60 SERIES VERSATILE HIGH-VOLTAGE POWER SUPPLY MODULES
2017 Advanced Energy Industries, Inc. HITEK POWER MH60 SERIES VERSATILE HIGH-VOLTAGE POWER SUPPLY MODULES Full range control and monitoring of output voltage and current for OEM equipment Page 2 The MH60
HITEK POWER OLS10KD SERIES
10KW HIGH VOLTAGE POWER SUPPLY The HiTek Power OLS10KD series range of high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages.
HITEK POWER OLS10K SERIES
10 KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLS10K series range of single-output high voltage power supplies meets the exacting requirements found in electron-beam, ion-beam, and x-ray systems, as
ULTRAVOLT HIGH-POWER C SERIES
HIGH VOLTAGE CAP-CHARGING SUPPLY The Ultravolt high-power line of high voltage regulated DC-to-DC converters is an extension of the C series, directly addressing the high power density needs of > 30 W
ULTRAVOLT BIPOLAR HIGH POWER C SERIES
DUAL-OUTPUT HIGH VOLTAGE POWER SUPPLIES The UltraVolt bipolar C series line of regulated DC-to-DC high voltage converters is an extension of the high power C series. Bipolar C series units contain a pair
HITEK POWER EG353 SERIES HIGH-STABILITY 35 KV HIGH VOLTAGE POWER SUPPLIES FOR PRECISION SEM E-BEAM APPLICATIONS
HITEK POWER EG353 SERIES HIGH-STABILITY 35 KV HIGH VOLTAGE POWER SUPPLIES FOR PRECISION SEM E-BEAM APPLICATIONS High-stability 35 kv high voltage power supplies for precision SEM e-beam applications The
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES Medium-voltage rack-mount power supplies Page 2 The MV2000 series high-performance, medium output
ULTRAVOLT 20A AND 25A SERIES
PRECISION HIGH VOLTAGE DC CONVERTERS The UltraVolt 20A and 25A series of regulated DC-to-DC converters provide general-purpose high voltage power for a wide range of applications. PRODUCT HIGHLIGHTS Regulated
ULTRAVOLT XS SERIES EXTRA-SMALL HIGH VOLTAGE BIASING SUPPLIES
EXTRA-SMALL HIGH VOLTAGE BIASING SUPPLIES The UltraVolt XS series of extra-small high voltage power supplies is the smallest regulated DC-to-DC high voltage power supply for applications that require a
HITEK POWER XR KW X-RAY POWER SUPPLY MODULE
HITEK POWER XR1000 1 KW X-RAY POWER SUPPLY MODULE Component power supply for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers, and materials process monitoring applications
HITEK POWER MPM SERIES MINIATURE HIGH VOLTAGE DC-TO-DC CONVERTERS
HITEK POWER MPM SERIES MINIATURE HIGH VOLTAGE DC-TO-DC CONVERTERS The MPM series offers a unique range of low cost, general purpose high voltage DC-to-DC converters. All units are configured for direct
HITEK POWER MSRD SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSRD SERIES MASS SPECTROMETRY POWER SUPPLY MODULES MSRD SERIES The MSRD series consists of high-stability, reversible source modules that perform reliably even under short-circuit or arc conditions.
HITEK POWER MSP SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSP SERIES MASS SPECTROMETRY POWER SUPPLY MODULES The MSP series consists of high stability, unipolar source modules that perform reliably even under short-circuit or arc conditions. They are
Series OLS10KD 10kW HIGH VOLTAGE POWER SUPPLY
DESCRIPTION The Series OLS10KD range of high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages. This is achieved by combining
HITEK POWER MSRZ SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSRZ SERIES MASS SPECTROMETRY POWER SUPPLY MODULES MSRZ SERIES MSRZ series reversible source modules provide a fast reversible output voltage with high stability, low ripple, and excellent
Series OLH10KD 10kW HIGH VOLTAGE POWER SUPPLIES
Series OLH10KD FEATURES 10kW of output power Wide dynamic range with dual supply configuration Output voltages from 60kV to 500kV for high range Output voltages from 6kV to 10kV for low range Robust IGBT
ULTRAVOLT HIGH-POWER C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLY
ULTRAVOLT HIGH-POWER C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLY High voltage cap-charging supplies The high-power line of high voltage regulated DCto-DC converters is an extension of the C series, directly
ULTRAVOLT TF SERIES HIGH VOLTAGE TEST FIXTURES
ULTRAVOLT TF SERIES HIGH VOLTAGE TEST FIXTURES Reduced-size HV test fixture devices The TF series product line supports the need to make accurate measurements of high voltage power supply (HVPS) and HV
TYPICAL APPLICATIONS DRIVERS AMPLIFIERS
The HVA series of DC-to-DC high voltage power supplies operates a precision filter/divider and linear HV switch to produce a high voltage amplifier (HVA). These modules provide a high-resolution, programmable,
ULTRAVOLT -F OPTION RIPPLE STRIPPER OUTPUT FILTERS
ULTRAVOLT -F OPTION RIPPLE STRIPPER OUTPUT FILTERS Reduced ripple for HV power supplies The -F option Ripple Stripper output filter adds additional ripple-reduction circuitry internally to DCto-HV DC high
STA3318 Series StellarMini TM 180 W, Ku-Band Antenna Mount TWTA
