Online data sheet FLOWSIC600 GAS FLOW METERS

Transcription

1 Online data sheet FLOWSI600

2 F H I J K L M N O P Q R S T US Ordering information Type FLOWSI600 Part no. On request In accordance with rticle 2 (4), this product does not fall within the scope of RoHS directive 2011/65/U and is also not designed for use in products which fall within the scope of this directive. You can find additional information in the product information. The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications. Our regional sales organization will help you to select the optimum device configuration. Other models and accessories Product description The FLOWSI600 measurement device is an ultrasonic gas flow meter and sets the standard in its market segment for custody transfer of natural gas as well as steam flow measurement. The visually technical design demonstrates that it is geared to the tough industry conditions. The compact design with integrated cable routing means that the measuring system is rugged, insensitive to interference, low-maintenance, and has long-term stability. The FLOWSI600 features extensive diagnostics options to allow detection of malfunctions even before the measurement is affected. Versions with 2, 4, 4 + 1, or measuring paths enable a variety of process applications, including custody transfer measurements. t a glance Highly efficient ultrasonic transducer - up to gas temperatures of 280 and pressures up to 450 bar irect path layout Intelligent self-diagnostics ompact, robust design Integrated log book and data logger Large measuring range 1:120 idirectional measurement Low power consumption: <1 W Your benefits Long-term stability, reliable measurement Low maintenance due to intelligent self-diagnostics Virtually immune to pressure regulator noise Ultrasonic transducers can be exchanged under operating pressure Wide application range 2 ULTRSONI GS FLOW MSURING VIS SIK Online data sheet :28:29 Subject to change without notice

3 Fields of application ustody transfer applications (natural gas, N 2, O 2, air, ethylene) Onshore and offshore applications Steam flow measurement Underground gas storage facilities (bidirectional measurement possible) ryogenic gas applications down to 194 lso for process gases For gas with high H 2 S component such as sour gas or biogas etailed technical data System Measured values Volumetric flow, a. c., volume a. c., gas velocity, sound velocity Number of measuring paths 2, 4, 4+1, 4+4 Measurement principle Measuring medium Measuring ranges Repeatability ccuracy Volumetric flow, a. c. Ultrasonic transit time difference measurement Natural gas, N 2, O 2, air, 2 H 4, steam, process gases m³/h / 1, ,000 m³/h Measuring ranges depend on nominal pipe size < 0.1 % of the measured value rror limits 2-path version 1 : ± 1 % 4-path version 2 : ± 0.5 % ry calibrated 4-path version 2 : ± 0.2 % fter flow calibration and adjustment with constant factor 4-path version 2 : ± 0.1 % fter flow calibration and adjustment with polynomial or piecewise correction 1 In the range Q t... Q max with straight 20/3 inlet/outlet section or with 10/3 flow conditioner 2 In the range Q t... Q max with undisturbed 10/3 inlet/outlet section or with 5/3 flow onditioner iagnostics functions Gas temperature Operating pressure Nominal pipe size mbient temperature Integrated device diagnosis and extended diagnosis via MPFLOW600 M software On request: bar (g) bar (g) On request: 450 bar (g) (N N 1200) TX, S: Ix: Optional Ix: :28:29 Online data sheet Subject to change without notice ULTRSONI GS FLOW MSURING VIS SIK 3

4 F H I J K L M N O P Q R S T Storage temperature mbient humidity 95 % Relative humidity onformities G-Report No. 9 PI 21.1 OIML 11:2013 OIML R 137-1:2006 ISO S 7965 Pattern approval: MI, PT, NMi, Measurement anada, GOST... x-approvals lectrical safety nclosure rating nalog outputs igital outputs Modbus HRT Operation imensions (W x H x ) Weight Material in contact with media lectrical connection Measuring ranges Ix TX N/ (US/) Type of fieldbus integration Voltage Power consumption Gb/Ga x d e ib [ia Ga] II T4 Gb/Ga x d e ib [ia Ga] II T4 Ultrasonic transducers intrinsically safe II 1/2G x de ib [ia] II T4 II 1/2G x de ib [ia] II T4 Ultrasonic transducers intrinsically safe lass I, ivision 1, Groups,, T4 lass I, ivision 2, Groups,,, T4 lass I, ivision 1, Group T4 lass I, ivision 2, Group T4 Ultrasonic transducers intrinsically safe IP65 / IP66 / IP67 1 output: m, 200 Ω ctive/passive, electrically isolated 3 outputs: + 30 V, 10 m Passive, electrically isolated, Open ollector or according to NMUR (N 50227), f max = 6 khz (scalable) SII RS-485 (2x) RTU RS-485 (2x) Via meter display and software MPFLOW600 See dimensional drawings epending on device version Low temperature carbon steel, stainless steel, duplex steel V With active current output: V 1 W Measuring ranges Nominal size Flow rate Max. velocity * m³/h Ft³/h m/s Ft/s Min. Max. Min Max. N 50 2'' , ULTRSONI GS FLOW MSURING VIS SIK Online data sheet :28:29 Subject to change without notice

5 Nominal size Flow rate Max. velocity * m³/h Ft³/h m/s Ft/s Min. Max. Min Max. N 80 3'' 8 1, , N 100 4'' 13 1, , N 150 6'' 20 3, , N 200 8'' 32 4,500 1, , N '' 50 7,000 1, , N '' 65 8,000 2, , N '' 80 10,000 2, , N '' ,000 4, , N '' ,000 4, , N '' ,000 7, , N '' ,000 9, , N '' ,000 11,300 1,131, N '' ,000 12,700 1,272, N '' ,000 14,100 1,414, N '' ,000 14,100 1,590, N '' ,000 14,100 1,767, N '' ,000 18,550 2,050, N '' ,000 23,000 2,333, N '' ,000 23,000 2,580, N '' ,000 23,000 2,828, N '' 1,300 85,000 46,000 3,004, N '' 1,400 90,000 49,500 3,181, N '' 1,500 95,000 53,050 3,358, N '' 1, ,000 56,600 3,535, * When using installation configuration 2 (with flow conditioner) the maximum allowed gas velocity in the pipe is limited to 40 m/ s (131 ft/s). imensional drawings (imensions in mm (inch)) Versions with nominal sizes from 3 up to and including 14 (cast) 206 (8.11) :28:29 Online data sheet Subject to change without notice ULTRSONI GS FLOW MSURING VIS SIK 5

6 F Versions for nominal sizes from 16 (forged) Longitudinal section for nominal widths up to 48 H I J K L M N O P Q R S T 10 imensions imensions Nominal onnection pipe size flange Standard F* Weight * Length () Hight () ** Flange diameter () Width of measuring section () [kg] [mm] [mm] [mm] [mm] [mm] 3 l. 150 NSI l l N 80 PN 16 IN PN 63 IN PN 100 IN l. 150 NSI l l N 100 PN 16 IN PN 63 IN PN 100 IN l. 150 NSI l l N 150 PN 16 IN PN 63 IN PN 100 IN l. 150 NSI Internal diameter () 6 ULTRSONI GS FLOW MSURING VIS SIK Online data sheet :28:29 Subject to change without notice

7 Nominal pipe size N 200 onnection flange Standard Weight * Length () Hight () ** Flange diameter () Width of measuring section () [kg] [mm] [mm] [mm] [mm] [mm] l l PN 16 IN PN 63 IN PN 100 IN l. 150 NSI l l N 250 PN 16 IN PN 63 IN PN 100 IN l. 150 NSI l l N 300 PN 16 IN PN 63 IN PN 100 IN l. 150 NSI , l l N 350 PN 16 IN PN 63 IN PN 100 IN Fore al meters 16 an installation length of 3 is optionally available 16 l. 150 NSI l l N 400 PN 16 IN PN 63 IN l. 150 NSI l l , N 450 PN 16 ata on request 20 l. 150 NSI l l , ,500 1, N 500 PN 16 IN l. 150 ata on request l. 300 l. 600 N 550 PN l. 150 NSI , l , l , ,100 1,200 1,040 1,040 N 600 PN 16 IN , l. 150 SM 1,475 1, l ,825 1, Internal diameter () :28:29 Online data sheet Subject to change without notice ULTRSONI GS FLOW MSURING VIS SIK 7

8 F H I J K L M N O P Q R S T Nominal pipe size onnection flange Standard Weight * Length () Hight () ** Flange diameter () Width of measuring section () [kg] [mm] [mm] [mm] [mm] [mm] l ,100 1,038 1,016 2,500 1,250 1,073 1,086 N 650 PN16 ata on request 28 l. 150 SM 1,950 1,100 1, l ,225 1,080 1,035 l ,450 1,100 1,073 3,000 1,300 1,150 1,169 N 700 PN16 ata on request 30 l. 150 SM 2,195 1,150 1, l ,545 1,135 1,092 l ,820 1,154 1,130 3,350 1,350 1,205 1,232 N 750 PN16 ata on request 32 l. 150 SM 2,485 1,200 1,145 1,061 l ,835 1,190 1,150 l ,110 1,212 1,194 3,800 1,400 1,272 1,315 N 800 PN 16 ata on request 34 l. 150 ata on request l. 300 l. 600 N 850 PN l. 150 SM 3,125 1,250 1,250 1,169 l ,525 1,300 1,270 l ,850 1,323 1,315 5,225 1,450 1,396 1,461 N 900 PN 16 ata on request 38 l. 150 SM 3,800 1,300 1,310 1,238 l ,725 1,275 1,169 l ,300 1,325 1,270 ata on request 1,421 1,461 N 950 PN 16 ata on request 40 l. 150 SM 3,825 1,350 1,359 1,289 l ,125 1,334 1,239 l ,675 1,375 1,321 ata on request 1,470 1,512 N 1000 PN 16 ata on request 42 l. 150 SM 4,675 1,450 1,415 1,346 l ,650 1,386 1,289 l ,450 1,444 1,404 ata on request 1,523 1,562 N 1050 PN 16 ata on request 44 l. 150 ata on request l. 300 l. 600 N 1100 PN l. 150 l. 300 l. 600 ata on request N 1150 PN l. 150 SM 6,400 1,600 1,574 1,511 l ,475 1,552 1,467 l ,850 1,615 1, , , , , ,416 1,080 Internal diameter () 8 ULTRSONI GS FLOW MSURING VIS SIK Online data sheet :28:29 Subject to change without notice

9 Nominal pipe size onnection flange Standard Weight * Length () Hight () ** Flange diameter () Width of measuring section () [kg] [mm] [mm] [mm] [mm] [mm] 12,100 1,900 1,711 1,785 N 1200 PN 16 ata on request * evices with single SPU; devices with double SPU: weight + 7 kg ** Optional neck extension: mm Internal diameter () Instruction for installation FLOWSI600 integration into the pipeline for unidirectional use in configuration 1 () and configuration 2 () 10 N 3 N N N 2 N 5 N 3 N 3 N N 1 FLOWSI600 2 Temperature measuring point 3 Flow conditioner :28:29 Online data sheet Subject to change without notice ULTRSONI GS FLOW MSURING VIS SIK 9

10 F H I J K L M N O P Q R S T FLOWSI600 integration into the pipeline for bidirectional use in configuration 1 () and configuration 2 () 10 N 5 N 1 FLOWSI600 2 Temperature measuring point 3 Flow conditioner N N 10 N 5 N 2 N 3 N 3 N 2 N N N 10 ULTRSONI GS FLOW MSURING VIS SIK Online data sheet :28:29 N Subject to change without notice

11 Online data sheet SIK at a glance SIK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in urope, sia and North merica, system solutions are tested and optimized in accordance with customer specifications. ll this makes us a reliable supplier and development partner. omprehensive services complete our offering: SIK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is Sensor Intelligence. Worldwide presence: ontacts and other locations SIK G Waldkirch Germany