Multilayer Balun Transformers
|
|
|
- Wendy Warner
- 6 years ago
- Views:
Transcription
1 Multilayer Balun Transformers For.4GHz W-LAN/Bluetooth HHM Series Type: HHM57 (..5.95mm) HHM5 (..5.95mm) HHM5 (..5.95mm) HHM54E (..5.95mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
2 (/8) Multilayer Chip Baluns For Bluetooth &.4GHz W-LAN Conformity to RoHS Directive HHM Series HHM57 SHAPES AND DIMENSIONS ±.5.95±. 3.65±..3±..±..35±..5±.5 Terminal functions Unbalanced port GND or DC feed+ RF GND 3 Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input Balanced output 3 RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 4 to 5MHz db min. 8±deg. ±.db.db max. 4 to +85 C 4 to +85 C pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
3 (/8) FREQUENCY CHARACTERISTICS Unbalance /Balance RETURN LOSS Return loss(db) INSERTION LOSS Insertion loss(db) 7.7dB 4.48dB.5..75dB.5.93dB AMPLITUDE BALANCE Amplitude balance(db) dB 3.6dB PHASE BALANCE Phase balance(deg.) deg deg / 6 / e75_multibalun_hhm
4 (3/8) Multilayer Chip Baluns For Bluetooth &.4GHz W-LAN Conformity to RoHS Directive HHM Series HHM5 SHAPES AND DIMENSIONS ±.5.95±. 3.65±..3±..±..35±..5±.5 Terminal functions Unbalanced port GND or DC feed+ RF GND 3 Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input Balanced output Ω 3 RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities Ω 4 to 5MHz db min. 8±deg. ±.db.db max. 4 to +85 C 4 to +85 C pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
5 (4/8) FREQUENCY CHARACTERISTICS Unbalance /Balance Ω RETURN LOSS Return loss(db) INSERTION LOSS Insertion loss(db) 36.54dB 9.3dB dB.5.73dB AMPLITUDE BALANCE Amplitude balance(db) 5 4.7dB 3.54dB PHASE BALANCE Phase balance(deg.) deg deg / 6 / e75_multibalun_hhm
6 (5/8) Multilayer Chip Baluns For Bluetooth &.4GHz W-LAN Conformity to RoHS Directive HHM Series HHM5 SHAPES AND DIMENSIONS ±.5.95±. 3.65±..3±..±..35±..5±.5 Terminal functions Unbalanced port GND or DC feed+ RF GND 3 Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input Balanced output Ω 3 RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities Ω 4 to 5MHz db min. 8±deg. ±.db.db max. 4 to +85 C 4 to +85 C pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
7 (6/8) FREQUENCY CHARACTERISTICS Unbalance /Balance Ω RETURN LOSS Return loss(db) INSERTION LOSS Insertion loss(db) 3.8dB 4.96dB..5..8dB.5.76dB AMPLITUDE BALANCE Amplitude balance(db) dB 3.57dB PHASE BALANCE Phase balance(deg.) deg deg / 6 / e75_multibalun_hhm
8 (7/8) Multilayer Chip Baluns For Bluetooth &.4GHz W-LAN Conformity to RoHS Directive HHM Series HHM54E SHAPES AND DIMENSIONS ±.5.95±. 3.65±..3±..±..35±..5±.5 Terminal functions Unbalanced port GND or DC feed+ RF GND 3 Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input Balanced output 75Ω 3 RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 75Ω 4 to 5MHz db min. 8±deg. ±.5dB.dB max. 4 to +85 C 4 to +85 C pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
9 (8/8) FREQUENCY CHARACTERISTICS Unbalance /Balance 75Ω RETURN LOSS AMPLITUDE BALANCE Return loss(db) : 4.MHz 9.36dB : 45.MHz.dB 3: 5MHz.86dB Amplitude balance(db) 5 4 : 4.MHz.6dB 3 : 45.MHz.6dB 3: 5.MHz.4dB INSERTION LOSS Insertion loss(db)..5 : 4.MHz..45dB : 45.MHz.5.47dB. 3: 5.MHz.5.43dB PHASE BALANCE Phase balance(deg) : 4.MHz 76.4degrees : 45.MHz 76.89degrees 3: 5.MHz 77.4degrees - / 6 / e75_multibalun_hhm
10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TDK: HHM-5 HHM57A
Multilayer Balun Transformers
Multilayer Balun Transformers HHM Series Type: HHM58B (..5.95mm) HHM595A (..5.95mm) HHM596A (..5.95mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive
Multilayer Balun Transformers
Multilayer Balun Transformers For 5.GHz W-LAN HHM Series Type: HHM7B (.6.8.6mm) HHM7B (.6.8.6mm) HHM75A (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with
Multilayer Balun Transformers
Multilayer Balun Transformers HHM Series Type: HHM7J (.6.8.6mm) HHM7E (.6.8.6mm) HHM77D (.6.8.6mm) HHM75E (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with
Multilayer Balun Transformers
Multilayer Balun Transformers For GSM9 Tx & Rx HHM Series Type: HHM776B (.6.8.6mm) HHM76B (.6.8.6mm) HHM7B (.6.8.6mm) HHM76P (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that,
Wound Chip Baluns. ATB Series. Type: ATB ( mm) ATB ( mm) ATB M (
Wound Chip Baluns ATB Series Type: ATB-5 (...mm) ATB-75 (...mm) ATB-75M (...mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium,
April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/81/83197626.jpg "April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s April 2015 Multilayer Balun For 1920-2170MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Balun For 1920-2170MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/87/95899776.jpg "June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz
October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