STA3318 Series StellarMini TM 180 W, Ku-Band Antenna Mount TWTA The STA3318 range of Ku-Band TWT amplifiers from e2v technologies provide over 150 W of output power in a compact, lightweight, rugged, weatherproof,
ULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES
ULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES DC-DC single-output PCB-mount high voltage modules Page 2 The AA series consists of high voltage, miniature PCBmount, regulated DC-DC converters. Designed
MDX DC 1 kw & 1.5 kw Series. Tight regulation Superior arc control Low stored output energy
MDX DC 1 kw & 1.5 kw Series Tight regulation Superior arc control Low stored output energy Benefits Tight regulation Improved yield Reduced target burn-in time High reliability Tight regulation, superior
ULTRAVOLT C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLIES
ULTRAVOLT C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLIES DC-to-H single-output high voltage capcharging modules The C series of high voltage regulated DC-to-DC converters are designed for fast rise time/charging
ULTRAVOLT A SERIES HIGH VOLTAGE BIASING SUPPLY
ULTRAVOLT A SERIES HIGH VOLTAGE BIASING SUPPLY High voltage biasing supplies The A Series consists of miniature, PCBmount, high voltage, regulated DCDC converters. Designed and built utilizing stateoftheart
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
2017 Advanced Energy Industries, Inc. PEII SERIES LOW-FREQUENCY POWER SUPPLIES 5 TO 60 KW
2017 Advanced Energy Industries, Inc. PEII SERIES LOW-FREQUENCY POWER SUPPLIES 5 TO 60 KW Enhanced arc control with internal load matching for 40 khz reactive sputtering applications Page 2 The PEII power
PS16 SERIES. Features. Multiple Primary Windings: Either 120 VAC or 240 VAC, 50/60 Hz Operation 30 VDC, 36 VDC or 40 VDC Secondary Output Winding Taps
Description The PS unregulated power supplies have been designed to complement ADVANCED Motion Controls servo drives. Model PS is mounted on a base plate for multi-axis applications (mounting space provided
200W 500W, Air Cooled QUBE Fiber Lasers
Technical Specification 200W 500W, Air Cooled QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 4 1.5 POWER DISTRIBUTION 4 1.6
USER MANUAL XLB-2500 Short Arc Xenon Lamp Ballast
USER MANUAL XLB-2500 Short Arc Xenon Lamp Ballast The XLB-2500 Xenon lamp ballast is a very compact power supply designed for OEM applications. The XLB-2500 is ideal for high power applications where economy
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
DXM 300W-1200W X-RAY GENERATOR MODULE REV. AB
PAGE 1 OF 5 Compact & Lightweight Models from 20kV-160kV, 300W, 600W and 1200W Universal Input, Power Factor Corrected Hot Anode or Hot Cathode X-Ray Tube Capable Standard Digital Interfaces:, Ethernet
Analog Servo Drive 25A20DD
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
The MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
Electrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
NI SCXI Specifications
NI SCXI -1127 Specifications 32-Channel Relay Multiplexer/Matrix Input Characteristics This document lists specifications for the NI SCXI-1127 multiplexer/matrix module. All specifications are subject
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
USER MANUAL XLB-650 Short Arc Xenon Lamp Ballast
26 Ward Hill Dr., Bradford, MA 01835 Phone: +1-978-241-8260 Fax: +1-978-241-8262 USER MANUAL XLB-650 Short Arc Xenon Lamp Ballast The XLB-650 Xenon lamp ballast is a very compact power supply designed
External RF Driver. Electrical Driver for AOTF-crystal. Instruction Manual
External RF Driver Electrical Driver for AOTF-crystal Instruction Manual Table of Contents 1 General... 3 2 Compliance... 3 3 Labeling... 4 4 Interface... 5 4.1 Front Panel... 5 4.2 Back Panel... 6 4.2.1
The MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
SCC-CO20 Isolated Current Output Module
USER GUDE SCC-CO0 solated Current Output Module Conventions The SCC-CO0 is an isolated current output module that outputs up to 0 ma. The output current level is proportional to the voltage applied to
Product Specification sheet
INPUT MINIMUM RATED MAXIMUM Input Voltage 90V AC 100 240V AC 264V AC Input Frequency 47 Hz 50 / 60 Hz 63 Hz Input Current * 350mA Inrush Current **
IEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
High precision measurement system for current and voltage IHC-A/B-RM01/03
Measurement Offset-free and low-noise 16 bit data acquisition system ISA-ASIC Internal sample rate 3,500 Hz Communication Standard RS232- or RS485 interface Advantages Direct measurement on the bus bar
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
High Efficiency AC Input 8A 19V Laser Driver
Figure 1. Front View of the Figure 2. Top View of the FEATURES High efficiency: 70% Maximum output current: 8A Wide output voltage: 0V ~ 19V Wide input voltage: 100VAC ~ 240VAC High speed digital modulation:
