RGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor

Transcription

1 LED STRIPS 1 LESS IS MORE FLEX: LED strip ECO Type of Protection: IP 00 IP 66 CVD Protection Class: III Flexible LED strip on roller (5 m). Mounting using 3M Thermal double-sided tape. Voltage 24 V. ECO up to 116 lm/w 500 lm/m 1000 lm/m Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of resistor 2000 lm/m Tuneable White Cuttable every 50 mm. 120 LEDs per meter (LED Pitch 8,3 mm). Constant luminous flux by means of resistor RGB Cuttable every 100 mm. 60 LEDs per meter (LED Pitch 16,7 mm). Constant luminous flux by means of transistor Reference number Dimensions Lamp Light colour Luminous flux Lamp power EEC gross LED strip ECO Price Category 21 Type of protection IP 00 - Please note: This is non IP rated and only to be used internally. 4,3 W/m 500 lm/m 116 lm/w L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 130, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 130, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 130, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 130,00 9,0 W/m 1000 lm/m 111 lm/w L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 180, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 180, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 180, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 180,00 19,2 W/m 2000 lm/m 104 lm/w L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 280, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 280, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 280, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 280,00 Tuneable White (TW) 13,5 W/m 1500 lm/m 111 lm/w L 5000, B 8, H 2 LED lm/m 13,5 W/m 120 A+ 280,00 RGB 7,2 W/m 360 lm/m 50 lm/w L 5000, B 8, H 2 LED RGB 360 lm/m 7,2 W/m 120 B 380,00 Type of protection IP 66 CVD 4,3 W/m 500 lm/m 116 lm/w L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 180, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 180, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 180, L 5000, B 8, H 2 LED lm/m 4,3 W/m 120 A++ 180,00 9,0 W/m 1000 lm/m 111 lm/w L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 230, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 230, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 230, L 5000, B 8, H 2 LED lm/m 9,0 W/m 120 A+ 230,00 19,2 W/m 2000 lm/m 104 lm/w L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 330, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 330, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 330, L 5000, B 8, H 2 LED lm/m 19,2 W/m 120 A+ 330,00 Tuneable White (TW) 13,5 W/m 1500 lm/m 111 lm/w L 5000, B 8, H 2 LED lm/m 13,5 W/m 120 A+ 330,00 RGB 7,2 W/m 360 lm/m 50 lm/w L 5000, B 8, H 2 LED RGB 360 lm/m 7,2 W/m 120 B 430,00 - Made in EU - Up to 116 lm/w - Can be cut on site every 50 to 100 mm with standard tool - Plug & Play connectors (solderless connections) - LED rated life 50,000 h (L80, B10); RGB: 60,000 h (L80, B10) - Ambient temperature: -20 bis +45 C - Colour rendering Ra 80 (TW Ra 85) - Light control from 2700 K up to 5000 K (daylight) and RGB Can be cut on site with standard tool LED strip must be operated on heat conducting surfaces only. You find the suitable aluminium profiles on page 13. Insufficient cooling may reduce the lifetime of the LED strip or lead to premature failure. Please refer to the enclosed instruction and operation manual. Accessories Shrink tube Shrink tubes made from meshed polyolefin (halogen-free) and hot melt glue coating to maintain IP 66 CVD protection type for electrical connectors. Colour transparent. Characteristics: - shrink rate 4:1 (nominal-ø non-shrunk 12 mm, nominal-ø shrunk 3 mm) - shrink temperature > +120 C; glue coating softening temperature +85 C - permanent protection from moisture and ambient influences - electrical insulation Shrink tube Price Category L 1000, D 12 14,50 Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until TW = Tuneable White

2 6 FEEDS AND CONNECTORS LESS IS MORE FLEX: Feeds and connectors For LED system PRO and ECO. Package 1 piece. Reference number Dimensions Feeds and connectors gross Feeds and connectors Price Category L 2000, B 9, H 4 Feed 2-pole for single light colour (male plug, open line ends) 12, L 2000, B 9, H 4 Feed 4-pole for RGB and TW (male plug, open line ends) 20, L 1000, B 9, H 4 Connector 2-pole for single light colour (male plug, 2 sides) 15, L 1000, B 9, H 4 Connector 4-pole for RGB and TW (male plug, 2 sides) 22, L 8, B 9, H 6 Plug connector 2/4-pole (gapless) for single light colour, RGB and TW 6,00 Accessories Shrink tube Shrink tubes made from meshed polyolefin (halogen-free) and hot melt glue coating to maintain IP 66 CVD protection type for electrical connectors. Colour transparent. Characteristics: - shrink rate 4:1 (nominal-ø non-shrunk 12 mm, nominal-ø shrunk 3 mm) - shrink temperature > +120 C; glue coating softening temperature +85 C - permanent protection from moisture and ambient influences - electrical insulation Shrink tube Price Category L 1000, D 12 14,50 Please also refer to our planning and configuration schedule on the last pages of our brochure. RGB TW RGB TW Example with gapless connector Plug connector Converter LED strip Feed or Example with 2-pole or 4-pole flexible connector Connector or Converter LED strip Feed or 18 Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until TW = Tuneable White

3 CONVERTERS 7 LESS IS MORE FLEX: Converters Constant voltage converters. Converters to be mounted on site. Wired ready for connection with cable 200 mm (-). Package 1 piece. Reference number Dimensions for system power up to gross Converters 24 V Price Category 21 For single light colour L 153, B 30, H 21 max. 21 W 80, L 153, B 30, H 21 max. 21 W, TouchDim, DALI 160, L 188, B 30, H 21 max. 33 W 90, L 188, B 30, H 21 max. 33 W, TouchDim, DALI 170, L 240, B 30, H 21 max. 60 W 120, L 240, B 30, H 21 max. 60 W, TouchDim, DALI 200, L 305, B 30, H 24 max. 100 W 170, L 305, B 30, H 24 max. 100 W, TouchDim, DALI 250,00 For RGB and Tuneable White (TW) Control L 220, B 47, H 44 max. 60 W, EASY 265, L 220, B 47, H 44 max. 75 W, DALI 242,10 DALI.76 RGB TW (EASY DALI.76) Please also refer to our planning and configuration schedule on the last pages of our brochure. The following chart gives an overview about the wiring from the LED strip to the converter and the required cable crosssections only and is not meant to replace the conforming to local installation standards of the feed cables. Chart to be read as follows: For power of 21 W and a required cable length of 13 m the cable cross-section must be at least 0,5 mm 2. Cable cross-section Converter 24 V 21 W 33 W 60 W 100 W 0,50 mm 2 13 m 10 m 6 m 3,5 m 0,75 mm 2 20 m 15 m 9 m 5 m 1,00 mm 2 26 m 20 m 12 m 7 m 1,50 mm 2 40 m 30 m 17 m 10 m Converter LED strip Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until TW = Tuneable White

4 7 LIGHT CONTROL Control components for DALI converters for use with LED strips with light colour ( ) DALI rotary potentiometers Protection class: II Housing: plastic. Digital potentiometer for switching and dimming up to 25 DALI converters (max. 50 DALI converters when operating two DALI rotary potentiometers in parallel, can be extended to max. 4 control points). Automatic synchronisation between control points. Integrated DALI voltage supply to provide the necessary DALI control current (= active operation) or voltage drawn directly from the DALI control line (= passive operation). Broadcast operation (no need for DALI address assignment). Length of DALI control line: max. 300 m (for 1.5 mm 2 ). Screen and white knob included in the scope of delivery. Installation in flush mounted sockets. DALI rotary potentiometers Price Category L 80, B 80, H ,00 DALI push-buttons Protection class: II For use with standard push-buttons. Housing: plastic. Digital push-buttons for switching and dimming up to 25 DALI converters (max. 50 DALI converters when operating two DALI push-buttons in parallel, can be extended to max. 4 control points). Automatic synchronisation between control points. Integrated DALI voltage supply to provide the necessary DALI control current (= active operation) or voltage drawn directly from the DALI control line (= passive operation). Broadcast operation (no need for DALI address assignment). Length of DALI control line: max. 300 m (for 1.5 mm 2 ). Installation in flush mounted sockets. DALI push-buttons Price Category L 48, B 48, H ,00 DALI-Repeater Protection class: II Housing: plastic. DALI controller and signal amplifier. Connection of up to 64 DALI EB in broadcast operation. Touch dim control. Enables DALI line to be extended in 300 m increments (for 1.5 mm 2 ). Suitable for installation in the luminaire or external operation with recessed housing ( ) with integrated strain-relief. DALI-Repeater Price Category L 189, B 30, H ,00 Installation housing for DALI-Repeater L 261, B 71, H 27 39,00 20 Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until

5 LIGHT CONTROL 7 light control +³ Economy Protection class: I Housing: metal, powder-coated; for universal mounting; ready to plug in (GST15 plug included). Remote control must be ordered separately. Available colours: 2 = white, 3 = black Energy savings up to 30% TOUCH DIM RC % - Plug & Play - Easy retrofitting - Dimming without control line by maintenance-free EnOcean radio techno logy (batteryless radio technology) - Ideally suited for small office rooms with glass or flexible walls - Wireless transmitter sticks to any smooth surface - Ready for connection of control unit for up to 2 x 14 luminaires (1 x DALI TouchDim EB) - DALI TouchDim EB necessary - Radio wall transmitter / radio hand transmitter to be ordered separately Reference number Dimensions Interface No. of ballasts Function gross light control +³ Economy Price Category 21 TOUCH DIM RC L 243, B 104, H 27 DALI TouchDim 2 x 14 Switchable, dimmable, 360, L 243, B 104, H 27 DALI TouchDim 2 x 14 radio signal (remote control) 360,70 Remote control Price Category L 82, B 49, H ,00 Wall-mounted wireless transmitter Price Category L 80, B 80, H ,00 For questions regarding light management kindly contact our support team: lms@rzb-leuchten.de Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until

6 7 LIGHT CONTROL Control components for DALI converters for use with LED strips RGB and TW Interface for local switch Protection class: III For up to 8 standard push-buttons. 8 inputs for potential-free contacts, 25 m cable length on each input and 50 m max. total lengths for all inputs. Housing: plastic. Direct connection to converter ( RGB and TW). Power supply from converter (no separate power supply required). Installation in flush-mounted socket. Interface for local switch Price Category L 44, B 44, H ,00 PC-Kit Easy Colour Control Software and connection cable for RGB-Tuneable White (TW) converter For setting individual scenes and sequences. Reference number gross PC-Kit Easy Colour Control Price Category ,30 Remote Control RGB Type of protection: IP20 Protection class: III Set contains: Radio receiver: 433 MHz band Radio transmitter: Hand transmitter for switching on/off, dimming and RGB colour changing. Dimensions hand transmitter: L114, W56, H23 Range: 30 m 2 x standard AAA batteries not included. H L B Remote Control RGB Price Category L 90, B 70, H ,00 For questions regarding light management kindly contact our support team: lms@rzb-leuchten.de 22 Specifications subject to alteration All prices are non-binding price recommendations in Euro gross. Prices shall remain valid until