![October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]](/thumbs/83/88211263.jpg "October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s October 2017 Multilayer Balun For 4900 5950MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Balun For 4900 5950MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
July Balun Transformers. Wound SMD. ATB series. ATB CT ( mm) ATB CT ( mm) ATB CT (
R F C o m p o n e n t s July 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/86/93522025.jpg "June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24 25MHz DEA2245BT-721A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output
DEA211898BT-9033B1. Multilayer Band Pass Filter (Balance Output Type) (2in1) For MHz / MHz. 2.0x1.5mm.
R F C o m p o n e n t s October 5 Multilayer Band Pass Filter (Balance Output Type) (in) For 869-96MHz / 85-5MHz DEA898BT-9B.x.5mm * Dimensions Code JIS Multilayer Band Pass Filter (Balance Output Type)
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Discover TDK Solutions
Discover TDK Solutions RF Components for Wireless Applications TDK RF Components & Services : Band Pass Filters Diplexers Low Pass Filters Couplers High Inductors Circulators/ Isolators Baluns Antennas
Common Mode Choke Coils(Line Filters)
Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December
Inductors for Standard Circuits
Inductors for Standard Circuits Multilayer/STD magnetic shielded MLF series Type: MLF05L MLF608 MLF202 05[0402 inch]* 608[0603 inch] 202[0805 inch] * Dimensions Code JIS[EIA] Issue date: November 20 Conformity
TDK CORPORATION NEXT 2 MLK0603
Multilayer Chip Inductors For High-frequency Circuits And Modules, Conforming to RoHS Directive Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium,
RFFM MHz Transmit/Receive Module
925MHz Transmit/Receive Module This module is intended for 868MHz and 915MHz AMR solutions. The FEM provides separate ports for Rx/Tx paths, single-ended Tx and single-ended Rx or Rx differential port,
ATB series. Balun Transformers. Wound SMD
R F C o m p o n e n t s March 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) ATB-00CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products,
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
Common Mode Choke Coils
Common Mode Choke Coils For power line UF series Type: Two sections bobbin type for high frequency UF Issue date: September 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive
Chip Beads(SMD) For Signal Line
(1/8) Chip Beads(SMD) For Signal Line Conformity to ohs Directive MM Series MM168 Type FEATUES Chip bead(impeder), MM series offers 7 construction materials. Size standardized for use by automatic assembly
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
CE-09 xx Non-insulation type DC-DC converter
CE-9 xx Non-insulation type DC-DC converter Features SMD type Short in height: 4.mm or 4.mm Equipped with variable output voltage (single output type only) Wide range of operating temperature conditions:
1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C
SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
"High Frequency Ceramic Solutions"
2.45 GHz High Gain Chip Antenna ( Orientation P/N 2450AT45A100 Detail Specification: 01/05/2012 Page 1 of 10 General Specifications Part Number Frequency Range Peak Gain Average Gain 2450AT45A100 2400-2500
Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series
(/7) Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series Conformity to RoHS Directive TDK s compact type common mode choke coils are suitable for protecting telephone circuitry from
Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
2.4 GHz ISM Band Working Frequency
RFBLN 2012 (0805) Series RoHS Compliance MULTILAYER CERAMIC BALUN TRANSFORMER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBLN2012090A1T *Contents in this sheet are subject to change
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
High Frequency Ceramic Solutions
Page 1 of 5 General Specifications Part Number 245BM14A23 Frequency (MHz) 24-25 Unbalanced Impedance 5 Ω Conjugate match compatible to Balanced Differential Impedance RTL8188EU, RTL8192EU and ST BlueNRG
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
Insertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
± 2g Tri-axis Analog Accelerometer Specifications
Product Description The is a Tri-axis, silicon micromachined accelerometer with a full-scale output range of +/-2g (19.6 m/s/s). The sense element is fabricated using Kionix s proprietary plasma micromachining
Inductors for Power Circuits
Inductors for Power Circuits Radial lead TSL series Type: TSL0709 TSL0808 TSL1112 TSL1315 Issue date: September 2011 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC,
LTS(3-terminal type self-oscillation formula) series TSP(2-terminal type separate excitation oscillation formula) series
Powder Level s Piezoelectric type LTS(3-terminal type self-oscillation formula) series TSP(2-terminal type separate excitation oscillation formula) series Issue date: February 2012 Conformity to RoHS Directive:
August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/83/87790005.jpg "August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s August 2016 Multilayer Band Pass Filter For 2412-2484MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2412-2484MHz Conformity to RoHS Directive
915MHz Transmit/Receive Module
RF6599 915MHz Transmit/Receive Module This module is intended for 915MHz AMR solutions. It provides separate ports for Rx and Tx paths and two ports on the output for connecting a diversity solution or
NPN SILICON TRANSISTOR
TK NPN SILICON TRANSISTOR FEATURES OUTLINE DIMENSIONS (Units in mm) NEW M03 PACKAGE: Smallest transistor outline package available Low profile/0.59 mm package height Flat lead style for better RF performance
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 214. All of the contents specified herein are
L, S-BAND SPDT SWITCH
DESCRIPTION The µpg8tk is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application. This device can operate control switching
RFDA3016 Digital Controlled Variable Gain Amplifier 3000MHz to 3800MHz, 6-Bit 0.5dB LSB Control
Digital Controlled Variable Gain Amplifier 3MHz to 38MHz, 6- Bit.dB LSB Control RFDA316 Digital Controlled Variable Gain Amplifier 3MHz to 38MHz, 6-Bit.dB LSB Control Package: MCM 28-Pin, 6.mm x 6.mm 28
3.0 GHz DIVIDE BY 4 PRESCALER
. GHz DIVIDE BY PRESCALER UPB5GV FEATURES TEST CIRCUIT HIGH FREUENCY OPERATION TO GHz FIXED DIVIDE RATIO: LOW CURRENT CONSUMPTION: 5 ma at 5 V SMALL PACKAGE: 8 PIN SSOP AVAILABLE IN TAPE AND REEL Power
50 Ω nominal input / conjugate match balun to nrf51422-qfaa, nrf24le1, nrf51822-qfaa/ab, with integrated harmonic filter.
50 Ω nominal input / conjugate match balun to nrf51422-qfaa, nrf24le1, nrf51822-qfaa/ab, with integrated harmonic filter Description Datasheet production data Features 50 Ω nominal input / conjugate match
Johanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets. November 2009
Johanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets November 2009 1. Introduction The nrf24l01/nrf24l01+ from Nordic Semiconductor is a 2.45GHz one chip, ultra
SAW Components Data Sheet B4926
Features Low-loss IF filter for mobile telephone Channel selection in GSM systems Hermetically sealed ceramic SMD package Balanced and unbalanced operation possible No coupling coil required Terminals
June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]
![June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]](/thumbs/86/94114379.jpg "June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 824-960MHz 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 824-960MHz Conformity to RoHS Directive SHAPES
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]
![October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]](/thumbs/89/98061837.jpg "October Common Mode Filters. For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s October 2014 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI) MCZ-CH series MCZ1210CH MCZ2010CH [0504 inch]* [0804 inch] * Dimensions Code JIS[EIA]
AM3089 Filter Bank. Description. Functional Diagram. Features. Characteristic Performance. Analog Tunable 2.0 to 18.0 GHz Bandpass
Insertion Loss (db) AM3089 Filter Bank Description AM3089 is an analog voltage-tunable bandpass filter bank covering the 2.0 to 18.0 GHz frequency range. Six bandpass filters with SP6T switches on the
Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS)
MEMO/08/763 Brussels, 3 December 2008 Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS) What is RoHS about? The
Model X3DC18E2S Rev B
b Doherty Combiner Description The X3DC18E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC18E2S is designed particularly
Thin-Film Directional Couplers
DB6N 9 Couplers GENERAL DESCRIPTION RFAP TECHNOLOGY The DB6N 9 Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and
ACX Advanced Ceramic X
FB2012 Series Multilayer Chip Band Pass Filter + Balun Features Monolithic SMD with small, low-profile and light-weight type. Applications 0.8 ~ 6 GHz wireless communication systems, including DECT/PACS/PHS/GSM/DCS
GP2Y0D21YK0F. Distance Measuring Sensor Unit Digital output (24 cm) type GP2Y0D21YK0F
GP2Y0D21YK0F Distance Measuring Sensor Unit Digital output (24 cm) type Description GP2Y0D21YK0F is a distance measuring sensor unit, composed of an integrated combination of PSD (position sensitive detector),
ZWD100PAF. Conformity to RoHS Directive
SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
ZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
NEC's NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (800 mw) 3-PIN POWER MINIMOLD (34 PACKAGE)
NEC's NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (8 mw) 3-PIN POWER MINIMOLD (34 PACKAGE) FEATURES THIS PRODUCT IS SUITABLE FOR MEDIUM OUTPUT POWER (8 mw) AMPLIFICATION PO = 29 dbm TYP.
June Multilayer Low Pass Filter. For MHz DEA161990LT-1182A8
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 1710-1990MHz Multilayer Low Pass Filter For 1710-1990MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS [Top view] 1.60±0.15 (2) 0.80±0.10
SPECIFICATION. Part No. : WLP A.02. Product Name : 2450MHz Patch Antenna
SPECIFICATION Part No. : WLP.2450.25.4.A.02 Product Name : 2450MHz Patch Antenna Features : 5dBi Peak gain Pin Type Automotive TS16949 Production and Quality Approved 25mm*25mm*4.5mm ROHS Compliant Photo
Agilent 1GG Packaged 13.5 GHz GaAs Diode Limiter
Agilent 1GG5-8205 Packaged GaAs Diode Limiter TC626P Data Sheet Features ESD Protection: 3000V Human Body Model Insertion Loss: 1.0 db Typ. Port Match: S 11 and S 22 15 db Typ. Power Handling: P 1dB 25
April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
![April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]](/thumbs/89/98743824.jpg "April Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s April 2014 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM1608G [0202 inch]* [0603 inch] * Dimensions Code JIS[EIA]
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
5 V AGC AMPLIFIER + VIDEO AMPLIFIER
5 V AGC AMPLIFIER + VIDEO AMPLIFIER UPC327GV UPC328GV FEATURES ON-CHIP LOW DISTORTION AMPLIFIER: IIP3 = -4 dbm at minimuim gain WIDE AGC DYNAMIC RANGE: GCR = 53 db TYP ON-CHIP VIDEO AMPLIFIER: VOUT =.25
FEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016
![TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016](/thumbs/81/84143597.jpg "TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016")
R F C o m p o n e n t s August 216 Multilayer Triplexer For 156-166MHz / 24-25MHz / 49-595MHz TPX2595MT-71A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Triplexer For 156-166MHz / 24-25MHz
Coaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
![September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]](/thumbs/82/86818293.jpg "September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s September 16 Multilayer Diplexer For 2-MHz / 49-59MHz DPX59DT-612A1 1.x.5mm [EIA 2]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 2-MHz / 49-59MHz Conformity to RoHS Directive
0.5-4 GHz 6-Bit Digital Attenuator
.5-4 GHz 6-Bit Digital Attenuator Features Frequency Range :.5 to 4 GHz 31.5dB Attenuation Range.5dB resolution 4.5 db Insertion loss max. +.4dB Attenuation Error 5Ω Impedance 1 Typical Phase variation.2
3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER
3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER UPC277TB FEATURES HIGH GAIN: 2 db at 9 to MHz Typical HIGH OUTPUT POWER: PSAT = +2. dbm at 9 MHz + dbm at MHz LOW BIAS VOLTAGE: 3. V Typical, 2.7 V Minimum
October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/91/106422637.jpg "October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s October 2017 Multilayer Band Pass Filter For 4920 5950MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4920 5950MHz Conformity to RoHS Directive
SAW Filters for Automotive Electronics
SAW Filters for Automotive Electronics Series/Type: The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last Orders Last
Development of Small-Capacity UPS "SANUPS A11G-Ni"
New Products Introduction Development of Small-Capacity UPS "SANUPS A11G-Ni" Yutaka Kamakura Hitoshi Yoshiike Hideaki Miyajima Hideaki Matsuo Hidenori Takizawa 1. Introduction 2. Background to development
TGL2226-SM GHz 6-Bit Attenuator
Applications Commercial and Military Radar Electronic Warfare Satellite Communications Point to Point Radio General Purpose Product Features Functional Block Diagram Frequency Range:.1-15 GHz 6-Bit Digital
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
SKY LF: GHz Two-Way, 0 Degrees Power Divider
DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:
3V OPERATION SILICON LDMOSFET RF POWER AMPLIFIER INTEGRATED CIRCUIT FOR 1.9 GHz PHS AND 2.4 GHz APPLICATIONS
DESCRIPTION The µpd572tu is a silicon laterally diffused (LD) MOSFET IC designed for use as power amplifier 1.9 GHz PHS and 2.4 GHz applications. This IC consists of two stage amplifiers. The device is
March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/82/85702642.jpg "March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s March 17 Multilayer Diplexer For 824-96MHz / 171-217MHz DPX217DT-449A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 824-96MHz / 171-217MHz Conformity to
RF V to 4.2V, 2.4GHz Front End Module
3.0V to 4.2V, 2.4GHz Front End Module Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm TXCT _BAIS GND NC 15 14 13 12 11 Features TX Output Power: 23dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 3dB Integrated
July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/85/91663949.jpg "July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 15 Multilayer Diplexer For -2496MHz / 49-59MHz DPX1659DT-8126A1 1.6x.8mm [EIA 63]* * Dimensions Code JIS[EIA] Multilayer Diplexer For -2496MHz / 49-59MHz Conformity to RoHS
SPECIFICATION. : FXP832 Freedom Wi-Fi 2.4GHz and 4.9-6GHz Dipole Antenna Features
SPECIFICATION Part No. Product Name : FXP832.03.0458D : FXP832 Freedom Wi-Fi 2.4GHz and 4.9-6GHz Dipole Antenna Features : Flexible Very High Efficiency 42mm*7mm*0.1mm Ground-plane Independent 458mm (18
High Frequency Ceramic Solutions
Page 1 of 5 General Specifications Part Number Frequency (MHz) Unbalanced Impedance Differential Balanced Impedance 2450BM15B0002 2400-2500 50 Ω Conjugate match to TI Chipset 2520 Differential Mode Attenuation
June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/85/91341795.jpg "June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 470-770MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 470-770MHz Conformity to RoHS Directive SHAPES
July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/86/93201016.jpg "July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 2015 Multilayer Band Pass Filter For 4900-5825MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4900-5825MHz Conformity to RoHS Directive
RKE SERIES Single phase input / single output 1500W
RKE SERIES Single phase input / single output 1500W 5 Features Ultracompact highcapacity frontend power supply Meeting the standards for the harmonics current limiter Complying with the semiconductorprocess
July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/77/76227594.jpg "July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 215 Multilayer Diplexer For 2-2MHz / 49-59MHz DPX259DT-918A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 2-2MHz / 49-59MHz DPX259DT-918A1 Conformity
Recommended Land Pattern: [mm] 1,3
![Recommended Land Pattern: [mm] 1,3](/thumbs/93/114348351.jpg "Recommended Land Pattern: [mm] 1,3")
Dimensions: [mm] Recommended Land Pattern: [mm] 1,3 0,65 ±0,05 0,2 ±0,1 0,35 ±0,1 0,95 ±0,1 0,3 ±0,1 0,3 +0,1-0,2 1,25 ±0,1 1 Electrical Properties: 0,35 Properties Test conditions Value Unit Tol. Frequency
ML485-G. Applications. Functional Block Diagram. Product Features. General Description. Pin Configuration. Ordering Information
RFMD + TriQuint = Qorvo ML 1.-3.2 GHz High IP3 Mixer with Integrated LO Amp Applications PCS / 3G Base station / Repeaters WCDMA / LTE WiMax / WiBro ISM / Fixed Wireless HPA Feedback Paths Product Features
GHz Low-Noise Amplifier SST12LN01
FEATURES: SST2L APPLICATIONS: Suitable Gain: Typically 4 db gain across 2.4 2.5 GHz Low-Noise Figure: Typically.55 db across 2.4 2.5 GHz IIP3: >dbm across 2.4 2.5 GHz Low-Current Consumption -2 ma across
June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/96/128240000.jpg "June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 4900 5850MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4900 5850MHz Conformity to RoHS Directive
Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification
Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification 1. Features: 2.4GHz applications Bluetooth, WiFi, Zigbee, ISM. Ultra small ceramic chip solution. High Efficiency. SMD mounted.
MEA-PE series. 3-terminal Filters, SMD Array. For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) October 2013
E M C C o m p o n e n t s October 2013 3-terminal Filters, SMD Array For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-PE series MEA1210PE MEA1608PE MEA2010PE 1210[0504
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
AMCA R450G-S1F-T3 Pb
FEATURES APPLICATIONS 2450MHz, bandwidth 90MHz Small size - 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) Gain 0.5dBi (Peak) / -1dBi (Average) VSWR
Features. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T