cosmo ELECTRONICS CORPORATION

Transcription

1 DATE:5/5/ NO.6P4 KMOC6 SHEET OF 6 Zero Crossing Optoisolators TRIAC Features Driver Output (6V Volts Peak). Compact dual-in-line package. 2. 6V peak blocking voltage.. Isolation voltage between input and output (Viso:5Vrms). For 5/24 Vac(rms) Application:. Solenoid/Valve Controls. 2. Lighting Controls.. Static Power Switches. 4. AC Motor Drives. 5. Temperature Controls. 6. E.M. Contactors. 7. AC Motor Starters. 8. Solid State Relays. 9. Programmable controllers.

2 DATE:5/5/ NO.6P4 KMOC6 SHEET 2 OF 6. OUTSIDE DIMENSION:UNIT (mm) 6 XXX Date Code Anode o. o 5.8 TOLERANCE : ±.2mm 2. SCHEMATIC:TOP VIEW 2 Zero Crossing Circuit 6 4. Anode 2. Cathode. NC 4. Main Terminal 6. Main Terminal

3 DATE:5/5/ Absolute Maximum Ratings Input NO.6P4 KMOC6 SHEET OF 6 Parameter Symbol Rating Unit Forward current IF 5 ma Peak forward current IFM A Reverse voltage VR 6 V Power dissipation PD 7 mw Off-State Output Terminal voltage VDRM 6 VPEAK Output On-State R.M.S. Current IT(RMS) ma Peak Repetitive Surge Current (PW=ms.DC %) ITSM A Power dissipation PD mw Total power dissipation Ptot mw Isolation voltage minute Viso 5 Vrms Operating temperature Topr -4 to + Storage temperature Tstg -5 to +25 Soldering temperature second Tsol 26 Electro-optical Characteristics Parameter Symbol Conditions Min. Typ. Max. Unit Forward voltage VF IF=mA V Input Reverse current IR VR=4V - - ua Peak Blocking Current IDRM VDRM=6V na Output ON-State Voltage VTM ITM=mA -.8 V Holding Current IH -. - ma Critical rate of rise of OFF-state voltage Tranfer Inhibit Voltage (MT-MT2 Voltage charac- above which device not trigger.) teristics Leakage in Inhibited State dv/dt VDRM=(/ 2 )*Rated V/uS V INH IF=5mA - V I DRM2 I F =Rated I FT, Rated V DRM, Off State ua Isolation resistance Riso DC5V 5x - Ohm Minimum trigger current IFT Main Terminal Voltage=V ma

4 DATE:5/5/ NO.6P4 KMOC6 SHEET 4 OF 6 Fig. Forward Current vs. Fig.2 Diode Power Dissipation vs. Forward Current IF(mA) Diode Power Dissipation PD(mW) Fig. On-State R.M.S. Current vs. Fig.4 Total Power Dissipation vs. On-State R.M.S. Current (ma) Total Power Dissipation PC(mW) Fig.5 Peak Forward Current vs. Duty Ratio Fig.6 Forward Current vs. Forward Voltage Peak Forward Current IFM(mA) Pulse width <=us Ta=25 C - - Duty Ratio Forward Current IF(mA) Ta=75 C 5 C.5 25 C C -25 C Forward Voltage V F (V).

5 DATE:5/5/ NO.6P4 KMOC6 SHEET 5 OF 6 Fig.7 On-State Characteristics Fig.8 Inhibit Voltage vs. Temperature On-State Current (ma) Output Pulse Width 8us I F =ma,f=6hz,ta=25 C On-State Voltage (V) VINH, Normalized Normalized to Ta=25 C Peak Blocking Current IDRM(nA) Fig.9 Leakage with LED off vs. 5 5 I F=,V DRM =Rated IDRM2 Normalized Fig. I DRM2,Leakage in Inhibit State vs. Temperature IF=RATED IFT Fig. Trigger Current vs. IFT, Normalized Normalized To Ta=25 C

6 NOTICE DATE:5/5/ NO.6P4 KMOC6 SHEET 6 OF 6 The information contained in this document is intended to be a general product description and is subject to change without notice. Please contact cosmo in order to obtain the latest device data sheets before using any cosmo device. cosmo does not assume any responsibility for use of any circuitry described. No circuit patent licenses are implied. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or by any means, or transferred to any third party without the prior written consent of cosmo Electronics Corporation. The devices listed in this document are designed for general applications only in electronic equipment. No devices shall be deployed which require higher level of reliability such as: - Medical and other life support equipments. - Space application. - Telecommunication equipment (trunk lines). - Nuclear power control equipment. Unless it received prior written approval from cosmo. cosmo takes no responsibility for damages arise form the improper usage of our device. Please contact cosmo for further information regarding the above notices.