420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
High-Power Q-Switched Diode-Pumped UV Laser. Q-Series : Q306
High-Power Q-Switched Diode-Pumped UV Laser Q-Series : Q306 www.lumentum.com Data Sheet The high-power Q306 lasers expand the existing Q-Series to provide solutions for demanding applications that require
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
REDUNDANT DC 200W POWER SUPPLY. Technical Specifications TD-DC-200W-12V
REDUNDANT DC 200W Technical Specifications Model Number : Efficiency : >92% Minimum Maximum DC Input Voltage -36V -72V Maximum Output Power 200W Output Minimum Maximum Load Load 12V 0A 16.7A 5V - - 3.3V
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
Packaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
Electrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
FR10DxxR. DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR10DxxR DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-10 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
FR10DxxR. DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR10DxxR DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-10 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
REDUNDANT AC 300W POWER SUPPLY. Technical Specifications TD-AC-300W-MAX
REDUNDANT AC 300W Technical Specifications Model Number : Efficiency : >92% Power Factor : >0.99 Minimum Maximum AC Input Voltage 90V 265V Frequency 50Hz 60Hz Maximum Output Power 300W Output Minimum Maximum
Features. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
LZS-A500-3 POWER SUPPLY Installation, Operation, and Maintenance Manual. IM-LZSA500-3 January 2008 Revision H
LZS-A500-3 POWER SUPPLY Installation, Operation, and Maintenance Manual IM-LZSA500-3 January 2008 Revision H Table of Contents LZS-A500-3 Power Supply 1) Safety and Recommended Practices 2 1.1 General
F SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
Proven Reliability F SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 200V to 8kV at 10W PRODUCT SELECTION TABLE MODEL VOLTAGE* 2 CURRENT* 1 Output Voltage (%) 140t 120 100 80 60 40 20 PRODUCT DESCRIPTION
FR50MxxR. DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.
KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency up to 94% Low standby consumption (
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
High Efficiency AC Input 12A 12V Laser Driver
Figure. Front View of the Figure 2. Top View of the FEATURES High efficiency: 70 % Maximum output current: 2A Wide output voltage: 0V ~ 2V Wide input voltage: 00VAC ~ 240VAC High speed digital modulation:
OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
Installation instructions
Installation instructions T70RX-03AIB, T70RX-03AWB, T70TX-02TTB, T70TX-03STB, T70TX-06TTB LANGUAGE: English (original) IM-T70-RX001-A01-EN CONTENTS Chapter 1: CUSTOMER INFORMATION 3 Chapter 2: PRODUCT
Room Temperature Controllers. for heating and cooling systems
3 041 RCU10 RCU10.1 Room Temperature Controllers for heating and cooling systems RCU10... Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Operating modes:
A SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
Proven Reliability A SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 6000V @ 1.0 and 1.5 Watts Extremely Low Profile: 0.25 inches and volume of < 0.100 cubic inches *5 NOW UL RECOGNIZED PRODUCT
Narrow Linewidth Micro- Integrable Tunable Laser Assembly u ITLA
Narrow Linewidth Micro- Integrable Tunable Laser Assembly 6205-u ITLA www.lumentum.com Data Sheet Lumentum narrow linewidth tunable lasers are a key component in today s agile transmission modules that
1 Model 3153 Automatic Insulation Voltage Withstand Testing Voltage Control from a PC Full Remote Control All test parameters can be controlled by RS-232C or GP-IB, including test voltage, cut-off current,
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
TABLE OF CONTENTS LIST OF FIGURES
7/2/2000 N472 User's Manual TABLE OF CONTENTS TABLE OF CONTENTS... i LIST OF FIGURES... i 1. DESCRIPTION... 1 1.1. FUNCTIONAL DESCRIPTION... 1 2. SPECIFICATIONS...2 2.1. EXTERNAL COMPONENTS... 2 2.2. INTERNAL
Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
Low Noise Variable Gain Low Frequency Voltage Amplifier
Measurement Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled,
Sorensen HPD Series 300 W 5 20 A. 300 Watt DC Power Supply with Near-Linear Performance V. with automatic crossover and mode indication
Sorensen HPD Series 300 W 300 Watt DC Power Supply with Near-Linear Performance 15 60 V with automatic crossover and mode indication 5 20 A 115 230 The Sorensen High Power Density (HPD) Series provides
Advantages. Applications
LDD MLB High Mercury Power Lamp CW Laser Power Diode Supplies Drivers The MLB series Mercury lamp ballasts are designed for the OEM customer. MLB power supplies provide a precise constant power output
Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (