Valid for serial no xxx -xxxx, 011 -xxx -xxxx, 220 -xxx -xxxx and 417 -xxx -xxxx
|
|
- Theodora Kerry Chapman
- 6 years ago
- Views:
Transcription
1 Spare parts list Valid for serial no xxx -xxxx, 011 -xxx -xxxx, 220 -xxx -xxxx and 417 -xxx -xxxx Ordering number Caddy Professional 250 (LHN 250) Spare parts are to be ordered through the nearest ESAB agency. Kindly indicate type of unit, serial number, denominations and ordering numbers according to the spare parts list. Maintenance and repair work should be performed by an experienced person, and electrical work only by a trained electrician. Use only recommended spare parts. Rights reserved to alter specifications without notice
2 C = component designation in the circuit diagram Item no. Qty Ordering no. Denomination Notes C Knob Switch 3 -pole QF Cable bushing Mains cable Strap Shackle Knob Cap Grille Filter Case Welding cable Complete Return cable Complete - 2 -
3 - 3 -
4 C = component designation in the circuit diagram Item no. Qty Ordering no. Denomination Notes C End cover Busbar Included in item 350 and Nut Front panel With text Connector OKC XS Current bar Current bar Connector Cap 2 -pole for 0.35mm 2 conductor For 2 -pole connector Connector XS Potentiometer 10 kw 2W RP Indicating lamp Light -emitting diode 28V, white Yellow XS02 and XS04 - XS07 HL01 V Connector socket 12 -pole XS Control transformer TC Capacitor 1000 mf C02, Busbar Included in item 350 and Busbar Included in item 350 and Connector 6 -pole for 0.75mm@ conductor XS Cap For 6 -pole connector Connector 2 -pole for 0.75mm@ conductor XS Cap For 2 -pole connector Connector 5 -pole for 0.75mm@ conductor XS Cap For 5 -pole connector Connector 7 -pole for 0.35mm@ conductor XS Cap For 7 -pole connector Busbar Included in item 350 and Busbar Included in item 350 and Guide Circuit board Replacing AP Rivet Circuit board AP Ferrite ring core L Ferrite ring core Included in circuit board AP05 L Ferrite ring core Included in circuit board AP05 L10-4 -
5 - 5 -
6 Valid before serial no xxx -xxxx C = component designation in the circuit diagram Item Qty Ordering no. Denomination Notes C Fan 24 VDC EV Circuit board Transistor board positive pole AP02 Included in item Capacitor 0.1 µf 1000 VDC C Rectifier bridge V01, V Insulation Guide Heat sink Circuit board Transistor board negative pole AP03 Included in item Spring Included in item Inductor Included in item 325 L Diode V Capacitor 4.7 µf C Holder Inductor Complete L Winding Included in item Bobbin Included in item Core Included in item Clip Included in item Shunt 119 mv ±1mV at 250 A RS Capacitor 0.1µF 400 VDC C Spacer Busbar Thermal cutout Opens at 130 C, Included in item 312 ST Transformer coil TC Clip Ferrite core Tape For air gap Glue, Loctite 649 For ferrite core Connector 2 -pole XS Sleeve Conductor 2 per connector To be ordered per meter, 0.6m per transformer Rectifier unit Replaced by item b Heat sink Resistor 8.2 kω 5W with cable lugs R Diode module V03, V Busbar Busbar Capacitor With cable lugs C Busbar Spacer sleeve Ferrite ring core L06, L Ferrite ring core L Busbar Washer (Made of copper) Bracket Spare parts sets Item Ordering no. Denomination Notes Busbars, primary Contains items 202, 227, 228, 234 and Transistor boards Contains items 302, 310 and Contact oil To be used when mounting items 302, 310 and
7 Valid before serial no xxx -xxxx - 7 -
8 Valid for serial no xxxx to serial no xxxx C = component designation in the circuit diagram Item Qty Ordering no. Denomination Notes C Fan 24 VDC EV Circuit board Transistor board positive pole AP02 Included in item Capacitor 0.1 µf 1000 VDC C Rectifier bridge V01, V Insulation Guide Heat sink Circuit board Transistor board negative pole AP03 Included in item Spring Included in item Inductor Included in item 425 L Diode V Capacitor 4.7 µf C Holder Inductor Complete L Winding Included in item Bobbin Included in item Core Included in item Clip Included in item Shunt 119 mv ±1mV at 250 A RS Capacitor 0.1µF 400 VDC C Spacer Busbar Thermal cutout Opens at 130 C, Included in item 412 ST Transformer coil TC Conductor To be ordered per meter, 0.6m per transformer Clip Ferrite core Tape For air gap Glue, Loctite 649 For ferrite core Connector 2 -pole XS Sleeve 2 per connector Rectifier unit Replaced by item Heat sink Diode module V03, V Busbar Busbar Capacitor With cable lugs C Busbar Cable strip Heat resistant Ferrite ring core L06, L Ferrite ring core L Busbar Resistor 8.2 kω 5W with cable lugs R Bracket Spare parts sets Item Ordering no. Denomination Notes Busbars, primary Contains items 202, 227, 228, 234 and Transistor boards Contains items 402, 410 and Contact oil To be used when mounting items 402, 410 and
9 Valid for serial no xxxx to serial no xxxx - 9 -
10 Valid from serial no xxxx C = component designation in the circuit diagram Item Qty Ordering no. Denomination Notes C Fan 24 VDC EV Circuit board Transistor board positive pole AP02 Included in item Capacitor 0.1 µf 1000 VDC C Rectifier bridge V01, V Insulation Guide Heat sink Circuit board Transistor board negative pole AP03 Included in item Spring Included in item Inductor Included in item 552 L Diode V Capacitor 4.7 µf C Holder Inductor Complete L Winding Included in item Bobbin Included in item Core Included in item Clip Included in item Shunt 119 mv ±1mV at 250 A RS Capacitor 0.1µF 400 VDC C Spacer Busbar Thermal cutout Opens at 130 C, Included in item 512 ST Transformer coil TC Conductor To be ordered per meter, 0.6m per transformer Clip Ferrite core Tape For air gap Glue, Loctite 649 For ferrite core Connector 2 -pole XS Sleeve 2 per connector Rectifier unit Complete with items 531, 532, 535, 537, 538 and Heat sink Diode module V03, V Capacitor With cable lugs C Cable strip Heat resistant Ferrite ring core L06, L Ferrite ring core L Busbar Resistor 8.2 kω 5W with cable lugs R Bracket Busbar Spare parts sets Item Ordering no. Denomination Notes Busbars, primary Contains items 202, 227, 228, 234 and Transistor boards Contains items 502, 510 and Contact oil To be used when mounting items 502, 510 and
11 Valid from serial no xxxx
12 Accessories Remote control units with cable PHA1box12pole,10mcable PHA1box12pole,25mcable PHA 2 with settings for Hot Start and welding current Remote control units without cable PHB 1 bar 12 pole, with planetary gear... PHB 2 box 12 pole, with coarse and fine setting PHC 2 box 12 pole, With coarse setting in 10 stepsandfinesettingwithineachstep... PHA5,pulsedevice... Cable12pole,5m... Cable12pole,10m... Cable12pole,15m... Cable12pole,25m TIG -torch HW--20ARV,3,8m.Formax140A bh20a11a
Valid for serial no xxx -xxx, 722 -xxx -xxxx, 726 -xxx -xxxx, 842 -xxx -xxxx, 011 -xxx -xxxx
Spare parts list Valid for serial no. 704 -xxx -xxx, 722 -xxx -xxxx, 726 -xxx -xxxx, 842 -xxx -xxxx, 011 -xxx -xxxx Ordering number 0456 840 880 LTR 160 with central connection for TIG welding 0456 840
More informationPARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-543 P-543 RETURN TO MAIN INDEX PARTS LIST FOR ! P-543-A P-543-A 1 ILLUSTRATION
More informationARC WELDING SUPPLIES
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-558 P-558 RETURN TO MAIN INDEX PARTS LIST FOR P-558-A P-558-A ILLUSTRATION
More informationCLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
More informationD300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
More informationWELDING POSITIONER PARTS BREAKDOWN DRAWING GP-200
WELDING POSITIONER PARTS BREAKDOWN 10 DRAWING GP-200 1 GP-200-001 FRAME 1 2 GK-160-012 5/16"-18UNC x 5/8" CARRIAGE BOLT 6 3 GK-136-055 5/16"Ø LOCK WASHER 6 4 GK-109-052 5/16"-18UNC HEX NUT 10 5 GP-200-002
More informationPOWER SUPPLY MODEL XP-720. Instruction Manual ELENCO
POWER SUPPLY MODEL XP-720 Instruction Manual ELENCO Copyright 2016, 1997 by ELENCO Electronics, Inc. All rights reserved. Revised 2016 REV-H 753270 No part of this book shall be reproduced by any means;
More informationDIGITAL / ANALOG TRAINER
DIGITAL / ANALOG TRAINER MODEL XK-150 A COMPLETE MINI-LAB FOR BUILDING, TESTING AND PROTOTYPING ANALOG AND DIGITAL CIRCUITS Instruction Manual ELENCO Copyright 2016, 1998 by ELENCO Electronics, Inc. All
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HL600 LEGACY SERIES MIXERS (Frequency Drive) ML-134317 ML-134342 ML-134318 ML-134341 HL600 HL661 HL662 HL600c A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
More informationTradestig AC 220 Tradestig AC 220a
GB Tradestig AC 220 Tradestig AC 220a Instruction manual and spare parts list 0460 475 074 090402 Valid for serial no. 827 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION POWER SOURCE... 5 3.1
More informationDX450 Red-D-Arc PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-582 RETURN TO MAIN INDEX PARTS LIST FOR DX450 Red-D-Arc P-582 Index of Sub
More information1 REF PART NO DESCRIPTION REMARKS QTY
Page 1 REF PART NO DESCRIPTION REMARKS QTY 100 1033987 HOUSING ASSY., LOWER 1 102 1033832 COVER, SEALED, REAR 1 103 1033988 HOUSING ASSY., UPPER 1 104 B310204411 C.B.B. SCREW M3X10 12 105 1033813 CAP,
More informationIs Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration.
Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. PARTS LIST B30L TURBO CONTENTS 1. MAIN BODY...1 ~ 2 2. GEARCASE...3
More informationPM124 Installation Instructions. See important note about revisions of this board on the last page.
Marchand Electronics Inc. PO Box 473, Webster, NY 14580 Tel:(716) 872-0980 Fax:(716) 872-1960 info@marchandelec.com http://www.marchandelec.com (c)1997 Marchand Electronics Inc. PM124 Installation Instructions
More informationLHO 110/150. Caddy 110/150. Welding rectifier. Service manual
LHO 110/150 Caddy 110/150 Welding rectifier Service manual 0740 800 110 9804 LIST OF CONTENTS Page READ THIS FIRST... 2 COMPONENT DESCRIPTION LHO 110/150... 4 CONNECTION DIAGRAM LHO 110/150... 5 FUNCTION
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 1988 Elenco Electronics, Inc. Revised 2002 REV-K 753110 DT-100 PARTS LIST If you are a student,
More informationRepair Parts List WASHER MODEL NUMBER MAF18PC2. When requesting service or ordering parts, always provide the following information:
Repair Parts List WASHER MODEL NUMBER MAF18PC2 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005 Maytag
More informationThe Wave (K-MOD103) GUITAR DWELL REVERB REVERB SWITCH ON OUT OFF
The Wave (K-MOD103) OUT IN GUITAR IN DWELL REVERB REVERB SWITCH ON GUITAR OUT POWER ON OFF OFF Please note, there are no labels for this kit. The controls, switches and connectors have only been labeled
More informationMAINTENANCE MANUAL MHz, 100 WATT POWER AMPLIFIER 19D901841G2
D MAINTENANCE MANUAL 851-870 MHz, 100 WATT POWER AMPLIFIER 19D901841G2 TABLE OF CONTENTS Page DESCRIPTION................................................ Front Cover CIRCUIT ANALYSIS.............................................
More informationParts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
More informationPM24 Installation Instructions
Marchand Electronics Inc. PO Box 473, Webster, NY 14580 Tel:(716) 872-0980 Fax:(716) 872-1960 info@marchandelec.com http://www.marchandelec.com (c)1997 Marchand Electronics Inc. PM24 Installation Instructions
More informationTIG 250 AC-DC. POWER SOURCE art
CEBORA S.p.A. 1 TIG 250 AC-DC POWER SOURCE art. 236.76 SERVICE MANUAL CEBORA S.p.A. 2 CONTENTS 1 - GENERAL INFORMATION... 3 1.1 - Introduction.... 3 1.2 - General service policy.... 3 1.3 - Safety information....
More informationTS500 Assembly guide. Soldering. TS500 Assembly guide Main PCB 1. Diodes. Document revision 1.2 Last modification : 17/12/16
TS500 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge about
More informationOperating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836
Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-690036 Ph.: 800-274-6848 Revision C 11/2014 www.jettools.com
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationHow To Make A Basic DC Controller For Model Trains.
How To Make A Basic DC Controller For Model Trains. By John Rumming. Welcome to another of my PDF how to documents. This one will cover a topic of a basic DC controller. There are a minimal amount of parts,
More informationIR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015
IR add-on module circuit board assembly - Jeffrey La Favre January 27, 2015 1 2 For the main circuits of the line following robot you soldered electronic components on a printed circuit board (PCB). The
More informationAmeritron ALS-600 Retrofit ALS-600-LPF Assembly Manual
Ameritron ALS-600 Retrofit ALS-600-LPF Assembly Manual FEATURES Automatic band change based on TX frequency. PIN diode QSK RX/TX switch. Temperature controlled FAN for quiet operation. RS-232 serial port
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35
More informationLESLIE CONSOLE CONNECTOR KIT 8400 INSTALLATION INSTRUCTIONS
LESLIE CONSOLE CONNECTOR KIT 8400 INSTALLATION INSTRUCTIONS FOR USE WITH: LESLIE Speaker Models: 122, 122RV, 222, or 222RV in conjunction with HAMMOND Speaker HAMMOND Organ Models: A, B, C, D, E, RT, BV,
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS LEGACY MIXER HL600 HL661 HL662 HL600C ML-134145 ML-134218 ML-134219 ML-134223 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43069 (May 2003)
More informationRGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor
LED STRIPS 1 LESS IS MORE FLEX: LED strip ECO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape. Voltage 24 V. ECO
More informationwww MK-Electronic de EPSON FX2170 Page 1 of 16
Page 1 of 16 REF. PART.NO. DESCRIPTION QTY STANDARD 100 1025018 HOUSING ASSY. LOWER 1 101 1025039 EDGE GUIDE ASSY. FRONT 1 102 1025041 HOUSING UPPER 1 103 1025027 COVER PRINTER REAR 1 104 1025024 COVER
More informationMarchand Electronics Inc
. PO Box 8099, Rochester NY 8 Tel:(8) 0 Fax:(8) 97 info@marchandelec.com www.marchandelec.com (c)00, 00. LN Phono Preamp REV 070 Parts List R R R R R R R7 R8 R9 R0 R R R R R R R7 R8 R9 R0 R R 9K9 K00 00
More informationBAUR Prüf- und Messtechnik GmbH Raiffeisenstrasse 8 A-6832 Sulz/Austria T. +43/5522/ F +43/5522/
BAUR Prüf- und Messtechnik GmbH Raiffeisenstrasse 8 A-6832 Sulz/Austria T. +43/5522/4941-0 F +43/5522/4941-3 service@baur.at www.baur.at Print date: 04.05.2005 Service Manual High Voltage Generator PGK
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Assembly and Instruction Manual Elenco
More informationMODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
More informationPart numbering system of the Büromaschinenwerk Sömmerda
Part numbering system of the Büromaschinenwerk Sömmerda This part number list has been compiled from multiple Soemtron drawings, other part numbers will be added as they come to light.with thanks to -ww.robotrontechnik.de
More information63601 PARTS LIST ILLUS NO. PART NO. DESCRIPTION QTY.
63601 PARTS LIST DRAWING NO. 1 1 W-A63601730 Right Cover 1 M-O63601150 Right Hand Insulation 1 2 W-A63601735 Left Cover 1 M-O63601149 Left Hand Insulation 1 3 M-S63601080 48XLO50 Belt 1 4 M-S63601081 Motor
More informationAssembly Instructions for the FRB FET FM 70 Watt Amp
Assembly Instructions for the FRB FET FM 70 Watt Amp 1.) Orient the circuit board with the diagram 2.) Use a narrow chisel tip 25-30 watt soldering iron for assembly 3.) All the small parts are taped onto
More informationTHE TRILL TREMOLO (K-960)
THE TRILL TREMOLO (K-60) DEPTH SPEED The Trill Tremolo Modkitsdiy.com Unplug when not in use to save battery life. TO AMP IN FROM GUITAR OUT Use these instructions to learn: How to build an effects pedal
More informationFULL RANGE OF FASTENERS
Office Location: Industrial area 2, After ADCB Bank, Shop no. 11 Company Contact : T: 06-5436155, F: 06-5436822, Mobile/Whatsapp : 050-7114512 E: alhasanat110@gmail.com HARDWARE Name Description FULL RANGE
More informationAssembly. Item G7 Qty 1. Item D4. M10 x 55 mm Allen Bolt. Item D5. Qty 2. Item E13 Qty 4 M10 Flat Washer. Item B18. M8 x 30 mm Allen Bolt (Black)
ACCESSORY FITMENT LIST These are all the accessories you will need to complete the assembly of your product. The following accessories are supplied in a pack and should be checked before attempting assembly
More informationTHE THUNDERDRIVE (K-950)
THE THUNDERDRIVE (K-950) OUTPUT DISTORTION Unplug when not in use to save battery life. TO AMP IN The Thunderdrive Modkitsdiy.com FROM GUITAR OUT Use these instructions to learn: How to build an effects
More informationAssembly Instructions for the 1.5 Watt Amplifier Kit
Assembly Instructions for the 1.5 Watt Amplifier Kit 1.) All of the small parts are attached to a sheet of paper indicating both their value and id. 2.) Leave the parts affixed to the paper until you are
More informationBuilding the Sawdust Regenerative Receiver
Building the Sawdust Regenerative Receiver Introduction The Sawdust is a super regenerative receiver using the basic Armstrong design architecture. The receiver uses one toroidal transformer to provide
More informationTIP TIP - HOTWIRE WP 20 SC TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100%
TIP TIP - HOTWIRE WP 20 SC TORCH Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100% COMPLETE TORCH ASSEMBLY 20002480 TIP TIG WP 20 FLEX HEAD SC TORCH ASSY WITH ORANGE LINER (14ft) 20002483 TIP
More informationDIGITAL / ANALOG TRAINER
DIGITAL / ANALOG TRAINER MODEL XK-550 A COMPLETE MINI-LAB FOR BUILDING, TESTING AND PROTOTYPING ANALOG AND DIGITAL CIRCUITS Tools and meter not included. Instruction Manual For Trainer with Organizer Case
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationUnderstanding and Optimizing Electromagnetic Compatibility in Switchmode Power Supplies
Understanding and Optimizing Electromagnetic Compatibility in Switchmode Power Supplies 1 Definitions EMI = Electro Magnetic Interference EMC = Electro Magnetic Compatibility (No EMI) Three Components
More informationSPECIFICATION FOR STEP UP TRANSFORMER 0.415/11Kv and (630KVA & 1000KVA)
SPECIFICATION FOR STEP UP TRANSFORMER 0.415/11Kv and (630KVA & 1000KVA) 0.415/33kV DESIGN AND CONSTRUCTION General 1. The transformer shall be three phase, oil immersed type, air cooled, core type, outdoor
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationRepair Parts List REFRIGERATOR MODEL NUMBER MANUFACTURING NUMBER P W
REFRIGERATOR Repair Parts List MODEL NUMBER 85288 MANUFACTURING NUMBER P1109012W When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model
More informationPulse Width Modulated Motor Drive Fault Detection Using Electrical Signature Analysis
Pulse Width Modulated Motor Drive Fault Detection Using Electrical Signature Analysis By ALL-TEST Pro, LLC & EMA Inc. Industry s use of Motor Drives for AC motors continues to grow and the Pulse-Width
More informationE X A M I N A T I O N S C O U N C I L SECONDARY EDUCATION CERTIFICATE EXAMINATION ELECTRICAL AND ELECTRONIC TECHNOLOGY TECHNICAL PROFICIENCY
TEST CODE 01317031/SBA FORM TP 2012069 JUNE 2012 C A R I B B E A N E X A M I N A T I O N S C O U N C I L SECONDARY EDUCATION CERTIFICATE EXAMINATION ELECTRICAL AND ELECTRONIC TECHNOLOGY TECHNICAL PROFICIENCY
More informationDLVP A OPERATOR S MANUAL
DLVP-50-300-3000A OPERATOR S MANUAL DYNALOAD DIVISION 36 NEWBURGH RD. HACKETTSTOWN, NJ 07840 PHONE (908) 850-5088 FAX (908) 908-0679 TABLE OF CONTENTS INTRODUCTION...3 SPECIFICATIONS...5 MODE SELECTOR
More informationHigh Voltage Supply. 330 V from 12 V. For the Valved RIAA Preamplifier and other applications POWERSUPPLY
For the Valved RIAA Preamplifier and other applications High Voltage Supply 33 V from 12 V Design by T. Giesberts Although this supply was primarily designed for use with the Valved RIAA Preamplifier,
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationBuilding the Sawdust Regenerative Receiver
Building the Sawdust Regenerative Receiver Introduction The Sawdust is a super regenerative receiver using the basic Armstrong design architecture. The receiver uses one toroidal transformer to provide
More informationBill of Materials: PWM Stepper Motor Driver PART NO
PWM Stepper Motor Driver PART NO. 2183816 Control a stepper motor using this circuit and a servo PWM signal from an R/C controller, arduino, or microcontroller. Onboard circuitry limits winding current,
More informationBasic DC Power Supply
Basic DC Power Supply Equipment: 1. Analog Oscilloscope 2. Digital multimeter 3. Experimental board and connectors. Objectives: 1. To understand the basic DC power supply both half wave and full wave rectifier.
More informationModel LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
More informationMANUAL UPDATING CHANGES CHANGE DATE: June 16, 2004
MANUAL UPDATING CHANGES CHANGE DATE: June 16, 2004 MANUAL IDENTIFICATION MANUAL UPDATING COVERAGE This supplement adapts your manual to Serial Numbers prefixed through: 3708A Instrument: HP 5087A Distribution
More informationMaxim Integrated Products 1
9-644; Rev ; 6/00 MAX3296 Shortwave or VCSEL General Description The MAX3296 shortwave or vertical cavity-surface emitting laser (VCSEL) evaluation kit (EV kit) is an assembled, surface-mount demonstration
More informationP100 Series Parts List
Parts List Replacement parts may no longer be available Parts List REF. NO. PART NO. DESCRIPTION 1 1305227Q01 Escutcheon (High/Low Power Models only) or 1305227Q02 Escutcheon (Low Power Models only) 2
More informationColumn & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
More informationMODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
More informationNote: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
More informationBX3230 Installation Instructions Oldsmobile Silhouette Chevy Venture
BX3230 Installation Instructions 1997-2004 Oldsmobile Silhouette 1997-2003 Chevy Venture Serial No. The headlight assembly, front fascia, horn bracket and windshield washer reservoir are removed for baseplate
More informationMX-4 Parts List Description
MX-4 Parts List Item Description 02005402 AT90S8515 8AC Microprocessor 8MHz PLCC 02050120 74 HCT 4051P 8-1 MUX,SMD 02100202 LM 358 Dual opamp, SMD 02105205 L7805 5V/1A Voltage Stab, SMD 02121010 ULN2803A
More informationTHE RING RESONATOR (K-975)
THE RING RESONATOR (K-975) OUTPUT BOOST The Ring Resonator An Octave Up Fuzz Modkitsdiy.com 9 VDC CENTER (-) ADAPTER TO AMP IN FROM GUITAR OUT Unplug when not in use to save battery life. Use these instructions
More informationTuna Tunah. Switched Inductor Antenna Tuner. Builder's Guide by Kevin Gilot NZ1I & Rex Harper W1REX. version 1.2
Tuna Tunah Switched Inductor Antenna Tuner Builder's Guide by Kevin Gilot NZ1I & Rex Harper W1REX version 1.2 Tuna Tunah List of Materials Qty Description PCB Location ( ) 1-.22uH Inductor (Red-Red-Silver).22
More informationLaney. CD650Mixer/Amplifier ServiceInformation. PartNumber -SM3041
Laney CD650Mixer/Amplifier ServiceInformation PartNumber -SM3041 Laney Contents 1.DWG 3044 Service Schematic 2.DWG 2615 MainsWiring 3.DWG 3010 Block Diagram 4.DWG 9324 Preamp DiagramChannel 5.DWG 9324
More information+ 24V 3.3K - 1.5M. figure 01
ELECTRICITY ASSESSMENT 35 questions Revised: 08 Jul 2013 1. Which of the wire sizes listed below results in the least voltage drop in a circuit carrying 10 amps: a. 16 AWG b. 14 AWG c. 18 AWG d. 250 kcmil
More informationSoftRock v6.0 Builder s Notes. April 6, 2006
SoftRock v6.0 Builder s Notes April 6, 006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0. inch diameter),
More informationModel LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
More informationPARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
More informationLA502 Assembly guide Main PCB Resistors - (2)
LA502 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge about
More informationTIP TIP - HOTWIRE WP 20 SC TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100%
TIP TIP - HOTWIRE WP 20 SC TORCH Materials: Steel/Stainless/Aluminum Duty Cycle: 280A / 100% COMPLETE TORCH ASSEMBLY 10002480 TIP TIG WP 20 FLEX HEAD SC TORCH ASSY WITH ORANGE LINER (14ft) $995.00 ea.
More informationSpecimen Products Single Ended Stereo Amp Instruction Book
Specimen Products Single Ended Stereo Amp Instruction Book Specimen tube amplifier designs are informed by decades of servicing and building musical instrument amps. As a result of being subjected to the
More informationReference number Dimensions Lamp Light colour
1 LED STRIPS PRO up to 152 lm/w LESS IS MORE FLEX: LED strip PRO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape.
More informationSoftRock v6.0 Builder s Notes. May 22, 2006
SoftRock v6.0 Builder s Notes May 22, 2006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0.1 inch diameter),
More informationList of Items Available in the Laboratory the Lab
List of Items Available in the Laboratory the Lab Category Component 555 Timer $0.30 5V Relay $3.50 74xxx Series IC Chip $0.30 Battery - 12V (rechargeable Lead-acid type) $16.00 Battery - 6V (rechargeable
More informationDRTXM2 TRANSMITTER BILL OF MATERIAL IDENT QTY PART NUMBER DESCRIPTION
DRTXM2 TRANSMITTER BILL OF MATERIAL H1 C1-5,7,10-11,15,17-18,20, 22-28,34,38, 43-46,49-53,1A,2A 8 Right Angle LED Mount 0 0.01uf 50V Ceramic Disc Capacitor 31 0.1 UF/50V Decoupling Capacitors C13,14,39-42
More informationFM RADIO KIT ESSENTIAL INFORMATION. Version 2.0 GET IN TUNE WITH THIS
ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS GET IN TUNE WITH THIS FM RADIO KIT Version 2.0 Build Instructions Before you start, take
More informationComponent Identification
Generic Skills for Microelectronic Engineers Component Identification AIM: To be able to identify common electronic components used in miniature and medium power applications. Methods of labelling, range
More informationAM RADIO KIT MODEL AM-780K. Assembly and Instruction Manual
AM RADIO KIT MODEL AM-780K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 2007, 1999 by Elenco Electronics, Inc. All rights reserved. Revised 2007 REV-F 753108 No part of this book
More informationDIGITAL / ANALOG TRAINER
DIGITAL / ANALOG TRAINER MODEL XK-700 A COMPLETE MINI-LAB FOR BUILDING, TESTING AND PROTOTYPING ANALOG AND DIGITAL CIRCUITS Tools and meter not included. Instruction Manual For Trainer with Organizer Case
More informationIM /2013 Rev. 0 POWER WAVE STT module CE
IM2049 02/2013 Rev. 0 POWER WAVE STT module CE Spare Parts... 1 POWER WAVE STT module CE... 1 MISCELLANEOUS ITEMS (NOT ILLUSTRATED)... 2 Fig. A: Case Front Assembly, Includes: L12786... 2 Fig. B: Top Extrusion
More information2.14 Main Cable Type HO7RN-F4G10-15 Metres each Chiller Tank Capacity- 75 Litres Compressor- 3.5 Tons Refrigeration type
PAGE 2 of 6 2.14 Main Cable Type HO7RN-F4G10-15 Metres each 2.15 (a) O/P Voltage-350V(Max.) (b) O/P Current 150A(Max.) 2.16 Chiller Tank Capacity- 75 Litres Compressor- 3.5 Tons Refrigeration type 2.17
More informationFABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems
FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -
More informationTRAKFAST REPAIR MANUAL DANGER TOOL DISASSEMBLY ALWAYS TAKE THE FOLLOWING PRECAUTIONS BEFORE ANY SERVICE OR ROUTING MAINTENANCE IS PERFORMED:
DANGER ALWAYS TAKE THE FOLLOWING PRECAUTIONS BEFORE ANY SERVICE OR ROUTING MAINTENANCE IS PERFORMED: REMOVE FASTENERS REMOVE FUEL CELL REMOVE BATTERY REMOVE THE MAGAZINE ASSEMBLY Loosen and remove knob
More informationTechnician Licensing Class T6
Technician Licensing Class T6 Amateur Radio Course Monroe EMS Building Monroe, Utah January 11/18, 2014 January 22, 2014 Testing Session Valid dates: July 1, 2010 June 30, 2014 Amateur Radio Technician
More informationHTC Technical Manual
10.04.009 Table of contents 1. General...3. Technical details...3.1. Primary winding...3.. Secondary winding...3.3. Top terminal...3.4. Rotary spark gap...3.5. Safety spark gap...4 3. Measurements...5
More informationRepair Parts List REFRIGERATOR MODEL NUMBER ACD2234HRS. When requesting service or ordering parts, always provide the following information:
Repair Parts List REFRIGERATOR MODEL NUMBER ACD2234HRS When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description
More informationECE 203 LAB 6: INVERTED PENDULUM
Version 1.1 1 of 15 BEFORE YOU BEGIN EXPECTED KNOWLEDGE Basic Circuit Analysis EQUIPMENT AFG Oscilloscope Programmable Power Supply MATERIALS Three 741 Opamps TIP41 NPN power transistor TIP42 PNP power
More informationTektronix 485 repair
Tektronix 485 repair Fig. 1 Tektronix 485. 2 channel, 350MHz oscilloscope. Some time ago my colleague gave me a faulty TEK 485 oscilloscope. Symptoms: Bright, blue mains fuse explosion after pressing the
More informationSmart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
More information