PS16 SERIES. Features. Multiple Primary Windings: Either 120 VAC or 240 VAC, 50/60 Hz Operation 30 VDC, 36 VDC or 40 VDC Secondary Output Winding Taps

Transcription

1 Description The PS unregulated power supplies have been designed to complement ADVANCED Motion Controls servo drives. Model PS is mounted on a base plate for multi-axis applications (mounting space provided on base plate for up to drives). Model PS-L is mounted on an L -shaped bracket for single-axis applications. These unregulated DC power sources are an excellent solution for most applications as ADVANCED Motion Controls servo drives compensate for power supply output variations and AC ripple components. PSx0,,40,0,,0 PSx0,,40,0,,0-L PS Series power supplies are designed to provide the best cost-per-watt value. They have multiple windings for either (PSL) or (PSH) 0/0 Hz operation. These power supplies incorporate either a 0V, V or a 40V output transformer. The 0V and 40V transformers have four identical secondary windings and the V transformers have two identical secondary windings. These windings can be connected in series or in parallel for different output voltages and currents. PSx0,0 PSx0,0-L Ordering Note: For the L-Bracket option, add a -L to the end of each part number (e.g. PSL40-L) PSL0 PSL0-L Note: AC Power Cord included only with input models Features Multiple Primary Windings: Either or, 0/0 Hz Operation 0 VDC, VDC or 40 VDC Secondary Output Winding Taps Agency Approvals Isolation Transformer on All Power Supply Models Except the PSL0 and PSL0-L Small Size, Low Cost, Ease of Use Compliant with European CE for both the Class A EMC Directive 004/0/EC on Electromagnetic Compatibility (specifically EN :00 and EN 000--:00) and LVD requirements of directive 00//EC (specifically EN 004- :00), a low voltage directive to protect users from electrical shock. Model Number DC Output Voltage Output Current Output Power Isolation RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment. Single Phase Input Single Phase Input PSL0 0 VDC A 00 W YES PSL VDC A 00 W YES PSL40 40 VDC 0 A 00 W YES PSL0 0 VDC A 00 W YES PSL VDC A 00 W YES PSL0 0 VDC 0 A 00 W YES PSL0 0 VDC A 00 W YES PSL0 0 VDC A 00 W YES PSL0 0 VDC A 0 W NO PSH0 0 VDC A 00 W YES PSH VDC A 00 W YES PSH40 40 VDC 0 A 00 W YES PSH0 0 VDC A 00 W YES PSH VDC A 00 W YES PSH0 0 VDC 0 A 00 W YES PSH0 0 VDC A 00 W YES PSH0 0 VDC A 00 W YES Page of

2 SPECIFICATIONS Power Specifications ( Single Phase ) Description Units PSL0 PSL PSL40 PSL0 PSL PSL0 PSL0 PSL0 PSL0 AC Supply Voltage Input VAC 0 AC Supply Input Frequency Hz 0-0 Hz AC Supply Input Phases - Single Phase Output Voltage VDC Current Output A 0 0 Power Specifications ( Single Phase ) Description Units PSH0 PSH PSH40 PSH0 PSH PSH0 PSH0 PSH0 AC Supply Voltage Input VAC 40 AC Supply Input Frequency Hz 0-0 Hz AC Supply Input Phases - Single Phase Output Voltage VDC Current Output A 0 0 Mechanical Specifications Description Units PS PS-L AC Input Connector - AC Cord Supplied DC Output Connector - Screw Terminals Flying Leads Size (H x W x D) mm (in) 0. x. x.4 (.00 x 0.0 x.00) 4 x.4 x 44. (0.00 x 4.4 x.0) Weight kg (lbs). (). () Notes. AC Cord included with input models only.. Worst case depth dimension. Depth varies with model number. See mounting dimensions for additional details. BLOCK DIAGRAMS TRANSFORMER PRIMARY WINDING TRANSFORMER SECONDARY WINDING 0 A Slow Blow 4 A Slow Blow 4 0V and 40V Transformers *Contact factory prior to rewiring transformer primary or secondary V Transformers WIRING FOR 0V AND 40V TRANSFORMERS 0/0 Hz AC Input or 0/0 Hz 4 T 0 DB C PSx40 PSx VDC 0A or 0 VDC A Wiring C = 4,000 00V PSx0 PSx0 0 0 VDC 0A or 0 VDC A Wiring C = 4,000 00V PSx0 PSx0 0 0 VDC A or 0 VDC A Wiring C =,000 00V WIRING FOR V TRANSFORMERS 0/0 Hz AC Input or 0/0 Hz 4 T DB C PSx VDC A C = 4,000 00V PSx VDC A C = 4,000 00V WIRING FOR PSL0 DB C = V DC OUT 0 VDC A Page of

3 MOUNTING DIMENSIONS Mounting Dimensions for PS Page of

4 Mounting Dimensions for PS-L Page 4 of

5 CUSTOMIZATION INFORMATION ADVANCED Motion Controls products are available in many configurations. All models listed in the selection tables of the website are readily available, standard product offerings. ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quickturn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for further information and details. Examples of Customized Products Optimized Footprint Tailored Project File Private Label Software Silkscreen Branding OEM Specified Connectors Optimized Base Plate No Outer Case Increased Current Limits Increased Current Resolution Increased Voltage Range Increased Temperature Range Conformal Coating Custom Control Interface Multi-Axis Configurations Integrated System I/O Reduced Profile Size and Weight Available Accessories ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system. Visit to see which accessories will assist with your application design and implementation. Shunt Regulators Filter Cards To Motor Drive(s) All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document. Page of